Commit Graph

9932 Commits

Author SHA1 Message Date
Jeff Epler f83212314e
synthio: Add LFOs 2023-05-15 21:15:39 -05:00
Dan Halbert 827eaeb1f9
Merge pull request #7962 from tannewt/inky_frame_5_7
Add Pimoroni Inky Frame 5.7
2023-05-12 18:22:42 -04:00
Scott Shawcroft ca01200b4f
Merge pull request #7965 from dhalbert/stm-rtc-monotonic
STM: monotonic time even when RTC is changed
2023-05-12 13:43:13 -07:00
Dan Halbert e8067851f5 fix subticks handling 2023-05-12 14:39:57 -04:00
Scott Shawcroft 0a3faf8c9d
Merge pull request #7959 from jepler/synthio-bend-pan-ring
Synthio: next round of features
2023-05-12 08:54:49 -07:00
Scott Shawcroft db8bd56c6c
Merge pull request #7946 from anecdata/ap_ipv4
Allow Access Point static IPv4 on the espressif port
2023-05-12 08:47:07 -07:00
Scott Shawcroft 02d4c8153b
Merge pull request #7953 from jepler/issue7944-v3
Fix some regressions on feather M7
2023-05-12 08:34:39 -07:00
Bojan Potočnik 74624e7c22
Add missing ESP32-S3 pins to microcontroller module
ESP32-S3 defines two additional general use pins in
ports/espressif/peripherals/esp32s3/pins.h, for which
support is missing in the microcontroller module HAL.
2023-05-12 09:10:26 +02:00
Dan Halbert 0b2f857542 STM: monotonic time even when RTC is changed 2023-05-12 00:28:37 -04:00
Jeff Epler 5a5474b5dc
mimxrt: 101x: MIDI_RX_BUFSIZE must be 512
It's not clear why this is required, but otherwise it stops
midi_intest1 from ever receiving any MIDI events.

Closes: #7944
2023-05-11 21:47:54 -05:00
Jeff Epler 137e55696e
Merge pull request #7964 from tannewt/fix_imx_usb_reset
Correct pad count.
2023-05-11 21:47:36 -05:00
Scott Shawcroft a56174dc10
Correct pad count.
This prevents running into the pins that cannot be reset. On 1011
it was off by one pin that isn't attached to the package. So,
having the USB pins forbidden prevented resetting to a NULL address.

Fixes #7952
2023-05-11 15:02:56 -07:00
Dan Halbert d99b0634f7 Report SPI frequency accurately on Espressif 2023-05-11 16:57:07 -04:00
Jeff Epler 23baf02399
synthio: disable on a few boards where it doesn't fit 2023-05-11 15:22:48 -05:00
Scott Shawcroft cbfb2d0f55
Add Pimoroni Inky Frame 5.7
Tweak DTCM and ITCM loading and prevent epd refresh while waiting
for autoreload.
2023-05-11 12:12:34 -07:00
Alex Sirota 55d8f0db4e Add board.DISPLAY to hack_club_sprig 2023-05-10 11:24:26 -07:00
anecdata 29bf64decb raspberrypi common-hal f(x)s Not Implemented 2023-05-08 22:41:33 -05:00
Scott Shawcroft 9e4dea7b15
Merge pull request #7933 from jepler/synthio-note
synthio: add 'Note' with arbitrary frequency and more
2023-05-08 13:32:37 -07:00
anecdata 2f2a9e7e28 Allow Access Point static IPv4 on the espressif port. 2023-05-08 13:25:52 -05:00
Scott Shawcroft 7cd65ffb40
Merge pull request #7942 from furbrain/main
Add memorymap support to nrf boards
2023-05-08 10:42:29 -07:00
Phil Underwood bcd9d6bacc Add memorymap to nrf52840 devices only 2023-05-07 18:21:22 +01:00
Phil Underwood fe90cc759a remove excess line 2023-05-07 16:09:44 +01:00
Phil Underwood a31dc5cc70
Merge branch 'adafruit:main' into main 2023-05-07 16:07:16 +01:00
Phil Underwood 3abcc6a2c3 Add memorymap support for the nRF processors.
This gives very permissive access to the internals of the microprocessor.
It needs the user to be **very** careful that they do not break things
2023-05-07 15:58:25 +01:00
RetiredWizard a52d0c742e Add call to rtc_reset 2023-05-06 03:16:38 -04:00
Kattni 018f15de95
Merge pull request #7938 from jepler/issue5980
Fix crash with fast ping on espressif
2023-05-05 18:52:02 -04:00
Jeff Epler 66411fdd38
espressif: check return value from esp_ping_new_session
esp_ping_new_session can fail, particularly if ping is called quickly
many times in succession.

This is because `esp_ping_new_session` has to do a bunch of stuff
including creating a task and a socket. Calling `esp_ping_delete_session`
doesn't clean up these resources immediately. Instead, it signals the
task to clean up resources and exit 'soon', but 'soon' is defined as 1
second.

When the calls are frequent, the in-use sockets and tasks fill up
available slots—I didn't actually check which resource gets used
up first.

With this change, the ping call will raise an exception instead of
continuing with a call to esp_ping_start that crashes.

Closes #5980 based on my testing on an ESP32S3-N8R2.
2023-05-05 17:11:03 -05:00
Scott Shawcroft fa9b59d14c
Merge pull request #7915 from RetiredWizard/picodvi
Add Pimoroni Pico dv Demo Base (pico only)
2023-05-04 10:07:48 -07:00
Jeff Epler eebd4a7f52
synthio: no longer fits on feather m4 can 2023-05-04 10:16:58 -05:00
Jeff Epler a388a59543
rp2040: fix audio glitch at soft-reload
The internal flash cache wasn't being properly used, because
`write_blocks` unconditionally performed the flash write.

Fixing this so that the write's not done until `internal_flash_flush`
fixes the problem in my test program with i2sout & synthio.

as a future optimization, `flash_read_blocks` could learn to read out
of the cache, but that's probably not super important.
2023-05-04 08:41:23 -05:00
Jeff Epler a7da245ad0
synthio: Add synthio.Note
This class allows much more expressive sound synthesis:
 * tremolo & vibrato
 * arbitrary frequency
 * different evelope & waveform per note
 * all properties dynamically settable from Python code
2023-05-04 07:23:49 -05:00
RetiredWizard 4f7d88676b Remove pico-w version 2023-05-03 17:30:01 -04:00
Jeff Epler bd9aca2526
Merge pull request #7862 from jepler/synthio-envelope
Synthio envelope
2023-05-03 12:42:56 -05:00
Liz 480c4f1081
Update pins.c 2023-05-02 17:27:53 -04:00
Liz facd3a4e78 Updating directory name 2023-05-02 17:07:49 -04:00
Liz cba7a812fc Minor update for Feather RP2040 ThinkInk
hihi - updating board name from EPD to ThinkInk and adding pin def for board.BUTTON
2023-05-02 17:02:59 -04:00
Scott Shawcroft 750615f2da
Merge pull request #7430 from Lanzaa/rp2040_cpu_frequency
Add frequency setting for RP2040 boards.
2023-05-02 09:52:28 -07:00
Scott Shawcroft 488dca565f
Merge pull request #7922 from tannewt/dvi320
Take in framebuffer resolution, not output res
2023-05-02 09:22:51 -07:00
Jeff Epler 80e1418c01
Merge pull request #7921 from tannewt/imx_evks
Add additional iMX RT support
2023-05-02 07:09:50 -05:00
Scott Shawcroft 051540f8da
Fix broadcom NAN 2023-05-01 11:38:13 -07:00
Scott Shawcroft 0aa71ed6e6
Tweak the picodvi docs and arg checking 2023-05-01 11:30:04 -07:00
Scott Shawcroft b08714bb8f
Take in framebuffer resolution, not output res
Fixes #7911
2023-04-28 17:13:17 -07:00
Scott Shawcroft 1a4e1d114c
Merge pull request #7916 from bablokb/badger_2040_w
Add support for Pimoroni Badger2040W
2023-04-28 16:42:03 -07:00
Scott Shawcroft 8104b824e0
Standardize CPU temp and voltage. Add autogen warning 2023-04-28 16:19:43 -07:00
RetiredWizard 1fb6d4d77e I2S pin names per Dan's suggestions on iMX PR 2023-04-28 16:58:39 -04:00
Scott Shawcroft f837f2438a
Update USB PIDs 2023-04-28 11:16:45 -07:00
Scott Shawcroft a9dc31a881
Add additional iMX RT support
This adds a script to generate the peripherals files (except clock).

It adds support for the 1015, 1020, 1040, and 1050 EVKs.

Some work was started on 1176 but it isn't working. So, the board
def is in a separate branch.

Fixes #3521. Fixes #2477.
2023-04-28 11:01:13 -07:00
Bernhard Bablok 14c17224a1 update product-id 2023-04-28 08:57:22 +02:00
Bernhard Bablok 4f8ae14c18 update to upstream version 2023-04-28 08:56:52 +02:00
Bernhard Bablok a86c5f7310 Merge branch 'main' into plasma2040w 2023-04-28 08:41:02 +02:00