Commit Graph

77 Commits

Author SHA1 Message Date
Jim Mussared 18d0e6d0db esp32/Makefile: Add link to build troubleshooting on failure.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-15 12:22:18 +10:00
Jim Mussared 19f5da9e1b esp32/Makefile: Force micropython-lib as a required submodule.
Also use mkrules.mk's submodule target rather than duplicating the call to
`submodule sync`.

Until we can find a way to use idf.py/cmake to discover submodules we have
no way to discover optional or board-specific submodules so need to err on
the side of including everything.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-08-03 00:07:35 +10:00
Jim Mussared be83c08f46 ports: Always append to GIT_SUBMODULES.
Avoids overwriting submodules required by base makefiles.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-08-03 00:05:26 +10:00
Damien George 71b3ce3ace esp32: Create .uf2 binaries for S2 and S3 chips.
The name of the filesystem partition is updated to support "ffat", as used
by TinyUF2.

Signed-off-by: Damien George <damien@micropython.org>
2022-02-02 23:47:49 +11:00
Damien George 3835f5f597 esp32/makeimg.py: Get bootloader and partition offset from sdkconfig.
So that it works on ESP32C3, which has the bootloader at 0x0.

Fixes issue #7565.

Signed-off-by: Damien George <damien@micropython.org>
2021-08-10 00:19:49 +10:00
leo chung fad0efdcf2 esp32/Makefile: Fix wrong target for partition-table.bin.
"$(BUILD)/partition_table/partition  -table.bin" is typing mistake.

Signed-off-by: leo chung <gewalalb@gmail.com>
2021-06-04 01:04:35 +10:00
Steve App 21fee92be6 esp32: Restore FROZEN_MANIFEST support with new CMake build system.
This commit re-enables the command-line make option "FROZEN_MANIFEST".  The
boards/*/mpconfigboard.cmake will now use the command-line FROZEN_MANIFEST
value if supplied.

Usage: make FROZEN_MANIFEST=~/foo/my-manifest.py
2021-04-29 12:34:00 +10:00
Michael O'Cleirigh 0ccd9e08aa esp32: Restore USER_C_MODULE support with new CMake build system.
Support for User C and C++ modules was lost due to upgrading the esp32 to
the latest CMake based IDF from the GNUMakefile build process.

Restore the support for the esp32 port by integrating with the approach
recently added for the rp2 port.

Signed-off-by: Michael O'Cleirigh <michael.ocleirigh@rivulet.ca>
2021-04-01 15:43:15 +11:00
Mike Causer 8785acac22 esp32/Makefile: Specify port and baud on erase_flash command. 2021-03-11 15:49:10 +11:00
Damien George 9f035d6bb7 esp32: Remove traditional "make" capability.
It's now replaced by cmake/idf.py.  But a convenience Makefile is still
provided with traditional targets like "all" and "deploy".

Signed-off-by: Damien George <damien@micropython.org>
2021-02-15 16:37:58 +11:00
stijn fad4079778 esp32,unix: Support building C++ code.
Support building .cpp files and linking them into the micropython
executable in a way similar to how it is done for .c files.  The main
incentive here is to enable user C modules to use C++ files (which are put
in SRC_MOD_CXX by py.mk) since the core itself does not utilize C++.

However, to verify build functionality a unix overage test is added.  The
esp32 port already has CXXFLAGS so just add the user modules' flags to it.
For the unix port use a copy of the CFLAGS but strip the ones which are not
usable for C++.
2020-10-29 15:29:50 +11:00
stijn f1666419a8 py/mkrules.mk: Add target for compiling C++ files.
Move the target from the ESP32 Makefile since that does what is needed
already, but also include files from user C modules as is done for the C
files.
2020-10-29 15:27:18 +11:00
Damien George 1dc64359da esp32: Use path relative to root for netutils/timeutils headers.
Signed-off-by: Damien George <damien@micropython.org>
2020-10-06 12:32:20 +11:00
Jim Mussared ed14435a8e extmod/modbluetooth: Refactor stack/hci/driver/port bindings.
Previously the interaction between the different layers of the Bluetooth
stack was different on each port and each stack.  This commit defines
common interfaces between them and implements them for cyw43, btstack,
nimble, stm32, unix.
2020-09-08 11:41:31 +10:00
Thorsten von Eicken 5264478007 extmod/modussl_mbedtls: Integrate shorter error strings.
The stm32 and esp32 ports now use shorter error strings for mbedtls errors.
Also, MBEDTLS_ERROR_C is enabled on stm32 by default to get these strings.
2020-07-21 00:31:05 +10:00
Jim Mussared 8e8dcdd34b esp32: Update IDF v4.0 supported hash to v4.0.1.
The main fix relevant to MicroPython is https://github.com/espressif/esp-idf/issues/4196

Release notes here
https://github.com/espressif/esp-idf/releases/tag/v4.0.1
2020-06-09 16:15:47 +10:00
stijn 30840ebc99 all: Enable extra conversion warnings where applicable.
Add -Wdouble-promotion and -Wfloat-conversion for most ports to ban out
implicit floating point conversions, and add extra Travis builds using
MICROPY_FLOAT_IMPL_FLOAT to uncover warnings which weren't found
previously.  For the unix port -Wsign-comparison is added as well but only
there since only clang supports this but gcc doesn't.
2020-04-18 22:42:28 +10:00
Damien George f534b99765 esp32: Update to ESP IDF v3.3.2. 2020-04-14 23:30:03 +10:00
Jim Mussared 073b9a5eb8 ports: Enable error text compression for various ports, but not all.
Enabled on: bare-arm, minimal, unix coverage/dev/minimal, stm32, esp32,
esp8266, cc3200, teensy, qemu-arm, nrf.  Not enabled on others to be able
to test the code when the feature is disabled (the default case).

Code size change for this commit:

   bare-arm:  -600 -0.906%
minimal x86:  -308 -0.208%
   unix x64:    +0 +0.000%
unix nanbox:    +0 +0.000%
      stm32: -3368 -0.869% PYBV10
     cc3200: -1024 -0.558%
    esp8266: -2512 -0.368% GENERIC
      esp32: -2876 -0.205% GENERIC[incl -3168(data)]
        nrf: -1708 -1.173% pca10040
       samd:    +0 +0.000% ADAFRUIT_ITSYBITSY_M4_EXPRESS
2020-04-05 15:02:06 +10:00
Damien George c44d52f33e extmod/modbluetooth_nimble: Move nimble specific code, factor nimble.mk.
Move extmod/modbluetooth_nimble.* to extmod/nimble.  And move common
Makefile lines to extmod/nimble/nimble.mk (which was previously only used
by stm32).  This allows (upcoming) btstack to follow a similar structure.

Work done in collaboration with Jim Mussared aka @jimmo.
2020-03-06 12:35:20 +11:00
Jim Mussared a9ce8dfdaa esp32: Move to IDF 4.0 release version. 2020-02-20 00:34:31 +11:00
Jim Mussared 0645478475 esp32/Makefile: Reorder includes to build with latest toolchain.
Tested on:
- IDF3.3.1 (old toolchain)
- IDF4.0-beta1 (old toolchain)
- IDF4.0-beta1 (new toolchain from install.sh / export.sh)
2020-02-04 18:06:14 +11:00
Jim Mussared 3032ae1155 esp32: Enable NimBLE support on all builds (IDF 3.3 and 4.0).
This commit updates the IDFv3 version to v3.3.1, and enables the
"ubluetooth" module by default on IDFv3 builds.
2020-01-15 00:24:43 +11:00
Damien George 99b8c1a937 esp32/Makefile: Assign result of $call to dummy var for older make.
Make version 4.1 and lower does not allow $call as the main expression on a
line, so assign the result of the $call to a dummy variable.

Fixes issue #5426.
2020-01-06 23:03:22 +11:00
Matt Trentini 0e0e6132fd esp32/esp32_rmt: Add initial support for RMT peripheral.
This is an ESP32-specific peripheral so lives in the esp32 module.
2019-12-20 12:24:51 +11:00
Damien George 799b6d1e0c extmod: Consolidate FAT FS config to MICROPY_VFS_FAT across all ports.
This commit removes the Makefile-level MICROPY_FATFS config and moves the
MICROPY_VFS_FAT config to the Makefile level to replace it.  It also moves
the include of the oofatfs source files in the build from each port to a
central place in extmod/extmod.mk.

For a port to enabled VFS FAT support it should now set MICROPY_VFS_FAT=1
at the level of the Makefile.  This will include the relevant oofatfs files
in the build and set MICROPY_VFS_FAT=1 at the C (preprocessor) level.
2019-11-11 11:37:38 +11:00
Damien George 4be316fb07 esp32/moduos: Enable uos.VfsLfs2 for littlefs filesystems.
This commit adds support for littlefs (v2) on all esp32 boards.

The original FAT filesystem still works and any board with a preexisting
FAT filesystem will still work as normal.  It's possible to switch to
littlefs by reformatting the block device using:

    import uos, flashbdev
    uos.VfsLfs2.mkfs(flashbdev.bdev)

Then when the board reboots (soft or hard) the new littlefs filesystem will
be mounted.  It's possible to switch back to a FAT filesystem by formatting
with uos.VfsFat.mkfs(flashbdev.bdev).
2019-11-06 12:16:00 +11:00
Damien George 742030945c esp32/Makefile: Add correct arch to MPY_CROSS_FLAGS for native code. 2019-11-04 15:32:20 +11:00
Damien George ce1de1faf0 esp32: Convert to use FROZEN_MANIFEST to specify frozen code.
All symlinks are removed.  boards/manifest.py is used as a default, and can
optionally use boards/manifest_release.py for more scripts.
2019-10-15 21:37:02 +11:00
Damien George d7a9388fe0 ports: Add new make target "submodules" which inits required modules. 2019-10-15 17:14:41 +11:00
Jim Mussared cd8bbf4cfc esp32/boards: Enable BLE by default when building with IDF 4.x. 2019-10-08 14:50:01 +11:00
Jim Mussared 6a9bd1c1ab esp32: Implement BLE using Nimble from IDF 4.x. 2019-10-08 14:50:01 +11:00
Jim Mussared c33a4cc213 esp32/Makefile: Fix printing of supported git hash. 2019-09-20 14:37:53 +10:00
Jim Mussared f469634c0c esp32: Add check to Makefile that the toolchain is in PATH. 2019-09-17 12:26:47 +10:00
Jim Mussared 970f798ea9 esp32: Add check to Makefile for pyparsing version. 2019-09-17 12:26:42 +10:00
Jim Mussared 96008ff59a esp32: Support building with ESP IDF 4.0-beta1.
This commit adds support for a second supported hash (currently set to the
4.0-beta1 tag).  When this hash is detected, the relevant changes are
applied.

This allows to start using v4 features (e.g. BLE with Nimble), and also
start doing testing, while still supporting the original, stable, v3.3 IDF.

Note: this feature is experimental, not well tested, and network.LAN and
network.PPP are currently unsupported.
2019-09-17 12:25:36 +10:00
Damien George 356a728bd0 esp32/Makefile: Add SDKCONFIG_H to QSTR_GLOBAL_REQUIREMENTS.
Fixes issue #5091.
2019-09-12 18:16:16 +10:00
Braden Mars 5641aa55dd esp32: Update to use ESP IDF v3.3
Includes patches for CVE-2019-12586 & CVE-2019-12587
2019-09-07 01:28:11 -05:00
Jim Mussared 50482cdc0c esp32/Makefile: Fix subst->patsubst in ESPIDF_BOOTLOADER_SUPPORT_O. 2019-09-03 23:21:50 +10:00
Damien George 05eb897d06 esp32: Add esp32.Partition class to expose partition and OTA funcs.
Partitions are exposed as a standard MicroPython block device.
2019-08-20 16:49:18 +10:00
Jim Mussared 8db517f26d esp32: Add per-board configs, following other ports.
Replaces the `SDKCONFIG` makefile variable with `BOARD`.  Defaults to
BOARD=GENERIC.  spiram can be enabled with `BOARD=GENERIC_SPIRAM`

Add example definition for TINYPICO, currently identical to GENERIC_SPIRAM
but with custom board/SoC names for the uPy banner.
2019-08-16 00:22:29 +10:00
Damien George 2ccf030fd1 esp32: Add support for mDNS queries and responder.
They are both enabled by default, but can be disabled by defining
MICROPY_HW_ENABLE_MDNS_QUERIES and/or MICROPY_HW_ENABLE_MDNS_RESPONDER to
0.  The hostname for the responder is currently taken from
tcpip_adapter_get_hostname() but should eventually be configurable.
2019-08-15 16:36:47 +10:00
Damien George 7c15e50eb8 esp32/Makefile: Include CFLAGS_EXTRA in CFLAGS definition.
Following other ports, so builds can be customised more easily, eg on the
command line building with a user C-module.
2019-07-30 17:31:23 +10:00
Damien George e3e7e3a781 esp32/Makefile: Simplify include of IDF source by using wildcards. 2019-07-20 14:07:18 +10:00
Damien George b88e51d718 esp32/Makefile: Put OBJ and LIB rule additions in gen_espidf_lib_rule. 2019-07-20 13:04:55 +10:00
Jim Mussared 331c224e07 esp32/Makefile: Fix path expansion for ESPIDF_DRIVER_O.
It was using subst to s/.c/.o/ which changed .c anywhere in the path.
2019-07-20 12:32:43 +10:00
Damien George a29334761d esp32: Add support for hardware I2C. 2019-07-19 16:31:25 +10:00
Josh Lloyd 2f262d5f9a esp32/Makefile: Include all driver/*.c source files in the build.
Fixes #4869.
2019-06-25 15:12:34 +10:00
Damien George 3ee3995be1 esp32: Update to use ESP IDF v3.3-beta3.
This updates ESP IDF to use v3.3-beta3.  And also adjusts README.md to
point to stable docs which provide a link to download the correct toolchain
for this IDF version, namely 1.22.0-80-g6c4433a-5.2.0
2019-06-19 14:32:15 +10:00
Nicko van Someren 8e3af7d4c8 esp32: Add machine.SDCard class using built-in HW SD/MMC controller.
This adds support for SD cards using the ESP32's built-in hardware SD/MMC
host controller, over either the SDIO bus or SPI.  The class is available
as machine.SDCard and using it can be as simple as:

    uos.mount(machine.SDCard(), '/sd')
2019-06-03 00:37:41 +10:00