a649d72606
py/makeqstrdata: Add special case to handle \n qstr.
2016-04-14 15:22:36 +01:00
2243d68345
py/makeqstrdata: Reinstate Python2 compatibility.
2016-04-14 14:37:04 +01:00
49bb04ee64
py/makeqstrdata: Fix rendering of qstrs that have non-printable ASCII.
...
The qstr data needs to be turned into a proper C string so non-ASCII
chars must be properly escaped according to C rules.
2016-04-14 14:20:25 +01:00
0c1de1cdee
py: Simplify "and" action within parser by making ident-rules explicit.
...
Most grammar rules can optimise to the identity if they only have a single
argument, saving a lot of RAM building the parse tree. Previous to this
patch, whether a given grammar rule could be optimised was defined (mostly
implicitly) by a complicated set of logic rules. With this patch the
definition is always specified explicitly by using "and_ident" in the rule
definition in the grammar. This simplifies the logic of the parser,
making it a bit smaller and faster. RAM usage in unaffected.
2016-04-14 13:49:23 +01:00
0a400a6333
esp8266: Switch integer arith routines to BootROM.
2016-04-14 15:06:07 +03:00
df3b1741b6
esp8266: Separate 1-wire timing funcs from Python module to save iRAM.
...
esponewire.c contains low-level timing-critical functions that go in
iRAM. modonewire.c contains Python wrapper code.
2016-04-14 12:44:26 +01:00
674bf1bc81
esp8266: Add hard IRQ callbacks for pin change on GPIO0-15.
2016-04-14 12:44:26 +01:00
d9d408135d
esp8266: Add dummy entries for non-existing pins to simplify pin logic.
...
Now pins can be easily looked up in the table using the pin number as the
index and vice versa.
2016-04-14 12:43:25 +01:00
a9a732af1f
esp8266: Remove pin_id field from C pin object.
...
This field is the same as phys_port and not needed.
2016-04-14 12:43:25 +01:00
44ab5c3ef1
extmod/modlwip: Start adding debug output.
2016-04-14 01:15:52 +03:00
fef0d9818a
extmod/modlwip: lwip_tcp_receive(): Properly handle EOF for non-blocking sock.
2016-04-14 00:59:09 +03:00
f30b6f0af5
py/makeqstrdata: Add more names for escaped chars and esc non-printable.
...
Non-printable characters are escaped as 0xXX, where XX are the hex
digits of the character value.
2016-04-13 22:12:39 +01:00
59a4fee516
extmod/modwebsocket: Another case to propagate EOF.
2016-04-13 22:17:09 +03:00
733db525e2
stmhal: Add Makefile option FROZEN_MPY_DIR to support frozen bytecode.
2016-04-13 16:07:47 +01:00
f9448ddc2c
minimal: Add example of frozen persistent bytecode (.mpy file).
...
frozentest.py is frozen into the binary as frozen bytecode. The .mpy
file is included so that there is no dependency on the cross compiler.
2016-04-13 16:07:47 +01:00
0a2e9650f5
py: Add ability to have frozen persistent bytecode from .mpy files.
...
The config variable MICROPY_MODULE_FROZEN is now made of two separate
parts: MICROPY_MODULE_FROZEN_STR and MICROPY_MODULE_FROZEN_MPY. This
allows to have none, either or both of frozen strings and frozen mpy
files (aka frozen bytecode).
2016-04-13 16:07:47 +01:00
0699c6bf9e
tools: Add mpy-tool.py, to work with .mpy files.
...
Currently it can freeze .mpy files.
2016-04-13 16:05:43 +01:00
594fa73411
py/makeqstrdata: Factor out some code to functions that can be reused.
2016-04-13 16:05:43 +01:00
ed0c11236f
py/emitglue: Make mp_raw_code_t* arguments constant pointers.
2016-04-13 16:05:43 +01:00
6d24dc23b8
py/emitglue: Move typedef of mp_raw_code_t from .c to .h file.
...
It's needed by frozen bytecode.
2016-04-13 16:05:43 +01:00
c2a519bab9
tests: Skip async tests for native emitter.
2016-04-13 15:56:42 +01:00
7f7e247545
tests: Add .exp files for async tests, so they can run with Python 3.4.
2016-04-13 15:56:15 +01:00
6eb17c31a9
ports: Disable async/await on bare-arm, minimal, pic16bit, cc3200.
...
It costs 1188 bytes of code on Thumb 2 archs.
2016-04-13 15:31:30 +01:00
c33df193bf
tests: Add 6 tests for async await/for/with.
2016-04-13 15:27:06 +01:00
eacbd7aeba
py: Fix constant folding and inline-asm to work with new async grammar.
2016-04-13 15:26:39 +01:00
81ebba7e02
py: add async/await/async for/async with syntax
...
They are sugar for marking function as generator, "yield from"
and pep492 python "semantically equivalents" respectively.
@dpgeorge was the original author of this patch, but @pohmelie made
changes to implement `async for` and `async with`.
2016-04-13 15:26:38 +01:00
959ed931a4
esp8266/esp_mphal: call_dupterm_read(): Fix order of deactivating on EOF.
...
First deactivate, then print diagnostic message.
2016-04-13 16:35:50 +03:00
19e3c9d53a
esp8266/esp_mphal: Don't swallow exceptions in dupterm's read()/write().
...
The idea is that if dupterm object can handle exceptions, it will handle
them itself. Otherwise, object state can be compromised and it's better
to terminate dupterm session. For example, disconnected socket will keep
throwing exceptions and dump messages about that.
2016-04-13 16:34:17 +03:00
54ea253f56
extmod/moduos_dupterm: Don't swallow exceptions in dupterm's read()/write().
...
The idea is that if dupterm object can handle exceptions, it will handle
them itself. Otherwise, object state can be compromised and it's better
to terminate dupterm session. For example, disconnected socket will keep
throwing exceptions and dump messages about that.
2016-04-13 16:34:11 +03:00
47442d9f52
lib/utils/printf: Rework overriding printer of DEBUG_printf().
...
By default it uses mp_plat_print, but a port may override it to another
value with MICROPY_DEBUG_PRINTER_DEST.
2016-04-13 11:53:12 +03:00
22cbcd55f0
stmhal: Properly handle RTS/CTS flow control for buf/unbuf transfers.
...
Fixes issues #1912 and #1913 . UART documentation is also updated.
2016-04-13 08:42:32 +01:00
3177ef544f
esp8266: In callback helpers, pop nlr_buf on successful call.
...
nlr_pop must be called if no exception was raised.
Also, return value of these callback helpers is made void because ther
is (currently) no use for it.
2016-04-13 00:01:28 +01:00
b67d098841
py/modbuiltins: __repl_print__: Add comment about setting "_" special var.
2016-04-13 00:59:41 +03:00
eec8a94f04
extmod/machine_i2c: Implement I2C memory reading/writing.
2016-04-12 15:52:17 +01:00
9314b2df4f
extmod/machine_i2c: Fix I2C reading by sending ack/nack at end of byte.
2016-04-12 15:46:13 +01:00
73bc0c24ab
drivers: Add SSD1306 OLED driver, with I2C and SPI interfaces.
2016-04-12 14:06:54 +01:00
e813ea1070
esp8266: Enable framebuf module.
2016-04-12 14:06:54 +01:00
a525493e40
esp8266: Switch from using custom I2C driver to generic extmod one.
2016-04-12 14:06:54 +01:00
ac63ca7bc5
esp8266: Implement basic C-level pin HAL.
2016-04-12 14:06:54 +01:00
1a65ff1b72
esp8266: Protect modpyb.h header file from multiple inclusions.
...
Also include py/obj.h so the header is self contained.
2016-04-12 14:06:54 +01:00
67a327cb9b
stmhal: Enable framebuf module.
2016-04-12 14:06:54 +01:00
e4f963a351
stmhal: Use new generic I2C object in machine module.
2016-04-12 14:06:54 +01:00
69a1aaf654
stmhal: Implement basic C-level pin HAL.
2016-04-12 14:06:54 +01:00
d083712224
extmod: Add generic machine.I2C class, with bit-bang I2C.
...
Should work on any machine that provides the correct pin functions.
2016-04-12 14:06:54 +01:00
53ad681ed1
extmod: Add initial framebuf module.
2016-04-12 14:06:53 +01:00
3a37426b29
esp8266/scripts/inisetup.py: Use "-" in AP ESSID instead of space.
2016-04-12 00:47:21 +03:00
260b839483
esp8266/scripts/inisetup.py: Set WPA/WPA2 AP mode with a predefined password.
2016-04-12 00:46:04 +03:00
40f5ecd3a8
esp8266: Add Python modules for initial configuration.
...
Main entry point is _boot.py which checks whether FAT FS in flash mountable,
and if so, mounts it. Otherwise, it checks if flash is empty, and if so,
performs initial module setup: makes FAT FS, configures default AP name,
etc. As a last option, if flash is not empty, and could not be mounted,
it means filesystem corruption, and warning message with instructions is
printed in an infinite loop.
2016-04-12 00:37:04 +03:00
2f5935269b
esp8266/scripts/main.py: Remove stale file.
2016-04-12 00:35:13 +03:00
54b89665fc
esp8266/modnetwork: .config(): Add "password" param (W/O).
2016-04-12 00:18:40 +03:00
Damien George
Paul Sokolovsky
pohmelie
Peter Hinch