Commit Graph

102 Commits

Author SHA1 Message Date
Damien George b56caaf104 travis: Build NUCLEO_L073RZ instead of B_L072Z_LRWAN1 for stm32 job.
The NUCLEO_L073RZ build is slightly bigger and this MCU has only 192k flash
so this helps to catch flash overflow.
2020-03-28 13:56:16 +11:00
David Lechner 6c77d5c7cd travis: Use grep with --text on qemu-arm output.
If the .out file contains non-text characters, grep won't show the output
unless we ask nicely.
2020-03-28 13:29:54 +11:00
David Lechner 0608fbff29 travis: Use custom PPA to get pre-built uncrustify.
Use PPA so that we don't have to rebuild uncrustify from source, speeding
up the job.  This also requires not running this test on arm64.
2020-03-28 11:40:47 +11:00
Damien George 3667effff1 travis: Exclude some uasyncio tests on OSX. 2020-03-26 01:25:45 +11:00
Damien George 98ab7643a7 travis: Print errors out for OSX job. 2020-03-26 01:21:04 +11:00
Damien George ab00f4c44e qemu-arm: Set default board as mps2-an385 to get more flash for tests.
And use Ubuntu bionic for qemu-arm Travic CI job.
2020-03-26 01:21:04 +11:00
Damien George f552451cba travis: For unix tests use Makefile target instead of explicit commands. 2020-03-11 20:20:18 +11:00
Damien George bd50651567 travis: Run multi_net tests as part of coverage job. 2020-03-10 02:22:34 +11:00
Damien George ecee6f2877 travis: Build stm32 PYBD_SF6 with BTstack as bluetooth stack. 2020-03-10 01:53:42 +11:00
Damien George f6375ac3eb travis: Add CI job to check code formatting.
The CI job will fail if there is any code which does not conform to the
style encoded by tools/codeformat.py.  And it will list any changes
required.

uncrustify is built from source because Ubuntu bionic has uncrustify-0.66.1
which is from 2017/11/22 and is missing many options needed here.
2020-02-28 10:34:17 +11:00
stijn 2d800c77a0 travis: Add OSX build to CI.
Add a standard unix port build in an OSX environment using clang.  Should
help in catching build failures due to platform differences early on.
2020-02-21 14:20:52 +11:00
Damien George baf11f237b unix/Makefile: Remove old variant targets that are no longer needed.
To eliminate confusion about what targets to use when building.
2020-02-16 00:15:57 +11:00
Jim Mussared 3032ae1155 esp32: Enable NimBLE support on all builds (IDF 3.3 and 4.0).
This commit updates the IDFv3 version to v3.3.1, and enables the
"ubluetooth" module by default on IDFv3 builds.
2020-01-15 00:24:43 +11:00
Jim Mussared 977b532c8f unix: Rename unix binaries to micropython-variant (not _variant).
For consistency with mpy-cross, and other unix tools in general.
2020-01-12 10:37:40 +11:00
Jim Mussared 7319d546b7 travis: Update travis to specify which unix variant to build. 2020-01-12 10:37:33 +11:00
Damien George e83ab7374b travis: Add stm32 build in nanbox mode. 2019-12-27 22:54:53 +11:00
Damien George 11b4524b39 travis: Add new job to build and test unix coverage in 32-bit mode. 2019-12-27 12:30:51 +11:00
Damien George 4da763fc49 travis: Build urandom native module in coverage job. 2019-12-13 13:33:45 +11:00
Damien George ac769672fd travis: Add tests for building and importing dynamic native modules. 2019-12-12 20:15:28 +11:00
Damien George 162016ad9c travis: Add job to build and test unix minimal port.
To test that unix minimal port builds, and that test-suite can run with
minimal features enabled.
2019-10-29 22:23:00 +11:00
Michael Neuling 079cc940a6 powerpc: Add initial port to bare metal PowerPC arch.
Runs in microwatt (GHDL and FPGA) and qemu.

Port done initially by Michael Neuling, with help from Anton Blanchard and
Jordan Niethe.
2019-10-22 22:45:33 +11:00
Damien George f562f94e1c travis: Use "make submodules" to init required modules for each port. 2019-10-15 17:14:41 +11:00
Mike Causer 3117fde407 travis: Add esp8266 GENERIC_512K build to CI. 2019-10-10 16:32:25 +11:00
Jim Mussared fa23033fc4 travis: Add BLE submodules to ESP32 IDF4 build. 2019-10-08 14:52:31 +11:00
Damien George deef6f3718 travis: Build unix nanbox with PYTHON=python2.
To test build support with Python 2.7.
2019-10-05 23:11:47 +10:00
Jim Mussared d72dbb822c stm32: Provide port-specific implementation for Nimble on STM32. 2019-10-01 09:51:02 +10:00
Damien George 6647d03e42 travis: Build more stm32 boards to cover all supported MCUs. 2019-09-26 16:43:34 +10:00
Jim Mussared b1505541da travis: Add ESP32 build with IDF v4. 2019-09-17 12:26:35 +10:00
Damien George 0b85b5b8b3 travis: Add new job to test unix port with sys.settrace enabled. 2019-08-30 16:49:13 +10:00
Damien George 8f55a8fab6 travis: Build an stm32 board with threading enabled to test it with CI. 2019-07-26 12:44:47 +10:00
Damien George a67d9155e6 travis: Switch unix stackless build to use clang.
To test a different compiler, other than gcc.
2019-07-17 15:52:27 +10:00
Damien George 14f61a224d travis: Build stm32 mboot for PYBD_SF6 as part of CI. 2019-07-09 11:47:57 +10:00
Damien George 9ca4789130 travis: Add samd port to Travis build. 2019-07-01 17:19:18 +10:00
Damien George 9cebead276 travis: Enable performance benchmark tests on standard unix build. 2019-06-28 16:30:01 +10:00
Damien George e06dcad5d3 travis: Build esp32 firmware as part of Travis CI.
Toolchain installation and build takes about 3 minutes.
2019-06-25 14:55:10 +10:00
Damien George cc12f750b4 travis: Build esp8266 firmware as part of Travis CI.
Toolchain installation and build takes about 1 minute.
2019-06-25 14:55:10 +10:00
Damien George c60e0a09f0 travis: Selectively fetch git submodules only when needed.
This saves time when building on Travis CI: unconditionally fetching all
submodules takes about 40 seconds, but not all are needed for any given
port, so only fetch as necessary.
2019-06-25 14:55:10 +10:00
Damien George 84f1067f7f travis: Build PYBD_SF2 board as part of the stm32 job. 2019-05-31 22:47:55 +10:00
Damien George 2bcb240b55 travis: Enable test for running native code via mpy. 2019-03-08 16:51:09 +11:00
Damien George 775c7b86f0 travis: Update to use Ubuntu 16.04 Xenial for CI builds. 2019-02-12 13:29:22 +11:00
Damien George b7004efe36 travis: Add nrf port to Travis CI build. 2018-07-20 14:11:28 +10:00
Damien George 3ffcef8bdf travis: Use build stages and parallel jobs under Travis CI.
This change brings the following benefits:

- all existing tests and test behaviour is be retained
- can now use Travis parallel build mechanism
- total time for tests is about 5 mins 30 secs, down from around 10 mins
- two additional test suites are now run: standard (non coverage) unix
  build and nanbox unix build
- much easier to see what is failing: if you click through to the Travis CI
  details each parallel build job is displayed with pass/fail
- scales much better when adding new test targets
2018-07-19 10:04:57 +10:00
Damien George b789c640f7 travis: Install explicit version of urllib3 for coveralls.
Coveralls requires a "recent" version of urllib3, whereas requests requires
a "not so recent" version, less than 1.23.  So force urllib3 v1.22 to get
it all working.
2018-06-06 20:56:24 +10:00
Damien George 5e1279d41a travis: Pass -j4 to make to speed up compilation.
This seems to reduce the Travis build time by roughly 1 minute / 10%.
2018-03-19 11:57:38 +11:00
Damien George 0b12cc8feb .travis.yml,ports/unix/Makefile: Add coverage test for script via stdin. 2018-02-08 11:30:19 +11:00
Paul Sokolovsky 5455bf79c5 .travis.yml: Build and test strict stackless build.
Previously, testing of stackless build happened (manually) in
travis-stackless branch. However, stackless offers important
featureset, so it's worth to test it as a part of the main
CI. Strict stackless is used because it's the "real" stackless
build, which avoids using C stack as much as possible (non-strict
just prefers heap over C stack, but may end up using the latter).
2017-12-16 20:43:30 +02:00
Paul Sokolovsky 8462f167dc .travis.yml: Update for qemu-arm's testing moved to Makefile.test. 2017-12-13 09:07:51 +02:00
Damien George 06f2fdbe61 travis: Update build command now that stm32 Wiznet config has changed. 2017-10-16 15:51:32 +11:00
Damien George de981040b3 travis: Use --upgrade when pip is installing cpp-coveralls.
So that the latest urllib3 is retrieved, which has improved SSL security.

This fixes the temporary path from f578947ae3
2017-09-10 22:57:33 +10:00
Damien George 4a93801c12 all: Update Makefiles and others to build with new ports/ dir layout.
Also renames "stmhal" to "stm32" in documentation and everywhere else.
2017-09-06 14:09:13 +10:00