dd5d7c86d2
Fix up end of file and trailing whitespace.
...
This can be enforced by pre-commit, but correct it separately to make it easier to review.
2020-06-03 10:56:35 +01:00
796373b8be
A number of small ESP32S2 fixes:
...
* Fix flash writes that don't end on a sector boundary. Fixes #2944
* Fix enum incompatibility with IDF.
* Fix printf output so it goes out debug UART.
* Increase stack size to 8k.
* Fix sleep of less than a tick so it doesn't crash.
2020-05-28 15:43:55 -07:00
3574670226
Merge pull request #2931 from tannewt/esp32s2_digitalio
...
Finish digitalio and pin use tracking for ESP32S2
2020-05-26 19:18:45 -04:00
c917270da7
Merge pull request #2956 from hathach/fix-samd-wfi
...
fix racing issue for SAMD when executing WFI
2020-05-26 14:54:24 -07:00
ffe0e0edc3
Merge pull request #2938 from DavePutz/issue2894
...
Add an increment to tcc_refcount to allow deinit to work correctly
2020-05-26 14:39:59 -07:00
665fe7a839
Merge pull request #2945 from pewpew-game/fluff_m0
...
Add support for Fluff M0
2020-05-26 13:18:55 -07:00
2ffd70417d
Merge remote-tracking branch 'adafruit/master' into esp32s2_digitalio
2020-05-26 13:09:57 -07:00
4974c933b1
Fix swapped SCK and MISO in Fluff M0
2020-05-26 03:29:05 +02:00
e79340601f
fix racing issue for SAMD when executing WFI
2020-05-25 20:51:02 +07:00
5cffd7e88d
trinket_m0_haxpress: disable RTC to make build fit with upcoming translations
2020-05-23 20:48:38 -05:00
eb85304d04
escornabot: disable RTC to make build fit with upcoming translations
2020-05-23 20:48:38 -05:00
03866c0598
meowmeow: disable modules to make build fit with upcoming translations
2020-05-23 20:41:25 -05:00
2ed40075a5
pyruler: disable RTC to make build fit with upcoming translations
2020-05-23 20:36:33 -05:00
4c01ddcbab
Add support for Fluff M0
2020-05-22 18:51:12 +02:00
2e05f628f0
Add an increment to tcc_refcount to allow deinits to work properly
2020-05-21 11:08:26 -05:00
3bb6a32a20
Merge branch 'master' into esp32s2_digitalio
2020-05-21 08:52:39 -07:00
4f54514be4
Initial version
2020-05-20 21:11:06 -05:00
ba724fffb4
Merge remote-tracking branch 'adafruit/master' into esp32s2_digitalio
2020-05-20 10:48:27 -07:00
fd0420d432
Update digitalio api for other ports
2020-05-20 09:23:42 -07:00
916ca9f8a6
Merge pull request #2910 from tannewt/esp32s2
...
Add initial ESP32S2 support
2020-05-19 12:53:23 -07:00
acf4b1bede
Remove reverse methods from per-board defs
2020-05-19 11:43:57 -07:00
9eb85a5feb
shrink Xinabox CS11 by turning off unused pins
2020-05-19 10:55:02 -07:00
2c2b53303d
Merge pull request #2837 from k0d/serial-debug
...
Add support for a debug console, such as ST-Link VCP.
2020-05-18 18:13:31 -07:00
007c92ee6a
Enable showing the console on a debug uart
2020-05-19 02:02:52 +02:00
cf690bd390
Merge remote-tracking branch 'adafruit/master' into esp32s2
2020-05-18 16:46:41 -07:00
9811c1fe4b
Merge pull request #2896 from theacodes/add-bytearray-decode
...
Add bytearray.decode() for CPython compatibility
2020-05-18 14:38:45 -07:00
e175a64036
disable rotaryio in CPX crickit
2020-05-15 20:35:12 -04:00
8edb8e87c8
Turn reverse methods off for trinket haxpress
2020-05-15 17:22:22 -07:00
86f865afe0
Turn reverse methods off for cpx_crickit
2020-05-15 16:42:22 -07:00
6aaab005c5
Initial ESP32S2 port.
...
Basic blinky works but doesn't check pins.
2020-05-15 15:36:16 -07:00
a3ca9401b4
Shrink crickit build
2020-05-15 18:29:37 -04:00
0d8bca92e2
Merge pull request #2810 from dherrada/master
...
Pyi integration
2020-05-15 10:31:05 -07:00
db4dbe0752
Merge pull request #2889 from jepler/gamepad-tick
...
Gamepad, GamepadShift: Fix after lower-power by enabling supervisor tick
2020-05-13 11:53:23 -07:00
adef45403b
samd: audio dma: enable/disable supervisor tick as needed
2020-05-13 10:29:36 -05:00
7546d47f77
Merge remote-tracking branch 'adafruit/master' into improve_verification
2020-05-13 08:23:55 -07:00
80129c5a21
Disable countio on trinket haxpress
2020-05-12 18:55:49 -07:00
cde6651721
Merge remote-tracking branch 'adafruit/master' into improve_verification
2020-05-12 18:23:59 -07:00
277e8d528b
Merge branch 'master' into Optical-Encoder-Module
2020-05-12 18:22:57 -07:00
4e8de3c554
Swap sphinx to autoapi and the inline stubs
2020-05-12 17:28:24 -07:00
5a80f5e606
nerf vectorio on a ton of m0 and overcommitted m4 boards due to translation text size
2020-05-12 15:23:00 -07:00
d274074f01
Merge remote-tracking branch 'adafruit/master' into vectorio
2020-05-12 12:29:05 -07:00
bc40034a08
Merge branch 'master' into Optical-Encoder-Module
2020-05-12 12:12:51 -07:00
f7303e6bd0
Merge pull request #2754 from maholli/non-standard-nvm
...
Add non-standard nvm to QSPI for external flash support
2020-05-12 11:56:33 -07:00
62bdfb74e3
removed lib from catwan_usbstick - updated transalations overflowed
2020-05-12 16:40:23 +10:00
5e5461e77e
removed countio from catwan_usbstick build
2020-05-12 16:32:35 +10:00
ee2cb703c8
merged master
2020-05-12 14:41:28 +10:00
55f78bfb70
Merge pull request #2878 from WarriorOfWire/ujson-stream-protocol
...
ujson: work with mp stream protocol for fast & easy read
2020-05-11 15:40:27 -07:00
407938bf3a
Added a check for platforms supporting RTC before calling rtc_reset()
...
Added an #if CIRCUITPY_RTC check for platforms supporting RTC
2020-05-11 12:03:44 -05:00
2ddfab315c
Added call to rtc_reset() in rtc_init()
...
Fix for issue #2872 . The rtc_time_source had not been initialized; causing a time.time() call to fail.
2020-05-11 11:31:18 -05:00
eb3d5fa453
ujson: do not eat trailing whitespace
...
Ujson should only worry about whitespace before JSON. This becomes apparent when you are using MP stream protocol to read directly from input buffers.
When you attempt to read(1) on a UART (and possibly other protocols) you have to wait for either the byte or the timeout.
Fixes:
- Waiting for a timeout after you have completed reading a correct and complete JSON off the input.
- Raising an OSError after reading a correct and complete JSON off the input.
- Eating more data than semantically owned off the input buffer.
- Blocking to start parsing JSON until the entire JSON body has been loaded into a potentially large, contiguous Python object.
Code you would write before:
```
line = board_busio_uart_port.read_line()
json_dict = json.loads(line)
```
or reaching for fixed buffers and swapping them around in Python.
Code that did not work before that does now:
```
json_dict = json.load(board_busio_uart_port)
```
- This removes the need for intermediate copies of data when reading JSON from micropython stream protocol inputs.
- It also increases total application speed by parsing JSON concurrently with receiving on boards that read from UART via DMA.
- It simplifies code that users write while improving their apps.
2020-05-10 20:45:42 -07:00
Diego Elio Pettenò
Scott Shawcroft
Dan Halbert
Scott Shawcroft
Radomir Dopieralski
hathach
Jeff Epler
DavePutz
jason
Mark Olsson
Jeff Epler
warriorofwire
Daniel Pollard