Commit Graph

12107 Commits

Author SHA1 Message Date
Damien George 9fef1c0bde py: Rename remaining object types to be of the form mp_type_xxx.
For consistency with all other object types in the core.

Signed-off-by: Damien George <damien@micropython.org>
2021-03-26 13:48:34 +11:00
Damien George 4fc2866f45 bare-arm: Clean up the code, make it run on an F405, and add a README.
This commit simplifies and cleans up the bare-arm port, and adds just
enough system and library code to make it execute on an STM32F405 MCU.

The mpconfigport.h configuration is simplified to just specify those
configuration values that are different from the defaults.  And the
addition of -fdata-sections and -ffunction-sections means the final
firmware is smaller than it previously was, by about 4200 bytes.

A README is also added.

Signed-off-by: Damien George <damien@micropython.org>
2021-03-19 14:20:26 +11:00
Damien George 42cf77f48b py/vm: For tracing use mp_printf, and print state when thread enabled.
mp_printf should be used to print the prefix because it's also used in
mp_bytecode_print2 (otherwise, depending on the system, different output
streams may be used).

Also print the current thread state when threading is enabled to easily see
which thread executes what opcode.

Signed-off-by: Damien George <damien@micropython.org>
2021-03-17 12:13:53 +11:00
Damien George 6e5aea08a9 stm32/Makefile: Allow QSTR_DEFS,QSTR_GLOBAL_DEPENDENCIES to be extended.
So a board can provide custom qstr definitions if needed.

Signed-off-by: Damien George <damien@micropython.org>
2021-03-17 10:25:16 +11:00
Damien George cb68a5741a tests/run-tests.py: Provide more info if script run via pyboard crashes.
Signed-off-by: Damien George <damien@micropython.org>
2021-03-16 14:49:57 +11:00
Damien George a79d97cb76 tests/extmod/vfs_fat_fileio2.py: Close test file at end of test.
Otherwise it can lead to inconsistent results running subsequent tests.

Signed-off-by: Damien George <damien@micropython.org>
2021-03-16 14:49:57 +11:00
Damien George 2b888aa2f3 extmod/modbluetooth: Free temp arrays in gatts register services.
This helps to reduce memory fragmentation, by freeing the heap data as soon
as it is not needed.  It also helps the compiler keeps a reference to the
beginning of both arrays, which need to be traceable by the GC (otherwise
some compilers may optimise this reference to something else).

Signed-off-by: Damien George <damien@micropython.org>
2021-03-16 13:55:45 +11:00
stijn d53a6d58b0 stm32/Makefile: Fix C++ linker flags when toolchain has spaces in path.
The GNU Make dir command uses spaces as item separator so it does not
work for e.g building the STM32 port on Cygwin with a default Arm
installation in "c:/program files (x86)/GNU Arm Embedded Toolchain".
Fix by using POSIX dirname on a quoted path instead.
2021-03-16 12:54:16 +11:00
stijn 914380cb89 all: Add .git-blame-ignore-revs for fixing up git blame output.
Add most formatting-only commits to this file so that when used with
git blame, these commits are excluded and the output shows only the
interesting bits.
2021-03-15 11:07:29 +01:00
Damien George a9140ab09b rp2: Use core-provided cmake fragments instead of custom ones.
Signed-off-by: Damien George <damien@micropython.org>
2021-03-14 15:53:18 +11:00
Damien George eccd73a403 extmod/extmod.cmake: Add modonewire.c to MICROPY_SOURCE_EXTMOD list.
Signed-off-by: Damien George <damien@micropython.org>
2021-03-14 15:51:28 +11:00
Damien George dcaf702578 rp2/modmachine: Enable machine.Signal class.
Fixes issue #6863.

Signed-off-by: Damien George <damien@micropython.org>
2021-03-14 00:19:04 +11:00
Damien George 8010b15968 rp2: Enabled more core Python features.
This brings the port's configuration closer to the stm32 and esp32 ports.

Signed-off-by: Damien George <damien@micropython.org>
2021-03-14 00:17:22 +11:00
Kevin Köck af45d511f1 rp2: Enable uerrno module.
Fixes #6991.
2021-03-13 23:34:50 +11:00
Damien George e98ff3f08e tests/multi_bluetooth: Skip tests when BLE features are unsupported.
Signed-off-by: Damien George <damien@micropython.org>
2021-03-12 20:08:20 +11:00
Damien George 2a38d71036 tests/run-tests.py: Reformat with Black.
Signed-off-by: Damien George <damien@micropython.org>
2021-03-12 19:56:09 +11:00
Damien George 6129b8e401 tests: Rename run-tests to run-tests.py for consistency.
Signed-off-by: Damien George <damien@micropython.org>
2021-03-12 19:56:09 +11:00
Damien George b24fcd7aec esp32/machine_hw_spi: Use default pins when making SPI if none given.
The default pins can be optionally configured by a board.

Fixes issue #6974.

Signed-off-by: Damien George <damien@micropython.org>
2021-03-12 10:56:25 +11:00
Damien George a62e791978 lib/pico-sdk: Update to latest version 1.1.0.
Signed-off-by: Damien George <damien@micropython.org>
2021-03-12 01:00:00 +11:00
Andrew Scheller b6489425c6 rp2/rp2_flash: Prevent MICROPY_HW_FLASH_STORAGE_BASE being set negative. 2021-03-12 00:57:29 +11:00
robert-hh c675452566 rp2/modmachine: Re-init UART for REPL on frequency change.
When UART is used for REPL and the MCU frequency is changed, the UART
has to be re-initialised.  Besides that the UART may have to be recreated
after a frequency change, but with USB REPL this is not a problem.

Thanks to @HermannSW for spotting and providing the change.
2021-03-12 00:49:30 +11:00
robert-hh 11cf742524 rp2/modmachine: Allow changing CPU clock frequency.
Using the standard machine.freq().

The safe ranges tested were 10 and 12-270MHz, at which USB REPL still
worked.  Requested settings can be checked with the script:
pico-sdk/src/rp2_common/hardware_clocks/scripts/vcocalc.py.  At frequencies
like 300MHz the script still signaled OK, but USB did not work any more.
2021-03-12 00:48:46 +11:00
robert-hh 0461640983 rp2/rp2_pio: Fix sm.get(buf) to not wait after getting last item.
sm.get(buf) was waiting for one item more than the length of the supplied
buffer.  Even if this item was not stored, sm_get would block trying to get
an item from the RX fifo.

As part of the fix, the edge case for a zero length buffer was moved up to
the section where the function arguments are handled.  In case of a zero
length buffer, sm.get() now returns immediately that buffer.
2021-03-12 00:39:26 +11:00
robert-hh a075e0b7d8 rp2/rp2_pio: Allow more than 8 consecutive pins for PIO out/set/sideset.
The bitmasks supplied for initialization of out/set/sideset were only 8 bit
instead of 32.  This resulted in an error, that not more than 8 consecutive
pins would get initialized.

Fixes issue #6933.
2021-03-12 00:26:32 +11:00
robert-hh da85cb014a rp2/machine_uart: Add support for inverted TX and RX lines.
Usage as in the other ports:

    keyword "invert"
    constants: INV_TX and INV_RX

Sample: uart = UART(1, invert=UART.INV_TX | UART.INV_RX)
2021-03-11 18:27:53 +11:00
robert-hh 8ade163fff rp2/machine_uart: Add timeout/timeout_char to read and write. 2021-03-11 18:19:15 +11:00
StereoRocker 8610bababe rp2: Enable VfsFat class for FAT filesystem support.
Allows interfacing with SD cards, for example.
2021-03-11 17:56:21 +11:00
svetelna 23ce25a7c3 mimxrt/boards: Add MIMXRT1050_EVK board, based on MIMXRT1060_EVK. 2021-03-11 16:42:38 +11:00
Mike Causer 8785acac22 esp32/Makefile: Specify port and baud on erase_flash command. 2021-03-11 15:49:10 +11:00
Yonatan Goldschmidt 098ac11bb0 lib/utils/gchelper_generic: Implement AArch64 support. 2021-03-11 12:54:05 +11:00
Yonatan Goldschmidt e196cb762e py/nlrx64: Fix typo in comment. 2021-03-11 12:51:10 +11:00
Yonatan Goldschmidt 2d5cece5ac py/nlr: Implement NLR for AArch64. 2021-03-11 12:51:10 +11:00
Mirko Vogt 7d73b9ff99 lib/mbedtls: Switch to currently latest commit of LTS branch v2.16.
From a version numbering point of view this is a downgrade (2.17.0 ->
2.16.x).  However the latest commit for version 2.17.0 is from March 2019
and no further minor release happened after 2.17.0.  This version is EOL.
2.16.x though is still actively maintained as a long term release, hence
security and stability fixes are still being backported, including
compatibility with upcoming compiler releases.
2021-03-11 11:49:18 +11:00
Damien George c33c749f64 stm32/boardctrl: Add MICROPY_BOARD_STARTUP hook.
Signed-off-by: Damien George <damien@micropython.org>
2021-03-11 09:04:36 +11:00
Reinhard Feger 79c186f5c9 stm32/spi: Fix baudrate calculation for H7 series.
Fixes issue #6342.
2021-03-11 01:06:52 +11:00
Peter Hinch 0facd891e7 stm32/powerctrl: Save and restore EWUP state when configuring standby.
This allows the user to enable wake-up sources using the EWUP bits, on F7
MCUs.

Disabling the wake-up sources while clearing the wake-up flags follows the
reference manual and ST examples.
2021-03-11 00:56:01 +11:00
Braiden Kindt 85ea4ac0e5 stm32/main: Fix passing state.reset_mode to init_flash_fs.
state.reset_mode is updated by `MICROPY_BOARD_BEFORE_SOFT_RESET_LOOP` but
not passed to `init_flash_fs`, and so factory reset is not executed on
boards that do not have a bootloader.  This bug was introduced by
4c3976bbca

Fixes #6903.
2021-03-10 23:50:40 +11:00
Herwin Grobben 35c602d3b8 stm32/make-stmconst.py: Allow "[]" chars when parsing source comments.
For STM32WB MCUs, EXTI offset addresses were not parsed due to the
appearance of "[31:0]" in a comment in the .h file.
2021-03-10 23:44:02 +11:00
Andrew Leech 59a129f22f stm32/storage: Prevent attempts to read/write invalid block addresses.
A corrupt filesystem may lead to a request for a block which is out of
range of the block device limits.  Return an error instead of passing the
request down to the lower layer.
2021-03-09 15:32:50 +11:00
Damien George 680ce45323 stm32/rfcore: Allow BLE settings to be changed by a board.
Two of the defaults have also changed in this commit:

- MICROPY_HW_RFCORE_BLE_LSE_SOURCE changed from 1 to 0, which configures
  the LsSource to be LSE (needed due to errata 2.2.1).

- MICROPY_HW_RFCORE_BLE_VITERBI_MODE changed from 0 to 1, which enables
  Viterbi mode, following all the ST examples.

Signed-off-by: Damien George <damien@micropython.org>
2021-03-02 12:14:54 +11:00
Damien George cdaec0dcaf tools/pydfu.py: Support DFU files with elements of zero size.
Instead of raising a ZeroDivisionError, this tool now just skips any
elements in the DFU file that have zero size.

Signed-off-by: Damien George <damien@micropython.org>
2021-02-23 14:33:31 +11:00
Damien George 53f5bb05a9 rp2,stm32: Enable MICROPY_PY_UBINASCII_CRC32 to get ubinascii.crc32().
These ports already have uzlib enabled so this additional ubinascii.crc32
function only costs about 90 bytes of flash.

Signed-off-by: Damien George <damien@micropython.org>
2021-02-23 10:13:25 +11:00
Damien George 75db0b9079 esp32: Define MICROPY_QSTRDEFS_PORT to include special qstrs.
Fixes issue #6942.

Signed-off-by: Damien George <damien@micropython.org>
2021-02-21 15:56:54 +11:00
Damien George 2adf20c5f2 py/mkrules.cmake: Add MICROPY_QSTRDEFS_PORT to qstr build process.
This allows a port to specify a custom qstrdefsport.h file, the same as the
QSTR_DEFS variable in a Makefile.

Signed-off-by: Damien George <damien@micropython.org>
2021-02-21 15:56:54 +11:00
Damien George d867d20d9a py/mkrules.cmake: Rename QSTR_DEFS variables to QSTRDEFS.
And also MICROPY_PY_QSTRDEFS to MICROPY_QSTRDEFS_PY.  These variables are
all related.

Signed-off-by: Damien George <damien@micropython.org>
2021-02-21 15:56:54 +11:00
iTitou d334d781e1 tools/verifygitlog.py: Show required format regexp in error message.
Signed-off-by: iTitou <moiandme@gmail.com>
2021-02-21 15:55:44 +11:00
Damien George 03a64f2077 stm32/boards/NUCLEO_WB55: Enable LPUART1 on PA2/PA3.
Signed-off-by: Damien George <damien@micropython.org>
2021-02-21 15:49:33 +11:00
Chris Mason 9d674cf7ab stm32/uart: Add support for LPUART1 on L0, L4, H7 and WB MCUs.
Add LPUART1 as a standard UART.  No low power features are supported, yet.
LPUART1 is enabled as the next available UART after the standard U(S)ARTs:

    STM32WB:      LPUART1 = UART(2)
    STM32L0:      LPUART1 = UART(6)
    STM32L4:      LPUART1 = UART(6)
    STM32H7:      LPUART1 = UART(9)

On all ports: LPUART1 = machine.UART('LP1')

LPUART1 is enabled by defining MICROPY_HW_LPUART1_TX and
MICROPY_HW_LPUART1_RX in mpconfigboard.h.

Signed-off-by: Chris Mason <c.mason@inchipdesign.com.au>
2021-02-21 15:49:32 +11:00
Jim Mussared 1342debb9b tests/multi_bluetooth: Add basic performance tests.
1. Exchange GATT notifications.
2. Transmit a stream of data over L2CAP.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-02-19 17:53:43 +11:00
Jim Mussared a76604afba extmod/modbluetooth: Separate enabling of "client" from "central".
Previously, the MICROPY_PY_BLUETOOTH_ENABLE_CENTRAL_MODE macro
controlled enabling both the central mode and the GATT client
functionality (because usually the two go together).

This commits adds a new MICROPY_PY_BLUETOOTH_ENABLE_GATT_CLIENT
macro that separately enables the GATT client functionality.
This defaults to MICROPY_PY_BLUETOOTH_ENABLE_CENTRAL_MODE.

This also fixes a bug in the NimBLE bindings where a notification
or indication would not be received by a peripheral (acting as client)
as gap_event_cb wasn't handling it. Now both central_gap_event_cb
and peripheral_gap_event_cb share the same common handler for these
events.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-02-19 17:53:43 +11:00