Doing a squash merge to avoid having the `slc_cli_linux` .zip files in the history. They were added in one commit and removed and replaced with a submodule in another.
* Initial commit for xg24
* Fix SLC issue
* Fix SLC extract fail
* Change board's name
* Correct spelling of code
Build immediately after slc generate
* Remove VID and PID
* Change creator and creation id
* Apply new creator_id and creation_id
* Update makefile, error message, mcu_processor function
* Update mpconfigboard.mk
* Update Board extensions, PORT_DEPS
* Update makefile
* Add exclude_patterns
* Show java, jinja2 version
* Show path for debugging CI
* Add requirements-dev for slc
* Add PATH slc_cli
* Update background function
* Add jinja2 PATH
* Show PATH
* Update jinja2 path
* Update jinja2 path
* Update jinja2 path
* Update jinja2 path
* Change slc folder
* Change markupsafe folder
* Add symbolic link for slc
* Update makefile
* Update makefile
* Update MX25R3235F.toml from submodule nvm.toml
* alphabetize the list
* Remove slc_cli_linux folder
* Update slc_cli submodule
---------
Co-authored-by: Chat Nguyen <cvnguyen@silabs.com>
Co-authored-by: silabs-ChatNguyen <chat.nguyen@silabs.com>
Co-authored-by: silabs-ChatNguyen <126220343+silabs-ChatNguyen@users.noreply.github.com>
The mpremote REPL can now be closed with either ctrl+] or ctrl+x, which
gives users a choice, useful if the ']' key is difficult to access.
Fixes issue #11197.
Signed-off-by: Jonas Scharpf <jonas@brainelectronics.de>
This adds a new MODE_PYPROJECT, which gives basic support to allow
packaging a small subset of micropython-lib packages to PyPI.
This change allows a package in micropython-lib to:
- Add a "pypi" name to its metadata indicating that it's based on a PyPI
package.
- Add "stdlib" to its metadata indicating that it's a micropython version
of a stdlib package.
- Add a "pypi_publish" name to its metadata to indicate that it can be
published to PyPI (this can be different to the package name, e.g. "foo"
might want to be published as "micropython-foo").
When a package requires() another one, if it's in MODE_PYPROJECT then if
the package is from pypi then it will record that as a pypi dependency
instead (or no dependency at all if it's from stdlib).
Also allows require() to explicitly specify the pypi name.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
This is a follow up to d263438a6e, which
solved one problem (reset on disconnect) but introduced a second one (hang
in bootloader).
To solve both probles, False/False is needed for DTR/RTS for ESPxx, but
that would then block stm32 and others. Any unconditional combination of
DTR/RTS ends up blocking normal operation on some type of board or another.
A simple overview (for windows only):
DTR CTS ESP8266/ESP32 STM32/SAMD51/RP2040
unspecified unspecified Reset on disconnect OK
True False Hang in bootloader OK
False False OK No Repl
True True Reset on disconnect No Repl
False True Reset on disconnect No Repl
serial.manufacturer: wch.cn/Silicon Labs Microsoft
serial.description: USB-SERIAL CH340 / USB Serial Device
CP210x USB to UART
Bridge
The updated logic will only set the DTR/RTS signals for boards that do not
use standard Microsoft drivers (based on the manufacturer). It would also
be possible to check against a list of known driver manufactures (like
wch.cn or Silicon Labs) but this would require a list of known drivers for
all ports.
Signed-off-by: Jos Verlinde <jos_verlinde@hotmail.com>
* Enable dcache for OCRAM where the VM heap lives.
* Add CIRCUITPY_SWO_TRACE for pushing program counters out over the
SWO pin via the ITM module in the CPU. Exempt some functions from
instrumentation to reduce traffic and allow inlining.
* Place more functions in ITCM to handle errors using code in RAM-only
and speed up CP.
* Use SET and CLEAR registers for digitalio. The SDK does read, mask
and write.
* Switch to 2MiB reserved for CircuitPython code. Up from 1MiB.
* Run USB interrupts during flash erase and write.
* Allow storage writes from CP if the USB drive is disabled.
* Get perf bench tests running on CircuitPython and increase timeouts
so it works when instrumentation is active.
Currently, certain mpremote filesystem operations can fail on Windows due
to a mixing of '/' and '\' for path separators. Eg if filesystem_command()
is called with a destination that ends in / then dest.endswith(os.path.sep)
will return False, which gives the wrong behaviour (it does end in a path
separator).
For similar reasons to 7e9a15966a, it's best
to use '/' everywhere in pyboard.py and mpremote, because the target device
understands only '/'. mpremote already does this, so the remaining place
to fix it is in pyboard.y, to convert all incoming paths to use '/' instead
of '\'.
This effectively reverts 57fd66b80f which
tried to fix the problem in a different way.
See also related 1f84440538.
Signed-off-by: Damien George <damien@micropython.org>
This allows the entire configuration to be defined in a single file,
including the logic for including pyboard.py and automatically versioning
based on the git tag.
Building the package works both via `python -m build` as well as
`hatch build`. `python -m build ` has the advantage of automatically
fetching all dependencies, you don't need to manually install any hatch
packages.
In order to make the versioning work, and also keep things simpler for end
users, mpremote releases will now be the same as MicroPython releases and
use the same tag. The version strings for mpremote will look like:
- X.Y.Z -- clean build at the tag
- X.Y.Z.postN+gHASH -- clean build, N revisions from the most recent tag
- X.Y.Z.postN+gHASH.dYYYYMMDD -- dirty build, N revisions from out
This commit extends on the idea from #8404.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
Now that the code-size-check CI action gives a nice report (as a comment)
on the code size difference, it's possible to have a few more ports
reported there. In this commit, unix, stm32 and rp2 are added. Unix
represents non-MCU builds, and stm32 and rp2 represent ARM-based builds,
for ports that have lots of features enabled.
Signed-off-by: Damien George <damien@micropython.org>
This 2-in-1 PR started with the goal of support the Bangle.js 2
smartwatch with *no USB*.
* Adds "secure" DFU build support with a committed private key.
* Adds 3-bit color support with one dummy bit for the JDI memory display
* Allows nrf boards to have a board_background_task() run in RUN_BACKGROUND_TASK.
This is needed because the Bangle.js 2 uses the watchdog to reset.
* Renamed port_background_task() to port_background_tick() to indicate it
runs on tick, not RUN_BACKGROUND_TASK.
* Marks serial connected when the display terminal is inited. This means
that safe mode messages show up on the display.
ACep, 7-color epaper displays also pack 3 bits in 4. So, I added that
support as well.
* Adds 3-bit ACeP color support for 7-color e-paper displays. (Not
watch related but similar due to color depth.)
* Allows a refresh sequence instead of a single int command. The 7" ACeP
display requires a data byte for refresh.
* Adds optional delay after resetting the display. The ACeP displays
need this. (Probably to load LUTs from flash.)
* Adds a cleaning phase for ACeP displays before the real refresh.
For both:
* Add dither support to Palette.
* Palette no longer converts colors when set. Instead, it caches
converted colors at each index.
* ColorConverter now caches the last converted color. It should make
conversions faster for repeated colors (not dithering.)
These are for working with the filesystem when using pyboard.py as a
library, rather than at the command line.
- fs_listdir returns a list of tuples, in the same format as os.ilistdir().
- fs_readfile returns the contents of a file as a bytes object.
- fs_writefile allows writing a bytes object to a file.
- fs_stat returns an os.statresult.
All raise FileNotFoundError (or OSError(ENOENT) on Python 2) if the file is
not found (or PyboardError on other errors).
Updated fs_cp and fs_get to use fs_stat to compute file size.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
This is useful when using pyboard.py as a library rather than at the
command line.
pyb.eval("1+1") --> b"2"
pyb.eval("{'a': '\x00'}") --> b"{'a': '\\x00'}"
Now you can also do
pyb.eval("1+1", parse=True) --> 2
pyb.eval("{'a': '\x00'}", parse=True) --> {'a': '\x00'}
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
This prevents a bogus line such as `from types import ` from being
generated.
surprisingly this was not detected as a problem until a change
in isort! Formerly it would remove the bad line, but now it (correctly!)
errors
On MacOS and Windows there are a few default serial devices that are
returned by `serial.tools.list_ports.comports()`. For example on MacOS:
```
{'description': 'n/a',
'device': '/dev/cu.Bluetooth-Incoming-Port',
'hwid': 'n/a',
'interface': None,
'location': None,
'manufacturer': None,
'name': 'cu.Bluetooth-Incoming-Port',
'pid': None,
'product': None,
'serial_number': None,
'vid': None}
{'description': 'n/a',
'device': '/dev/cu.wlan-debug',
'hwid': 'n/a',
'interface': None,
'location': None,
'manufacturer': None,
'name': 'cu.wlan-debug',
'pid': None,
'product': None,
'serial_number': None,
'vid': None}
```
Users of mpremote most likely do not want to connect to these ports. It
would be desirable if mpremote did not select this ports when using the
auto connect behavior. These serial ports do not have USB VID or PID
values and serial ports for Micropython boards with FTDI/serial-to-USB
adapter or native USB CDC/ACM support do.
Check for the presence of a USB VID / PID int value when selecting a
serial port to auto connect to. All serial ports will still be listed by
the `list` command and can still be selected by name when connecting.
Signed-off-by: Michael Mogenson <michael.mogenson@gmail.com>
The zephyr CI takes the most time out of all CI jobs, so remove the
standard qemu_x86 build to speed it up. The remaining builds should still
cover enough cases to catch errors.
Signed-off-by: Damien George <damien@micropython.org>
This used to be used to generate .rst docs from inline comments in the C
code (specifically for APIs) but is now unused.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
App the mp_ prefix to usbd_ symbols and files which are defined here and
not in TinyUSB.
rp2 only for now. This includes some groundwork for dynamic USB devices
(defined in Python).
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
So that filesystems mounted with "mpremote mount" can have their files
iterated over, making them consistent with other files.
Signed-off-by: Damien George <damien@micropython.org>
The except handler for OSError didn't include the line that actually calls
os.listdir, so an invalid path wasn't handled correctly.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
In order for v1.19.1 to load a .mpy, the formerly-feature-flags which are
now used for the sub-version must be zero.
The sub-version is only used to indicate a native version change, so it
should be zero when emitting bytecode-only .mpy files.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
This applies to nimble, btstack, axtls, mbedtls, lwip.
Rather than having the ports individually manage GIT_SUBMODULES for these
components, make extmod.mk append them when the relevant feature is
enabled.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
silabs-BelaV
Jonas Scharpf
Bill Sideris
Jim Mussared
Jos Verlinde
Jeff Epler
Dan Halbert
hathach
Damien George
Dan Halbert
MicroDev
Scott Shawcroft
Christian Clauss
Neradoc
Martin Milata
Jos Verlinde
Bernhard Bablok
robert-hh
stijn
Michael Mogenson
Tobias Thyrrestrup
Dominic Davis-Foster
iabdalkader
Andrew Scheller
Angus Gratton