foamyguy
948040f1f0
disable onewire instead of displayio on boards without room
2022-04-10 10:00:37 -05:00
foamyguy
7ad5fa511e
disable displayio for some boards
2022-04-09 16:24:06 -05:00
Jeff Epler
766bf8f671
disable floppyio on kicksat-sprite
2022-04-07 10:57:37 -05:00
Mark
8ed7b114cd
Merge branch 'main' into uzlib-module
2022-04-03 11:48:37 -05:00
gamblor21
9d67e62f4d
Removed from small board
2022-04-03 11:47:19 -05:00
Jeff Epler
d91ca7369c
Merge remote-tracking branch 'origin/main' into revamp-duplicate-usb-check
2022-03-24 09:44:41 -05:00
Jeff Epler
a07ac72cc5
Improve the USB vid:pid duplicate checker
...
To me, it made more sense to track which boards go together in a cluster;
when reviewing a request to actually use a duplicate vid/pid, you want
to know what board(s) it is aliasing.
I also revamped the detection of non-USB boards so that a board .mk file
that couldn't be parsed by the code here would raise a problem instead
of just being skipped for the purposes of checking.
There were some lines with comments on the end, and some variation in
capitalization of the IDs. These are all normalized and a (sometimes
unfriendly!) error printed when it's incorrect.
Before this, here were some ways to trick the duplicate vid/pid checker:
```
USB_PID = 0XABCD
USB_PID = 0xAbCd
USB_PID = 0xABCD # harmless comment?
```
None of these things were ever done on purpose.
2022-03-24 09:42:11 -05:00
Scott Shawcroft
4363361c87
Board definition clean up
...
Removes:
* AUTORESET_DELAY_MS which never did anything but was introduced
somehow.
* CIRCUITPY_BOOT_BUTTON in all but one ESP board because they all have
them. There is a default based on the strapping pins.
* BOARD_USER_SAFE_MODE_ACTION because it was all the same for boards
with boot buttons. Now the safe mode code manages the message.
2022-03-21 17:58:43 -07:00
Scott Shawcroft
c098474854
Disable aesio and traceback on matrixportal to save space
2022-03-16 10:41:17 -07:00
Scott Shawcroft
dcc3ec171e
Merge remote-tracking branch 'adafruit/7.2.x' into merge_7.2.2
2022-03-15 13:56:11 -07:00
Scott Shawcroft
f602296e59
Re-enable BLE on MatrixPortal. Remove PortalBase
...
We have a guide that uses it. It was removed in #6043 without
realizing that.
Fixes #6152
2022-03-14 17:04:46 -07:00
Dan Halbert
19e7647f3d
turn off MIDI on sensebox_mcu for sapce
2022-03-10 18:20:04 -05:00
Dan Halbert
a7260a8b61
squeeze arduino_zero further
2022-03-10 15:56:51 -05:00
Dan Halbert
c5947fd6de
squeeze arduino_zero and sensebox_mcu
2022-03-10 12:46:08 -05:00
Dan Halbert
6ddab0f3c8
shrink matrixportal_m4
2022-03-10 11:20:44 -05:00
Dan Halbert
05a4d24a0f
Merge pull request #6117 from dhalbert/__future__
...
implement `from __future__ import annotations`
2022-03-08 09:33:36 -05:00
Dan Halbert
eff6057fa3
shrink matrixportal_m4
2022-03-07 21:37:28 -05:00
Michael Himing
78d7bce02a
seeeduino_xiao_kb: Copy pins from seeeduino_xiao
2022-03-08 08:58:32 +11:00
Scott Shawcroft
ff865b60da
Merge pull request #5298 from pewpew-game/logo-remove
...
Add a flag for removing the Blinka logo from the REPL
2022-03-07 12:53:56 -08:00
Dan Halbert
96aec37ead
fix whitespace
2022-03-07 09:11:29 -05:00
Dan Halbert
e91c2e13fb
Seediuno XIAO SAMD21: inverted pins
2022-03-07 09:03:32 -05:00
Rick Sorensen
be3129a917
Update ports/atmel-samd/boards/seeeduino_xiao/pins.c
...
Co-authored-by: Dan Halbert <halbert@halwitz.org>
2022-03-06 22:59:54 -06:00
Rick Sorensen
6fd0643b1e
Remove trailing white space
2022-03-06 21:15:37 -06:00
Rick Sorensen
d7ef8f18df
pins.c: added comment of reverse wiring for XIAO LEDs
2022-03-06 20:07:42 -06:00
Rick Sorensen
36a27806d8
pins.c: Modify and correct LED pin mappings and names for Xiao
...
Added YELLOW_LED=LED=D13,
BLUE1_LED=RX_LED,
BLUE2_LED=TX_LED
2022-03-06 19:20:37 -06:00
Radomir Dopieralski
93ea1bd9bd
Add a flag for removing the Blinka logo from the REPL
...
There may be several reasons why we might want to remove the logo form
the REPL: a fork of CircuitPython that doesn't have the right to use the
logo, an especially small display that needs all the room it has to be
useful, displays that are especially vulnerable to burn-in, maybe even
the smaller chips where we want to save as much flash memory as
possible.
2022-03-05 15:38:59 +01:00
James Bowman
353ea6f70e
Add EVE support to Feather M4 CAN
2022-02-27 18:34:30 -08:00
Dan Halbert
01d880829a
Merge pull request #6041 from t-ikegami/enable_uasyncio
...
Enable _uasyncio module
2022-02-25 13:42:29 -05:00
Dan Halbert
61425864f0
turn off onewireio in matriportal_m4
2022-02-25 12:22:45 -05:00
Scott Shawcroft
9e16487203
Merge pull request #6048 from t-ikegami/atmel-samd-fix-alarm
...
Fix atmel-samd alarm module
2022-02-23 15:29:54 -08:00
Tsutomu IKEGAMI
6499d18bb8
Remove board_deep_sleep_hook, which should be done in board_deinit.
2022-02-21 19:21:42 +09:00
gamblor21
edee8e3409
disable on some boards
2022-02-21 00:47:05 -06:00
Tsutomu IKEGAMI
bd9dd3dc63
Fix atmel-samd alarm module.
2022-02-17 23:00:26 +09:00
Melissa LeBlanc-Williams
8f741e7767
Removed more frozen libs and disabled unlikely used modules
2022-02-16 14:47:12 -08:00
Melissa LeBlanc-Williams
0aadb4e256
Remove DisplayText Frozen Lib from MatrixPortal saving about 60K
2022-02-16 14:04:00 -08:00
Melissa LeBlanc-Williams
726bf02ea8
Add PortalBase and Fake Requests and update Frozen Libs on Portal boards
2022-02-16 10:12:54 -08:00
George White
f3b67cc104
MicroMod SAMD51: Correct default MISO
2022-02-12 17:49:50 +00:00
Chris Osterwood
7247990c3e
Update pins.c
...
Fix typo
2022-02-09 14:26:20 -05:00
Chris Osterwood
8e3f719056
Update mpconfigboard.mk
...
Add build flags to turn off subsystems which are not relevant to the USB Hub
2022-02-09 13:54:08 -05:00
Chris Osterwood
4c371db5b2
Update pins.c
...
Adds a pin which is used by recent firmware for PCB hardware identification.
2022-02-09 13:53:19 -05:00
Dan Halbert
72317c309d
turn off CIRCUITPY_ONEWIREIO by default for skinny SAMD21 builds
2022-02-09 11:40:07 -05:00
Scott Gauche
309f4fb2b9
add half_duplex false param to spi construct function call in some board files
2022-02-08 22:59:26 -05:00
Dan Halbert
e355ea2b91
shrink seeeduino_xiao build
2022-02-03 13:27:36 -05:00
Dan Halbert
0129735dbe
Merge pull request #5969 from Life-Imaging-Services/crc32
...
crc32() code moved into binascii
2022-02-02 18:07:02 -05:00
Dan Halbert
0d43e3e734
squeeze datum_imu build
2022-02-02 13:44:40 -05:00
Dan Halbert
a04cd6444b
Merge pull request #5966 from Neradoc/add-alias-stemma-i2c
...
Add alias board.STEMMA_I2C for all boards with qwiic/stemma/QT
2022-02-02 11:08:13 -05:00
Neradoc
b2c8fd3938
add board.STEMMA_I2C alias to some boards
2022-02-02 01:18:46 +01:00
Dan Halbert
d0453f460d
shrink sensebox; fix doc error
2022-02-01 10:12:26 -05:00
Dan Halbert
20a17bec25
shrink arduino_mkrzero and sparkfun_samd21_dev
2022-01-31 09:16:03 -05:00
Dan Kulinski
19f9163892
Bringing branch up to date with current main
2022-01-25 11:02:00 -07:00
Dan Kulinski
60801066b2
Fix magtag, openbook for EPaperDisplay constructor
2022-01-24 12:34:01 -07:00
Scott Shawcroft
9a353a4f56
Merge pull request #5422 from Neradoc/nera-secondary-I2C
...
Allow multiple board buses
2022-01-21 11:08:14 -08:00
microDev
67293c265c
Merge branch 'main' into board-bus
2022-01-21 10:08:39 +05:30
Dan Halbert
fed5227de9
shrink stringcar_m0_express
2022-01-20 20:34:04 -05:00
Brian Dean
1fb4f02de2
ports/atmel-samd/boards/bdmicro_vina_d51/pins.c: Add LED_AUX pin.
2022-01-06 16:32:17 -05:00
Jeff Epler
34e8bfd09e
explicitly use mpz long ints on this board
2021-12-27 16:39:04 -06:00
Dan Halbert
325c2161e9
shrink CPX crickit build
2021-12-23 12:24:16 -05:00
microDev
b6858e4ca7
allow multiple board buses
...
Co-authored-by: Neradoc <neraOnGit@ri1.fr>
2021-12-11 23:07:21 +05:30
Dan Halbert
e8ea9c75a1
check for missing pins; deinit txrx leds
2021-11-30 19:16:21 -05:00
Dan Halbert
57c33059f3
board_deinit() everywhere
2021-11-30 11:00:10 -05:00
Scott Shawcroft
e6a68cc4a7
Shrink 3 SAMD builds by disabling onewireio
2021-11-24 14:27:49 -08:00
Jeff Epler
dfef5014ed
enable rainbowio with newly free space
2021-11-12 17:31:12 -06:00
microDev
b5dd8891e2
turn off onewireio on feather_m0_adalogger
2021-11-12 20:02:22 +05:30
Dan Halbert
adac5ee596
Merge pull request #5563 from jepler/enable-error-missing-prototypes
...
Additional missing-prototypes fixes
2021-11-11 11:57:43 -05:00
Jeff Epler
cd6599ce65
A few more missing-prototypes fixes
2021-11-11 08:42:30 -06:00
Dan Halbert
f058c5ec8c
fix kicksat-sprite
2021-11-10 23:05:06 -05:00
Dan Halbert
e7d9dc323b
shrink kicksat-sprite, simmel, pyb_nano_v2
2021-11-10 21:12:41 -05:00
microDev
53a68f7ce6
turn off onewireio on arduino_nano_33_iot
2021-11-10 20:25:46 +05:30
Jeff Epler
8e8c44afea
Merge remote-tracking branch 'origin/main' into alphablend
2021-11-05 11:24:51 -05:00
Jeff Epler
d532ad388b
disable framebufferio so bitmaptools can fit
2021-11-05 11:24:03 -05:00
Jeff Epler
334a9c85ce
Merge remote-tracking branch 'origin/main' into gifio
2021-11-04 20:22:00 -05:00
Jeff Epler
18eaee9beb
reenable RAINBOWIO on these boards
2021-11-01 12:52:13 -05:00
Jeff Epler
3e020a73a8
Disable gifio if no displayio & for small boards
...
Technically all gifio needs from displayio is the definition of
colorspaces, but let's just disable it for now.
2021-10-26 08:54:18 -05:00
Dan Halbert
e868f1b1fe
Merge pull request #5510 from jepler/cmd25-v2
...
sdcardio: Use CMD25 across multiple writeblocks() calls
2021-10-26 08:46:28 -04:00
Jeff Epler
d999a88e57
Drop Adafruit_CircuitPython_SD where sdcardio is enabled
2021-10-25 16:07:27 -05:00
Max Holliday
7cbcc2f9ec
updating pycubed board defs & including
2021-10-11 15:34:58 -07:00
Max Holliday
238b07c3af
Fixed merge conflict for circuitpython.pot
2021-10-09 14:28:20 -07:00
Dan Halbert
4c45364dca
Merge pull request #5442 from jpconstantineau/board-xiao-kb
...
Add new board variant: Seeed XIAO targeted for Keyboards/HID Devices
2021-10-08 18:19:58 -04:00
Pierre Constantineau
37d3adfe4f
updated PID from Seeed provided VID/PID
2021-10-08 07:15:18 -06:00
Max Holliday
d536be7228
working samd deep sleep timealarm and pinalarm (sketchy)
2021-09-29 11:44:15 -06:00
Pierre Constantineau
c5672066d0
initial xiao kb config
2021-09-20 15:52:28 -06:00
Max Holliday
4eda8b04c4
removing redudant pycubed v04 board defs
2021-09-16 12:12:15 -06:00
Max Holliday
1ccaeeb619
adding back heritage pycubed board defs
2021-09-15 14:36:27 -06:00
Max Holliday
4f10a91f85
moving boot counter to main() and re-adding old pin names for SD_CS
2021-09-15 14:33:54 -06:00
Max Holliday
5b69aa0a58
Merge branch 'adafruit:main' into pycubed_v05c
2021-09-15 14:23:56 -06:00
Dan Halbert
0ab4df6f2f
shrink some SAMD21 builds, and nrf simmel
2021-09-14 17:10:49 -04:00
Max Holliday
dbd557dc89
splitting pycubed board def into pycubed_v04 and pycubed_v05
2021-09-11 20:29:40 -06:00
Max Holliday
d9ae2c00b4
Merge branch 'adafruit:main' into pycubed_v05c
2021-09-11 20:09:59 -06:00
Dan Halbert
aa1d089cdb
proxlight: Freeze adafruit_adps9960 instead of adafruit_hid; enable usb_midi
2021-09-10 14:50:09 -04:00
Max Holliday
fa83c1c2f9
adding boot counter to main.c
...
The boot counter is a uint8_t single-byte counter stored in the first NVM byte position (`micrcontroller.nvm[0]`). The counter increments by 1 each time the board boots, regardless if it's a hard or soft reset.
Enable the boot counter by adding `#define CIRCUITPY_BOOT_COUNTER 1` to your board's mpconfigboard.h file. Note that an error will be thrown during the build if `CIRCUITPY_INTERNAL_NVM_SIZE` is not also set within mpconfigboard.h.
2021-09-08 19:56:23 -06:00
Max Holliday
674a3027fc
updating pycubed firmware for mainboardv05 :)
2021-09-04 18:39:24 -06:00
Neradoc
8625e53817
change board dicts to include a common macro with __name__
2021-09-03 21:03:55 +02:00
microDev
d526925d49
make aesio module full build dependent
2021-09-02 19:02:01 +05:30
Scott Shawcroft
0d280fa83c
Two fixes, one for ble workflow, one for linking
...
BLE workflow had an incorrect list size for characteristics
Linking didn't advance . link it should have without extra ().
2021-09-01 12:43:43 -07:00
Scott Shawcroft
cd5acae4f4
Sort .text section to reduce fill
2021-08-31 18:04:01 -07:00
Jeff Epler
8f024316ad
explicitly disable paralleldisplay on a few boards
2021-08-29 07:33:54 -05:00
Jeff Epler
7520feed1c
Move ParallelBus to its own module
2021-08-29 07:33:54 -05:00
Neradoc
4d05bb26bf
change board.ID to board.board_id
2021-08-26 23:11:55 +02:00
Neradoc
b14b294516
add board.ID
2021-08-26 23:11:55 +02:00
Scott Shawcroft
6d49a9f0c5
Merge pull request #5205 from jepler/deprecate-vertical-scroll
...
Deprecate Display's constructor arg set_vertical_scroll
2021-08-23 12:52:12 -07:00
Scott Shawcroft
935888927e
Merge pull request #5196 from dhalbert/samd-audio-fixes
...
improve SAMD audio DMA
2021-08-23 10:27:59 -07:00
Jeff Epler
379461df7d
Deprecate Display's constructor arg set_vertical_scroll
2021-08-23 09:17:59 -05:00
Dan Halbert
046372d840
put back some dynossat_edu_obc pins
2021-08-21 16:14:09 -04:00
Scott Shawcroft
5c6e80a2bb
Shrink builds by defining advanced micropython API
...
Also, ignore more pins on SAMD boards and disable EXFAT on others.
2021-08-19 16:49:33 -07:00
Dan Halbert
5b0009cbc4
Merge pull request #5151 from dhalbert/usb_hid-changes
...
Support multiple reports per device in usb_hid
2021-08-17 17:14:28 -04:00
Ryan A. Pavlik
a77e269121
cp_sapling_m0_revb: board.UART not board.uart
...
This is the only board that didn't match the all-uppercase convention for these UART (and more generally, these bus) entries.
2021-08-16 17:07:17 -05:00
Dan Halbert
f37e1d7bf5
squeeze a couple of boards
2021-08-14 17:36:05 -04:00
Scott Shawcroft
fb6b438580
Make getpass and traceback full build only
...
This leaves much more space on SAMD21 builds that aren't "full builds".
These are new APIs that we don't need to add to old boards.
Also, tweak two Arduino boards to save space on them.
2021-08-11 14:47:35 -07:00
Scott Shawcroft
0c1d6cef75
Merge remote-tracking branch 'adafruit/main' into fix_cp_irremote
2021-08-11 13:43:59 -07:00
Scott Shawcroft
083960ce90
Fix SAMD51 builds and Prox Trinkey
...
Adds CIRCUITPY_BUSIO_UART to disable UART by raising ValueError
that no pins work.
2021-08-11 11:53:26 -07:00
Chris Wilson
e741330ca8
Consistent pin naming for SparkFun MicroMod processor boards.
2021-08-09 23:10:52 -07:00
microDev
93c9d59960
Merge branch 'main' into getpass
2021-08-10 01:00:10 +05:30
microDev
51f8603783
add getpass module
2021-08-09 17:50:28 +05:30
Nathan Young
579194a543
Colocated board.LED and D13 together (GCM4)
2021-08-09 05:35:38 +02:00
Nathan Young
a15ac65fa0
Add board.LED for Grand Central M4 Express
...
Fixes #5111
2021-08-08 21:43:12 +02:00
Scott Shawcroft
be2342f32f
Merge pull request #5072 from microDev1/traceback
...
Add traceback module
2021-08-06 12:10:17 -07:00
Brian Dean
821f3d5532
board bdmicro_vina_d51: Add support for MX25L12833F flash chip. Add QSPI activity indicator LED. Add D15-D19 as aliases for the I2S peripheral pins.
2021-08-05 09:14:51 -04:00
Scott Shawcroft
d5cdceb9b9
Use all 4 status pixels on neotrinkey too
2021-07-28 14:25:21 -07:00
microDev
f371c0a609
add traceback module
2021-07-28 18:06:23 +05:30
Kattni
fc59a7ac02
Merge pull request #5068 from dhalbert/remove-gamepad
...
remove gamepad; deprecate gamepadshift
2021-07-27 11:35:06 -04:00
Dan Halbert
901a6c27c0
remove gamepad; deprecate gamepadshift
2021-07-26 22:15:09 -04:00
Dan Halbert
11ca505fdb
add board.LED wherever possible
2021-07-26 19:57:12 -04:00
lady ada
f3a286a7ea
can we add busdevice and have room?
2021-07-25 14:45:35 -04:00
Scott Shawcroft
70cbb4eddb
Support multiple status neopixels
...
Use the 10 neopixels on the playgrounds for status.
Fixes #5039
2021-07-23 15:17:09 -07:00
Scott Shawcroft
e042d54702
Fix three boards and xtensa cache key
2021-07-16 11:15:05 -07:00
Scott Shawcroft
ca2cb9af2b
Remove MICROPY_PORT_* macros used for never reset
...
Now we use never_reset which is generally more correct and easier
to get right.
Fixes #5001 and fixes #4997
2021-07-15 16:20:04 -07:00
Kattni Rembor
825a706135
Turn off MIDI on one build, fix name.
2021-07-08 17:31:10 -04:00
Dan Halbert
d886e8041d
Turn off pwmio on meow meow for space reasons
2021-07-01 22:14:37 -04:00
Radomir Dopieralski
1a076d34c9
PewPew M4: use keypad instead of gamepad
...
Since the new keypad module is taking over gamepad functionality,
I'm switching to it. If this works well, I will make the change
for the remaining boards.
2021-06-29 10:36:52 +02:00
Scott Shawcroft
b81573d439
Merge pull request #4891 from dhalbert/keypad-scanning-events
...
keypad: support for vector and matrix key scanning
2021-06-24 10:25:21 -07:00
Tsutomu IKEGAMI
15fc4c21b6
Fix typo in pin names I2S_SDIN/SDOUT of Wio Terminal
2021-06-24 21:24:23 +09:00
Dan Halbert
db297add67
fix other too-big builds
2021-06-18 13:20:31 -04:00
Dan Halbert
04b69cde9b
turn off gamepad on most builds;turn off keypad where appropriate
2021-06-17 13:46:45 -04:00
Dan Halbert
4655a71793
Turn off keypad on some builds to avoid overflow
2021-06-15 14:11:04 -04:00
Tsutomu IKEGAMI
fd222dd066
Fix typo in Wio Terminal pin board.I2S_BLCK to I2S_BCLK (bit clock)
2021-06-15 20:51:55 +09:00
Kattni Rembor
12d0e65a2a
Space out pin groups.
2021-06-14 15:37:02 -04:00
Kattni Rembor
f96642de25
Add A0 as alias to pot pin.
2021-06-14 15:32:12 -04:00
George White
9cde8a2265
MicroMod SAMD51 - correct I2C_INT pin
2021-06-03 06:05:13 -04:00
George White
26c6bd2346
MicroMod SAMD51 - correct SCL2
2021-06-03 05:39:09 -04:00
George White
6e36f30d9f
MicroMod SAMDt1 - correct board nane
2021-06-03 05:36:05 -04:00
George White
2b068414e1
Fix missing comma
...
Doh
2021-06-02 23:13:08 -04:00
George White
0437199706
Fix some pin mappings
...
Conflicts:
ports/atmel-samd/boards/sparkfun_samd51_micromod/pins.c
2021-06-02 22:22:04 -04:00
George White
4c493c86c8
Add Sparkfun MicroMod SAMD51
2021-06-02 22:05:58 -04:00
George White
db1830d62b
Add Sparkfun MicroMod SAMD51
2021-06-02 21:53:23 -04:00
Dan Halbert
3930440bc5
Fix usb_cdc.enable(console=False, data=True)
2021-06-02 11:29:56 -04:00
Dan Halbert
5eb4cc6489
Remove non-product Adafruit boards
2021-05-26 16:01:17 -04:00
Scott Shawcroft
5643355e90
Merge remote-tracking branch 'adafruit/main' into simplify_status_led
2021-05-20 08:35:15 -07:00
Scott Shawcroft
642fbcf87a
Handle status led power
...
This no longer turns on status LED power before running user code.
Therefore, use of the status LED on some boards will also have to
enable the power.
2021-05-19 10:57:14 -07:00
Dan Halbert
1e2a945782
Make busio.SPI be NotImplementedError on proxlight to save space
2021-05-14 21:52:54 -04:00
Scott Shawcroft
5c33c9d597
Fix SAMD
...
RTC needed to wait for sync. NeoPixel on SAMD doesn't need disabled
caches. It just needed timing adjustment for 120mhz clock speed.
2021-05-14 16:14:24 -07:00
