djsundog/circuitpython
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
10,392 Commits 21 Branches 274 Tags 785 MiB
9d484c4935
Commit Graph

192 Commits

Author SHA1 Message Date
Dan Halbert
4c2f729a7a
Merge pull request #713 from jepler/lto-type-diagnostic-bis 
Allow building on gcc 5.4, while preserving ability to build with 7.2
 2018-03-27 09:28:41 -04:00
Kattni
77938db8c8
Merge pull request #719 from tannewt/fix_i2c_hang 
Fix I2C init hang when the SCL pin is pulled low.
 2018-03-26 20:08:14 -04:00
Dan Halbert
4190aa2eed
Merge pull request #715 from jepler/array-operation-restrictions-bis 
Remove 'O', 'P' support in arrays
 2018-03-26 20:01:34 -04:00
Scott Shawcroft
cebcec5e63 Check for floating pins by pulling them low briefly before testing their values. 2018-03-26 16:32:16 -07:00
Jeff Epler
355bf8b553 Conditionally compile out nonstandard array/struct typecodes 
.. defaulting to off for circuitpython-supported boards, on for others.

.. fixing up the tests that fail when it is turned off, so that they skip
instead of failing
 2018-03-26 18:13:49 -05:00
Scott Shawcroft
25ba8ee489 Add an s because grammar. 2018-03-26 15:21:08 -07:00
Scott Shawcroft
37538fc0e7 Fix I2C init hang when the SCL pin is pulled low. 
We added a check to make sure the pins are in a high state before
initing the bus. This leads to a friendly error message when someone
forgets to add the pull up resistors to their circuit.
 2018-03-26 15:13:52 -07:00
Scott Shawcroft
ea39f4378e
Merge pull request #698 from sommersoft/repl_fix 
Fix 128 Character Max Paste Into REPL
 2018-03-26 13:02:43 -07:00
sommersoft
9bd55cf4c7
minor cleanup 2018-03-26 08:14:37 -05:00
sommersoft
23009fdd63 future-proof for buffer size changes 2018-03-26 06:25:04 +00:00
Dan Halbert
8b6aeb9e19
Merge pull request #702 from jepler/issue689bis 
correct typo in filename
 2018-03-25 23:58:00 -04:00
Jeff Epler
d57397f9c8 Remove an unneeded -Wno-error=lto-type-mismtach 2018-03-25 22:04:15 -05:00
Jeff Epler
c0029e1d97 Don't lose half of the processor's serial number 
Before this change, `microcontroller.cpu.uid` returned values
where the top 4 bits of each byte were zero, because of
an incorrect bitmask used in this function.
 2018-03-25 13:01:04 -05:00
Dan Halbert
31f5b6a238 WIP: simple working HID 2018-03-24 18:29:12 -04:00
Jeff Epler
d80e54458d correct typo in filename 2018-03-24 10:44:24 -05:00
sommersoft
6205ed9a0c updated cdc_enabled; now more dynamic status return 2018-03-24 03:42:58 +00:00
sommersoft
ef16109c5d updated with requested changes 2018-03-24 00:55:48 +00:00
sommersoft
f237657e5e extended buffer check to usb_cdc_background 2018-03-23 18:41:27 +00:00
Scott Shawcroft
63d826a52a
Update USB PID 2018-03-23 09:34:02 -07:00
sommersoft
ccbe557e30 removed leftover debugging bits 2018-03-23 15:45:30 +00:00
sommersoft
d434635822 add buffer check before triggering new usb read 2018-03-23 15:07:02 +00:00
Scott Shawcroft
fd7dcff4e9 Add Feather M4 Express support. 
* Also fixed detection of SPI flash chip to correct look in the 2+
spots.
* Added support for using QSPI in dual read mode.
 2018-03-23 00:00:13 -07:00
Scott Shawcroft
06b4c83f59 Add reminder to remove Saleae when going fast. 2018-03-22 17:44:44 -07:00
Scott Shawcroft
3bf4d69f67 Update Metro M4 to rev F and make flash reset on start. 2018-03-22 16:42:47 -07:00
Jeff Epler
a7e3c74fed Autocreate files that prevent MacOS indexing of the CIRCUITPYTHON dive 
.. the price of this appears to be about 112 bytes of flash and 12
bytes of RAM, according to the stats printed during the build.

It also uses up 4 directory entries (out of 128), but does not reduce
the number of blocks usable for storing file contents.

These are the same items noted in the Adafruit README for Trinket M0
as preventing MacOS indexing.

Closes: #689
 2018-03-22 08:07:32 -05:00
Scott Shawcroft
9ab39eb2d2
Merge pull request #688 from jepler/atsamd-build-reqs 
Better document build requirements and steps
 2018-03-20 10:03:01 -07:00
Scott Shawcroft
0f90f35606
Merge pull request #685 from jepler/uart-diagnostic 
UART: Fix maybe-uninitialized diagnostic
 2018-03-20 09:59:31 -07:00
Jeff Epler
3f82fe8da9 README.rst: document mpy-cross gotcha 
This was biting me, leading to an odd error later on.
 2018-03-20 07:53:30 -05:00
Jeff Epler
fa491b4c32 README.rst: spell out gcc version requirements 
.. the text was adapted from ports/stm32 and a conversation with
Dan Halbert.
 2018-03-20 07:53:30 -05:00
Jeff Epler
dddfad6594 UART: Fix maybe-uninitialized diagnostic 
The following error occurs when building with gcc 5.4.1 (debian stretch):

common-hal/busio/UART.c:104:83: error: 'sercom_index' may be used uninitialized in this function [-Werror=maybe-uninitialized]
                   sercom_insts[rx->sercom[j].index]->USART.CTRLA.bit.ENABLE == 0) ||

It may be related to the addition of rx-only UARTs; gcc is unable
to infer the intended relationship between have_tx and sercom_index
being set (I am still not entirely confident of it myself)
 2018-03-19 20:40:04 -05:00
Kattni
05e2a7d1ac Added digital pin assignments 2018-03-15 20:28:09 -04:00
jerryneedell
04b4026666
fix dotstar for Gemma_M0 in CP3.0 
Uncomment lines in mpconfigport.h for gemma_m0 to allow dotstar access.  same issue as #514 for trinket_m0
 2018-03-14 21:28:56 -04:00
Dan Halbert
f173d45941
Merge pull request #678 from tannewt/m0_no_timer_fix 
Correct NO_TIMER index value for SAMD21.
 2018-03-14 15:04:39 -04:00
Scott Shawcroft
88aa0e2660 Remove SERCOM pointers from pin data structure because index is 
enough.

This saves 380 bytes on the Arduino Zero build. (More pins ==
more savings.)
 2018-03-14 11:14:32 -07:00
Scott Shawcroft
7a3f86d184 Check usb_busy up front in usb background function. 
Waiting to do so risks accidentally queueing another response.

Hopefully fixes #655 but we'll let @jerryneedell confirm.
 2018-03-14 10:32:41 -07:00
Scott Shawcroft
c37ade9aeb Correct NO_TIMER index value for SAMD21. 
We check validity by ensuring it's lower than the total number of
timers. 0 is a terrible number for the NO_TIMER value because its
valid even though it shouldn't be.

Fixes https://github.com/adafruit/Adafruit_CircuitPython_SimpleIO/issues/29
 2018-03-13 12:44:00 -07:00
Dan Halbert
b64d568267
Merge pull request #677 from tannewt/usb_active_read 
Move usb read finish into interrupt.
 2018-03-13 15:16:40 -04:00
Scott Shawcroft
8157248189 Move usb read finish into interrupt. 
Having the `active_read = false` in the background function left
a chance that a new_write occurs before active_read is set to false.

In that case, we'll read the appropriate data rather than write it
and never clear the active write.

Hopefully fixes #655.
 2018-03-13 11:29:29 -07:00
vesperk38
945f2f5aa1
line 172 has a typo correct 2MB to 4MB 2018-03-13 13:42:29 -04:00
Radomir Dopieralski
81ab2526e4 gamepad: Enable the gamepad module for express boards in 3.x 2018-03-11 13:39:54 +01:00
Scott Shawcroft
e7fc0b6aa7 Use DMA for long SPI transactions including those to the SPI Flash. 
QSPI is not currently working so its commented out.

This is progress on #652.
 2018-03-09 12:45:46 -08:00
Bryan Siepert
942b7ffbe0 fixes hardware dotstar support for 3.0 and addresses issue #514 2018-03-08 20:39:47 -08:00
sommersoft
c1c3a79ec4 atmel-samd: changed Status to Runtime; instituted runtime singleton 2018-03-09 02:19:51 +00:00
Scott Shawcroft
01aceaae50 Support all boards and remove erase and page sizes because they never change. 2018-03-01 12:45:12 -08:00
Scott Shawcroft
2ab923862b Structify flash device definitions. 2018-02-28 19:15:54 -08:00
Dan Halbert
568c04e6af
Merge pull request #650 from tannewt/merge_2x 
Merge in commits from 2.x branch.
 2018-02-27 22:03:52 -05:00
Scott Shawcroft
bf05183158 Merge remote-tracking branch 'adafruit/2.x' into merge_2x 2018-02-27 15:24:16 -08:00
Dan Halbert
5c24023240 use CONF_GCLK_DAC_SRC and refactor a bit 2018-02-27 17:21:03 -05:00
Dan Halbert
4895a9d1d8 Use safe clock freqs for AnalogOut; use DAC REFRESH on SAMD51. 2018-02-27 15:44:27 -05:00
Bryan Siepert
e42209a6b2 fixes timer number assumptions for samd51s for issue #646 2018-02-27 00:42:40 -08:00
Dan Halbert
cc7acfd491 consistently brand Itsy Bitsy M0 as 'Express' 2018-02-26 17:37:03 -05:00
Dan Halbert
957a82b592 add board.RX and .TX pins to metro_m4_express_revb 2018-02-23 09:54:39 -05:00
Kattni
7399a1a5c7
Merge pull request #634 from dhalbert/3.0_UART 
Implement UART for 3.0 + related fixes.
 2018-02-21 23:07:27 -05:00
Dan Halbert
9b4477e1dc Implement UART for 3.0 + related fixes. 
1. UART: ported to ASF4. Allow rx-only and tx-only. Add .baudrate r/w property.

2. Make NeoPixel timing deterministic by turning off caches during NeoPixel writes.
3. Incorporate asf4 updates:
  a. async USART driver
  b. bringing Atmel START configuration closer to what we use
  c. Clock initialization order now specified by CIRCUITPY_GCLK_INIT_1ST and _LAST.
4. supervisor/port.c: Move commented-out clock-test pin setting to correct location.
 2018-02-21 17:18:49 -05:00
James Devine
9c5a9e3411
Update boards URL in README.rst 
Corrected a (probably) old URL in the read me.
 2018-02-21 16:14:46 +00:00
Scott Shawcroft
d02251f8cd Add a new board for Metro M4 Express Rev B. This is the board 
send to community members for testing.

Also tweaked and commented reset pin list for main Metro M4 Express
which is currently unreleased and is Rev D.
 2018-02-20 12:34:07 -08:00
Scott Shawcroft
653fc8877d Remove breakpoint instruction used for debugging. 2018-02-19 21:38:14 -08:00
sommersoft
60d6ccc731 changed spaced supervisor/Status.c line to tabbed 2018-02-20 03:44:45 +00:00
Scott Shawcroft
15f626be58 m4 qspi works. m0 compiles 2018-02-19 14:02:04 -08:00
Scott Shawcroft
f20d5723aa Reorganize things. Reading jdec works. 2018-02-19 14:02:04 -08:00
Scott Shawcroft
4710a2adba Compiles for m4. Untested on m0. 
This introduces a new spi_flash_api.h that works for both SPI and
QSPI. The previous spi_flash functions are now called external_flash
to minimize confusion.
 2018-02-19 14:02:04 -08:00
Scott Shawcroft
a2bd772d5c Begin rework to add qspi support. 2018-02-19 14:02:04 -08:00
sommersoft
9ee4d13756 added Status submodule to ports/atmel-samd/common-hal/supervisor; issue #544 2018-02-19 20:49:18 +00:00
Scott Shawcroft
a2b18b75d4 Fix loops and comma style. 2018-02-16 10:05:28 -08:00
Scott Shawcroft
eb2b41810a Turn on lto 2018-02-15 16:12:58 -08:00
Scott Shawcroft
538081528d pulsein works on m0 2018-02-15 16:04:39 -08:00
Scott Shawcroft
fcde138ea3 pulsein works on m4 2018-02-15 15:12:58 -08:00
Scott Shawcroft
07230f2637 pulsein compiles but doesn't work 2018-02-14 16:59:04 -08:00
Scott Shawcroft
c7af17525b m4 pulseout works 2018-02-14 11:38:52 -08:00
Scott Shawcroft
6a7d889dd4 m0 pulseout works. Factored out shared timer code. 2018-02-13 18:17:20 -08:00
Scott Shawcroft
8479eef578 m0 tc and tcc work 2018-02-13 16:44:04 -08:00
Scott Shawcroft
6c3075bec6 m4 tc and tcc works. multi-tcc channels ok too. 2018-02-13 14:22:55 -08:00
Scott Shawcroft
cc616aea4e m4 tc output works. Watch out for the PAC! 2018-02-12 23:41:26 -08:00
Scott Shawcroft
0397202288 m4 compiles, pwmout implemented but TC0 (A1) doesn't run 2018-02-09 17:21:06 -08:00
Scott Shawcroft
0398f308fa m4 compiles, pwmout implemented 2018-02-09 16:37:27 -08:00
Scott Shawcroft
190e7d629e WIP 2018-02-09 16:37:27 -08:00
Dan Halbert
b001c0711b Correct _etext location; clean up .ld files 
1. Make _extext and _sidata coincide. Old _etext location did not include
.ARM.exidx sections, which were usually absent but not always. So flash
data was copied to RAM in wrong place.
2. Use decimal constants with "K" and "M" suffixes in .ld files instead
of hex constants, to make them easier to read and check for accuracy.
 2018-02-09 11:31:18 -05:00
Dan Halbert
6be6df6ae4
Merge pull request #609 from tannewt/bitbangio 
Enable bitbangio now that we have digitalio.
 2018-02-08 21:24:32 -05:00
Scott Shawcroft
3e63f59867 Use write instead of set because it clears the bits before setting them. 2018-02-08 16:12:33 -08:00
Scott Shawcroft
aeae0090af Enable bitbangio now that we have digitalio. 
Also remove a rogue neopixel_write.
 2018-02-08 16:03:05 -08:00
Scott Shawcroft
82bc11585e ports/atmel-samd: Re-enable analogio 
This introduces SAMD51 support and re-enables SAMD21 support.

Fixes #263
 2018-02-08 14:48:08 -08:00
Bryan Siepert
dfc2b82ede Added SAMD51G support as per issue #597 2018-02-07 21:23:25 -08:00
Dan Halbert
eb49359aec CPX: typo in mpconfigboard.h broke CIRCUITPY 2018-01-30 15:48:22 -05:00
Dan Halbert
e550b024c5 atmel-samd: Correct computation of SPI baud rate. 
all: Add .frequency read-only property for busio.SPI to return actual frequency.

Fix esp8266/posix_helpers.c, which was not up to date for the new
long-lived/short-lived heap allocation scheme.
 2018-01-30 12:08:41 -05:00
Dan Halbert
a1e279a9d8
Merge pull request #556 from python-ugame/ugame10-3.0 
Update ugame port for the final ugame10 version
 2018-01-29 13:35:06 -08:00
Radomir Dopieralski
d595a03bbd Update ugame port for the final ugame10 version 
There have been multiple uGame prototypes with differences in the pins
and other details. This updates the board definition to fit the final
uGame 10 design.
 2018-01-29 22:19:09 +01:00
Radomir Dopieralski
189c62ac7d Bring back the _stage library 
I have tested the _stage module, and it works fine, so I'm including it
in he sources again. It's still disabled by default in the
mpconfigport.h.
 2018-01-29 21:24:46 +01:00
Dan Halbert
efbf08266b make _estack be double-word aligned 2018-01-24 19:24:36 -05:00
Scott Shawcroft
6560596864 Switch to m_malloc_maybe and m_free to reduce our dependence on gc_alloc. 
gc_alloc's API is changing and we shouldn't need to care about it.
So, we switch to m_malloc which has the default behavior we expect.
 2018-01-23 16:45:07 -08:00
brentrubell
ab1f133667 issue #536 CPX change SPI pin designations to externally available pins (#540) 
* issue #536 CPX

* switched pin assignment
 2018-01-22 19:31:55 -08:00
Tony DiCola
4bd1d09d74 Add missing Feather M0 RadioFruit boards: RFM69, RFM9x (#539) 2018-01-19 11:53:47 -08:00
sommersoft
44bc1711aa Added Unique ID Functions/Updated Support Matrix (#527) 
shared_bindings/index.rst: updated Support Matrix format as discussed in PR #503 & Issue #448.

shared-bindings/microcontroller/Processor.c & .h: added UID lookup functionality for use with all ports. Fixes #462.
 2018-01-18 11:39:11 -08:00
Dan Halbert
01443a9619 Make chosen features consistent across all boards and ports atmel-samd, esp8266, and nrf. 
1. Turn off MICROPY_CPYTHON_COMPAT, which includes a number of minor CPython compatibility features,
most of which have workarounds, but uses up significant flash.
2. Turn on MICROPY_PY_SYS_MAXSIZE, which implements sys.maxsize.
3. Turn on MICROPY_CAN_OVERRIDE_BUILTINS, which implements "_" as the most recent value in the REPL,
and also enables redefining builtins.
 2018-01-16 18:11:54 -08:00
Dan Halbert
2d5483082d Checked wrong RCAUSE bit for system_reset 2018-01-08 15:45:07 -08:00
Dan Halbert
1805bcac76 enable use of CIRCUITPY_CANARY_WORD (needed for 2.2 merge) (#513) 
enable use of CIRCUITPY_CANARY_WORD (needed for 2.2 merge)

RCAUSE (reset cause) is fetched differently in SAMD21 vs SAMD51
 2018-01-08 09:44:06 -08:00
Dan Halbert
d0cc8abd31 revise boards/ files for 3.0. All now compiled (but I don't have all to test). 2018-01-04 14:16:53 -05:00
Dan Halbert
d8686cc002 use correct LD_FILE in mpconfigboard.mk for boards with external flash 2018-01-03 16:49:38 -05:00
Dan Halbert
065e82015f merge from 2.2.0 + fix up board defs 2018-01-02 21:25:41 -05:00
Dan Halbert
ce81c8dda9 Avoid gcc 7.2.1 compiler issues in nlr_push() (#506) 
Avoid gcc 7.2.1 compiler issues in nlr_push()
 2018-01-02 13:41:34 -08:00
Dan Halbert
72c911be97 Support SPI flash chips for CIRCUITPY, using non-DMA SPI for now. 2017-11-27 21:00:24 -05:00