Jeff Epler
ed0cb248e9
esp32s2: Fix 'make flash'
...
As reported by @jerryneedell, this change was incorrect; the given
ESPTOOL_FLAGS caused `write_flash` to be repeated twice, which doesn't
work.
Closes #3981 .
2021-01-12 16:04:29 -06:00
Jeff Epler
4735cf4747
esp32s2: audiobusio: move i2s_common inside
...
Originally, I believed the implementation might be shared with AudioOut,
as on the ESP32 (non-S2) the I2S peripheral was also used to drive the DAC.
However, this is not the case on ESP32-S2 and appears it will not be
the case with the ESP32-S3 or -C3, to the extent that there's skeletal
support for either of them in esp-idf master branch.
However, it could still be shared by I2SIn or PDMIn (the latter being
hypothetically implemented as I2SIn + digital postprocessing like we did
in the atmel-sam port, to my understanding), so I moved it to
the common-hal folder.
2021-01-09 14:02:47 -06:00
Jeff Epler
7bb196b9d2
esp32s2: 'make flash': Allow customizing the esptool flags
...
This can be useful so that e.g., on a Kaluga when programming via
the FTDI chip, you can override the variable to specify "--after=hard_reset"
to automatically return to running CircuitPython, choose a different
baud rate (921600 is about 2s faster than 460800), etc:
make BOARD=espressif_kaluga_1 ESPTOOL_FLAGS="-b 921600 --before=default_reset --after=hard_reset"
2021-01-07 15:01:33 -06:00
Jeff Epler
30c6dd3f76
Merge remote-tracking branch 'origin/main' into audioout-esp32
2021-01-07 14:11:14 -06:00
microDev
28ce5e8988
Merge branch 'main' into touch-s2
2020-12-30 22:44:22 +05:30
Jeff Epler
a7542598a0
esp32s2: add I2SOut
2020-12-29 14:46:38 -06:00
Dan Halbert
8061a2574d
Merge branch 'main' into pin_alarm
2020-12-23 22:05:02 -05:00
Jeff Epler
da8f023665
esp32s2: make flash: use the stub
...
Very long ago, this was apparently not supported in esptool yet, at
least when operating over USB CDC. This now works just fine, and
our esp webtool relies on it as well. It makes flashing faster,
too.
2020-12-22 10:27:42 -06:00
microDev
a60fabdffa
add touch alarm support for esp32s2
2020-12-19 12:56:34 +05:30
microDev
4512290ba0
Merge branch 'main' into ota-s2
2020-12-18 00:44:00 +05:30
Scott Shawcroft
0dcc659d53
Swap to IDF release/4.2 branch for stability
2020-12-15 18:12:59 -08:00
BennyE
81c4871fdf
Set DEBUG CFLAG if set in make
2020-12-11 22:11:39 +01:00
microDev
602243748b
add ota support for esp32s2
2020-12-08 11:45:00 +05:30
Dan Halbert
596e0e4bd2
merge from upstream
2020-11-27 16:06:57 -05:00
Dan Halbert
ef0830bfe2
merge from upstream + wip
2020-11-25 17:52:06 -05:00
hierophect
510f464234
Merge branch 'main' into esp32s2-udp
2020-11-24 18:28:10 -05:00
microDev
bbe13490b5
Merge branch 'main' into nvm-s2
2020-11-24 12:24:48 +05:30
Dan Halbert
7a45afc549
working, but need to avoid deep sleeping too fast before USB ready
2020-11-23 22:44:53 -05:00
Lucian Copeland
8ffd973e22
Merge remote-tracking branch 'upstream/main' into esp32s2-udp
2020-11-23 18:40:14 -05:00
microDev
ff987e7496
add timer peripheral
2020-11-18 12:16:14 +05:30
Lucian Copeland
0bbdf05936
Implement recvfrom_into and sendto for UDP
2020-11-17 16:11:04 -05:00
microDev
35ef6c687f
nvm implementation for esp32s2
2020-11-11 23:11:12 +05:30
microDev
d8ef9a127b
rename pcnt_handler to pcnt
2020-11-05 10:10:39 +05:30
microDev
fe6bfde590
move pcnt handler
2020-11-04 21:20:24 +05:30
microDev
4438050f79
Add pcnt handler
2020-11-01 18:00:07 +05:30
Jeff Epler
8ddbebd2c1
esp32s2: fix build after qstr rule changes
2020-10-12 13:35:15 -05:00
Lucian Copeland
97d217a764
Merge remote-tracking branch 'upstream/main' into esp32-analogin
2020-10-08 12:34:58 -04:00
hathach
e1fc85c56b
fix usb issue with latest idf
2020-10-08 13:30:32 +07:00
Scott Shawcroft
8c428a3bdd
Merge pull request #3492 from hierophect/esp32-update-idf
...
ESP32S2: move to official IDF submodule
2020-10-06 16:53:32 -07:00
hierophect
e93a274f2f
Merge branch 'main' into esp32-analogin
2020-10-05 13:02:42 -04:00
Lucian Copeland
a8dfae58d9
Add ADC calibration module support
2020-10-01 17:17:39 -04:00
Lucian Copeland
9a3bd82f40
Update TinyUSB include compatibility
2020-10-01 13:19:54 -04:00
Lucian Copeland
0bbd067a17
Revert ADC calibration removal, complete merge
2020-10-01 13:06:48 -04:00
Lucian Copeland
c624c1e838
Merge branch 'esp32-update-idf' into esp32-analogin
2020-09-30 16:51:19 -04:00
Lucian Copeland
e01e8dd6b9
Revert HAL refactor changes to avoid USB breaking changes past esp-idf dde6222cd
2020-09-30 16:36:13 -04:00
Lucian Copeland
66b8559fd4
Change submodule, rework all includes
2020-09-30 11:26:07 -04:00
Scott Shawcroft
abdbbf9e24
One grep
2020-09-28 15:10:12 -07:00
Lucian Copeland
128b4a013b
Add non-calibrated ADC
2020-09-28 12:11:08 -04:00
Scott Shawcroft
17bdc969db
Reorganize sdkconfigs and release UF2s
2020-09-17 16:01:23 -07:00
Scott Shawcroft
2bd169ec32
Add partition layouts for 8 and 16 MB as well.
2020-09-15 18:12:06 -07:00
Lucian Copeland
ecc219fe50
Merge remote-tracking branch 'upstream/main' into esp32-displayio-fix
2020-09-14 10:44:31 -04:00
Lucian Copeland
4733a67226
Add GDB debugging capability
2020-09-02 11:27:42 -04:00
Scott Shawcroft
1034cc1217
Add espidf module.
2020-08-19 14:23:28 -07:00
Scott Shawcroft
eb2c38825e
HTTP works with my adafruit_requests
2020-08-19 14:23:18 -07:00
Scott Shawcroft
3860991111
Ping work and start to add socketpool
2020-08-19 14:22:13 -07:00
Scott Shawcroft
cdab5e793e
Update to latest idf
2020-08-19 14:22:13 -07:00
Scott Shawcroft
1a6f4e0fe0
Scanning WIP. Need to sort out supervisor memory
2020-08-19 14:22:12 -07:00
Scott Shawcroft
c5b8401a15
First crack at native wifi API
2020-08-19 14:21:59 -07:00
Lucian Copeland
1c1df053d5
Add neopixel support
2020-07-31 15:34:12 -04:00
DavePutz
3dfed3c4aa
Merge pull request #15 from adafruit/main
...
update from main
2020-07-24 20:29:53 -05:00
