djsundog/circuitpython
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
20,903 Commits 21 Branches 274 Tags 785 MiB
9b5d131bf6
Commit Graph

392 Commits

Author SHA1 Message Date
Dan Halbert
b6206406de new pin validation routines; don't use mp_const_none if NULL will do 2020-02-28 23:43:04 -05:00
TG-Techie
527eb2444c added TG-Watch02A pins 2020-02-28 04:11:54 -05:00
TG-Techie
6d4ffc69fd add TG-Watch02A 2020-02-28 02:52:46 -05:00
ladyada
86e9fd170a move red LED to D13 and make D3 lsm6ds IRQ 2020-02-25 18:00:23 -05:00
Scott Shawcroft
e97b0cfc61
Merge pull request #2581 from jamesbowman/master 
First draft of eveL, the low-level module of the Gameduino bindings
 2020-02-13 11:21:32 -08:00
Dan Halbert
e00b3269fe use properly-sized SPI transactions 2020-02-12 15:04:19 -05:00
Dan Halbert
2e029d55fc nrf: add SPIM3 support 2020-02-11 19:22:14 -05:00
Drew Fustini
3bf4b42e2e change OH20 badge pin defs to use SWn for buttons 
Rather than use A, B, C and D

Use the buttons according to silkscreen references:
SW1
SW2
SW3
SW4
 2020-02-10 00:49:13 +01:00
Drew Fustini
0a54f88751 add pin defs for buttons on the OHS2020 badge 2020-02-10 00:32:16 +01:00
James Bowman
acef93a253 Rename eveL to _eve, EVEL to _EVE 2020-02-05 18:17:58 -08:00
James Bowman
7fd30e7d20 First draft of eveL, the low-level module of the Gameduino (and BridgeTek EVE) bindings. 
[adafruit/circuitpython#2578]
 2020-02-03 16:46:14 -08:00
Lady Ada
5a29b222eb add bluefruit sense - tested 2020-02-03 13:52:30 -05:00
Michael Welling
64cafe82bc Adjust OHS2020 madctl for default rotation 
Make to go faster I guess.

Signed-off-by: Michael Welling <mwelling@ieee.org>
 2020-02-02 22:14:10 -08:00
Michael Welling
6804b2a7fd Add I2C pin definitions for interoperability with Adafruit libraries 
Signed-off-by: Michael Welling <mwelling@ieee.org>
 2020-02-02 22:13:39 -08:00
Michael Welling
33dcdd7c03 Updates to enable working SPI TFT 
The backlight enable is active low on our board so the driver doesn't like it.
Toggling to GPIO manually for now.

As fixed the improper SPI bus pins definitions and it works!

Signed-off-by: Michael Welling <mwelling@ieee.org>
 2020-02-02 22:13:03 -08:00
Michael Welling
d99c2ffe4f QSPI flash fixes 
We had the pin names swapped on the schematic and a different flash was populated.

Signed-off-by: Michael Welling <mwelling@ieee.org>
 2020-02-02 22:11:12 -08:00
Lady Ada
dc964b346c adjust CLUE madctl so rotation 0 is 'right' 2020-01-31 20:17:39 -05:00
Dan Halbert
be4e681d07 fix UICR check; do not use NULL for no MISO 2020-01-31 18:57:41 -05:00
Dan Halbert
4abd5f1f7b increase max connections from 2 to 5 2020-01-31 14:58:23 -05:00
Dan Halbert
b6358182d3 Update CLUE to Rev C 2020-01-30 15:22:26 -05:00
Wojtek Siudzinski
df5e58fc6e Add support for the Particle Ethernet FeatherWing 2020-01-28 10:53:50 +01:00
Lady Ada
f2dfcee042 add missing displayref 2020-01-26 20:10:20 -05:00
Dan Halbert
68f9aee992 reset NeoPixels on CPB on soft reload 2020-01-23 20:16:31 -05:00
Michael Welling
cc77e86408 Update the VID and USB company string 
Signed-off-by: Michael Welling <mwelling@ieee.org>
 2020-01-16 15:43:49 -08:00
Michael Welling
cc03d68984 Fix backlight pin registration 
Signed-off-by: Michael Welling <mwelling@ieee.org>
 2020-01-16 14:53:07 -08:00
Michael Welling
86d454adf3 Initial board support for OHS2020 Badge 
Not tested but builds.

Signed-off-by: Michael Welling <mwelling@ieee.org>
 2020-01-16 13:46:56 -08:00
Benny Meisels
4bf10a75c7 Add board definition files for AramCon Badge 2019 2020-01-16 00:44:18 +02:00
Scott Shawcroft
82fb761c0f
Add PacketBuffer and MTU negotiation support. 
PacketBuffer facilitates packet oriented BLE protocols such as BLE
MIDI and the Apple Media Service.

This also adds PHY, MTU and connection event extension negotiation
to speed up data transfer when possible.
 2020-01-03 17:29:54 -08:00
Dan Halbert
f0d34da556 add display support; rotation 270 2019-12-30 17:39:39 -05:00
Dan Halbert
3f9ebd2fed initial CLUE board defn 2019-12-30 17:10:42 -05:00
JoeBakalor
2abccc1745 update vid and pid for teknikio_bluebird 2019-12-16 08:58:56 -05:00
JoeBakalor
32744a04e1 update bluebird make file 2019-12-13 09:08:21 -05:00
Joe Bakalor
3992a870e5
Merge branch 'master' into teknikio/bluebird 2019-12-13 08:55:15 -05:00
JoeBakalor
4bee6536c9 updates to bluebird 2019-12-13 08:52:03 -05:00
Joe Bakalor
b484c89b73
Merge pull request #4 from adafruit/master 
Pull master
 2019-12-13 08:51:06 -05:00
Dan Halbert
e11fabd5e0 moved nrf internal filesystem to just below bootloader 2019-12-12 14:57:23 -05:00
JoeBakalor
dde7c5e145 Merge branch 'master' of https://github.com/Teknikio/circuitpython 2019-12-12 08:59:37 -05:00
Joe Bakalor
bf4138b0e4
Merge pull request #3 from adafruit/master 
Pull master
 2019-12-12 08:59:22 -05:00
JoeBakalor
0da5dceccf update bluebird makefile 2019-12-11 15:25:16 -05:00
JoeBakalor
a273a7c55e add remaining peripheral pin maps and digital/analog pin definitions 2019-12-11 15:23:16 -05:00
JoeBakalor
006d85d5c2 add make file and board configuration, add accelerometer pin mappings 2019-12-11 14:49:59 -05:00
Dan Halbert
d9ca4c9a60 fix build failures 2019-12-10 22:39:44 -05:00
Dan Halbert
c6221c5956 Remove no-longer-used nrf and atmel-samd .ld files 2019-12-10 21:22:17 -05:00
Dan Halbert
68ae47907c merge from upstream 2019-12-10 21:04:46 -05:00
Dan Halbert
013c840862 working on all ports 2019-12-10 20:27:30 -05:00
Dan Halbert
60f399395a Add POWER_SWITCH pin to CPB 2019-12-09 18:30:24 -05:00
Dan Halbert
40434d6919 wip 2019-12-05 22:45:53 -05:00
Joe Bakalor
ba83a4a2ac
Merge pull request #1 from adafruit/master 
Update base
 2019-11-05 11:06:18 -05:00
JoeBakalor
8ab3ef44dd add bluebird template files 2019-11-05 10:52:25 -05:00
Dan Halbert
8cd2f87e99
Merge pull request #2236 from tannewt/bleio_tweaks 
Refine _bleio
 2019-11-04 22:27:54 -05:00
Dan Halbert
e3638ffaad
Merge pull request #2262 from jepler/cpb-speaker-disable 
cpb: Disable the onboard speaker until request
 2019-11-03 18:34:29 -05:00
Dan Halbert
85a648224f Check for no pullups on I2C on nrf; give arduino nano 33 ble two I2C devices 2019-11-02 22:47:03 -04:00
jepler
2bdccf03a7 cpb: define the SPEAKER_ENABLE_PIN 
This allows the board to disable the onboard speaker until explicitly
enabled in user code.

Testing performed on a CPB:
 * Touching the AUDIO pin with a fingertip no longer generates noise/buzz
 * Generating a waveform with `simpleio.tone` produces no sound by default
 * When the board.SPEAKER_ENABLE is configured as a digital output and
   set True, `simpleio.tone` does produce sound

Note that while guides should include information about SPEAKER_ENABLE, it's
possible that some users who omitted it could view this as a breaking change.
They can fix it by simply adding code similar to

    speaker_enable = digitalio.DigitalInOut(board.SPEAKER_ENABLE)
    speaker_enable.direction = digitalio.Direction.OUTPUT
    speaker_enable.value = True

before using the internal speaker.

Closes: #2258
 2019-11-01 16:26:03 -05:00
Scott Shawcroft
47e50e5659
Merge remote-tracking branch 'adafruit/master' into bleio_tweaks 2019-11-01 13:20:58 -07:00
Dan Halbert
e35eb08f1d nrf: allocate two I2C on CPB 2019-10-28 21:08:53 -04:00
Dan Halbert
358920db0e Use MICROPY_PY_SYS_PLATFORM in mpconfigport.h only 2019-10-28 10:40:10 -04:00
Jeff Epler
1103490223
Merge pull request #2244 from dhalbert/itsybitsy_nrf52840_express 
Initial Itsy nRF52840 defn
 2019-10-27 16:46:28 -05:00
Dan Halbert
ab6fd34828 add object types to rgb status objects;mark spi rgb objects as never_reset 2019-10-25 22:32:43 -04:00
Dan Halbert
7d04d9109e use bitbang SPI for DotStar; still need to fix hw SPI for dotstar 2019-10-25 15:37:27 -04:00
Dan Halbert
cdeb0857a9 Initial Itsy nRF52840 defn 2019-10-25 11:15:34 -04:00
Scott Shawcroft
ae30a1e5aa
Refine _bleio 
This PR refines the _bleio API. It was originally motivated by
the addition of a new CircuitPython service that enables reading
and modifying files on the device. Moving the BLE lifecycle outside
of the VM motivated a number of changes to remove heap allocations
in some APIs.

It also motivated unifying connection initiation to the Adapter class
rather than the Central and Peripheral classes which have been removed.
Adapter now handles the GAP portion of BLE including advertising, which
has moved but is largely unchanged, and scanning, which has been enhanced
to return an iterator of filtered results.

Once a connection is created (either by us (aka Central) or a remote
device (aka Peripheral)) it is represented by a new Connection class.
This class knows the current connection state and can discover and
instantiate remote Services along with their Characteristics and
Descriptors.

Relates to #586
 2019-10-21 18:57:03 -07:00
Dan Halbert
7b79ac3739 Parameterize linker script 2019-10-20 23:50:12 -04:00
Dan Halbert
fc19e03128 WIP: bonding 2019-10-06 21:30:26 -04:00
Dan Halbert
aa1eed3bd3 initial Arduino Nano 33 BLE board definition 2019-09-26 15:28:57 -04:00
Dan Halbert
3c22c690c8 CPB A1 pin mapping wrong; remove A7 2019-09-06 14:17:11 -04:00
Dan Halbert
0b7291d767 fix default crystal value; fix include order 2019-08-22 09:01:05 -04:00
Dan Halbert
acc6df4959 merge similar fix in 2019-08-22 01:29:34 -04:00
Dan Halbert
d94023e9b3 Fix CPBlue LFCLKSRC; CPB has no status neopixel 2019-08-22 01:04:00 -04:00
Scott Shawcroft
85d7398476
Merge pull request #2066 from dhalbert/ble-pairing 
BLE: more features
 2019-08-16 14:50:00 -07:00
Dan Halbert
5877bd6036 CPblue initial definition 2019-08-13 22:12:36 -04:00
Dan Halbert
243334da75 Merge remote-tracking branch 'adafruit/master' into ble-pairing 2019-08-05 23:06:24 -04:00
Dan Halbert
c56566179a Metro nRF52840 rev A defn; also remove '#define FEATHER52840' from mpconfigboard.h files 2019-08-05 18:10:27 -04:00
Dan Halbert
28ca05ccdc allow discovery from central or peripheral 2019-07-27 13:22:15 -04:00
Scott Shawcroft
a98bfa628e
Merge pull request #2002 from ntavish/blip_improvements 
Blip improvements
 2019-07-19 10:52:08 -07:00
Tavish Naruka
724ce4acba enable libraries needed by BlipBoy Shield 2019-07-19 18:48:08 +05:30
Scott Shawcroft
6fad383367
Merge pull request #1925 from C47D/rgb_status 
Initial support for RGB led as Status indicator, fixes #1382
 2019-07-09 10:31:34 -07:00
Scott Shawcroft
5610e05b8c
Fix up nrf so that it is initialized properly. Also, do not reset 
it's pins.
 2019-07-06 12:48:16 -07:00
Tavish Naruka
4a7122d354 boards: add support for Electronut labs Blip 
Signed-off-by: Tavish Naruka <tavishnaruka@gmail.com>
 2019-06-05 00:49:29 +05:30
Dan Halbert
c0ce820974
Merge pull request #1803 from nickzoic/circuitpython-nickzoic-1042-nrf-nvm-bytearray-3 
Circuitpython nickzoic 1042 nrf nvm bytearray 3
 2019-04-16 15:05:18 -04:00
Tavish Naruka
32a0855d18 Add support for Electronut Labs Papyr. 
Signed-off-by: Tavish Naruka <tavishnaruka@gmail.com>
 2019-04-16 12:59:42 +05:30
Nick Moore
02dd32da60 Make some space for NVM adafruit/circuitpython#1042 2019-04-16 14:53:44 +10:00
Nick Moore
d0e5af3b09 Working flash pages for nvm.ByteArray adafruit/circuitpython#1042 
import microcontroller

def dump(n = microcontroller.nvm):
    for i in range(0,len(n)):
        print ("%02X " % n[i], end="")
        if i % 16 == 15: print('')

microcontroller.nvm[0:4096] = bytes([1,2,3,4,5,6,7,8]) * 512
microcontroller.nvm[4096:8192] = bytes([16,17,18,19]) * 1024
microcontroller.nvm[4090:4101] = b'thisisatest'
microcontroller.nvm[100:105] = b'hello'
microcontroller.nvm[8000:8007] = b'goodbye'
dump()
 2019-04-16 14:53:44 +10:00
Nick Moore
933500c448 nvm.ByteArray reads & writes but no sensible erase yet adafruit/circuitpython#1042 2019-04-16 14:53:44 +10:00
Nick Moore
df89156f2f Start on nRF nvm.ByteArray adafruit/circuitpython#1042 (doesn't do anything yet) 2019-04-16 14:53:44 +10:00
Scott Shawcroft
254d0a53ac
Revert "nrf nvm: touchups to nickzoic PR #1768" 2019-04-15 18:50:33 -07:00
Dan Halbert
3618461f9b Merge remote-tracking branch 'adafruit/master' into circuitpython-nickzoic-1042-nrf-nvm-bytearray-2 2019-04-10 14:09:26 -04:00
Nick Moore
fdaff00c78 Make some space for NVM adafruit/circuitpython#1042 2019-04-09 10:56:53 +10:00
Nick Moore
8e7fee2246 Working flash pages for nvm.ByteArray adafruit/circuitpython#1042 
import microcontroller

def dump(n = microcontroller.nvm):
    for i in range(0,len(n)):
        print ("%02X " % n[i], end="")
        if i % 16 == 15: print('')

microcontroller.nvm[0:4096] = bytes([1,2,3,4,5,6,7,8]) * 512
microcontroller.nvm[4096:8192] = bytes([16,17,18,19]) * 1024
microcontroller.nvm[4090:4101] = b'thisisatest'
microcontroller.nvm[100:105] = b'hello'
microcontroller.nvm[8000:8007] = b'goodbye'
dump()
 2019-04-09 10:55:39 +10:00
Nick Moore
492431a694 nvm.ByteArray reads & writes but no sensible erase yet adafruit/circuitpython#1042 2019-04-09 10:54:11 +10:00
Nick Moore
f8e5e2da64 Start on nRF nvm.ByteArray adafruit/circuitpython#1042 (doesn't do anything yet) 2019-04-09 10:54:11 +10:00
Scott Shawcroft
0f003ac5b8
Reorganize board busses into shared-bindings and shared-module. 2019-04-08 16:58:50 -07:00
Dan Halbert
fe555a4098 Allow NFC pins to be used for other purposes. 2019-03-21 11:22:58 -04:00
Jerry Needell
bd13834a74 implement default busses for particle boards 2019-02-24 09:34:33 -05:00
Dan Halbert
9c24c804fb Fix #ifdefs in port.c to call xxx_reset() rroutines properly. Remove most uses of EXPRESS_BOARD. 2019-02-18 22:44:31 -05:00
Dan Halbert
7b3f7605b8 address @tannewt changes: move and rename common files; remove PORT_HEAP_SIZE 2019-02-15 20:32:32 -05:00
Dan Halbert
a345ef28f2 finish Makefile refactoring; nrf builds work 2019-02-15 18:55:10 -05:00
Scott Shawcroft
6404aaf411
Fix up nrf and using board.SPI in FourWire 2019-01-17 18:19:07 -08:00
Scott Shawcroft
760bd8d8a4
share fourwire and make nrf compile 2019-01-17 15:15:59 -08:00
Scott Shawcroft
c1e6624f8f
Merge pull request #1470 from gpshead/mdk_usb_dongle 
Add Makerdiary nRF52840 MDK USB dongle support.
 2019-01-15 23:05:15 -08:00
dsiee
af0f1a7542
Update pins.c 
whitespace
 2019-01-16 15:02:48 +11:00
dsiee
c2d39a7ab7
Update pins.c 2019-01-16 14:58:16 +11:00
dsiee
ac238838f2
Update pins.c 
add declaration for RED_LED as D3 to match silkscreen.
 2019-01-16 14:48:41 +11:00
Gregory P. Smith
7296b647ef Add MDK nRF52840 MDK USB Dongle support. 
Adds support for https://wiki.makerdiary.com/nrf52840-mdk-usb-dongle/.

A cheap nRF52840 USB stick with optional headers, very Trinket and Itsy like.
 2019-01-15 01:37:22 -08:00
Dan Halbert
b6b5ed9c89 Remove nRF52832 support 2018-12-30 22:49:20 -05:00
Jerry Needell
55084b30ef remome FRAMEBUF from nrf builds - use QSPI for particle ARGON 2018-12-27 09:38:35 -05:00
Scott Shawcroft
8fc72e8978
Add SPI and I2C to SparkFun nRF52840 mini definition and add it to Travis. 2018-12-10 20:32:19 -08:00
Scott Shawcroft
8a981dc8e8
Merge remote-tracking branch 'adafruit/master' into sfe840 2018-12-10 20:13:36 -08:00
Scott Shawcroft
6ef8639971
Rework safe mode and have heap overwrite trigger it. 
This creates a common safe mode mechanic that ports can share.
As a result, the nRF52 now has safe mode support as well.

The common safe mode adds a 700ms delay at startup where a reset
during that window will cause a reset into safe mode. This window
is designated by a yellow status pixel and flashing the single led
three times.

A couple NeoPixel fixes are included for the nRF52 as well.

Fixes #1034. Fixes #990. Fixes #615.
 2018-12-06 14:24:20 -08:00
Scott Shawcroft
b25bf062fb
Add correct flash chip for Particle Mesh boards 2018-12-04 18:20:51 -08:00
Scott Shawcroft
15c1fc873c
Add particle boards, fix cp32 and try to speed up atmel build 2018-12-04 18:20:48 -08:00
Dan Halbert
63cd9209f1 allow KeyboardInterrupt on UART read; fix nrf UART pin claiming; rename feather 52840 UART pins 2018-12-04 15:05:39 -05:00
jimblom
09316b35d7 remove non-broken-out nrf pins. re-organize pins.c list. 2018-11-30 14:58:36 -07:00
jimblom
f67814fc97 Adding SparkFun nRF52840 Mini board support. 2018-11-30 13:57:22 -07:00
Scott Shawcroft
d446d328d8
Fix QSPI on Feather nRF52840 
We were writing with quad page program including the address (0x38)
which is unsupported by the GD25Q16C but it is supported by the
flash on the DK. So, we use the single address, quad data command
(0x32).
 2018-11-27 00:13:24 -08:00
Scott Shawcroft
15eeac5d4b
A few fixes for nRF52840 feather QSPI and neopixel 2018-11-23 14:22:07 -08:00
Dan Halbert
5fe746f643 Latest Feather nRF52840 pin revisions 2018-11-21 19:46:49 -05:00
Scott Shawcroft
9d91111b1b
Move atmel-samd to tinyusb and support nRF flash. 
This started while adding USB MIDI support (and descriptor support is
in this change.) When seeing that I'd have to implement the MIDI class
logic twice, once for atmel-samd and once for nrf, I decided to refactor
the USB stack so its shared across ports. This has led to a number of
changes that remove items from the ports folder and move them into
supervisor.

Furthermore, we had external SPI flash support for nrf pending so I
factored out the connection between the usb stack and the flash API as
well. This PR also includes the QSPI support for nRF.
 2018-11-08 17:25:30 -08:00
Dan Halbert
64d457dad9 bring bleio PR up to date 2018-11-07 14:12:22 -05:00
arturo182
d5a71a4b8a nrf: Move bluetooth driver to the 'bluetooth' folder 2018-10-21 15:55:25 +02:00
Josh Klar
aefabc5353
Update docs to reflect proper size of device 2018-10-20 03:29:20 -07:00
Josh Klar
4c75a60bd3
Declobber a DEFINE 2018-10-20 02:57:17 -07:00
Josh Klar
16ca9c8c7c
Makefile fixes and some docs 2018-10-20 02:43:13 -07:00
Josh Klar
3d7b96aeb1
Add board and pin defs for MakerDiary NRF52840 MDK 2018-10-20 02:43:12 -07:00
hathach
f724647a45 fix feather nrf52840 build error 2018-09-25 17:09:54 +07:00
hathach
2f0e0bdcaf migrate serial from uart to uarte 2018-09-25 16:14:44 +07:00
hathach
7a1b4ccc9b Merge branch 'master' into nrf52_uart_io 2018-09-24 12:50:48 +07:00
hathach
c5593ec074 got uart tx work 2018-09-19 17:59:15 +07:00
hathach
1df3bcf392 add board.UART() function 2018-09-19 14:40:37 +07:00
hathach
d8c8c5f005 remove CFG_HWUART_FOR_SERIAL 2018-09-18 20:26:50 +07:00
Pierrick C
7e8816ad6f Add VOLTAGE_MONITOR alias to pin D31/A7 2018-09-13 23:46:47 +02:00
Dan Halbert
e335c74ac6 use open-drain capabilities on GPIO; clean up board init; set correct GPIO voltage 2018-09-09 15:01:28 -04:00
Dan Halbert
4382389e6f fix typos, remove incorrect pca10059 example; add default buses for pca10056; improve board names for pca boards 2018-09-01 00:29:36 -04:00
Dan Halbert
9ea809bef7 add pin claiming to devices 2018-08-31 18:38:05 -04:00
Dan Halbert
585597a252 pin files rework; implement pin claiming; add more boards 2018-08-31 18:05:55 -04:00
ladyada
ded38d30b6 rename pin.h to nrf_pin.h to avoid conflict with Pin.h 2018-08-26 20:37:12 -04:00
Dan Halbert
4cc33f8de6 Merge remote-tracking branch 'adafruit/master' into nrf_board_rename 2018-08-23 16:25:57 -04:00
hathach
7961103ee6 update SD to v6.1.0 2018-08-22 21:51:30 +07:00
Dan Halbert
eaf4d19dbb Merge remote-tracking branch 'adafruit/master' into nrf_board_rename 
Merge #1137
 2018-08-22 10:24:10 -04:00
hathach
a516d1123f fix typos 2018-08-22 19:42:41 +07:00
hathach
fc955b1591 remove bootloader binaries, update readme for using adafruit-nrufitl and flashing bootloader 2018-08-22 15:22:17 +07:00
Dan Halbert
c503cf990b forgot to change .travis.yml 2018-08-21 20:35:58 -04:00
Dan Halbert
85df32907f rename nrf boards to feather_nrf52832 and feather_nrf52840_express 2018-08-21 18:45:37 -04:00
hathach
df4184e478 rename linker file to SD major version only 2018-08-21 16:02:57 +07:00
hathach
e1ccc07841 remove bootloader & dfu-bootloader target 
user should go to bootloader repo to upgrade bootloader
 2018-08-14 20:19:28 +07:00
hathach
3525d65af3 should fix #1021 
- update tinyusb for wanted char
- move usb code into usb.c
 2018-07-17 21:24:49 +07:00
hathach
f98c7f708e merge review 2018-07-12 01:37:23 +07:00
hathach
10846d316b Merge branch 'master' into nrf52840_usbboot 2018-07-11 21:35:44 +07:00
hathach
a53b1c7cf1 code format 2018-07-10 22:49:51 +07:00
arturo182
2c63fb2a94 nrf: Remove the random hal and module 
Thus getting rid of the whole old hal!
The module is not needed because the common-hal
nRF implementation uses HW RNG anyway.
 2018-07-10 14:59:22 +02:00
hathach
0e819599e7 Merge branch 'master' into nrf52840_usbboot 2018-07-10 02:02:52 +07:00
hathach
7715d19efe update bootloader hex 2018-07-10 01:20:37 +07:00
hathach
97a1ae911e add family option for uf2 2018-07-10 01:18:14 +07:00
arturo182
25ece8fb3d nrf: Rewrite the UART HAL using nrfx 2018-07-08 16:42:04 +02:00
arturo182
c6a2a55bc9 nrf: Cleanup mpconfigboard files 
All the removed defines were used by legacy modules that are now
removed.
 2018-07-08 15:18:11 +02:00
hathach
948ddf8463 make SD default to s140 and s132 for nrf52840 and nrf52832 
add CFG_HWUART_FOR_SERIAL for using jlink as REPL
 2018-07-06 14:39:49 +07:00
hathach
7fff7f5e70 add usb msc support for nrf52840 2018-07-04 16:40:53 +07:00
hathach
46c453cf0a add tinyusb as submodule 2018-07-03 17:46:08 +07:00
hathach
c4f11dfd32 flash target update bootloader setting to skip crc checksum 2018-06-27 15:22:44 +07:00
hathach
8fbe1d73e9 clean up makefile 2018-06-27 15:13:20 +07:00
hathach
4920cc47ca move dfu-gen dfu-flash dfu-bootloader bootloader uf2 target to common Makefile since several board use it 2018-06-27 14:31:08 +07:00
hathach
bed7310fd7 update bin files 2018-06-27 14:13:18 +07:00
hathach
ecd3993d43 update pin map for feather52840 2018-06-27 14:06:15 +07:00
hathach
8d065fe0e6 update reamde 2018-06-26 00:16:58 +07:00
hathach
54547683f9 add uf2, bootloader target 2018-06-25 23:31:14 +07:00
hathach
4722371be9 update bootloader hex with uf2 2018-06-25 23:27:00 +07:00
hathach
f5be5ed6ee Merge branch 'master' into nrf52840_usbboot 2018-06-25 17:12:24 +07:00
arturo182
596a1d8843 nrf: Rename feather52 to feather52832 in readme files 2018-06-22 10:04:39 +02:00
arturo182
25e71a56d4 nrf: Update the PCA10056 example to use new pin naming 2018-06-20 23:39:36 +02:00
arturo182
c2d4d0a10b nrf: Simplify pin generation and definition 
This commit cleans up the pin generation code, all the pins and their
AF (only ADC, for now) are specified in nrf52_af.csv and board use their
own csv file to specify which pins are available on that board and if
they have any special names.
 2018-06-20 23:26:32 +02:00
arturo182
ff918556cd nrf: Simplify the board makefiles 
With the only difference between a SD and non-SD build is the linker
file, there's no need to have two separate .mk per board files,
just use a conditional.
 2018-06-20 21:21:45 +02:00
arturo182
5509f394dc nrf: Add a nrfx submodule and prepare for using the new drivers 2018-06-20 20:43:59 +02:00
arturo182
b47a67d566 nrf: Remove machine, pyb and utime modules 
Micropython legacy, keeping it consistent with atsam port.
 2018-06-20 18:21:18 +02:00
hathach
61437106e7 update bootloader for feather nrf52840 2018-06-19 15:27:07 +07:00
hathach
6d2702ed98 Merge branch 'master' into nrf52840_usbboot 2018-06-19 14:50:17 +07:00
Scott Shawcroft
4e7eee3553
Merge pull request #946 from arturo182/nrf_sd6 
nrf: Use the production version of s140 6.0.0
 2018-06-18 16:29:41 -07:00
arturo182
feee808955 nrf: Use the production version of s140 6.0.0 2018-06-18 23:12:28 +02:00
Scott Shawcroft
05547b72ac Switch to Feather52s full name to avoid confusion with the nrf52840 later. 
Fixes #940
 2018-06-18 10:51:04 -07:00
hathach
35d38dbfed update nrf52840 bootloader hex 2018-06-13 17:27:55 +07:00
hathach
418e28c7dc update nrf52840 bootloader hex and target 2018-06-08 16:10:49 +07:00
hathach
2b3436e87c add feather nrf52 uart rts, cts support 2018-06-08 15:59:38 +07:00
hathach
c10899d13f allow to flash feather52 and feather52840 with jlink 
add crc bypass magic to bootloader settting
 2018-06-08 15:11:17 +07:00
hathach
6d4a2f5524 Merge branch 'master' into usbboot 2018-05-17 15:23:45 +07:00
hathach
52ebfd07a5 update nrfutil to 0.5.2d with singlebank option 2018-05-17 15:20:07 +07:00
hathach
53593d1315 fix #809 
define CIRCUITPY_BOOT_OUTPUT_FILE will cause mp_hal_stdout_tx_strn() to
invoke before serial_init() is called. Solution is skipped output to
serial if it is not inited.
 2018-05-15 18:40:49 +07:00
hathach
05f36ebeb1 update the bootloader hex for feather52840 2018-05-15 16:06:03 +07:00
Kevin Townsend
d0e00d7fbe
Added built to example 2018-04-23 20:01:53 +02:00
Kevin Townsend
0de8697315
Added note on USB CDC bootloader 2018-04-23 19:58:29 +02:00
hathach
ce9f05f91b add missing files 2018-04-24 00:51:44 +07:00
hathach
50e7a4caa8 add bootloader hex 2018-04-24 00:19:04 +07:00
ladyada
926849d7a8 don't use python nrfutil on windows, it doesnt work :/ tested feather52 makefile on windows/mingw 2018-04-13 14:00:20 -04:00
Kevin Townsend
fce0b0858f Removed leftover build option 2018-02-15 21:46:14 +01:00
Kevin Townsend
10497d1db0 Update for style consistency 2018-02-15 21:44:05 +01:00
Kevin Townsend
6544f4cb5c Cleanup minor typos 2018-02-15 21:42:24 +01:00
Kevin Townsend
da15053e0a Fixed pin P0_00 2018-02-15 21:41:21 +01:00
Kevin Townsend
d4356f9416 Added second 'P0_00' 2018-02-15 17:00:58 +01:00
Kevin Townsend
cd7baed14d Added note nrfutil and flashing 2018-02-15 16:00:34 +01:00
Kevin Townsend
70596b6641 Added note on MSDDisable 2018-02-15 15:51:10 +01:00
hathach
f989db25b5 more bootloader feather52840 update 2018-02-15 21:43:27 +07:00
hathach
2e0edd5a63 Merge branch 'nrf52840' of github.com:microbuilder/circuitpython into nrf52840 2018-02-15 15:19:47 +07:00
hathach
2c9cd38547 update bootloader for feather52840 2018-02-15 15:12:30 +07:00