8af98d0dc9
ambiguized directory paths
2018-03-30 22:44:16 +00:00
a5b60647be
improved arrangement
2018-03-30 22:26:21 +00:00
7c0be04696
verbiage cleanup
2018-03-30 22:21:35 +00:00
c70acab8b3
updated README; added git submodule info
2018-03-30 22:16:36 +00:00
676ed4e199
Merge pull request #724 from tannewt/fix_freetouch_submodule
...
Remove freetouch files that were accidentally checked in and
2018-03-28 14:24:32 -07:00
19b0b414e6
Remove freetouch files that were accidentally checked in and
...
readd the submodule.
2018-03-28 14:04:53 -07:00
abec199c19
Enable high-quality float hash
...
This appears to have a relatively small impact on flash usage but
fixes some pathological slow behavior putting floats in dicts or sets.
Closes : #704
2018-03-27 21:56:30 -05:00
4c2f729a7a
Merge pull request #713 from jepler/lto-type-diagnostic-bis
...
Allow building on gcc 5.4, while preserving ability to build with 7.2
2018-03-27 09:28:41 -04:00
77938db8c8
Merge pull request #719 from tannewt/fix_i2c_hang
...
Fix I2C init hang when the SCL pin is pulled low.
2018-03-26 20:08:14 -04:00
4190aa2eed
Merge pull request #715 from jepler/array-operation-restrictions-bis
...
Remove 'O', 'P' support in arrays
2018-03-26 20:01:34 -04:00
cebcec5e63
Check for floating pins by pulling them low briefly before testing their values.
2018-03-26 16:32:16 -07:00
355bf8b553
Conditionally compile out nonstandard array/struct typecodes
...
.. defaulting to off for circuitpython-supported boards, on for others.
.. fixing up the tests that fail when it is turned off, so that they skip
instead of failing
2018-03-26 18:13:49 -05:00
25ba8ee489
Add an s because grammar.
2018-03-26 15:21:08 -07:00
37538fc0e7
Fix I2C init hang when the SCL pin is pulled low.
...
We added a check to make sure the pins are in a high state before
initing the bus. This leads to a friendly error message when someone
forgets to add the pull up resistors to their circuit.
2018-03-26 15:13:52 -07:00
ea39f4378e
Merge pull request #698 from sommersoft/repl_fix
...
Fix 128 Character Max Paste Into REPL
2018-03-26 13:02:43 -07:00
9bd55cf4c7
minor cleanup
2018-03-26 08:14:37 -05:00
23009fdd63
future-proof for buffer size changes
2018-03-26 06:25:04 +00:00
8b6aeb9e19
Merge pull request #702 from jepler/issue689bis
...
correct typo in filename
2018-03-25 23:58:00 -04:00
d57397f9c8
Remove an unneeded -Wno-error=lto-type-mismtach
2018-03-25 22:04:15 -05:00
c0029e1d97
Don't lose half of the processor's serial number
...
Before this change, `microcontroller.cpu.uid` returned values
where the top 4 bits of each byte were zero, because of
an incorrect bitmask used in this function.
2018-03-25 13:01:04 -05:00
d80e54458d
correct typo in filename
2018-03-24 10:44:24 -05:00
ef16109c5d
updated with requested changes
2018-03-24 00:55:48 +00:00
f237657e5e
extended buffer check to usb_cdc_background
2018-03-23 18:41:27 +00:00
63d826a52a
Update USB PID
2018-03-23 09:34:02 -07:00
ccbe557e30
removed leftover debugging bits
2018-03-23 15:45:30 +00:00
d434635822
add buffer check before triggering new usb read
2018-03-23 15:07:02 +00:00
fd7dcff4e9
Add Feather M4 Express support.
...
* Also fixed detection of SPI flash chip to correct look in the 2+
spots.
* Added support for using QSPI in dual read mode.
2018-03-23 00:00:13 -07:00
06b4c83f59
Add reminder to remove Saleae when going fast.
2018-03-22 17:44:44 -07:00
3bf4d69f67
Update Metro M4 to rev F and make flash reset on start.
2018-03-22 16:42:47 -07:00
a7e3c74fed
Autocreate files that prevent MacOS indexing of the CIRCUITPYTHON dive
...
.. the price of this appears to be about 112 bytes of flash and 12
bytes of RAM, according to the stats printed during the build.
It also uses up 4 directory entries (out of 128), but does not reduce
the number of blocks usable for storing file contents.
These are the same items noted in the Adafruit README for Trinket M0
as preventing MacOS indexing.
Closes : #689
2018-03-22 08:07:32 -05:00
9ab39eb2d2
Merge pull request #688 from jepler/atsamd-build-reqs
...
Better document build requirements and steps
2018-03-20 10:03:01 -07:00
0f90f35606
Merge pull request #685 from jepler/uart-diagnostic
...
UART: Fix maybe-uninitialized diagnostic
2018-03-20 09:59:31 -07:00
3f82fe8da9
README.rst: document mpy-cross gotcha
...
This was biting me, leading to an odd error later on.
2018-03-20 07:53:30 -05:00
fa491b4c32
README.rst: spell out gcc version requirements
...
.. the text was adapted from ports/stm32 and a conversation with
Dan Halbert.
2018-03-20 07:53:30 -05:00
dddfad6594
UART: Fix maybe-uninitialized diagnostic
...
The following error occurs when building with gcc 5.4.1 (debian stretch):
common-hal/busio/UART.c:104:83: error: 'sercom_index' may be used uninitialized in this function [-Werror=maybe-uninitialized]
sercom_insts[rx->sercom[j].index]->USART.CTRLA.bit.ENABLE == 0) ||
It may be related to the addition of rx-only UARTs; gcc is unable
to infer the intended relationship between have_tx and sercom_index
being set (I am still not entirely confident of it myself)
2018-03-19 20:40:04 -05:00
05e2a7d1ac
Added digital pin assignments
2018-03-15 20:28:09 -04:00
04b4026666
fix dotstar for Gemma_M0 in CP3.0
...
Uncomment lines in mpconfigport.h for gemma_m0 to allow dotstar access. same issue as #514 for trinket_m0
2018-03-14 21:28:56 -04:00
f173d45941
Merge pull request #678 from tannewt/m0_no_timer_fix
...
Correct NO_TIMER index value for SAMD21.
2018-03-14 15:04:39 -04:00
88aa0e2660
Remove SERCOM pointers from pin data structure because index is
...
enough.
This saves 380 bytes on the Arduino Zero build. (More pins ==
more savings.)
2018-03-14 11:14:32 -07:00
7a3f86d184
Check usb_busy up front in usb background function.
...
Waiting to do so risks accidentally queueing another response.
Hopefully fixes #655 but we'll let @jerryneedell confirm.
2018-03-14 10:32:41 -07:00
c37ade9aeb
Correct NO_TIMER index value for SAMD21.
...
We check validity by ensuring it's lower than the total number of
timers. 0 is a terrible number for the NO_TIMER value because its
valid even though it shouldn't be.
Fixes https://github.com/adafruit/Adafruit_CircuitPython_SimpleIO/issues/29
2018-03-13 12:44:00 -07:00
b64d568267
Merge pull request #677 from tannewt/usb_active_read
...
Move usb read finish into interrupt.
2018-03-13 15:16:40 -04:00
8157248189
Move usb read finish into interrupt.
...
Having the `active_read = false` in the background function left
a chance that a new_write occurs before active_read is set to false.
In that case, we'll read the appropriate data rather than write it
and never clear the active write.
Hopefully fixes #655 .
2018-03-13 11:29:29 -07:00
945f2f5aa1
line 172 has a typo correct 2MB to 4MB
2018-03-13 13:42:29 -04:00
81ab2526e4
gamepad: Enable the gamepad module for express boards in 3.x
2018-03-11 13:39:54 +01:00
e7fc0b6aa7
Use DMA for long SPI transactions including those to the SPI Flash.
...
QSPI is not currently working so its commented out.
This is progress on #652 .
2018-03-09 12:45:46 -08:00
942b7ffbe0
fixes hardware dotstar support for 3.0 and addresses issue #514
2018-03-08 20:39:47 -08:00
01aceaae50
Support all boards and remove erase and page sizes because they never change.
2018-03-01 12:45:12 -08:00
2ab923862b
Structify flash device definitions.
2018-02-28 19:15:54 -08:00
568c04e6af
Merge pull request #650 from tannewt/merge_2x
...
Merge in commits from 2.x branch.
2018-02-27 22:03:52 -05:00
sommersoft
Scott Shawcroft
Scott Shawcroft
Jeff Epler
Dan Halbert
Kattni
sommersoft
jerryneedell
vesperk38
Radomir Dopieralski
Bryan Siepert