1b00d94b23
Fix second shared PWM
...
Fixes #4210
2021-02-25 14:49:09 -08:00
80f7972f72
Update RP2040 Feather pinout for production rev
2021-02-25 14:46:08 -08:00
22276710e6
rp2pio: Fix writing where the stride was 2 or 4
...
The wrong stride value was being checked.
2021-02-25 15:50:49 -06:00
a7a4f93ff8
Updated build configs to turn off BITMAPTOOLS for smaller builds
2021-02-25 15:44:32 -06:00
94d7bfb1c9
Merge pull request #4264 from UnexpectedCircuitPython/main
...
Expanded pin names for TinyS2 + FeatherS2 pin additions for DAC1 & DAC2
2021-02-25 15:13:18 -05:00
199a8ce8b0
change DigitalInOut direction only when necessary; strong drive strength
2021-02-25 14:10:19 -05:00
f8eb5bc275
Cleanup PIOs and State Machines on soft reset
2021-02-25 12:38:43 -06:00
8170e26a86
more uart improvements
...
- address suggested changes
- refine uart instance availibility checks
- improve pin validation and rx buffer handling
2021-02-25 23:46:00 +05:30
bbe0602738
Merge pull request #4245 from kamtom480/spresense_usb_speed
...
spresense: Pass the correct USB bus speed after restart
2021-02-25 11:02:33 -05:00
fb32e0a7fd
qtpy_m0_haxpress: Change config to make it fit.
2021-02-25 09:44:33 +01:00
69b10d7925
Added DAC1 & DAC2 pin names for FeatherS2
...
Expanded pin names for TinyS2 and added some new ones for functionality I forgot to add pin names for
Cleaned up mpconfigboard
2021-02-25 17:32:34 +11:00
86e60f5f35
Clean up formatting
2021-02-24 17:26:35 -06:00
17ff5dcc99
Return NotImplementedError for PulseOut
2021-02-24 17:04:05 -06:00
8e15f36baa
pulseio (pulsein) for RP2040
2021-02-24 16:58:29 -06:00
5d7fdafcde
implement suggested changes
...
- add internal buffering
- rtc initialization fix
2021-02-25 00:48:36 +05:30
e369473794
spresense: change RX and TX buffer size for CDC
2021-02-24 18:19:18 +01:00
b935dcafdc
Merge branch 'main' into rp2040_countio
2021-02-23 19:46:41 -06:00
379f454ce6
Adding countio to rp2040
2021-02-23 19:38:05 -06:00
abbbb91fa8
Add state machine divisor check
...
This causes an exception when setting a state machine too slow or
too fast.
Fixes #4222
2021-02-23 16:30:46 -08:00
360475e266
Implement audiobusio and enhance PIO for it
...
This adds I2SOut and PDMIn support via PIO.
StateMachines can now:
* read and read while writing
* transfer in 1, 2 or 4 byte increments
* init pins based on expected defaults automatically
* be stopped and restarted
* rxfifo can be cleared and rxstalls detected (good for tracking when
the reading code isn't keeping up)
Fixes #4162
2021-02-23 15:50:00 -08:00
e41137c745
Merge pull request #4244 from UnexpectedCircuitPython/main
...
Added Unexpected Maker TinyS2 board definition
2021-02-23 10:40:06 -08:00
001d7299b2
Merge pull request #4228 from ZodiusInfuser/rp2040-boards
...
Added definitions for Pimoroni RP2040-based boards
2021-02-23 10:00:19 -08:00
1a0bf4c33f
Added flash size for PicoSystem
2021-02-23 11:04:20 +00:00
a9951c9b6c
Added flash size for Keybow2040
2021-02-23 11:01:40 +00:00
ca9b7debe0
Added flash size for Tiny2040
2021-02-23 10:43:35 +00:00
78b2daa2a7
Added Unexpected Maker TinyS2 board definition
2021-02-23 17:55:17 +11:00
a30d4ad25d
set SUPEROPT_VM = 0 on most non-Express SAMD21 boards
2021-02-22 23:03:11 -05:00
3fdf29e773
More parens
2021-02-22 18:35:09 -08:00
863981a5b8
Parens
2021-02-22 18:31:45 -08:00
0aafeac209
Board specific flash sizes for RP2040
...
Stop-gap solution for #4041 . Comment is there to provide info
needed in the future. (We currently run the generic "safe" settings.)
2021-02-22 17:19:18 -08:00
8470f0fdb7
SAMD21: one endpoint pair for MSC now instead of two
2021-02-21 12:37:59 -05:00
cf3217e6d4
Merge pull request #4232 from TG-Techie/fix_tg_watch
...
fix TG-Watch ble issue
2021-02-20 18:10:52 -05:00
a9a2145238
fix TG-Watch ble issue
2021-02-20 15:46:33 -05:00
52f2fd6d53
Removed trailing white space
2021-02-20 17:25:26 +00:00
417173b752
Removed trailing white space
2021-02-20 17:24:26 +00:00
9a4b8c5ed9
Removed trailing white space
2021-02-20 17:23:23 +00:00
dea498a51f
Added new line
2021-02-20 17:20:28 +00:00
9fbeb0baea
Added new line
2021-02-20 17:20:06 +00:00
03577ec81c
Added new line
2021-02-20 17:19:45 +00:00
dac81ea545
Added new line
2021-02-20 17:19:31 +00:00
0a00f91979
Added new line
2021-02-20 17:15:42 +00:00
f1df07002f
Added new line
2021-02-20 17:15:20 +00:00
27bc5492f5
Added other files for PicoSystem
2021-02-20 13:37:08 +00:00
e9c7af1dee
Added board.c for PicoSystem
2021-02-20 13:36:46 +00:00
fb7cce6503
Added other files for Keybow2040
2021-02-20 13:35:27 +00:00
7ac20bfb8b
Added board.c for Keybow2040
2021-02-20 13:35:06 +00:00
66dd74cd12
Added other files for Tiny2040
2021-02-20 13:33:54 +00:00
ad8916499d
Added board.c for Tiny2040
2021-02-20 13:32:54 +00:00
985e020936
shrink simmel build
2021-02-19 18:41:27 -05:00
67406488d1
merge from upstream; re-alphabetize
2021-02-19 14:22:50 -05:00
ee5a48fece
Delete pimoroni_tiny2040
2021-02-19 18:30:29 +00:00
db102ab1ad
Create pimoroni_tiny2040
2021-02-19 18:29:57 +00:00
b12ccefbe6
uart implementation for rp2040
2021-02-19 18:36:00 +05:30
1cd4e4552e
Merge pull request #4219 from jepler/bit_transpose
...
Add Bit transpose function to support piopixl8
2021-02-18 20:29:05 -06:00
7fd4567893
bitops: rename from _bit_transpose, describe the algorithm
2021-02-18 15:41:23 -06:00
0ecb24c3e5
Merge pull request #4169 from hierophect/stm32-i2cstart
...
STM32: Fix I2C repeated start by converting to IT mode
2021-02-18 15:19:00 -05:00
e344c6d684
fix some builds
2021-02-18 14:24:58 -05:00
53a002a096
Initial fix, but bitbangio timing may be off
2021-02-18 13:14:51 -05:00
9cf7d73c6c
core: add bit_transpose function
...
.. this version can only handle exactly 8 bits "across". The restriction
may be relaxed in a future revision.
2021-02-18 11:32:47 -06:00
5c37b73c6d
fix typo to fix nrf builds
2021-02-18 11:09:32 -05:00
696d212dc7
fix nvm rewrite
2021-02-18 18:42:00 +05:30
ab5eb86118
raspberrypi: implement os.urandom
...
Since the datasheet cast some doubt on the strength of the "rosc_hw->randombit",
I use the SHA256 hash function to create a high quality random seed
from random values of uncertain entropy, as well as to generate a sequence
of random values from that seed using SHA256 as a cryptographically-secure
random number generator.
In practice, it produces over 100kB/s of random data which does not
have any gross problems according to _PractRand_.
2021-02-17 17:49:25 -06:00
261b077209
Merge pull request #4192 from dhalbert/pico-pwmout-top-fix-4189
...
RP2040: fix off-by-one PWM top issue
2021-02-16 17:38:09 -08:00
c26de0136a
works! no timeouts
2021-02-16 17:39:36 -05:00
0b8f1b9a90
wip: usb_cdc.serials
2021-02-15 20:06:18 -05:00
93d788543c
Merge remote-tracking branch 'adafruit/main' into secondary-cdc
2021-02-15 20:03:53 -05:00
6d5ffc677b
is_free should not check never_reset
2021-02-15 10:29:05 -05:00
0ec99b37e0
handle 100% duty cycle; improve actual_frequency calc
2021-02-13 13:16:49 -05:00
d54b5861a3
wip
2021-02-12 19:01:14 -05:00
3e4328140c
fix off-by-one PWM top issue
2021-02-12 15:53:31 -05:00
ff1942cff6
Enable protomatter on RP2040 builds
...
Also found a race condition between timer_disable and redraw, which
would happen if I debugger-paused inside common_hal_rgbmatrix_timer_disable
or put a delay or print inside it. That's what pausing inside reconstruct
fixes.
So that the "right timer" can be chosen, `timer_allocate` now gets the `self`
pointer. It's guaranteed at this point that the pin information is accurate,
so you can e.g., find a PWM unit related to the pins themselves.
This required touching each port to add the parameter even though it's
unused everywhere but raspberrypi.
2021-02-12 08:25:15 -06:00
f2d7a5f1e1
Merge branch 'main' into nvm-rp
2021-02-12 18:36:54 +05:30
527b11f99e
implement suggested changes
...
- update FLASH_FIRMWARE length
- use linker script define value
2021-02-12 18:28:48 +05:30
08f30fedf5
Merge pull request #4188 from ladyada/main
...
QT Py with RP2040
2021-02-11 22:19:56 -05:00
6c914b8722
QT Py with RP2040
2021-02-11 19:21:42 -05:00
f0564b4986
merge from upstream; complicated webusb merge
2021-02-11 18:50:02 -05:00
edb7f2d807
Free up space for JA build
2021-02-11 16:30:27 -05:00
a061768ceb
Merge remote-tracking branch 'upstream/main' into stm32-i2cstart
2021-02-11 16:19:12 -05:00
aae10fb37f
Merge pull request #4167 from tannewt/rp2040_audiopwmio
...
Add PWM based audio playback
2021-02-11 12:19:57 -08:00
205837c47b
nvm implementation for rp2040
2021-02-11 12:48:36 +05:30
d00bee2149
Fix I2C Repeated start error by converting to IT mode
2021-02-10 14:59:19 -05:00
f6603aa566
Merge pull request #4168 from BHDynamics/main
...
Add DynaLoRa-USB Dongle
2021-02-10 11:03:16 -08:00
983c75fb24
Add more pin names
2021-02-10 12:19:50 +01:00
191b143e7b
Add PWM based audio playback
...
See
https://learn.adafruit.com/circuitpython-essentials/circuitpython-audio-out
to get started.
Fixes #4037
2021-02-09 15:38:33 -08:00
b19c700d4a
Merge pull request #4165 from DavePutz/issue_4143
...
Issue 4143 - Fixed marking a PWM slice incorrectly as variable frequency
2021-02-09 14:30:39 -08:00
9a28f0bf45
Fix check for variable PWM frequency
2021-02-09 15:22:59 -06:00
5ba28e9861
Merge pull request #4159 from dhalbert/disable-brownout-before-deep-sleep-4025
...
turn off brownout before deep sleep
2021-02-09 09:03:33 -05:00
6efd87b3c6
Merge pull request #4124 from m4tk/main
...
Add display init code for Lilygo TTGO T8 ESP32-S2
2021-02-08 16:35:27 -08:00
0ceac79dfb
Merge pull request #4048 from janderit/fix_3763_mimxrt10xx_spi
...
fixes: busio, SPI OS error 5 for mimxrt10xx
2021-02-08 16:29:48 -08:00
3c99b09993
Merge pull request #4160 from gamblor21/rp2040_neopixel_pin_fix
...
RP2040 Set the neopixel pin as output after PIO use
2021-02-08 17:57:30 -05:00
3a68ac8abb
Merge pull request #3536 from pewpew-game/pew-get-ticks
...
Fix #3504 : Don't use time module in pew.tick()
2021-02-08 17:50:44 -05:00
b0ed258302
Merge pull request #4155 from jepler/rpi-pio-background
...
rp2pio: Transfer up to 32 bytes before checking background tasks
2021-02-08 16:34:16 -05:00
f171660870
Merge pull request #4139 from hierophect/socket-accept-conn
...
Socket: Connect accepted sockets
2021-02-08 16:25:31 -05:00
be500fd15c
Merge pull request #4136 from hierophect/socket-portmax
...
Socket: fix inconsistencies in argument types
2021-02-08 16:23:20 -05:00
c8cf1258ac
Merge pull request #4154 from LuminousOwl/fix-max-pio-instructions
...
Fix maximum PIO instructions
2021-02-08 16:21:49 -05:00
386b49c3e1
Set the pin as output after PIO use
2021-02-08 15:13:37 -06:00
c3a1bd8f13
turn off brownout before deep sleep
2021-02-08 12:40:20 -05:00
1043d619fd
Merge pull request #4148 from Neradoc/fix-recv_into
...
Fix socket.recv_into receiving one less byte than expected
2021-02-08 11:29:41 -05:00
1b7f3d11e7
wip
2021-02-08 10:57:41 -05:00
5423e4966c
rp2pio: Transfer up to 32 bytes before checking background tasks
...
@Jerryneedell noticed that this problem affected strips short enough
to not use the DMA peripheral, thanks for the hot tip!
Instead of checking for background tasks after every byte transfer,
try up to 32 transfers before attending to background tasks.
This fixes the problem I was seeing on my 5-pixel circuit.
Closes #4135 .
2021-02-08 08:35:07 -06:00
5bf08c503b
adds: maximum retries on SPI busy
2021-02-07 17:06:46 +01:00
ae91b12aea
chore: whitespace fixed
2021-02-07 16:59:11 +01:00
127cc6204a
adds: idle loop to wait for SPI not busy (mimxrt10xx)
2021-02-07 16:59:11 +01:00
6be2466d6f
ESP32S2: Socket.recv_into only took len-1 bytes
2021-02-07 08:57:19 +01:00
ae262cde55
Fix maximum PIO instructions
2021-02-06 10:54:25 -05:00
22dc7d5359
Update to the very latest SDK w/GP15 restore
...
Also adds unique id support
Fixes #4039 and hopefully #4107
2021-02-05 18:44:06 -08:00
582bc59d39
Connect accepted sockets
2021-02-05 17:32:15 -05:00
c6a7b00030
Merge pull request #4137 from ferret-guy/smps-mode-pin-rpi-pico
...
Add SMPS mode pin to Raspi Pico pins.c
2021-02-05 12:12:55 -08:00
e7438c481e
Merge pull request #4125 from xorbit/main
...
Add A3 pin to Raspberry Pi Pico
2021-02-05 12:08:35 -08:00
a310d4336b
Merge pull request #4128 from hierophect/esp32s2-i2s-claimpin
...
ESP32S2: Add I2S pin claiming
2021-02-05 11:47:49 -08:00
8214d67e5f
Fix LWIP connect error report
2021-02-05 13:14:49 -05:00
1292c35d59
Add SMPS mode pin to Raspi Pico pins.c
...
Add SMPS mode pin to Raspi Pico pins.c; see section "4.3. Using the ADC" of the Pico datasheet for discussion.
Driving this pin high forces the onboard regulator into a lower noise PWM mode.
2021-02-05 11:09:40 -07:00
a158dde628
Add alternate name `VOLTAGE_MONITOR` for `A3`
2021-02-05 10:55:03 -07:00
4d26ffb447
Make timeout core types consistent
2021-02-05 12:32:41 -05:00
5bb722b927
Merge pull request #4122 from hathach/fix-3986
...
Fix 3986 background reset remove existing usb callback
2021-02-05 09:13:28 -05:00
0a55cfbde8
Merge pull request #4126 from FiriaCTO/webusb
...
WebUSB serial support (compile-time option, currently defaulted to OFF)
2021-02-05 09:11:43 -05:00
70e15d61b2
ports/atmel-samd/boards/dynalora_usb/board.c
2021-02-05 13:24:59 +01:00
54bd79a51a
LCD_MISO is not connected on board
2021-02-05 07:52:01 +01:00
25d456a5b8
shrink a couple of builds
2021-02-04 22:15:32 -05:00
0802b22ed6
usb descriptors all set; rework of enabling for USB devices
2021-02-04 19:23:40 -05:00
210d0f8798
Add I2S pin claiming
2021-02-04 16:30:05 -05:00
6e153d9948
raspberrypi: implement reset, reset_to_bootloader
...
This makes all the following work:
* normal microcontroller.reset()
* reset into safe mode or UF2 bootloader via microcontroller.on_next_reset()
* reset into UF2 bootloader via the "1200 baud trick"
The implementation of reset_cpu is from micropython.
2021-02-04 12:07:50 -06:00
d357a05870
Add A3 pin to Raspberry Pi Pico
...
We want to be able to use this to measure VSYS.
2021-02-04 10:44:37 -07:00
ff7b296b04
Add display init code for Lilygo TTGO T8 ESP32-S2
2021-02-04 16:46:15 +01:00
215a56c920
Merge branch 'main' into webusb (trying to get CI back online)
2021-02-03 16:48:28 -06:00
4eb396806c
Updated trinket_m0 make file to squeeze all translations as per Dan Halbert.
2021-02-03 11:47:56 +07:00
2656c84b01
Initial commit. Edited error messages in .c files
2021-02-03 05:49:40 +07:00
9140bfb5b2
Merge pull request #4049 from hierophect/sslsocket
...
Separate SSLSocket from Socket
2021-02-02 10:35:07 -08:00
8789a2c8a9
Merge pull request #4110 from microDev1/rtc-rp
...
RP2040: Support for RTC
2021-02-01 19:47:44 -08:00
ced3dc70ff
Merge pull request #4018 from iot49/cp-flow
...
add uart hardware flow control to nrf port
2021-02-01 19:38:16 -08:00
e79283932d
Moving control of USB compile-time options down to the BOARD level
2021-02-01 19:08:56 -06:00
e1618c21b2
Default WebUSB to OFF because other ports are not ready for it yet
2021-02-01 17:56:38 -06:00
ec03267035
rtc implementation for rp2040
2021-02-02 00:00:00 +05:30
459f323247
Merge pull request #4087 from DavePutz/cpu_temp_doc
...
Fixing microcontroller.cpu on multi-core cpus and adding microcontroller.cpus
2021-02-01 12:50:37 -05:00
745ba01768
shrink simmel
2021-02-01 12:22:35 -05:00
66639b237f
Merge remote-tracking branch 'upstream/main' into sslsocket
2021-02-01 11:43:01 -05:00
8277ffca86
Fix hash, close, error bugs
2021-02-01 11:04:12 -05:00
0c0b517112
Merge pull request #4105 from xorbit/main
...
Add board Silicognition LLC M4-Shim
2021-01-31 20:02:36 -08:00
529114c162
Merge pull request #4077 from netroy/lilygo-ttgo-t8-esp32-s2
...
Add support for Lilygo TTGO T8 ESP32-S2
2021-01-31 19:50:36 -08:00
17cf03c8e4
Merge pull request #4083 from microDev1/watchdog-rp
...
RP2040: Support for WatchDog
2021-01-31 19:45:38 -08:00
a52395a4bb
Merge pull request #4095 from hierophect/socket-timeout
...
Fix default socket timeout
2021-01-31 19:17:12 -08:00
6dba7a146d
Add support for Lilygo TTGO T8 ESP32-S2
2021-01-31 14:30:31 +01:00
0dbd3293a9
Add board Silicognition LLC M4-Shim
2021-01-30 18:35:35 -07:00
ddd516a683
Fix default timeout
2021-01-30 15:44:44 -05:00
34fe152fcf
extend include path
2021-01-30 14:00:14 +05:30
acbf66dacc
Make sys.platform "RP2040" on raspberrypi
...
[#4091 ]
2021-01-29 12:33:37 -08:00
067f42b4f8
Add Gameduino 3X Dazzler support on raspberry_pi_pico
...
Tested with hardware. Looks good.
Follow on from #4054
2021-01-29 12:25:59 -08:00
a724f6f954
Fix documentation builds
2021-01-29 11:58:02 -05:00
63f9b12fe6
Partially hard-coded VENDOR descriptor has been added. First build to be accessed via WebUSB. NOTE - had to disable HID (EndPoint shortage?)
2021-01-28 20:22:31 -06:00
67f128c0cf
Fixing microcontroller.cpu on muti-core cpus and adding microcontroller.cpus
2021-01-28 14:42:39 -06:00
a54b57ea40
watchdog implementation for rp2040
2021-01-28 15:15:15 +05:30
e285b5b98c
Merge remote-tracking branch 'adafruit/main' into cp-flow
2021-01-27 09:22:41 -08:00
16d54586c1
remove long read error message
2021-01-27 09:20:45 -08:00
351a0e747d
Merge pull request #4047 from kmatch98/esp32s2_ParallelBus
...
Add initial ParallelBus support for ESP32-S2
2021-01-26 13:07:58 -08:00
29e672fe86
Merge pull request #4071 from tannewt/rp2040_uart_error
...
Raise an error on UART use
2021-01-26 15:22:02 -05:00
815ab5277b
Fix stubs error, out of sockets error, invalid TLS leak
2021-01-26 14:13:12 -05:00
a9227e15d0
Merge pull request #4063 from dhalbert/rp2040-gp15
2021-01-26 13:38:41 -05:00
13812a788f
Merge pull request #4060 from dhalbert/regularize-extmod-modules
...
CIRCUITPY_* switches for JSON, RE, etc. Doc cleanup
2021-01-26 12:54:21 -05:00
b42e94ee2c
Raise an error on UART use
2021-01-26 08:48:30 -08:00
f154ee855d
shrink simmel
2021-01-26 10:23:37 -05:00
be4cfdd3d6
Use TOTAL_GPIO_COUNT instead of magic number 30
2021-01-25 22:16:24 -05:00
fbfb7b68cc
Most of the code we need has been pulled in from the tinyusb webusb_serial demo. Still LOTS to do regarding descriptors.
2021-01-25 20:37:58 -06:00
61850acd14
Fixed bug in pin error handling, deleted debug prints
2021-01-25 16:51:12 -06:00
a2ac2da7cc
Merge pull request #3936 from gamblor21/busdevice_fixes
...
Changing adafruit_bus_device to duck typing
2021-01-25 14:41:53 -08:00
c075e89258
Merge pull request #4054 from dglaude/patch-1
...
Permit Gameduino 3X Dazzler support on Metro M4 AirLift Lite.
2021-01-25 14:33:00 -08:00
4140012430
Allow pins >= 32, allow write pin on different register than data pins
2021-01-25 16:25:56 -06:00
9f34ec78c4
Separate Socket and SSLSocket, add LWIP connect
2021-01-25 17:07:25 -05:00
0fa5aa359d
Stop treating pin 15 specially.
2021-01-25 16:07:01 -05:00
c5992a3101
spresense: update Spresense SDK to 2.0.2
2021-01-25 18:40:14 +01:00
69c71bd522
fix some build errors
2021-01-25 11:54:10 -05:00
1e97d384ff
add GP15
2021-01-25 11:02:32 -05:00
69869e1439
CIRCUITPY_* switches for JSON, RE, etc. Doc cleanup
2021-01-24 23:10:20 -05:00
abd9f7894d
Permit Gameduino 3X Dazzler support on that board.
...
Totally untested, change request based on change made in #2581 .
It might be my first PR in CircuitPython core...
Maybe this should be confirmed by @jamesbowman
Those are the two boards that seems supported:
* Metro M4 Express
* Metro nRF52840 Express
The only Metro that this PR concern:
* Metro M4 AirLift Lite
Other Metro I found and are maybe not supported:
* Metro ESP32-S2
* Metro M0 Express
* Metro M7 1011
2021-01-24 12:53:06 +01:00
10965e5989
Delete unnecessary comments
2021-01-23 11:30:17 -06:00
dc421a6ca8
squeeze some builds
2021-01-23 06:18:15 -05:00
34aa01c5f9
Remove redundant clear_write, add make translate
2021-01-22 22:29:51 -06:00
de6b05a17b
Fix DigitalInOut.pull on RP2040
...
It used to always return None.
Fixes #4035
2021-01-22 19:00:37 -08:00
811a34fc3d
Add initial ParallelBus support for ESP32-S2
2021-01-22 14:42:09 -06:00
8c49c8df0a
shrink arduino_mkr1300
2021-01-22 11:26:33 -05:00
f50edc2904
Merge pull request #4044 from DavePutz/rp2040_longint
...
RP2040 longint support
2021-01-22 10:30:12 -05:00
f72c1474c5
Merge branch 'main' into connect
2021-01-22 03:56:57 -05:00
e3275be8b1
Merge pull request #3911 from hugodahl/add-translation-for-builtin-object-help
...
Update built-in help output for localization (Issue #3907 )
2021-01-22 03:49:19 -05:00
63b5e56c72
shrink feather_m0_adalogger and gemma_m0
2021-01-21 23:49:49 -05:00
e8e8c593ac
move longint choice to mpconfigport.mk
2021-01-21 22:50:15 -05:00
ea9fe24971
shrink arduino_mkrzero build
2021-01-21 18:02:35 -05:00
f39ca0a1d6
Adding longing support on RP2040
2021-01-21 16:42:16 -06:00
3aab17c98e
Adding longint support on RP2040
2021-01-21 16:40:57 -06:00
f88a896c03
Merge pull request #3854 from hierophect/esp-tcpserver
...
ESP32S2: Implement TCP Server bindings
2021-01-21 17:25:14 -05:00
9b8246f889
shrink sparkfun_samd21_dev de_DE build
2021-01-21 15:56:30 -05:00
1f6cd496c7
1. check enabled before scan; 2. make start-station() the single control point for esp_wifi_set_mode()
2021-01-21 13:54:19 -06:00
b73b30ff9f
Switch to upstream TinyUSB
2021-01-21 11:33:13 -08:00
b47fd08b20
copy editing
2021-01-21 10:17:40 -08:00
b0f7fd933f
type fix
2021-01-20 23:33:00 -08:00
6a6f22b0e6
pre-commit
2021-01-20 23:30:15 -08:00
48721584f9
Temporarily turn off string op overflow check
2021-01-20 19:16:56 -08:00
733094aead
Add initial RP2040 support
...
The RP2040 is new microcontroller from Raspberry Pi that features
two Cortex M0s and eight PIO state machines that are good for
crunching lots of data. It has 264k RAM and a built in UF2
bootloader too.
Datasheet: https://pico.raspberrypi.org/files/rp2040_datasheet.pdf
2021-01-20 19:16:56 -08:00
eff68b0d9f
Merge pull request #4011 from dheera/main
...
prevents going into safe mode for watchdog resets
2021-01-20 11:30:12 -08:00
f1e4960d14
Merge pull request #4019 from mrangen/QSPI-comment-fix
...
Fixed comment in mpconfigboard.h
2021-01-19 18:41:50 -08:00
409b5ff009
Merge pull request #4028 from djix123/stm32411ce_blackpill_haxpress
...
Add support for a 'haxpress' external SPI flash build for stm32f411ce Black Pill board
2021-01-19 13:01:56 -05:00
55c6d3e92f
1. Rename 'stm32f411ce_blackpill_haxpress' to 'stm32f411ce_blackpill_with_flash'
...
2. Add 'W25Q64JV_IQ' to flash chip list (as per commercial version)
2021-01-19 11:48:15 -05:00
Scott Shawcroft
Jeff Epler
Kevin Matocha
Dan Halbert
Dan Halbert
root
microDev
Kamil Tomaszewski
Seon Rozenblum
Mark
gamblor21
Scott Shawcroft
ZodiusInfuser
Jonah Yolles-Murphy
Jeff Epler
Jeff Epler
Lucian Copeland
lady ada
Enrique Casado
Philip Jander
Neradoc
Jason Nichols
Mark Omo
Patrick Van Oosterwijck
m4tk
Kevin Banks
BiffoBear
Aditya
James Bowman
Bernhard Boser
David Glaude
anecdata
Jonathan Giles