b0fca4fcda
feather rp2040: enable default board.UART
2021-03-03 13:13:06 -06:00
b27afad9cb
move LED to the right spot in the file
2021-03-02 19:02:38 -06:00
8bfd308d37
feather rp2040: add board.LED
2021-03-02 13:16:09 -06:00
f560b5f3a3
raspberry: switch pico back to the boot2 for W25Q16
...
Presumably, switching it to generic hurt performance a bit.
I verified that the build-raspberry_pi_pico/boot2_padded_checksummed.S
built file has the same checksum as the old
bs2_default_padded_checksummed.S
2021-03-02 08:08:41 -06:00
af9dfccab1
Update QT Py flash size
2021-03-01 10:34:25 -08:00
dac047db61
Update Feather RP2040 to 8MB
2021-03-01 10:33:04 -08:00
f0432b9d6f
Remove neopixel power
2021-02-25 16:37:34 -08:00
80f7972f72
Update RP2040 Feather pinout for production rev
2021-02-25 14:46:08 -08:00
001d7299b2
Merge pull request #4228 from ZodiusInfuser/rp2040-boards
...
Added definitions for Pimoroni RP2040-based boards
2021-02-23 10:00:19 -08:00
1a0bf4c33f
Added flash size for PicoSystem
2021-02-23 11:04:20 +00:00
a9951c9b6c
Added flash size for Keybow2040
2021-02-23 11:01:40 +00:00
ca9b7debe0
Added flash size for Tiny2040
2021-02-23 10:43:35 +00:00
863981a5b8
Parens
2021-02-22 18:31:45 -08:00
0aafeac209
Board specific flash sizes for RP2040
...
Stop-gap solution for #4041 . Comment is there to provide info
needed in the future. (We currently run the generic "safe" settings.)
2021-02-22 17:19:18 -08:00
52f2fd6d53
Removed trailing white space
2021-02-20 17:25:26 +00:00
417173b752
Removed trailing white space
2021-02-20 17:24:26 +00:00
9a4b8c5ed9
Removed trailing white space
2021-02-20 17:23:23 +00:00
dea498a51f
Added new line
2021-02-20 17:20:28 +00:00
9fbeb0baea
Added new line
2021-02-20 17:20:06 +00:00
03577ec81c
Added new line
2021-02-20 17:19:45 +00:00
dac81ea545
Added new line
2021-02-20 17:19:31 +00:00
0a00f91979
Added new line
2021-02-20 17:15:42 +00:00
f1df07002f
Added new line
2021-02-20 17:15:20 +00:00
27bc5492f5
Added other files for PicoSystem
2021-02-20 13:37:08 +00:00
e9c7af1dee
Added board.c for PicoSystem
2021-02-20 13:36:46 +00:00
fb7cce6503
Added other files for Keybow2040
2021-02-20 13:35:27 +00:00
7ac20bfb8b
Added board.c for Keybow2040
2021-02-20 13:35:06 +00:00
66dd74cd12
Added other files for Tiny2040
2021-02-20 13:33:54 +00:00
ad8916499d
Added board.c for Tiny2040
2021-02-20 13:32:54 +00:00
ee5a48fece
Delete pimoroni_tiny2040
2021-02-19 18:30:29 +00:00
db102ab1ad
Create pimoroni_tiny2040
2021-02-19 18:29:57 +00:00
08f30fedf5
Merge pull request #4188 from ladyada/main
...
QT Py with RP2040
2021-02-11 22:19:56 -05:00
6c914b8722
QT Py with RP2040
2021-02-11 19:21:42 -05:00
c6a7b00030
Merge pull request #4137 from ferret-guy/smps-mode-pin-rpi-pico
...
Add SMPS mode pin to Raspi Pico pins.c
2021-02-05 12:12:55 -08:00
1292c35d59
Add SMPS mode pin to Raspi Pico pins.c
...
Add SMPS mode pin to Raspi Pico pins.c; see section "4.3. Using the ADC" of the Pico datasheet for discussion.
Driving this pin high forces the onboard regulator into a lower noise PWM mode.
2021-02-05 11:09:40 -07:00
a158dde628
Add alternate name `VOLTAGE_MONITOR` for `A3`
2021-02-05 10:55:03 -07:00
d357a05870
Add A3 pin to Raspberry Pi Pico
...
We want to be able to use this to measure VSYS.
2021-02-04 10:44:37 -07:00
067f42b4f8
Add Gameduino 3X Dazzler support on raspberry_pi_pico
...
Tested with hardware. Looks good.
Follow on from #4054
2021-01-29 12:25:59 -08:00
1e97d384ff
add GP15
2021-01-25 11:02:32 -05:00
6a6f22b0e6
pre-commit
2021-01-20 23:30:15 -08:00
733094aead
Add initial RP2040 support
...
The RP2040 is new microcontroller from Raspberry Pi that features
two Cortex M0s and eight PIO state machines that are good for
crunching lots of data. It has 264k RAM and a built in UF2
bootloader too.
Datasheet: https://pico.raspberrypi.org/files/rp2040_datasheet.pdf
2021-01-20 19:16:56 -08:00
Jeff Epler
Scott Shawcroft
Scott Shawcroft
ZodiusInfuser
Dan Halbert
lady ada
Mark Omo
Patrick Van Oosterwijck
James Bowman
Dan Halbert