djsundog/circuitpython
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
7,452 Commits 21 Branches 274 Tags 785 MiB
974847ac8d
Commit Graph

7452 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
Scott Shawcroft
974847ac8d atmel-samd: Add a safe mode which detects hard faults and reboots without running user code again. 2017-05-15 15:29:04 -07:00
Scott Shawcroft
790c38e18c atmel-samd: Rework boot, main and REPL order. 
Boot will only run once now before USB is started. Its output goes to
boot_out.txt. After main and REPL will run with VM and hardware resets
between each.
 2017-05-12 18:26:14 -07:00
Scott Shawcroft
7672bf7736 atmel-samd: Rename auto-reset to auto-reload to reduce confusion with physical reset buttons. 2017-05-12 16:45:38 -07:00
Scott Shawcroft
e0f931afd3 atmel-samd: Fix pin reset to ensure USB and SWD are not reset. 2017-05-12 16:09:13 -07:00
Scott Shawcroft
e1a6f6d584 atmel-samd: Rework SPI flash defines for clarity. 
Also add sector protection support for the SAMD Xplained board.
 2017-05-12 14:47:39 -07:00
Scott Shawcroft
7ea76e0889 atmel-samd: Pin reset improvements. 
* Reset SWD lines to SWD rather than GPIO. This makes OpenOCD happier.
* Default speaker enable lines to False for CircuitPlayground to prevent
  the speaker from buzzing when no sound is playing. Fixes #126
 2017-05-12 13:14:01 -07:00
Scott Shawcroft
6984425f5d atmel-samd: Correctly wait for the SPI DMA transaction to finish. 2017-05-12 13:13:50 -07:00
Scott Shawcroft
c138d0f025 Merge pull request #128 from ntoll/master 
Rename LEFT_BUTTON -> BUTTON_A, RIGHT_BUTTON -> BUTTON_B.
 2017-05-11 10:04:05 -07:00
Nicholas H.Tollervey
f3152571c6
Rename LEFT_BUTTON -> BUTTON_A, RIGHT_BUTTON -> BUTTON_B. 2017-05-11 14:48:17 +01:00
Scott Shawcroft
ef1a4847b3 shared-bindings: Correct PulseIn.resume to match docs. Fixes #125 2017-05-08 11:14:23 -07:00
Scott Shawcroft
c6d539ace3 atmel-samd: Fix sporadic "syntax errors" 
The GC was deleting memory that was in use because its scan of the
stack missed the very top. Switching to _estack fixes this by relying
on the location from the linker.

Fixes #124
 2017-05-05 12:04:20 -07:00
Scott Shawcroft
5ad426124b atmel-samd: Move heap objects into MICROPY_PORT_ROOT_POINTERS so they don't get garbage collected while we are using them. 2017-05-04 11:57:51 -07:00
Scott Shawcroft
6512ccf32e atmel-samd: Use DMA for user SPI. 
Also replace use of PINMUX_DEFAULT with PINMUX_UNUSED to prevent any
accidental pin changes. This caused user SPI to break internal SPI
flash on the Feather M0 Express.

Fixes #100
 2017-05-03 10:50:29 -07:00
Scott Shawcroft
24a5752f94 atmel-samd: Use DMA for SPI flash block transfers. 
Fixes #99
 2017-05-02 15:25:06 -07:00
Limor "Ladyada" Fried
a2c463deb0 Update AudioOut.c 
fiiiiiiiiiiiiiiiiiiiiiiiiix
 2017-05-01 23:32:37 -04:00
Scott Shawcroft
7187132d24 tools: Switch method of detecting travis so that it works OK on CIs without artifacts saved. 2017-05-01 15:12:52 -07:00
Scott Shawcroft
dd64379c0d py: Fix version header generation when no tags are available. 2017-05-01 15:12:52 -07:00
Scott Shawcroft
58b9789d0c atmel-samd: Introduce audio sample playback via audioio.AudioOut. 2017-05-01 13:10:03 -07:00
Scott Shawcroft
30b8091df0 atmel-samd: Clean up leftovers from QTouch. 2017-05-01 11:32:15 -07:00
Scott Shawcroft
4ad22144b0 atmel-samd: Rename metro M0 Express and add NEOPIXEL pin. 2017-05-01 11:29:51 -07:00
Scott Shawcroft
541d22e8d0 Update the README with new links. 2017-04-25 11:28:47 -07:00
Scott Shawcroft
ef44cec1f1 travis: turn off artifact debug. 2017-04-20 17:02:59 -07:00
Scott Shawcroft
9a5ff7766e travis: working_dir doesn't work as expected. Try and fix it. 2017-04-20 16:48:29 -07:00
Scott Shawcroft
bc152da3a6 atmel-samd: Remove debug prints from TouchIn 2017-04-20 16:48:04 -07:00
Scott Shawcroft
4c77f84034 travis: artifact upload tweaks. 2017-04-20 16:18:30 -07:00
Scott Shawcroft
f66fcbfa4f travis: Don't try and build ESP8266 2017-04-20 15:14:37 -07:00
Scott Shawcroft
bac3a7dcc1 travis: Fix typo 2017-04-20 14:12:14 -07:00
Scott Shawcroft
98667b1af8 Turn on build saving and uf2 creation. 2017-04-20 14:04:06 -07:00
Scott Shawcroft
a9d25bfae4 atmel-samd: Update CircuitPlayground Express pins for Rev G. 2017-04-20 11:25:57 -07:00
Scott Shawcroft
939c0045db Switch to a shared piece of code to compute start and length of a 
buffer from start, end and length. The old code miscomputed length
leading to writing and reading from memory past the end of the buffer.
Consolidating the code should make it easier to get right everywhere.
 2017-04-20 11:24:05 -07:00
Scott Shawcroft
076ff82c46 atmel-samd: Switch to https for freetouch submodule. 2017-04-18 12:34:03 -07:00
Scott Shawcroft
b97edd4465 atmel-samd: Turn on framebuf for Express boards because they have space. 2017-04-18 09:44:04 -07:00
Scott Shawcroft
8d0d5defc7 atmel-samd: Use LTO for all builds to get 5000 bytes back on express boards. 2017-04-18 09:44:04 -07:00
Scott Shawcroft
ca176535a9 esp8266: Fix busio.SPI to take both MOSI and MISO. 2017-04-18 09:44:04 -07:00
Scott Shawcroft
67ec52d7a9 atmel-samd: Swap out pulseio for touchio based on FreeTouch. 2017-04-18 09:44:04 -07:00
Scott Shawcroft
225fdb0307 Merge pull request #118 from dhalbert/master 
atmel-samd: HID report descriptor for mouse had to be COMPILER_WORD_ALIGNED
 2017-04-15 11:05:48 -07:00
Dan Halbert
2fe6b74e90 atmel-samd: HID report descriptor for mouse had to be COMPILER_WORD_ALIGNED. 2017-04-15 10:18:56 -04:00
Scott Shawcroft
b653c3c8fc Correct PulseOut example code 2017-04-13 17:52:13 -07:00
Scott Shawcroft
f37ce1c595 atmel-samd: Turn off PulseIn interrupts on reset. Can hardfault otherwise. 2017-04-13 17:50:06 -07:00
Scott Shawcroft
f0e24bd812 atmel-samd: Account for pending ticks in PulseIn. Fixes #116. 2017-04-13 14:47:34 -07:00
Scott Shawcroft
d1b15cf1a3 esp8266: Don't reset TX and RX lines. The pullup is required for 
the Adafruit Huzzah Breakout because it has a diode to protect
against 5v logic which effectively blocks 1s and relies on the
pull up to produce them.
 2017-04-13 14:15:06 -07:00
Scott Shawcroft
4a4f29b8f9 atmel-samd: Rework status LED implementation 
* Track status pin use by user code separately so it can take over the pins and then give them back.
* Switch to hardware SPI for APA102 on Gemma and Trinket.
* Merge microcontroller/types.h into microcontroller/Pin.h to better match approach going forwards.
 2017-04-12 15:24:50 -07:00
Scott Shawcroft
8505de1ced atmel-samd: rename cplay_m0_flash to circuitplayground_express and update for new rev (F). 2017-04-11 17:59:02 -07:00
Scott Shawcroft
45dfaa835f atmel-samd: Reset PulseIn correctly on soft reset. 2017-04-11 16:56:06 -07:00
Scott Shawcroft
1e8fc15a41 atmel-samd: Fix PulseIn duration math to handle case when current us time is after the last one but more than a ms has passed. 2017-04-11 16:55:42 -07:00
Scott Shawcroft
f28f8ba568 Split up nativeio. 
This was done to allow greatly granularity when deciding what functionality
is built into each board's build. For example, this way pulseio can be
omitted to allow for something else such as touchio.
 2017-04-10 13:32:19 -07:00
Scott Shawcroft
4810722064 esp8266: Change nativeio.I2C to use bitbangio under the hood rather than throwing an error. 2017-03-28 18:54:16 +01:00
Scott Shawcroft
3afa09b2fe atmel-samd: Update Feather M0 Express USB pid. 2017-03-27 20:30:02 +01:00
Scott Shawcroft
f5caf86870 atmel-samd: Add message for when auto reset is off. Fixes #112 2017-03-27 20:12:30 +01:00
Scott Shawcroft
be1ed7aae4 Change to official Feather M0 Express branding. 2017-03-27 19:45:44 +01:00