Dan Halbert
0ab4df6f2f
shrink some SAMD21 builds, and nrf simmel
2021-09-14 17:10:49 -04:00
Scott Shawcroft
3940878695
Shrink builds and handle 0-length writes
2021-07-01 12:49:11 -07:00
Dan Halbert
04b69cde9b
turn off gamepad on most builds;turn off keypad where appropriate
2021-06-17 13:46:45 -04:00
jun2sak
7accb8b173
modify copyright notice.
2021-04-25 19:57:21 +09:00
Jeff Epler
f1ada8e880
Automatically count EXTERNAL_FLASH_DEVICES
2021-03-07 11:48:39 -06:00
Kevin Matocha
a7a4f93ff8
Updated build configs to turn off BITMAPTOOLS for smaller builds
2021-02-25 15:44:32 -06:00
Dan Halbert
985e020936
shrink simmel build
2021-02-19 18:41:27 -05:00
Dan Halbert
745ba01768
shrink simmel
2021-02-01 12:22:35 -05:00
Dan Halbert
f154ee855d
shrink simmel
2021-01-26 10:23:37 -05:00
iot49
1a82555803
Merge branch 'main' into msgpack
2021-01-05 11:19:11 -08:00
Dan Halbert
8f9cd7075e
Merge pull request #3752 from jepler/gcc10
...
build: Update to gcc10
2020-12-17 11:03:40 -05:00
Jeff Epler
bbbd621b18
nrf: simmel: remove some unneeded modules to make it fit
2020-12-15 10:54:37 -06:00
Scott Shawcroft
344d3c59cb
Merge branch 'main' into msgpack
2020-12-11 11:10:30 -08:00
Bernhard Boser
34bbcc4910
exclude nrf/simmel due to lack of flash
2020-12-02 13:05:00 -08:00
gamblor21
fe1c2fa6f0
Removed bus device from simmel build
2020-12-01 19:11:17 -06:00
Dan Halbert
cf0f3d70b5
SPIM3 buffer must be in first 64kB of RAM
2020-08-15 10:31:56 -04:00
root
c937fa1760
fix formatting
2020-07-23 19:29:57 -05:00
root
778e8bfda9
Changes to optimization option
2020-07-23 19:27:02 -05:00
Sean Cross
595f6387c2
watchdog: rename module from wdt and move to microcontroller
...
This also places it under the `microcontroller` object.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-27 11:28:49 +08:00
Sean Cross
fbe1c05832
nrf: simmel: enable wdt support
...
This enables WDT support for Simmel. Other platforms cannot yet use
WDT because it overflows their flash storage.
Enable CIRCUITPY_WDT support for the nrf target.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-27 11:28:48 +08:00
Sean Cross
f7fcd43516
nrf: simmel: disable SPIM3
...
Disable the SPIM3 controller to avoid needing to dedicate 8 kB to
the SPIM3 block.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-12 09:31:51 +08:00
Sean Cross
79c055f958
nrf: simmel: enable aesio
...
This adds AES support to simmel.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-12 09:31:51 +08:00
Sean Cross
b128399d1e
nrf: simmel: enable CIRCUITPY_USB_HID
...
Simmel had USB HID disabled in order to save space. However, the board
configuration did not set USB_DEVICES, causing it to inherit the default
device bouquet of MSC,CDC,MIDI,HID. This in turn caused HID to be included
in the USB Configuration Descriptor.
For some reason, this was not a problem in an earlier version of tinyusb or
circuitpython. However, in the most recent version this has rightfully
caused asserts to appear during configuration.
Re-enable USB_HID for now, as it doesn't add too much in terms of space.
We may disable it again later on if we become pressed for space.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-04 15:37:53 +08:00
Sean Cross
1d0781bf12
nrf: add simmel board
...
This adds support for Simmel, an nRF52833-based bluetooth tracking
board designed to aid in pandemic tracing.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-04-29 11:40:00 +08:00
