Commit Graph

74 Commits

Author SHA1 Message Date
Damien George e920bab976 py/emitinline: Move common code for end of final pass to compiler.
This patch moves some common code from the individual inline assemblers to
the compiler, the code that calls the emit-glue to assign the machine code
to the functions scope.
2016-12-09 21:23:17 +11:00
Damien George dd53b12193 py/emitinline: Move inline-asm align and data methods to compiler.
These are generic methods that don't depend on the architecture and so
can be handled directly by the compiler.
2016-12-09 20:54:54 +11:00
Damien George f76b1bfa9f py: Add inline Xtensa assembler.
This patch adds the MICROPY_EMIT_INLINE_XTENSA option, which, when
enabled, allows the @micropython.asm_xtensa decorator to be used.

The following opcodes are currently supported (ax is a register, a0-a15):

    ret_n()
    callx0(ax)
    j(label)
    jx(ax)

    beqz(ax, label)
    bnez(ax, label)
    mov(ax, ay)
    movi(ax, imm) # imm can be full 32-bit, uses l32r if needed

    and_(ax, ay, az)
    or_(ax, ay, az)
    xor(ax, ay, az)
    add(ax, ay, az)
    sub(ax, ay, az)
    mull(ax, ay, az)

    l8ui(ax, ay, imm)
    l16ui(ax, ay, imm)
    l32i(ax, ay, imm)
    s8i(ax, ay, imm)
    s16i(ax, ay, imm)
    s32i(ax, ay, imm)
    l16si(ax, ay, imm)
    addi(ax, ay, imm)

    ball(ax, ay, label)
    bany(ax, ay, label)
    bbc(ax, ay, label)
    bbs(ax, ay, label)
    beq(ax, ay, label)
    bge(ax, ay, label)
    bgeu(ax, ay, label)
    blt(ax, ay, label)
    bnall(ax, ay, label)
    bne(ax, ay, label)
    bnone(ax, ay, label)

Upon entry to the assembly function the registers a0, a12, a13, a14 are
pushed to the stack and the stack pointer (a1) decreased by 16.  Upon
exit, these registers and the stack pointer are restored, and ret.n is
executed to return to the caller (caller address is in a0).

Note that the ABI for the Xtensa emitters is non-windowing.
2016-12-09 17:07:38 +11:00
Damien George 8e5aced1fd py: Integrate Xtensa assembler into native emitter.
The config option MICROPY_EMIT_XTENSA can now be enabled to target the
Xtensa architecture with @micropython.native and @micropython.viper
decorators.
2016-12-09 16:51:49 +11:00
Damien George c2713592bc py/emit.h: Remove long-obsolete declarations for cpython emitter. 2016-12-09 13:28:25 +11:00
Damien George a5624bf381 py: Combine 3 comprehension emit functions (list/dict/set) into 1.
The 3 kinds of comprehensions are similar enough that merging their emit
functions reduces code size.  Decreases in code size in bytes are:
bare-arm:24, minimal:96, unix(NDEBUG,x86-64):328, stmhal:80, esp8266:76.
2016-09-19 12:23:31 +10:00
Damien George ce8b4e8749 py: Combine continuous block of emit steps into with_cleanup emit call.
Because different emitters need to handle with-cleanup in different ways.
2016-04-07 08:50:38 +01:00
Damien George 8f54c08691 py/inlineasm: Add ability to specify return type of asm_thumb funcs.
Supported return types are: object, bool, int, uint.

For example:

@micropython.asm_thumb
def foo(r0, r1) -> uint:
    add(r0, r0, r1)
2016-01-27 14:27:10 +00:00
Damien George 5d66b427e2 py/emit: Change type of arg of load_const_obj from void* to mp_obj_t. 2015-11-29 14:25:04 +00:00
Damien George 65dc960e3b unix-cpy: Remove unix-cpy. It's no longer needed.
unix-cpy was originally written to get semantic equivalent with CPython
without writing functional tests.  When writing the initial
implementation of uPy it was a long way between lexer and functional
tests, so the half-way test was to make sure that the bytecode was
correct.  The idea was that if the uPy bytecode matched CPython 1-1 then
uPy would be proper Python if the bytecodes acted correctly.  And having
matching bytecode meant that it was less likely to miss some deep
subtlety in the Python semantics that would require an architectural
change later on.

But that is all history and it no longer makes sense to retain the
ability to output CPython bytecode, because:

1. It outputs CPython 3.3 compatible bytecode.  CPython's bytecode
changes from version to version, and seems to have changed quite a bit
in 3.5.  There's no point in changing the bytecode output to match
CPython anymore.

2. uPy and CPy do different optimisations to the bytecode which makes it
harder to match.

3. The bytecode tests are not run.  They were never part of Travis and
are not run locally anymore.

4. The EMIT_CPYTHON option needs a lot of extra source code which adds
heaps of noise, especially in compile.c.

5. Now that there is an extensive test suite (which tests functionality)
there is no need to match the bytecode.  Some very subtle behaviour is
tested with the test suite and passing these tests is a much better
way to stay Python-language compliant, rather than trying to match
CPy bytecode.
2015-08-17 12:51:26 +01:00
Damien George 59fba2d6ea py: Remove mp_load_const_bytes and instead load precreated bytes object.
Previous to this patch each time a bytes object was referenced a new
instance (with the same data) was created.  With this patch a single
bytes object is created in the compiler and is loaded directly at execute
time as a true constant (similar to loading bignum and float objects).
This saves on allocating RAM and means that bytes objects can now be
used when the memory manager is locked (eg in interrupts).

The MP_BC_LOAD_CONST_BYTES bytecode was removed as part of this.

Generated bytecode is slightly larger due to storing a pointer to the
bytes object instead of the qstr identifier.

Code size is reduced by about 60 bytes on Thumb2 architectures.
2015-06-25 14:42:13 +00:00
Damien George c8b60f013b py: Make viper codegen raise proper exception (ViperTypeError) on error.
This fixes a long standing problem that viper code generation gave
terrible error messages, and actually no errors on pyboard where
assertions are disabled.

Now all compile-time errors are raised as proper Python exceptions, and
are of type ViperTypeError.

Addresses issue #940.
2015-04-20 13:29:31 +00:00
Damien George 4112590a60 py, compiler: When just bytecode, make explicit calls instead of table.
When just the bytecode emitter is needed there is no need to have a
dynamic method table for the emitter back-end, and we can instead
directly call the mp_emit_bc_XXX functions.  This gives a significant
reduction in code size and a very slight performance boost for the
compiler.

This patch saves 1160 bytes code on Thumb2 and 972 bytes on x86, when
native emitters are disabled.

Overall savings in code over the last 3 commits are:

bare-arm: 1664 bytes.
minimal:  2136 bytes.
stmhal:    584 bytes (it has native emitter enabled).
cc3200:   1736 bytes.
2015-03-26 16:52:45 +00:00
Damien George a210c774f9 py, compiler: Remove emit_pass1 code, using emit_bc to do its job.
First pass for the compiler is computing the scope (eg if an identifier
is local or not) and originally had an entire table of methods dedicated
to this, most of which did nothing.  With changes from previous commit,
this set of methods can be removed and the methods from the bytecode
emitter used instead, with very little modification -- this is what is
done in this commit.

This factoring has little to no impact on the speed of the compiler
(tested by compiling 3763 Python scripts and timing it).

This factoring reduces code size by about 270-300 bytes on Thumb2 archs,
and 400 bytes on x86.
2015-03-26 16:52:45 +00:00
Damien George 542bd6b4a1 py, compiler: Refactor load/store/delete_id logic to reduce code size.
Saves around 230 bytes on Thumb2 and 750 bytes on x86.
2015-03-26 16:52:45 +00:00
Damien George 9c5cabb502 py: Give error for duplicate label in inline assembler. 2015-03-03 17:08:02 +00:00
Damien George 63f3832e81 py: Combine emit functions for jump true/false to reduce code size.
Saves 116 bytes for stmhal and 56 bytes for cc3200 port.
2015-02-28 15:04:06 +00:00
Damien George 8dfbd2d589 py: Make inline assembler raise proper SyntaxError exception on error.
Also gives line number of location of error.  Very useful!
2015-02-13 01:00:51 +00:00
Damien George 7d414a1b52 py: Parse big-int/float/imag constants directly in parser.
Previous to this patch, a big-int, float or imag constant was interned
(made into a qstr) and then parsed at runtime to create an object each
time it was needed.  This is wasteful in RAM and not efficient.  Now,
these constants are parsed straight away in the parser and turned into
objects.  This allows constants with large numbers of digits (so
addresses issue #1103) and takes us a step closer to #722.
2015-02-08 01:57:40 +00:00
Damien George 0d3cb6726d py: Change vstr so that it doesn't null terminate buffer by default.
This cleans up vstr so that it's a pure "variable buffer", and the user
can decide whether they need to add a terminating null byte.  In most
places where vstr is used, the vstr did not need to be null terminated
and so this patch saves code size, a tiny bit of RAM, and makes vstr
usage more efficient.  When null termination is needed it must be
done explicitly using vstr_null_terminate.
2015-01-28 23:43:01 +00:00
Damien George 0abb5609b0 py: Remove unnecessary id_flags argument from emitter's load_fast.
Saves 24 bytes in bare-arm.
2015-01-16 12:24:49 +00:00
Damien George dab1385177 py: Add load_const_obj to emitter, add LOAD_CONST_OBJ to bytecode.
This allows to directly load a Python object to the Python stack.  See
issue #722 for background.
2015-01-13 15:55:54 +00:00
Damien George 51dfcb4bb7 py: Move to guarded includes, everywhere in py/ core.
Addresses issue #1022.
2015-01-01 20:32:09 +00:00
Paul Sokolovsky 8a8c1fc82f py: Add basic framework for issuing compile/runtime warnings. 2015-01-01 22:09:18 +02:00
Damien George 83204f3406 py: Allow to properly disable builtin slice operation.
This patch makes the MICROPY_PY_BUILTINS_SLICE compile-time option
fully disable the builtin slice operation (when set to 0).  This
includes removing the slice sytanx from the grammar.  Now, enabling
slice costs 4228 bytes on unix x64, and 1816 bytes on stmhal.
2014-12-27 17:33:30 +00:00
Damien George e37dcaafb4 py: Allow to properly disable builtin "set" object.
This patch makes MICROPY_PY_BUILTINS_SET compile-time option fully
disable the builtin set object (when set to 0).  This includes removing
set constructor/comprehension from the grammar, the compiler and the
emitters.  Now, enabling set costs 8168 bytes on unix x64, and 3576
bytes on stmhal.
2014-12-27 17:33:30 +00:00
Paul Sokolovsky 8ab6f90674 py: Move to guarded includes for compile.h and related headers. 2014-12-27 16:12:17 +02:00
Damien George 7ff996c237 py: Convert [u]int to mp_[u]int_t in emit.h and associated .c files.
Towards resolving issue #50.
2014-09-08 23:05:16 +01:00
Damien George c90f59ec3a py: Add support for emitting native x86 machine code. 2014-09-06 23:06:36 +01:00
Fabian Vogt fe3d16e8c2 Basic native ARM emitter 2014-08-27 18:18:50 +02:00
Damien George 2ac4af6946 py: Allow viper to have type annotations.
Viper functions can now be annotated with the type of their arguments
and return value.  Eg:

@micropython.viper
def f(x:int) -> int:
    return x + 1
2014-08-15 16:45:41 +01:00
Damien George 40f3c02682 Rename machine_(u)int_t to mp_(u)int_t.
See discussion in issue #50.
2014-07-03 13:25:24 +01:00
Damien George b601d9574a py: Improvements to native emitter.
Native emitter can now compile try/except blocks using nlr_push/nlr_pop.
It probably only works for 1 level of exception handling.  It doesn't
work on Thumb (only x64).

Native emitter can also handle some additional op codes.

With this patch, 198 tests now pass using "-X emit=native" option to
micropython.
2014-06-30 05:17:25 +01:00
Damien George 25c84643b6 py: Fix break from within a for loop.
Needed to pop the iterator object when breaking out of a for loop.  Need
also to be careful to unwind exception handler before popping iterator.

Addresses issue #635.
2014-05-30 15:20:41 +01:00
Damien George 36db6bcf54 py, compiler: Improve passes; add an extra pass for native emitter. 2014-05-07 17:24:22 +01:00
Damien George 04b9147e15 Add license header to (almost) all files.
Blanket wide to all .c and .h files.  Some files originating from ST are
difficult to deal with (license wise) so it was left out of those.

Also merged modpyb.h, modos.h, modstm.h and modtime.h in stmhal/.
2014-05-03 23:27:38 +01:00
Damien George 968bf34c4c py: Remove unnecessary LOAD_CONST_ID bytecode.
It's the same as LOAD_CONST_STR.
2014-04-27 19:12:05 +01:00
Damien George e5f8a77db6 py: Add 'align' and 'data' meta-instructions to inline assembler. 2014-04-21 13:33:15 +01:00
Damien George 5f6a25fc50 py: Wrap #if's around emitter functions that are used only by emitcpy.
3 emitter functions are needed only for emitcpy, and so we can #if them
out when compiling with emitcpy support.

Also remove unused SETUP_LOOP bytecode.
2014-04-20 18:02:27 +01:00
Damien George 3558f62fb5 py: Making closures now passes pointer to stack, not a tuple for vars.
Closed over variables are now passed on the stack, instead of creating a
tuple and passing that.  This way memory for the closed over variables
can be allocated within the closure object itself.  See issue #510 for
background.
2014-04-20 17:50:40 +01:00
Damien George 729f7b42d6 py: Merge BINARY_OP_SUBSCR and store_subscr (w/ delete) into subscr.
mp_obj_t->subscr now does load/store/delete.
2014-04-17 22:10:53 +01:00
Damien George a26dc50968 py: Improve inline assembler; improve compiler constant folding. 2014-04-12 17:54:52 +01:00
Damien George d66ae18640 py: Simplify stack get/set to become stack adjust in emitters.
Can do this now that the stack size calculation is improved.
2014-04-10 17:28:54 +00:00
Damien George 6f355fd3b9 py: Make labels unsigned ints (converted from int).
Labels should never be negative, and this modified type signature
reflects that.
2014-04-10 14:11:31 +01:00
Damien George 2bf7c09222 py: Properly implement deletion of locals and derefs, and detect errors.
Needed to reinstate 2 delete opcodes, to specifically check that a local
is not deleted twice.
2014-04-09 15:26:46 +01:00
Damien George 922ddd6415 py, compile: Combine have_star_arg, have_dbl_star_arg into star_flags.
Small reduction in ROM, heap and stack usage.
2014-04-09 12:43:17 +01:00
Damien George 882b363564 py: Move to Python 3.4.0 compatibility.
Very little has changed.  In Python 3.4 they removed the opcode
STORE_LOCALS, but in Micro Python we only ever used this for CPython
compatibility, so it was a trivial thing to remove.  It also allowed to
clean up some dead code (eg the 0xdeadbeef in class construction), and
now class builders use 1 less stack word.

Python 3.4.0 introduced the LOAD_CLASSDEREF opcode, which I have not
yet understood.  Still, all tests (apart from bytecode test) still pass.
Bytecode tests needs some more attention, but they are not that
important anymore.
2014-04-02 15:56:31 +01:00
Damien George 3056509e00 py: Rename and reorder parameters in emit_make_function/closure.
In preparation for implementing default keyword arguments.
2014-03-31 11:30:17 +01:00
Damien George d17926db71 Rename rt_* to mp_*.
Mostly just a global search and replace.  Except rt_is_true which
becomes mp_obj_is_true.

Still would like to tidy up some of the names, but this will do for now.
2014-03-30 13:35:08 +01:00
Damien George 2326d52d20 py: Factor out code from runtime.c to emitglue.c. 2014-03-27 23:26:35 +00:00