14fc4a0797
Merge pull request #6898 from dhalbert/espressif-pwmout-reset
...
Espressif pwmout reset fixes
2022-09-14 18:47:05 -04:00
ae64f9fd78
Merge pull request #6899 from BPI-STEAM/CircuitPython-main-BPI-BIT-S2-PR
...
Add BananaPi BPI-Bit-S2 .
2022-09-13 23:02:46 -04:00
6f4cc611ed
Add BananaPi BPI-Bit-S2 .
...
Adds support for the BananaPi BPI-Bit-S2 Boards.
Based on esp32s2 chip.
With 25 ws2812 LEDs, 1 buzzer, 2 photosensitive sensors, 1 thermosensitive sensor,
2 buttons on the front, 1 reset button and 1 boot button on the back.
2022-09-14 10:21:23 +08:00
14adfb16dd
avoid pwmout_reset() workaround by reordering in main(); remove unnecessary never-resets
2022-09-12 21:32:21 -04:00
d0d10179c2
fix logic in pwmout_reset()
2022-09-12 17:03:45 -04:00
c157f1cb39
Cast pin_number to int8_t so that it can be used with switch-case.
2022-09-12 18:56:15 +08:00
0ae015e4d9
Removed whitespaces.
2022-09-12 18:25:27 +08:00
aaa2be1200
Set the default pin state for GPIOs to pull down.
2022-09-12 18:19:33 +08:00
36221bd749
update board microdev_micro_c3
2022-09-11 13:31:38 +05:30
2fbb3090e2
Changed the pins assignment.
2022-09-09 16:50:14 +08:00
58b00467c4
Merge pull request #6878 from dhalbert/weak-board-defs
...
Use MP_WEAK for default board.c routines
2022-09-08 10:47:08 -04:00
4cb69a51d5
Use MP_WEAK for default board.c routines
2022-09-08 07:36:50 -04:00
6c4f352533
Fixed incorrect IO naming for ProS3 and FeatherS3
2022-09-07 19:51:45 +10:00
14498f793d
Merge pull request #6859 from wemos/s3_cpython
...
Add LOLIN S3 ESP32-S3 board.
2022-09-04 13:10:52 -04:00
ca7fb6dede
removal of sda-scl and add "GP" to 40,41
2022-09-04 18:05:50 +03:00
e1891038c8
Forgor the one IO pin and sda-scl
2022-09-04 16:59:56 +03:00
3a18d285a2
Add LOLIN S3 ESP32-S3 board.
2022-09-03 11:06:51 +08:00
8ed6a6135a
Disable camera on boards without psram
2022-08-26 09:27:50 -05:00
528da05f54
Add Waveshare ESP32-S2-Pico-LCD
2022-08-15 16:46:14 +02:00
2f2ccdddbf
pycam rev b pins
2022-08-13 23:41:35 -04:00
df1435ae94
Audit all boards with LED pins defined
...
Add them as MICROPY_HW_LED_STATUS so that we can share reset code
for them. They aren't actually used for the status if another RGB
option is available. (But maybe they should be.)
Fixes #6717
2022-08-11 14:41:20 -07:00
198c8fea11
merge from upstream and fix espressif_esp32s3_eye
2022-08-10 08:43:08 -04:00
02cc6c2aee
Merge remote-tracking branch 'adafruit/main' into remove-autobrightness
2022-08-10 08:35:53 -04:00
41bcd7b260
Remove support for auto-brightness
2022-08-09 22:40:21 -04:00
59b4353282
Merge pull request #6713 from tannewt/exception_filename
...
Add exception filename to title bar
2022-08-09 16:59:12 -07:00
554063a817
Merge branch 'main' into espressif-camera-2
2022-08-09 14:07:14 -07:00
5084de1b73
Merge pull request #6708 from strid3r21/main
...
Added Smart Bee Design Boards
2022-08-09 14:06:11 -07:00
b3b27a1d80
Remove extra leading spaces
2022-08-09 10:45:47 -07:00
556d01a685
Remove extra newline at end of file
2022-08-09 10:44:57 -07:00
ce1273be7a
Pull Feather S2 TFT LED down on reset
2022-08-09 10:42:56 -07:00
ec839d6f90
these items should not have been disabled
2022-08-09 11:42:19 -05:00
f87e34b9ed
add shutter button
2022-08-09 11:42:19 -05:00
10275001ac
enable web workflow on Feather HUZZAH32
2022-08-09 07:26:18 -04:00
15ad24ba62
ran pre-commit.
2022-08-09 04:32:21 -04:00
2cd9222e5e
add includes
2022-08-07 14:32:29 -04:00
029b6b6fbe
add default display
2022-08-07 14:12:40 -04:00
a6eadd6259
Added Bee Motion S3 board
2022-08-07 11:59:43 -04:00
f39058edc4
Added Bee S3 board
2022-08-06 22:22:20 -04:00
1da8065d6b
Merge remote-tracking branch 'origin/main' into espressif-camera-2
2022-08-05 16:38:51 -05:00
3f49d77036
Improve esp32-s3-eye board definition
2022-08-05 13:10:21 -05:00
125b276af0
Get CIRCUITPY FATFS directly.
...
Otherwise, you may actually get a non-root filesystem.
Fixes #6575
2022-08-04 16:06:27 -07:00
861fa9625d
Add the ESP32-EYE aka ESP-EYE
2022-08-04 15:12:12 -05:00
0e26a937cc
Disable camera everywhere it doesn't fit
2022-08-04 15:12:08 -05:00
69949ecb43
update PID for this board
2022-08-04 15:11:56 -05:00
b903a020fd
Enable display on esp32-s3-eye
2022-08-04 15:11:52 -05:00
8d673bdbf5
reserve 1MB of PSRAM for camera framebuffer on esp32s3-eye
...
.. this setting can be overridden with a bigger or smaller value in
CIRCUITPY/.env but 1/8 of PSRAM seems like a good initial value. It's
enough to store a single 800x600 or 640x480 RGB565 frame, or multiple
smaller frames such as 320x240.
2022-08-04 15:11:51 -05:00
5db6db0128
add esp32-camera
...
This uses the esp32-camera code instead of our own homebrewed camera code.
In theory it supports esp32, esp32-s2 and esp32-s3, as long as they have
PSRAM.
This is very basic and doesn't support changing any camera parameters,
including switching resolution or pixelformat.
This is tested on the Kaluga (ESP32-S2) and ESP32-S3-Eye boards.
First, reserve some PSRAM by putting this line in `CIRCUITPY/_env`:
```
CIRCUITPY_RESERVED_PSRAM=524288
```
and hard-reset the board for it to take effect.
Now, the following script will take a very low-resolution jpeg file and print
it in the REPL in escape coded form:
```python
import board
import esp32_camera
c = esp32_camera.Camera(
data_pins=board.CAMERA_DATA,
external_clock_pin=board.CAMERA_XCLK,
pixel_clock_pin=board.CAMERA_PCLK,
vsync_pin=board.CAMERA_VSYNC,
href_pin=board.CAMERA_HREF,
pixel_format=esp32_camera.PixelFormat.JPEG,
i2c=board.I2C(),
external_clock_frequency=20_000_000)
m = c.take()
if m is not None:
print(bytes(m))
```
Then on desktop open a python repl and run something like
```python
>>> with open("my.jpg", "wb") as f: f.write(<BIG PASTE FROM REPL>)
```
and open my.jpg in a viewer.
2022-08-04 15:11:50 -05:00
8e08cc38f8
Add default I2C bus to Kaluga
2022-08-04 15:11:48 -05:00
e0cb8ef17e
Merge pull request #6694 from dhalbert/esp32-no-psram
...
ESP32 no psram support; other ESP32 cleanup
2022-08-04 11:49:39 -07:00
3707b54e3b
Merge pull request #6672 from bill88t/main
...
Add Waveshare ESP32-S2-Pico
2022-08-04 11:09:59 -07:00
202fac59f8
ESP32 fixes for no PSRAM; some cleanup
2022-08-04 13:44:52 -04:00
d4e8c19b49
merge from main
2022-08-04 12:43:23 -04:00
68bb6b9988
ran precommit
2022-08-03 09:14:26 +03:00
efa3e40f90
Add the one obtained from esp
2022-08-03 08:48:28 +03:00
534a482d94
initial HUZZAH32 bring-up, with hacked pins
2022-08-02 21:47:46 -04:00
74e841d835
Read fuses to know what flash and ram pins to never reset
2022-08-02 12:01:42 -07:00
60429f51c7
Add official vid/pid
2022-08-02 09:43:17 +03:00
f0c6a8c49a
Odroid pin defs
2022-08-01 15:52:08 -07:00
9661d3256c
Add more ESP32 boards and enable web workflow
2022-08-01 15:52:08 -07:00
c71cc4e0dd
Add Waveshare ESP32-S2-Pico
2022-07-30 15:35:48 +03:00
d6344812e8
Lots of web workflow, C3 and title bar fixes
...
* Fixes #6221 - C3 hang on `import wifi`. Enabling the WiFi PHY was
disabling USB. Now boards that use it set CONFIG_ESP_PHY_ENABLE_USB
explicitly.
* Fixes #6655 - Allows pasting into the web serial page. Fixes reading
more than 0xf bytes at a time.
* Fixes #6653 - Fixes web socket encoding of payloads >125 bytes. Can
happen when printing a long string.
* Fixes C3 responsiveness when waiting for key to enter REPL. (It
now correctly stops sleeping.)
* Disables title bar updates when in raw REPL. Related to #6548 .
* Adds version to title bar.
2022-07-28 16:06:56 -07:00
3817d007aa
clean up esp32 sdkconfigs
2022-07-28 17:52:27 -04:00
c29fa9012d
Merge pull request #6645 from prplz/seeed_xiao_esp32c3
...
Add board: seeed_xiao_esp32c3
2022-07-28 11:22:43 -07:00
ddeb833a3a
Shrink Feather S3 4mb build with -Os
2022-07-28 07:43:39 -07:00
555bf7cc12
Add board: seeed_xiao_esp32c3
2022-07-28 22:48:03 +10:00
2a9d3c5ed2
Adds BOOT0 (GPIO 0) as a named pin for MagTag.
2022-07-27 08:38:52 -04:00
47f718aa92
Merge pull request #6615 from askpatrickw/beetle-esp32-c3
...
Beetle esp32 c3
2022-07-25 15:00:05 -07:00
e877644012
use -Os on Feather ESP32-S3 TFT to shrink build
2022-07-19 17:45:29 -04:00
1e99d68af7
Add Creator ID
2022-07-17 12:38:27 -07:00
71c22232f0
board config compelted
2022-07-17 11:48:45 -07:00
c2a8ef752c
Remove ps2io to make space
2022-07-15 14:01:50 -07:00
ac460dd1e1
Merge branch 'main' into esp32
2022-07-13 15:30:53 -07:00
08b4a64bd2
Update the PID
2022-07-11 08:39:10 -07:00
bc14b7ad47
Fix the display on the esp box lite
2022-07-08 15:40:59 -07:00
c316b950c7
merge from adafruit/main
2022-07-08 15:42:19 -04:00
d869b441f4
further ESP32 sdkconfig fixes; add CIRCUITPY_STATUS_BAR
2022-07-08 15:27:00 -04:00
76e32dcf93
remove need for CIRCUITPY_ESP_PSRAM
2022-07-08 14:54:55 -04:00
afbf4de071
Uncomment or remove debugging changes
2022-07-08 12:53:25 -04:00
c3cd32e773
CPU freq to 240 MHz, redo sdkconfigs
2022-07-08 10:50:00 -04:00
75208573f4
tweak sdkconfig; add temp logging to mp_make_function_from_raw_code
2022-07-08 09:53:29 -04:00
4e88d795e1
Thonny causing crash emitglue.c:199:
2022-07-06 23:01:19 -04:00
d83720f659
Tweak display init
2022-07-05 17:02:52 -07:00
cd77517b2f
Add build for ESP32-S3 Box Lite
2022-07-05 16:35:42 -07:00
c3cf9ba9ce
remove wifi max from sdkconfig
2022-07-01 14:50:47 -07:00
aaeda97818
update PHY section, correct name
2022-07-01 14:50:47 -07:00
aa53d36934
setting CONFIG_ESP32_PHY_MAX_WIFI_TX_POWER to 8.5
2022-07-01 14:50:47 -07:00
7e367eeb58
Update "D" mappings
2022-07-01 14:50:47 -07:00
d4b26daf1b
correct creator and creation IDs
2022-07-01 14:50:47 -07:00
6c7faf0eba
Change USB VID & PID to Creator and Creation IDs
2022-07-01 14:50:47 -07:00
3253ae2503
tested and corrected several pins
2022-07-01 14:50:47 -07:00
f10fa566aa
REPL works. Based on QTPYC3.
2022-07-01 14:50:47 -07:00
a3070f6c2a
Changes to Pin Mappings
2022-07-01 14:50:46 -07:00
b37236f83f
C3 does not have PSRAM
2022-07-01 14:50:46 -07:00
af629ab180
Add assumed PID value
2022-07-01 14:50:46 -07:00
c1e6003d26
remove comment that breaks {ID Checker
2022-07-01 14:50:46 -07:00
9bae8549c5
add UART RX TX to mpconfigboard
2022-07-01 14:50:46 -07:00
6763b7b968
add A5
2022-07-01 14:50:46 -07:00
bcf27e146b
fix build break and add io 20/21
2022-07-01 14:50:46 -07:00
dc1c86738a
Initial pin mapping pass
2022-07-01 14:50:46 -07:00
fd4695d0f2
Gettting started with pin mapping.
2022-07-01 14:50:46 -07:00
Dan Halbert
Wind-stormger
Dan Halbert
Kong Wai Weng
microDev
Seon Rozenblum
bill88t
wemos
Jeff Epler
Martin
lady ada
Scott Shawcroft
paul
Michael Himing
Chris Dailey
Patrick
Melissa LeBlanc-Williams