Commit Graph

69 Commits

Author SHA1 Message Date
Chris Waggoner b1efc1340a mpy-cross,unix: Include alloca.h for NetBSD. 2022-08-23 13:39:18 +10:00
Damien George ec24cd1d25 mpy-cross,unix: Remove .gitignore file.
Now that all build artefacts are placed in a build/ directory the gitignore
is no longer needed.

Signed-off-by: Damien George <damien@micropython.org>
2022-08-12 16:38:04 +10:00
David Yang d7ef90122e mpy-cross/Makefile: Respect existing CFLAGS and LDFLAGS. 2022-08-08 23:45:32 +10:00
stijn c4adeb2e08 windows: Provide a definition for MP_ALWAYSINLINE. 2022-07-18 23:24:46 +10:00
Damien George 4290d51320 py/emitinlinethumb: Make float instruction use dynamically selectable.
This allows mpy-cross to dynamically select whether ARMv7-M float
instructions are supported in @micropython.asm_thumb functions.

Signed-off-by: Damien George <damien@micropython.org>
2022-05-26 12:22:07 +10:00
Damien George cca08922d9 py/emitinlinethumb: Make ARMv7-M instruction use dynamically selectable.
This follows on from a5324a1074 and allows
mpy-cross to dynamically select whether ARMv7-M instructions are supported
in @micropython.asm_thumb functions.

The config option MICROPY_EMIT_INLINE_THUMB_ARMV7M is no longer needed, it
is now controlled by MICROPY_EMIT_THUMB_ARMV7M.

Signed-off-by: Damien George <damien@micropython.org>
2022-05-26 11:54:48 +10:00
Damien George 5956466c0e py/builtin: Clean up and simplify import_stat and builtin_open config.
The following changes are made:

- If MICROPY_VFS is enabled then mp_vfs_import_stat and mp_vfs_open are
  automatically used for mp_import_stat and mp_builtin_open respectively.

- If MICROPY_PY_IO is enabled then "open" is automatically included in the
  set of builtins, and points to mp_builtin_open_obj.

This helps to clean up and simplify the most common port configuration.

Signed-off-by: Damien George <damien@micropython.org>
2022-05-25 13:04:45 +10:00
Damien George 0e28a1f0e5 mpy-cross: Add armv6m architecture option.
Signed-off-by: Damien George <damien@micropython.org>
2022-05-23 23:01:25 +10:00
Damien George c49d5207e9 py/persistentcode: Remove unicode feature flag from .mpy file.
Prior to this commit, even with unicode disabled .py and .mpy files could
contain unicode characters, eg by entering them directly in a string as
utf-8 encoded.

The only thing the compiler disallowed (with unicode disabled) was using
\uxxxx and \Uxxxxxxxx notation to specify a character within a string with
value >= 0x100; that would give a SyntaxError.

With this change mpy-cross will now accept \u and \U notation to insert a
character with value >= 0x100 into a string (because the -mno-unicode
option is now gone, there's no way to forbid this).  The runtime will
happily work with strings with such characters, just like it already works
with strings with characters that were utf-8 encoded directly.

This change simplifies things because there are no longer any feature
flags in .mpy files, and any bytecode .mpy will now run on any target.

Signed-off-by: Damien George <damien@micropython.org>
2022-05-17 12:51:54 +10:00
stijn c2e8a5acd2 windows: Unify project file headers.
The xmlns attribute is required for older msbuild version (e.g. for
VS2015).  Add it where needed, and reorder the attributes so all
files look the same.
2022-02-25 16:41:11 +11:00
Damien George f2040bfc7e py: Rework bytecode and .mpy file format to be mostly static data.
Background: .mpy files are precompiled .py files, built using mpy-cross,
that contain compiled bytecode functions (and can also contain machine
code). The benefit of using an .mpy file over a .py file is that they are
faster to import and take less memory when importing.  They are also
smaller on disk.

But the real benefit of .mpy files comes when they are frozen into the
firmware.  This is done by loading the .mpy file during compilation of the
firmware and turning it into a set of big C data structures (the job of
mpy-tool.py), which are then compiled and downloaded into the ROM of a
device.  These C data structures can be executed in-place, ie directly from
ROM.  This makes importing even faster because there is very little to do,
and also means such frozen modules take up much less RAM (because their
bytecode stays in ROM).

The downside of frozen code is that it requires recompiling and reflashing
the entire firmware.  This can be a big barrier to entry, slows down
development time, and makes it harder to do OTA updates of frozen code
(because the whole firmware must be updated).

This commit attempts to solve this problem by providing a solution that
sits between loading .mpy files into RAM and freezing them into the
firmware.  The .mpy file format has been reworked so that it consists of
data and bytecode which is mostly static and ready to run in-place.  If
these new .mpy files are located in flash/ROM which is memory addressable,
the .mpy file can be executed (mostly) in-place.

With this approach there is still a small amount of unpacking and linking
of the .mpy file that needs to be done when it's imported, but it's still
much better than loading an .mpy from disk into RAM (although not as good
as freezing .mpy files into the firmware).

The main trick to make static .mpy files is to adjust the bytecode so any
qstrs that it references now go through a lookup table to convert from
local qstr number in the module to global qstr number in the firmware.
That means the bytecode does not need linking/rewriting of qstrs when it's
loaded.  Instead only a small qstr table needs to be built (and put in RAM)
at import time.  This means the bytecode itself is static/constant and can
be used directly if it's in addressable memory.  Also the qstr string data
in the .mpy file, and some constant object data, can be used directly.
Note that the qstr table is global to the module (ie not per function).

In more detail, in the VM what used to be (schematically):

    qst = DECODE_QSTR_VALUE;

is now (schematically):

    idx = DECODE_QSTR_INDEX;
    qst = qstr_table[idx];

That allows the bytecode to be fixed at compile time and not need
relinking/rewriting of the qstr values.  Only qstr_table needs to be linked
when the .mpy is loaded.

Incidentally, this helps to reduce the size of bytecode because what used
to be 2-byte qstr values in the bytecode are now (mostly) 1-byte indices.
If the module uses the same qstr more than two times then the bytecode is
smaller than before.

The following changes are measured for this commit compared to the
previous (the baseline):
- average 7%-9% reduction in size of .mpy files
- frozen code size is reduced by about 5%-7%
- importing .py files uses about 5% less RAM in total
- importing .mpy files uses about 4% less RAM in total
- importing .py and .mpy files takes about the same time as before

The qstr indirection in the bytecode has only a small impact on VM
performance.  For stm32 on PYBv1.0 the performance change of this commit
is:

diff of scores (higher is better)
N=100 M=100             baseline -> this-commit  diff      diff% (error%)
bm_chaos.py               371.07 ->  357.39 :  -13.68 =  -3.687% (+/-0.02%)
bm_fannkuch.py             78.72 ->   77.49 :   -1.23 =  -1.563% (+/-0.01%)
bm_fft.py                2591.73 -> 2539.28 :  -52.45 =  -2.024% (+/-0.00%)
bm_float.py              6034.93 -> 5908.30 : -126.63 =  -2.098% (+/-0.01%)
bm_hexiom.py               48.96 ->   47.93 :   -1.03 =  -2.104% (+/-0.00%)
bm_nqueens.py            4510.63 -> 4459.94 :  -50.69 =  -1.124% (+/-0.00%)
bm_pidigits.py            650.28 ->  644.96 :   -5.32 =  -0.818% (+/-0.23%)
core_import_mpy_multi.py  564.77 ->  581.49 :  +16.72 =  +2.960% (+/-0.01%)
core_import_mpy_single.py  68.67 ->   67.16 :   -1.51 =  -2.199% (+/-0.01%)
core_qstr.py               64.16 ->   64.12 :   -0.04 =  -0.062% (+/-0.00%)
core_yield_from.py        362.58 ->  354.50 :   -8.08 =  -2.228% (+/-0.00%)
misc_aes.py               429.69 ->  405.59 :  -24.10 =  -5.609% (+/-0.01%)
misc_mandel.py           3485.13 -> 3416.51 :  -68.62 =  -1.969% (+/-0.00%)
misc_pystone.py          2496.53 -> 2405.56 :  -90.97 =  -3.644% (+/-0.01%)
misc_raytrace.py          381.47 ->  374.01 :   -7.46 =  -1.956% (+/-0.01%)
viper_call0.py            576.73 ->  572.49 :   -4.24 =  -0.735% (+/-0.04%)
viper_call1a.py           550.37 ->  546.21 :   -4.16 =  -0.756% (+/-0.09%)
viper_call1b.py           438.23 ->  435.68 :   -2.55 =  -0.582% (+/-0.06%)
viper_call1c.py           442.84 ->  440.04 :   -2.80 =  -0.632% (+/-0.08%)
viper_call2a.py           536.31 ->  532.35 :   -3.96 =  -0.738% (+/-0.06%)
viper_call2b.py           382.34 ->  377.07 :   -5.27 =  -1.378% (+/-0.03%)

And for unix on x64:

diff of scores (higher is better)
N=2000 M=2000        baseline -> this-commit     diff      diff% (error%)
bm_chaos.py          13594.20 ->  13073.84 :  -520.36 =  -3.828% (+/-5.44%)
bm_fannkuch.py          60.63 ->     59.58 :    -1.05 =  -1.732% (+/-3.01%)
bm_fft.py           112009.15 -> 111603.32 :  -405.83 =  -0.362% (+/-4.03%)
bm_float.py         246202.55 -> 247923.81 : +1721.26 =  +0.699% (+/-2.79%)
bm_hexiom.py           615.65 ->    617.21 :    +1.56 =  +0.253% (+/-1.64%)
bm_nqueens.py       215807.95 -> 215600.96 :  -206.99 =  -0.096% (+/-3.52%)
bm_pidigits.py        8246.74 ->   8422.82 :  +176.08 =  +2.135% (+/-3.64%)
misc_aes.py          16133.00 ->  16452.74 :  +319.74 =  +1.982% (+/-1.50%)
misc_mandel.py      128146.69 -> 130796.43 : +2649.74 =  +2.068% (+/-3.18%)
misc_pystone.py      83811.49 ->  83124.85 :  -686.64 =  -0.819% (+/-1.03%)
misc_raytrace.py     21688.02 ->  21385.10 :  -302.92 =  -1.397% (+/-3.20%)

The code size change is (firmware with a lot of frozen code benefits the
most):

       bare-arm:  +396 +0.697%
    minimal x86: +1595 +0.979% [incl +32(data)]
       unix x64: +2408 +0.470% [incl +800(data)]
    unix nanbox: +1396 +0.309% [incl -96(data)]
          stm32: -1256 -0.318% PYBV10
         cc3200:  +288 +0.157%
        esp8266:  -260 -0.037% GENERIC
          esp32:  -216 -0.014% GENERIC[incl -1072(data)]
            nrf:  +116 +0.067% pca10040
            rp2:  -664 -0.135% PICO
           samd:  +844 +0.607% ADAFRUIT_ITSYBITSY_M4_EXPRESS

As part of this change the .mpy file format version is bumped to version 6.
And mpy-tool.py has been improved to provide a good visualisation of the
contents of .mpy files.

In summary: this commit changes the bytecode to use qstr indirection, and
reworks the .mpy file format to be simpler and allow .mpy files to be
executed in-place.  Performance is not impacted too much.  Eventually it
will be possible to store such .mpy files in a linear, read-only, memory-
mappable filesystem so they can be executed from flash/ROM.  This will
essentially be able to replace frozen code for most applications.

Signed-off-by: Damien George <damien@micropython.org>
2022-02-24 18:08:43 +11:00
stijn a9448c0a86 all: Fix MICROPY_OBJ_REPR_D compilation with msvc. 2022-01-23 09:25:01 +11:00
Damien George de43b500bd py/runtime: Allow initialising sys.path/argv with defaults.
If MICROPY_PY_SYS_PATH_ARGV_DEFAULTS is enabled (which it is by default)
then sys.path and sys.argv will be initialised and populated with default
values.  This keeps all bare-metal ports aligned.

Signed-off-by: Damien George <damien@micropython.org>
2021-12-18 00:08:07 +11:00
Jim Mussared b326edf68c all: Remove MICROPY_OPT_CACHE_MAP_LOOKUP_IN_BYTECODE.
This commit removes all parts of code associated with the existing
MICROPY_OPT_CACHE_MAP_LOOKUP_IN_BYTECODE optimisation option, including the
-mcache-lookup-bc option to mpy-cross.

This feature originally provided a significant performance boost for Unix,
but wasn't able to be enabled for MCU targets (due to frozen bytecode), and
added significant extra complexity to generating and distributing .mpy
files.

The equivalent performance gain is now provided by the combination of
MICROPY_OPT_LOAD_ATTR_FAST_PATH and MICROPY_OPT_MAP_LOOKUP_CACHE (which has
been enabled on the unix port in the previous commit).

It's hard to provide precise performance numbers, but tests have been run
on a wide variety of architectures (x86-64, ARM Cortex, Aarch64, RISC-V,
xtensa) and they all generally agree on the qualitative improvements seen
by the combination of MICROPY_OPT_LOAD_ATTR_FAST_PATH and
MICROPY_OPT_MAP_LOOKUP_CACHE.

For example, on a "quiet" Linux x64 environment (i3-5010U @ 2.10GHz) the
change from CACHE_MAP_LOOKUP_IN_BYTECODE, to LOAD_ATTR_FAST_PATH combined
with MAP_LOOKUP_CACHE is:

diff of scores (higher is better)
N=2000 M=2000       bccache -> attrmapcache      diff      diff% (error%)
bm_chaos.py        13742.56 ->   13905.67 :   +163.11 =  +1.187% (+/-3.75%)
bm_fannkuch.py        60.13 ->      61.34 :     +1.21 =  +2.012% (+/-2.11%)
bm_fft.py         113083.20 ->  114793.68 :  +1710.48 =  +1.513% (+/-1.57%)
bm_float.py       256552.80 ->  243908.29 : -12644.51 =  -4.929% (+/-1.90%)
bm_hexiom.py         521.93 ->     625.41 :   +103.48 = +19.826% (+/-0.40%)
bm_nqueens.py     197544.25 ->  217713.12 : +20168.87 = +10.210% (+/-3.01%)
bm_pidigits.py      8072.98 ->    8198.75 :   +125.77 =  +1.558% (+/-3.22%)
misc_aes.py        17283.45 ->   16480.52 :   -802.93 =  -4.646% (+/-0.82%)
misc_mandel.py     99083.99 ->  128939.84 : +29855.85 = +30.132% (+/-5.88%)
misc_pystone.py    83860.10 ->   82592.56 :  -1267.54 =  -1.511% (+/-2.27%)
misc_raytrace.py   21490.40 ->   22227.23 :   +736.83 =  +3.429% (+/-1.88%)

This shows that the new optimisations are at least as good as the existing
inline-bytecode-caching, and are sometimes much better (because the new
ones apply caching to a wider variety of map lookups).

The new optimisations can also benefit code generated by the native
emitter, because they apply to the runtime rather than the generated code.
The improvement for the native emitter when LOAD_ATTR_FAST_PATH and
MAP_LOOKUP_CACHE are enabled is (same Linux environment as above):

diff of scores (higher is better)
N=2000 M=2000        native -> nat-attrmapcache  diff      diff% (error%)
bm_chaos.py        14130.62 ->   15464.68 :  +1334.06 =  +9.441% (+/-7.11%)
bm_fannkuch.py        74.96 ->      76.16 :     +1.20 =  +1.601% (+/-1.80%)
bm_fft.py         166682.99 ->  168221.86 :  +1538.87 =  +0.923% (+/-4.20%)
bm_float.py       233415.23 ->  265524.90 : +32109.67 = +13.756% (+/-2.57%)
bm_hexiom.py         628.59 ->     734.17 :   +105.58 = +16.796% (+/-1.39%)
bm_nqueens.py     225418.44 ->  232926.45 :  +7508.01 =  +3.331% (+/-3.10%)
bm_pidigits.py      6322.00 ->    6379.52 :    +57.52 =  +0.910% (+/-5.62%)
misc_aes.py        20670.10 ->   27223.18 :  +6553.08 = +31.703% (+/-1.56%)
misc_mandel.py    138221.11 ->  152014.01 : +13792.90 =  +9.979% (+/-2.46%)
misc_pystone.py    85032.14 ->  105681.44 : +20649.30 = +24.284% (+/-2.25%)
misc_raytrace.py   19800.01 ->   23350.73 :  +3550.72 = +17.933% (+/-2.79%)

In summary, compared to MICROPY_OPT_CACHE_MAP_LOOKUP_IN_BYTECODE, the new
MICROPY_OPT_LOAD_ATTR_FAST_PATH and MICROPY_OPT_MAP_LOOKUP_CACHE options:
- are simpler;
- take less code size;
- are faster (generally);
- work with code generated by the native emitter;
- can be used on embedded targets with a small and constant RAM overhead;
- allow the same .mpy bytecode to run on all targets.

See #7680 for further discussion.  And see also #7653 for a discussion
about simplifying mpy-cross options.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-09-16 16:04:03 +10:00
Jim Mussared 692d36d779 py: Implement partial PEP-498 (f-string) support.
This implements (most of) the PEP-498 spec for f-strings and is based on
https://github.com/micropython/micropython/pull/4998 by @klardotsh.

It is implemented in the lexer as a syntax translation to `str.format`:
  f"{a}" --> "{}".format(a)

It also supports:
  f"{a=}" --> "a={}".format(a)

This is done by extracting the arguments into a temporary vstr buffer,
then after the string has been tokenized, the lexer input queue is saved
and the contents of the temporary vstr buffer are injected into the lexer
instead.

There are four main limitations:
- raw f-strings (`fr` or `rf` prefixes) are not supported and will raise
  `SyntaxError: raw f-strings are not supported`.

- literal concatenation of f-strings with adjacent strings will fail
    "{}" f"{a}" --> "{}{}".format(a)    (str.format will incorrectly use
                                         the braces from the non-f-string)
    f"{a}" f"{a}" --> "{}".format(a) "{}".format(a) (cannot concatenate)

- PEP-498 requires the full parser to understand the interpolated
  argument, however because this entirely runs in the lexer it cannot
  resolve nested braces in expressions like
    f"{'}'}"

- The !r, !s, and !a conversions are not supported.

Includes tests and cpydiffs.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-08-14 16:58:40 +10:00
Damien George 136369d72f all: Update to point to files in new shared/ directory.
Signed-off-by: Damien George <damien@micropython.org>
2021-07-12 17:08:10 +10:00
David Lechner 115acadf92 mpy-cross: Disable stack check when building with Emscripten.
`mpy-cross` can be compiled to WASM using Emscripten, but it is not happy
unless the stack check is disabled.

Signed-off-by: David Lechner <david@pybricks.com>
2021-06-25 10:48:56 +10:00
Damien George ad4656b861 all: Rename BYTES_PER_WORD to MP_BYTES_PER_OBJ_WORD.
The "word" referred to by BYTES_PER_WORD is actually the size of mp_obj_t
which is not always the same as the size of a pointer on the target
architecture.  So rename this config value to better reflect what it
measures, and also prefix it with MP_.

For uses of BYTES_PER_WORD in setting the stack limit this has been
changed to sizeof(void *), because the stack usually grows with
machine-word sized values (eg an nlr_buf_t has many machine words in it).

Signed-off-by: Damien George <damien@micropython.org>
2021-02-04 22:46:42 +11:00
David CARLIER cb30928ac8 py/persistentcode: Introduce MICROPY_PERSISTENT_CODE_SAVE_FILE option.
This should be enabled when the mp_raw_code_save_file function is needed.

It is enabled for mpy-cross, and a check for defined(__APPLE__) is added to
cover Mac M1 systems.
2021-01-30 15:13:24 +11:00
Emil Renner Berthing bef412789e mpy-cross: Enable more warnings. 2020-10-22 11:54:11 +02:00
Damien George 5c8bf12acf all: Fix auto-enable of MICROPY_GCREGS_SETJMP to select GC behaviour.
Only enable it if MICROPY_GCREGS_SETJMP is not already defined, and no
supported architecture is defined.
2020-04-30 16:49:42 +10:00
Jim Mussared 710426024a all: Factor gchelper code to one place and use it for unix & ARM ports.
No functionality change is intended with this commit, it just consolidates
the separate implementations of GC helper code to the lib/utils/ directory
as a general set of helper functions useful for any port.  This reduces
duplication of code, and makes it easier for future ports or embedders to
get the GC implementation correct.

Ports should now link against gchelper_native.c and either gchelper_m0.s or
gchelper_m3.s (currently only Cortex-M is supported but other architectures
can follow), or use the fallback gchelper_generic.c which will work on
x86/x64/ARM.

The gc_helper_get_sp function from gchelper_m3.s is not really GC related
and was only used by cc3200, so it has been moved to that port and renamed
to cortex_m3_get_sp.
2020-04-29 23:45:19 +10:00
stijn 84fa3312cf all: Format code to add space after C++-style comment start.
Note: the uncrustify configuration is explicitly set to 'add' instead of
'force' in order not to alter the comments which use extra spaces after //
as a means of indenting text for clarity.
2020-04-23 11:24:25 +10:00
David Lechner 6943fb60fe mpy-cross/main: Print uncaught nlr jump to stderr.
This is to be consistent with the same change in the unix port,
4ab8bee82f.
2020-04-16 16:22:25 +10:00
David Lechner 803e5eadea mpy-cross/main: Fix stderr_print_strn parameter type.
Change mp_uint_t to size_t to match the mp_print_strn_t function prototype.
This fixes a compiler warning when mp_uint_t and size_t are not the same
size.
2020-04-16 16:18:13 +10:00
Damien George 1a3e386c67 all: Remove spaces inside and around parenthesis.
Using new options enabled in the uncrustify configuration.
2020-03-28 23:36:44 +11:00
Damien George 69661f3343 all: Reformat C and Python source code with tools/codeformat.py.
This is run with uncrustify 0.70.1, and black 19.10b0.
2020-02-28 10:33:03 +11:00
Jim Mussared 193bc3702f mpy-cross/README.md: Add notes about -march and -O. 2019-12-09 14:23:04 +11:00
Damien George 82a19cb39f mpy-cross: Support armv7em, armv7emsp, armv7emdp architectures. 2019-12-03 12:32:29 +11:00
Damien George 1d21b4e7d1 mpy-cross: Enable Xtensa-Windowed native emitter.
Selectable via the command line: -march=xtensawin.
2019-10-05 13:45:32 +10:00
Damien George b596638b9b mpy-cross: Set number of registers in nlr_buf_t based on native arch.
Fixes #5059.  Done in collaboration with Jim Mussared.
2019-09-26 15:53:05 +10:00
stijn d96391aca3 mpy-cross,windows: Add msvc build of mpy-cross.
Add the project file to the mpy-cross directory, which is also where the
executable ends up, and change the Appveyor settings to build mpy-cross
with both msvc and mingw-w64 and verify this all works by running tests
with --via-mpy.
2019-09-18 22:16:36 +10:00
stijn 5501092776 mpy-cross: Make mpconfigport.h compatible with msvc compiler.
Add a copy of the required options from windows/mpconfigport.h.
2019-09-18 22:16:19 +10:00
Damien George af20c2ead3 py: Add global default_emit_opt variable to make emit kind persistent.
mp_compile no longer takes an emit_opt argument, rather this setting is now
provided by the global default_emit_opt variable.

Now, when -X emit=native is passed as a command-line option, the emitter
will be set for all compiled modules (included imports), not just the
top-level script.

In the future there could be a way to also set this variable from a script.

Fixes issue #4267.
2019-08-28 12:47:58 +10:00
Damien George 8e3e05761e mpy-cross/main: Only accept full emit cmdline options if native enabled. 2019-08-28 12:47:58 +10:00
Damien George 4173950658 mpy-cross: Do not automatically build mpy-cross, rather do it manually.
Building mpy-cross automatically leads to some issues with the build
process and slows it down.  Instead, require it to be built manually.
2019-06-03 14:44:44 +10:00
Damien George c066dadc5b mpy-cross/mpconfigport.h: Remove defn of MP_NOINLINE to use global one.
A global definition of MP_NOINLINE was added to py/mpconfig.h long ago in
0f5bf1aafe
2019-05-24 14:51:48 +10:00
Damien George 7e90e22ea5 mpy-cross: Add --version command line option to print version info.
Prints something like:

MicroPython v1.10-304-g8031b7a25 on 2019-05-02; mpy-cross emitting mpy v4
2019-05-07 13:54:20 +10:00
Damien George e70c438c71 mpy-cross: Automatically select ARMV6 arch when running on such a host. 2019-05-01 15:31:00 +10:00
Damien George 1556af19bf mpy-cross: Support compiling with MICROPY_PY___FILE__ enabled. 2019-03-26 18:19:21 +11:00
Damien George 9c9bc65e74 mpy-cross: Add "-march=<arch>" option to select native emitter. 2019-03-14 12:22:25 +11:00
Andrew Leech 89ff506513 py: Update and rework build system for including external C modules.
How to use this feature is documented in docs/develop/cmodules.rst.
2019-03-08 22:58:42 +11:00
Damien George 31d2d83e79 mpy-cross: Enable building of x64 native .mpy files. 2019-03-08 16:51:04 +11:00
Paul Sokolovsky ab78fe0eb9 mpy-cross/Makefile: Also undefine MICROPY_FORCE_32BIT and CROSS_COMPILE.
mpy-cross is a host, not target binary. It should not be build with the
target compiler, compiler options and other settings. For example,

If someone currently tries to build from pristine checkout the unix port
with the following command:

    make CROSS_COMPILE=arm-linux-gnueabihf-

then mpy-cross will be built with arm-linux-gnueabihf-gcc and of course
won't run on the host, leading to overall build failure.

This situation was worked around for some options in 1d8c3f4cff, so add
MICROPY_FORCE_32BIT and CROSS_COMPILE to that set too.
2018-08-14 17:20:18 +10:00
Damien George ee40d1704f mpy-cross: Make build independent of extmod directory.
mpy-cross doesn't depend on any code in the extmod directory so completely
exclude it from the build (extmod may still be scanned for qstrs but that
is controlled by py/py.mk).  This speeds up the build a little, and
improves abstraction of this component.

Also, make -I$(BUILD) take precedence over -I$(TOP) in case there are stray
files in the root directory that would be picked up.
2018-07-10 14:11:28 +10:00
Damien George a3dc1b1957 all: Remove inclusion of internal py header files.
Header files that are considered internal to the py core and should not
normally be included directly are:
    py/nlr.h - internal nlr configuration and declarations
    py/bc0.h - contains bytecode macro definitions
    py/runtime0.h - contains basic runtime enums

Instead, the top-level header files to include are one of:
    py/obj.h - includes runtime0.h and defines everything to use the
        mp_obj_t type
    py/runtime.h - includes mpstate.h and hence nlr.h, obj.h, runtime0.h,
        and defines everything to use the general runtime support functions

Additional, specific headers (eg py/objlist.h) can be included if needed.
2017-10-04 12:37:50 +11:00
Damien George 4a93801c12 all: Update Makefiles and others to build with new ports/ dir layout.
Also renames "stmhal" to "stm32" in documentation and everywhere else.
2017-09-06 14:09:13 +10:00
Damien George 7d4a2f773c all: Make use of $(TOP) variable in Makefiles, instead of "..".
$(TOP) is defined in py/mkenv.mk and should be used to refer to the top
level of this repository.
2017-08-11 12:22:19 +10:00
Alexander Steffen 55f33240f3 all: Use the name MicroPython consistently in comments
There were several different spellings of MicroPython present in comments,
when there should be only one.
2017-07-31 18:35:40 +10:00
Damien George aa7be82a4d all: Don't include system errno.h when it's not needed. 2017-07-24 18:43:14 +10:00