Commit Graph

472 Commits

Author SHA1 Message Date
Scott Shawcroft d2860b58b0
Check background pending before sleep
There is a race between when we run background tasks and when we
sleep. If an interrupt happens between the two, then we may delay
executing the background task. On some ports we checked this for
TinyUSB already. On iMX RT, we didn't which caused USB issues.
This PR makes it more generic for all background tasks including
USB.

Fixes #5086 and maybe others.
2021-08-19 12:18:13 -07:00
Scott Shawcroft fdf49a4b2f
Increase tx power for BLE workflow pairing 2021-08-13 11:30:09 -07:00
Jeff Epler bfea6947e5 Improve mp_printf with support for compressed strings
* The new nonstandard '%S' format takes a pointer to compressed_string_t
   and prints it

 * The new mp_cprintf and mp_vcprintf take a format string that is a
   compressed_string_t
2021-08-09 08:27:28 -05:00
Jeff Epler d59a28db97 Compress word offset table
By storing "count of words by length", the long `wends` table can be
replaced with a short `wlencount` table.  This saves flash storage space.

Extend the range of string lengths that can be in the dictionary.
Originally it was to 2 to 9; at one point it was changed to 3 to 9.
Putting the lower bound back at 2 has a positive impact on the French
translation (a bunch of them, such as "ch", "\r\n", "%q", are used).
Increasing the maximum length gets 'mpossible', ' doit être ',
and 'CircuitPyth' at the long end.  This adds a bit of processing time
to makeqstrdata. The specific 2/11 values are again empirical based on
the French translation on the adafruit_proxlight_trinkey_m0.
2021-08-07 09:23:35 -05:00
Scott Shawcroft e3fa6e2c35
Merge pull request #5089 from tannewt/disable_ble_workflow
Add ability to disable BLE workflow
2021-08-05 11:21:17 -07:00
Dan Halbert 81833035fc raytac_mdbt50q-rx 2021-08-04 15:47:19 -04:00
Scott Shawcroft 713c8e7b3f
Fix builds without the ble workflow 2021-08-03 14:36:41 -07:00
Scott Shawcroft 1e225610cc
Add ability to disable BLE workflow
Call `supervisor.disable_ble_workflow()` and the BLE workflow will
be disabled until the chip is reset.

This also includes a couple fixes:
1. Terminals can now be deinit by setting the tilegrid to NULL. This
  prevents using the tilegrid before display is init.
2. Fix BLE serial send amount when sending more than a single packet.

Fixes #5049
2021-08-02 18:37:19 -07:00
Dan Halbert 901a6c27c0 remove gamepad; deprecate gamepadshift 2021-07-26 22:15:09 -04:00
Scott Shawcroft e7fe0d9a71
Fix single neopixel status boards 2021-07-23 15:42:06 -07:00
Scott Shawcroft 70cbb4eddb
Support multiple status neopixels
Use the 10 neopixels on the playgrounds for status.

Fixes #5039
2021-07-23 15:17:09 -07:00
microDev e790ff7327
Merge pull request #5036 from tannewt/esp_oserror0
Remove OSError(0) and old network modules
2021-07-23 11:00:56 +05:30
Scott Shawcroft beda1f7998
Merge pull request #5037 from hierophect/getprevtraceback
Add supervisor.get_previous_traceback() function.
2021-07-22 17:00:14 -07:00
Lucian Copeland ace04ef600 Formatting fixes 2021-07-22 12:57:10 -04:00
Christian Walther cf97793af8 Add supervisor.get_previous_traceback() function.
Useful for #1084.
2021-07-22 12:23:55 -04:00
Scott Shawcroft f84cb94819
Remove OSError(0) and old network modules
The newer modules are `socketpool` and `ssl`.

Fixes #3924, related to #2021, closes #1880, closes #2273, closes #2274
2021-07-21 17:33:40 -07:00
Dan Halbert ce7301527a
Merge pull request #5024 from tannewt/rp2_ble_wait
Don't blink blue on non-BLE workflow boards
2021-07-19 23:51:27 -04:00
Scott Shawcroft f8290e746b
Don't blink blue on non-BLE workflow boards
This includes any boards that have _bleio implemented via HCI.

Fixes #4969
2021-07-19 18:40:37 -07:00
Scott Shawcroft ca2cb9af2b
Remove MICROPY_PORT_* macros used for never reset
Now we use never_reset which is generally more correct and easier
to get right.

Fixes #5001 and fixes #4997
2021-07-15 16:20:04 -07:00
Scott Shawcroft 4d3a355f0a
Tweak blink and treat SWD reset like reset button 2021-07-14 16:45:47 -07:00
Scott Shawcroft 0fadf028ef
Create first BLE-only board, Micro:Bit v2
This fixes build issues with USB off, tweaks the README to allow
for BLE-only boards and adds the Micro:Bit v2 definition.

Fixes #4546
2021-07-14 09:55:51 -07:00
Scott Shawcroft 3940878695
Shrink builds and handle 0-length writes 2021-07-01 12:49:11 -07:00
Scott Shawcroft f2ef586331
clean up 2021-06-29 11:54:15 -07:00
Scott Shawcroft b36858daa0
Fix advertisement 2021-06-25 16:40:23 -07:00
Scott Shawcroft 3177973843
Add BLE serial service 2021-06-25 15:00:10 -07:00
Scott Shawcroft d67fb852a1
Merge pull request #3454 from cwalther/setnextcode
Add supervisor.set_next_code_file()
2021-06-25 11:00:53 -07:00
Scott Shawcroft dc76306cfa
Enable a BLE workflow
nRF CircuitPython boards will now provide the file transfer
service defined here: https://github.com/adafruit/Adafruit_CircuitPython_BLE_File_Transfer

USB capable boards will only advertise if previously bonded to a
device or if the reset button is pressed during the fast blue
flashes on start up. When pressed, the board will restart again but
the blue period will not flash.

Boards without USB will always advertise.

When previously bonded, the advertisement is private so that no
other peers can connect. If advertising publicly, the tx power is
lowered to reduce the likelihood of bonding from a distance.

This PR also fixes issues with loading identities of bonded peers
so that our address can now be resolved and we can resolve others'
addresses when scanning.
2021-06-24 12:59:14 -07:00
Scott Shawcroft b81573d439
Merge pull request #4891 from dhalbert/keypad-scanning-events
keypad: support for vector and matrix key scanning
2021-06-24 10:25:21 -07:00
Scott Shawcroft a7e353b80e
Merge pull request #4897 from jepler/merge-1.16
Merge 1.16
2021-06-23 10:15:10 -07:00
Dan Halbert ed41acd879 merge from upstream to fix translations 2021-06-21 08:26:44 -04:00
Lucian Copeland 626e4e9748 Fix missed precommit formatting 2021-06-20 17:00:56 -04:00
Lucian Copeland cf9741bd3a Merge remote-tracking branch 'upstream/main' into setnextcode 2021-06-20 15:25:37 -04:00
Jeff Epler e1d7e46e88 fix keyboard interrupt 2021-06-18 11:15:51 -05:00
Dan Halbert 32eec85230 compiles 2021-06-14 20:54:43 -04:00
Jeff Epler 1d03ec12b5 supervisor: Fix assertion error in supervisor_move_memory
It was possible for _only_ a low allocation to be performed.
In this case, `high_head` is NULL, and the comparison
`MP_STATE_VM(first_embedded_allocation) < high_head` would fail.

Closes: #4871
2021-06-10 11:10:27 -05:00
Dan Halbert 95cbf3faa5 handle CIRCUITPY_USB_CDC = 0 properly (fix simmel build) 2021-06-02 15:27:20 -04:00
Dan Halbert 3930440bc5 Fix usb_cdc.enable(console=False, data=True) 2021-06-02 11:29:56 -04:00
Jeff Epler b0dd0e344c
Merge pull request #4772 from EmergReanimator/atmel-samd
[resolves #4771] DEBUG UART supported on ATMSAME5x
2021-05-28 20:05:06 -06:00
Scott Shawcroft 20946d97a1
Merge pull request #4743 from tannewt/simplify_status_led
Simplify the status LED to save power
2021-05-21 10:55:11 -07:00
Neradoc a8b6232402 don't print out "hard crash" when USER_SAFE_MODE demanded 2021-05-20 21:23:25 +02:00
Scott Shawcroft 5643355e90
Merge remote-tracking branch 'adafruit/main' into simplify_status_led 2021-05-20 08:35:15 -07:00
Scott Shawcroft 499a4388cf
Handle inverted neopixel power 2021-05-19 17:29:02 -07:00
Scott Shawcroft 642fbcf87a
Handle status led power
This no longer turns on status LED power before running user code.
Therefore, use of the status LED on some boards will also have to
enable the power.
2021-05-19 10:57:14 -07:00
Scott Shawcroft 9dabe882f1
Fix safe mode on rp2040 2021-05-19 10:18:43 -07:00
EmergReanimator 2b64b1d335 [resolves #4771] DEBUG UART supported on ATMSAME5x 2021-05-17 21:22:24 +02:00
Dan Halbert fa6c06fb38 count in/out endpoints; allow more usb modules on low-endpoint boards 2021-05-13 21:59:02 -04:00
Scott Shawcroft 1a0b4193b7
Simplify the status LED to save power
This also removes the need to pin share because we don't use the
status LED while user code is running.

The status flashes fallback to the HW_STATUS LED if no RGB LED is
present. Each status has a unique blink pattern as well.

One caveat is the REPL state. In order to not pin share, we set the
RGB color once. PWM and single color will be shutoff immediately but
DotStars and NeoPixels will hold the color until the user overrides
it.

Fixes #4133
2021-05-13 14:41:20 -07:00
Dan Halbert 0651ef17dd Fix endpoint checking; Clean up safe mode printing. 2021-05-12 15:53:52 -04:00
Scott Shawcroft 4eb4f14840
Merge pull request #4734 from dhalbert/dynamic-usb-fixes
fix HID; fix interface name table creation
2021-05-10 12:55:29 -07:00
Dan Halbert f504af3127 fix HID; fix interface name table creation 2021-05-09 00:42:45 -04:00