Commit Graph

26 Commits

Author SHA1 Message Date
Jim Mussared 62fd450e62 drivers/neopixel: Add common machine.bitstream-based neopixel module.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-08-19 22:50:32 +10:00
Jim Mussared 39e9c0788f esp8266: Replace esp.neopixel with machine.bitstream.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-08-19 22:50:32 +10:00
Michael Weiss b3a34dde36 esp32,esp8266: Add __len__ to NeoPixel driver to support iterating.
Signed-off-by: mishafarms <github@mishafarms.us>
2021-06-22 16:33:55 +10:00
Damien George c7aaee2b2b esp8266/modules: Fix fs_corrupted() to use start_sec not START_SEC.
START_SEC was changed in e0905e85a7.

Also, update the error message to mention how to format the partition at
the REPL, and make the total message shorter to save a bit of flash.

Signed-off-by: Damien George <damien@micropython.org>
2021-02-09 10:46:07 +11:00
Christopher Tse 5c37e76e4f esp8266/modules/neopixel.py: Add timing param to NeoPixel constructor.
This matches the esp32 port.
2021-01-30 14:35:54 +11:00
robert 5af3c046c7 esp32,esp8266: Remove "FAT" from warning message in inisetup.py.
Because FAT is not any more the only filesystem used.
2020-11-18 16:26:19 +11:00
Damien George bd7af6151d ports: Add utime.gmtime() function.
To portably get the Epoch.  This is simply aliased to localtime() on ports
that are not timezone aware.

Signed-off-by: Damien George <damien@micropython.org>
2020-09-18 16:25:36 +10:00
Damien George e0905e85a7 esp8266: Change from FAT to littlefs v2 as default filesystem.
This commit changes the esp8266 boards to use littlefs v2 as the
filesystem, rather than FAT.  Since the esp8266 doesn't expose the
filesystem to the PC over USB there's no strong reason to keep it as FAT.
Littlefs is smaller in code size, is more efficient in use of flash to
store data, is resilient over power failure, and using it saves about 4k of
heap RAM, which can now be used for other things.

This is a backwards incompatible change because all existing esp8266 boards
will need to update their filesystem after installing new firmware (eg
backup old files, install firmware, restore files to new filesystem).

As part of this commit the memory layout of the default board (GENERIC) has
changed.  It now allocates all 1M of memory-mapped flash to the firmware,
so the filesystem area starts at the 2M point.  This is done to allow more
frozen bytecode to be stored in the 1M of memory-mapped flash.  This
requires an esp8266 module with 2M or more of flash to work, so a new board
called GENERIC_1M is added which has the old memory-mapping (but still
changed to use littlefs for the filesystem).

In summary there are now 3 esp8266 board definitions:
- GENERIC_512K: for 512k modules, doesn't have a filesystem.
- GENERIC_1M: for 1M modules, 572k for firmware+frozen code, 396k for
  filesystem (littlefs).
- GENERIC: for 2M (or greater) modules, 968k for firmware+frozen code,
  1M+ for filesystem (littlefs), FAT driver also included in firmware for
  use on, eg, external SD cards.
2020-04-04 16:30:36 +11:00
Damien George 69661f3343 all: Reformat C and Python source code with tools/codeformat.py.
This is run with uncrustify 0.70.1, and black 19.10b0.
2020-02-28 10:33:03 +11:00
Damien George e3ff52863b esp8266/modules/ntptime.py: Add comment about configuring NTP host.
The ability to change the host is a frequently requested feature, so
explicitly document how it can be achieved using the existing code.

See issues #2121, #4385, #4622, #5122, #5536.
2020-01-31 23:54:11 +11:00
JensDiemer c14ff6194c esp8266/modules: Fix AttributeError in _boot.py if flash not formatted.
Prior to this commit, if the flash filesystem was not formatted then it
would error: "AttributeError: 'FlashBdev' object has no attribute 'mount'".
That is due to it not being able to detect the filesystem on the block
device and just trying to mount the block device directly.

This commit fixes the issue by just catching all exceptions.  Also it's not
needed to try the mount if `flashbdev.bdev` is None.
2020-01-14 23:53:49 +11:00
Jim Mussared 7ce1e0b1dc extmod/webrepl: Move webrepl scripts to common place and use manifest.
Move webrepl support code from ports/esp8266/modules into extmod/webrepl
(to be alongside extmod/modwebrepl.c), and use frozen manifests to include
it in the build on esp8266 and esp32.

A small modification is made to webrepl.py to make it work on non-ESP
ports, i.e. don't call dupterm_notify if not available.
2019-12-20 12:59:13 +11:00
Damien George 6eee5413ff esp8266/modules/flashbdev.py: Support extended block protocol. 2019-11-07 18:43:37 +11:00
Damien George cfe1c5abf8 extmod/vfs: Rename BP_IOCTL_xxx constants to MP_BLOCKDEV_IOCTL_xxx.
Also rename SEC_COUNT to BLOCK_COUNT and SEC_SIZE to BLOCK_SIZE.
2019-10-29 14:17:29 +11:00
Damien George 2fd3f2520d esp8266: Convert to use FROZEN_MANIFEST to specify frozen code.
Removes symlinks in modules directory, all frozen code is now specified by
manifest.py.
2019-10-15 21:36:02 +11:00
Damien George 79ab82ea77 esp8266/modules/ntptime.py: Always close socket, and set day-of-week.
Fixes issue #5189.
2019-10-10 18:05:56 +11:00
Yonatan Goldschmidt bc4f8b438b extmod/moduwebsocket: Refactor `websocket` to `uwebsocket`.
As mentioned in #4450, `websocket` was experimental with a single intended
user, `webrepl`. Therefore, we'll make this change without a weak
link `websocket` -> `uwebsocket`.
2019-02-14 00:35:45 +11:00
Damien George 36808d4e6a esp8266/main: Activate UART(0) on dupterm for REPL before boot.py runs.
So that the user can explicitly deactivate UART(0) if needed.  See
issue #4314.

This introduces some risk to "brick" the device, if the user disables the
REPL without providing an alternative REPL (eg WebREPL), or any way to
reenable it.  In such a case the device needs to be erased and
reprogrammed.  This seems unavoidable, given the desire to have the option
to use the UART for something other than the REPL.
2019-01-16 17:24:23 +11:00
Damien George aace60a75e esp8266/modules/ntptime.py: Remove print of newly-set time.
It should be up to the user if they want to print the new time out or not.

Fixes issue #3766.
2018-06-05 14:30:35 +10:00
Damien George afd0701bf7 esp8266: Change UART(0) to attach to REPL via uos.dupterm interface.
This patch makes it so that UART(0) can by dynamically attached to and
detached from the REPL by using the uos.dupterm function.  Since WebREPL
uses dupterm slot 0 the UART uses dupterm slot 1 (a slot which is newly
introduced by this patch).  UART(0) must now be attached manually in
boot.py (or otherwise) and inisetup.py is changed to provide code to do
this.  For example, to attach use:

    import uos, machine
    uart = machine.UART(0, 115200)
    uos.dupterm(uart, 1)

and to detach use:

    uos.dupterm(None, 1)

When attached, all incoming chars on UART(0) go straight to stdin so
uart.read() will always return None.  Use sys.stdin.read() if it's needed
to read characters from the UART(0) while it's also used for the REPL (or
detach, read, then reattach).  When detached the UART(0) can be used for
other purposes.

If there are no objects in any of the dupterm slots when the REPL is
started (on hard or soft reset) then UART(0) is automatically attached.
Without this, the only way to recover a board without a REPL would be to
completely erase and reflash (which would install the default boot.py which
attaches the REPL).
2018-05-21 11:31:59 +10:00
Damien George a40ce1d829 esp8266/modules: Move dht.py driver to drivers/dht directory. 2018-01-31 18:11:06 +11:00
Damien George 4e056d82cc esp8266/modules/webrepl_setup: Fix first-time enable of WebREPL.
Prior to this fix, enabling WebREPL for the first time via webrepl_setup
did not work at all because "boot.py" did not contain any lines with
"webrepl" in them that could be uncommented.
2017-11-30 10:54:33 +11:00
Damien George 37282f8fc1 extmod/uos_dupterm: Update uos.dupterm() and helper funcs to have index.
The uos.dupterm() signature and behaviour is updated to reflect the latest
enhancements in the docs.  It has minor backwards incompatibility in that
it no longer accepts zero arguments.

The dupterm_rx helper function is moved from esp8266 to extmod and
generalised to support multiple dupterm slots.

A port can specify multiple slots by defining the MICROPY_PY_OS_DUPTERM
config macro to an integer, being the number of slots it wants to have;
0 means to disable the dupterm feature altogether.

The unix and esp8266 ports are updated to work with the new interface and
are otherwise unchanged with respect to functionality.
2017-10-13 20:01:57 +11:00
Vitor Massaru Iha 1b7d6a7951 esp8266/modules/webrepl_setup: Add info about allowed password length.
This patch also makes the code more concise by combining the checks for the
password length.
2017-10-11 11:37:01 +11:00
Damien George 4a93801c12 all: Update Makefiles and others to build with new ports/ dir layout.
Also renames "stmhal" to "stm32" in documentation and everywhere else.
2017-09-06 14:09:13 +10:00
Damien George 01dd7804b8 ports: Make new ports/ sub-directory and move all ports there.
This is to keep the top-level directory clean, to make it clear what is
core and what is a port, and to allow the repository to grow with new ports
in a sustainable way.
2017-09-06 13:40:51 +10:00