Commit Graph

46 Commits

Author SHA1 Message Date
Philip Potter eb239b8398 stmhal/usb: Add support to receive USB HID messages from host. 2016-10-04 15:38:01 +11:00
Paul Sokolovsky 07209f8592 all: Rename mp_obj_type_t::stream_p to protocol.
It's now used for more than just stream protocol (e.g. pin protocol), so
don't use false names.
2016-06-18 18:44:57 +03:00
Damien George 5ab98d5c41 stmhal: Convert to use internal errno symbols; enable uerrno module. 2016-05-10 23:30:39 +01:00
Damien George 5b3f0b7f39 py: Change first arg of type.make_new from mp_obj_t to mp_obj_type_t*.
The first argument to the type.make_new method is naturally a uPy type,
and all uses of this argument cast it directly to a pointer to a type
structure.  So it makes sense to just have it a pointer to a type from
the very beginning (and a const pointer at that).  This patch makes
such a change, and removes all unnecessary casting to/from mp_obj_t.
2016-01-11 00:49:27 +00:00
Dave Hylands 8c936edeb2 stmhal: Fix USB on the STM32F429DISC board
The USB REPL has been broken since commit 1be0fde45c
This patch allows the STM32F429DISC board (which uses the USB_HS PHY)
2015-12-30 23:36:41 -08:00
neilh10 1be0fde45c stmhal: Enable two USB phys to be supported together.
This is refactoring to enable support for the two USB PHYs available on
some STM32F4 processors to be used at the same time. The F405/7 & F429
have two USB PHYs, others such as the F411 only have one PHY.

This has been tested separately on a pyb10 (USB_FS PHY) and F429DISC
(USB_HS PHY) to be able to invoke a REPL/USB.  I have modified a PYBV10
to support two PHYs.

The long term objective is to support a 2nd USB PHY to be brought up as a
USB HOST, and possibly a single USB PHY to be OTG.
2015-12-09 09:56:36 +00:00
Damien George 79f404a287 stmhal: Fix USB_VCP.recv so that it returns actual amount of bytes read.
Addresses issue #1529.
2015-10-25 21:43:07 +00:00
Paul Sokolovsky 1b586f3a73 py: Rename MP_BOOL() to mp_obj_new_bool() for consistency in naming. 2015-10-11 15:18:15 +03:00
Dave Hylands 01d64914c5 stmhal: Fix USB CDC-only mode under Windows.
This fix adds PIDs 9801 and 9802 to the pybcdc.inf file.

When in CDC only mode, it presents itself as a Communcations
device rather than as a composite device. Presenting as a
composite device with only the CDC interface seems to confuse
windows.

To test and make sure that the correct pybcdc.inf was being used,
I used USBDeview from http://www.nirsoft.net/utils/usb_devices_view.html
to uninstall any old pyboard drivers (Use Control-F and search
for pyboard). I found running USBDeview as administrator worked best.

Installing the driver in CDC+MSC mode first is recommended (since the
pybcdc.inf file in on the internal flash drive). Then when you switch
modes everything seems to work properly.

I used https://github.com/dhylands/upy-examples/blob/master/boot_switch.py
to easily switch the pyboard between the various USB modes for testing.
2015-10-09 00:18:01 +01:00
Tony Abboud 8d8fdcb4be stmhal: add option to query for the current usb mode
Fetch the current usb mode and return a string representation when
pyb.usb_mode() is called with no args. The possible string values are interned
as qstr's. None will be returned if an incorrect mode is set.
2015-09-03 23:30:43 +01:00
Damien George 1511dd4f84 stmhal: Add readinto and readlines methods to sys.stdin, pyb.USB_VCP().
Addresses issue #1255.
2015-05-13 20:22:11 +01:00
Damien George 7f9d1d6ab9 py: Overhaul and simplify printf/pfenv mechanism.
Previous to this patch the printing mechanism was a bit of a tangled
mess.  This patch attempts to consolidate printing into one interface.

All (non-debug) printing now uses the mp_print* family of functions,
mainly mp_printf.  All these functions take an mp_print_t structure as
their first argument, and this structure defines the printing backend
through the "print_strn" function of said structure.

Printing from the uPy core can reach the platform-defined print code via
two paths: either through mp_sys_stdout_obj (defined pert port) in
conjunction with mp_stream_write; or through the mp_plat_print structure
which uses the MP_PLAT_PRINT_STRN macro to define how string are printed
on the platform.  The former is only used when MICROPY_PY_IO is defined.

With this new scheme printing is generally more efficient (less layers
to go through, less arguments to pass), and, given an mp_print_t*
structure, one can call mp_print_str for efficiency instead of
mp_printf("%s", ...).  Code size is also reduced by around 200 bytes on
Thumb2 archs.
2015-04-16 14:30:16 +00:00
Damien George b1f68685ec stmhal: In USB HID driver, make polling interval configurable.
When setting usb_mode to "HID", hid config object now has
polling-interval (in ms) as the 4th element.  It mmust now be a 5-tuple
of the form:

(subclass, protocol, max_packet_len, polling_interval, report_desc)

The mouse and keyboard defaults have polling interval at 8ms.
2015-04-13 16:59:05 +01:00
Damien George 55d6218b9a stmhal: Properly define pyb.usb_mode() semantics. 2015-02-13 14:02:51 +00:00
Damien George 39ce2db181 stmhal: Add "CDC" option to pyb.usb_mode, for CDC device only. 2015-02-13 14:02:51 +00:00
Damien George d39c7aa517 stmhal: Add Python-configurable USB HID mode.
Different HID modes can be configured in Python.  You can either use
predefined mouse or keyboard, or write your own report descriptor.
2015-02-13 14:02:51 +00:00
Damien George 05005f679e py: Remove mp_obj_str_builder and use vstr instead.
With this patch str/bytes construction is streamlined.  Always use a
vstr to build a str/bytes object.  If the size is known beforehand then
use vstr_init_len to allocate only required memory.  Otherwise use
vstr_init and the vstr will grow as needed.  Then use
mp_obj_new_str_from_vstr to create a str/bytes object using the vstr
memory.

Saves code ROM: 68 bytes on stmhal, 108 bytes on bare-arm, and 336 bytes
on unix x64.
2015-01-21 23:18:02 +00:00
Damien George 3b51b3e90f stmhal: Collect all root pointers together in 1 place.
A GC in stmhal port now only scans true root pointers, not entire BSS.
This reduces base GC time from 1700ms to 900ms.
2015-01-07 23:38:50 +00:00
Damien George 2cf6dfa280 stmhal: Prefix includes with py/; remove need for -I../py. 2015-01-01 21:06:20 +00:00
Damien George 19fb1b4dd7 stmhal: Add USB_VCP.setinterrupt method, to disable CTRL-C. 2014-11-29 15:23:21 +00:00
Damien George 5cbc9e0db0 stmhal: Reduce coupling between USB driver and readline.
This makes it easier to re-use readline.c and pyexec.c from stmhal in
other ports.
2014-11-27 16:58:31 +00:00
Paul Sokolovsky f4a6a577ab stream: Convert .ioctl() to take fixed number of args.
This is more efficient, as allows to use register calling convention.
If needed, a structure pointer can be passed as argument to pass more
data.
2014-11-17 00:16:14 +02:00
Damien George 9a41b32b3f stmhal: Add ioctl to USB_VCP object, so it works with select.
This patch also enables non-blocking streams on stmhal port.

One can now make a USB-UART pass-through function:

def pass_through(usb, uart):
    while True:
        select.select([usb, uart], [], [])
        if usb.any():
            uart.write(usb.read(256))
        if uart.any():
            usb.write(uart.read(256))

pass_through(pyb.USB_VCP(), pyb.UART(1, 9600))
2014-10-31 00:12:02 +00:00
Damien George 124df6f8d0 py: Add mp_pending_exception global variable, for VM soft interrupt.
This allows to implement KeyboardInterrupt on unix, and a much safer
ctrl-C in stmhal port.  First ctrl-C is a soft one, with hope that VM
will notice it; second ctrl-C is a hard one that kills anything (for
both unix and stmhal).

One needs to check for a pending exception in the VM only for jump
opcodes.  Others can't produce an infinite loop (infinite recursion is
caught by stack check).
2014-10-25 23:37:57 +01:00
Damien George d7353fe6fe stmhal: Change USB PID when in CDC+HID mode.
This gets CDC+HID working on Windows, since it needs a different PID for
a different USB configuration.

Thanks to tmbinc and dhylands.
2014-10-25 22:55:07 +01:00
Damien George ecc88e949c Change some parts of the core API to use mp_uint_t instead of uint/int.
Addressing issue #50, still some way to go yet.
2014-08-30 00:35:11 +01:00
Damien George 3bb7efc943 stmhal: Hookup USB_VCP.any().
Thanks to Dave Hylands for this patch.
2014-08-26 14:18:22 +01:00
Damien George ccacdf44b6 stmhal: Clean up reset/soft-reset code; fix bug init'ing VCP exc.
Make a clearer distinction between init functions that must be done
before any scripts can run (xxx_init0) and those that can be safely
deferred (xxx_init).

Fix bug initialising USB VCP exception.  Addresses issue #788.

Re-order some init function to improve reliability of
reset/soft-reset.
2014-08-04 11:09:51 +01:00
Damien George 2e41646eb7 stmhal: Add more documentation for USB_VCP. 2014-08-02 14:43:20 +01:00
Damien George 87bbb388db stmhal: Add documentation for LCD; update docs for USB_VCP. 2014-08-02 14:35:38 +01:00
Damien George 3c4db9f91c stmhal: Add USB_VCP class/object, for direct USB VCP control.
Before, pyb.stdin/pyb.stdout allowed some kind of access to the USB VCP
device, but it was basic access.

This patch adds a proper USB_VCP class and object with much more control
over the USB VCP device.  Create an object with pyb.USB_VCP(), then use
this object as if it were a UART object.  It has send, recv, read,
write, and other methods.  send and recv allow a timeout to be specified.

Addresses issue 774.
2014-07-31 10:30:42 +01:00
Damien George 951ed9d02f stmhal: Fix REPL printing by cooking output sent to stdout_obj.
Recent changes to builtin print meant that print was printing to the
mp_sys_stdout_obj, which was sending data raw to the USB CDC device.
The data should be cooked so that \n turns into \r\n.
2014-07-20 13:57:43 +01:00
Damien George 34ab8dd6dd stmhal: Update and improve LCD driver.
Still some method names to iron out, and funtionality to add, but this
will do for the first, basic version.
2014-06-15 00:41:47 +01:00
Damien George 6d197740cf stmhal: Stop USB before entering DFU by software. 2014-05-21 19:25:34 +01:00
Damien George 04b9147e15 Add license header to (almost) all files.
Blanket wide to all .c and .h files.  Some files originating from ST are
difficult to deal with (license wise) so it was left out of those.

Also merged modpyb.h, modos.h, modstm.h and modtime.h in stmhal/.
2014-05-03 23:27:38 +01:00
Damien George 82c7b1b1d5 stmhal: Put a USB structure in ROM; GC doesn't scan the data segment. 2014-04-12 18:50:20 +01:00
Damien George 09d207785c stmhal: Unify naming of HW config; make SD detect configurable.
All board config macros now begin with MICROPY_HW_.

Renamed PYBv10 to PYBV10, since macros should be all uppercase.

Made SDCARD_DETECT configurable in mpconfigport.h, so that the SD
detect pin can be easily configured.
2014-03-30 12:30:35 +01:00
Damien George 038df43183 stmhal: Implement selector for USB device mode; improve boot up.
Can now choose at boot up whether the USB device is CDC+MSC or CDC+HID.
Choice is made by an option in boot.py, with default being CDC+MSC.
HID+MSC is not currently supported, but should be easy to implement.

Boot up now has ability to change the reset mode: hold down USR switch
while booting and LEDs will count from 1 to 7 to indicate the boot mode.
Release USR when correct mode is selected.  Current modes are 1 (normal
boot), 2 (safe mode), 3 (reset FS mode).
2014-03-30 00:00:15 +00:00
Damien George 64563e39b3 stmhal: Add CDC+HID USB device.
The HID device must appear before the CDC in order for both to work at
the same time.

Whilst the code is working, it's not currently used.
2014-03-29 21:57:30 +00:00
Damien George 2fb37847a7 stmhal: Tidy up USB CDC+MSC device some more. 2014-03-22 13:21:58 +00:00
Damien George fb25c2d95f stmhal: USB CDC and MSC device work together. 2014-03-22 12:32:54 +00:00
Damien George 8913c04831 stmhal: Add support for USB MSC device.
This gives a functioning, independent MSC device.
2014-03-21 23:32:01 +00:00
Damien George 6c2455f481 stmhal: Put an array in ROM. 2014-03-15 14:46:35 +00:00
Damien George 07174c6fca stmhal: Fix escape sequences in USB CDC input. 2014-03-15 12:53:51 +00:00
Damien George e285511a23 stmhal: Get USB CDC REPL working.
New USB HAL is quite a bit improved over previous one.  Now has better
callbacks and flow control.

REPL over USB CDC now works as before, except for soft-reset (since USB
driver uses malloc...).
2014-03-15 11:52:29 +00:00
Damien George b30c02afa0 stmhal: Get USB enumerating a CDC device.
Enumerates CDC device over USB, but doesn't transmit/receive yet.
2014-03-14 00:30:37 +00:00