8b147ac748
Add SD_CS pin to Metro ESP32-S3 board definition.
2023-08-15 18:30:59 -04:00
7567f71709
Merge pull request #8280 from dglaude/8.2.x-backport-metro-esp32s3
...
8.2.x backport metro esp32s3
2023-08-14 11:50:41 -07:00
9d69ddc583
Add D0 and D1
2023-08-14 00:20:47 +02:00
4c62db2d05
Add D pins
2023-08-14 00:20:24 +02:00
8dd52430b6
Change to octal ram
2023-08-14 00:18:50 +02:00
1b3993a29e
Added initial Adafruit Metro ESP32-S3
2023-08-14 00:17:24 +02:00
acd8896094
Fix RGB/BGR color order
2023-08-13 17:42:23 +02:00
2819c88207
Formatting
2023-08-13 17:41:16 +02:00
d652c8d25c
Add PicoPad support
2023-08-13 17:39:59 +02:00
ae0ebfef2f
ESP32 synthio channels to 12
2023-07-24 23:03:34 -04:00
c22a31e023
Merge pull request #8194 from dhalbert/8.2.x-backport-8035-8181-metro-rp2040
...
8.2.x backport 8035 8181 metro rp2040
2023-07-24 10:10:53 -07:00
70d7b6ffb7
Merge pull request #8196 from dhalbert/8.2.x-backport-8127-metro-m1011-sd
...
8.2.x backport: add Adafruit Metro M7 1011 SD
2023-07-24 10:10:15 -07:00
03c1cde918
Merge pull request #8204 from dhalbert/8.2.x-backport-8156-datanoise-picoadk
...
8.2.x backport 8156 datanoise picoadk
2023-07-24 10:07:32 -07:00
2a99ec3fc3
Merge pull request #8203 from dhalbert/8.2.x-backport-8154-keebs-frood
...
8.2.x backport: Update 42. Keebs Frood support for Rev7
2023-07-24 09:49:38 -07:00
818bd8f043
Merge pull request #8202 from dhalbert/8.2.x-backport-8152-liatris-board
...
8.2.x backport 8152 liatris board
2023-07-24 09:49:11 -07:00
f902e0d86b
Merge pull request #8201 from dhalbert/8.2.x-backport-8150-set-hostname
...
8.2.x backport: fix set hostname
2023-07-24 09:48:33 -07:00
99347aee1e
Merge pull request #8200 from dhalbert/8.2.x-backport-8142-makerdiary-nrf52840-connect
...
8.2.x backport: Added Makerdiary nRF52840 Connect Kit.
2023-07-24 09:48:11 -07:00
eebff5cb77
Merge pull request #8198 from dhalbert/8.2.x-backport-8130-qtpy-esp32s3-m4r2
...
8.2.x backport: adafruit_qtpy_esp32s3_4mbflash_2mbpsram
2023-07-24 09:47:47 -07:00
b901063eea
Merge pull request #8197 from dhalbert/8.2.x-backport-8129-s3-box-psram
...
8.2.x backport: Fix PSRAM on espressif ESP32S3 box and box lite
2023-07-24 09:46:42 -07:00
d84c69c056
Add NeoPixel Library for Datanoise PicoADK.
2023-07-23 12:14:13 -04:00
a4b4f57ff1
Add Datanoise PicoADK
2023-07-23 12:07:30 -04:00
b87ceb26aa
Add Datanoise PicoADK
2023-07-23 12:07:30 -04:00
df821bf22c
Update 42. Keebs Frood support for Rev7
2023-07-23 11:59:49 -04:00
317cab87a7
Add new board: splitkb.com's Liatris
2023-07-23 11:57:44 -04:00
b6d4488b31
fix set hostname
2023-07-23 11:56:05 -04:00
4dc9b0dde7
Added Makerdiary nRF52840 Connect Kit.
...
Signed-off-by: Zelin Cai <zelin@makerdiary.com>
2023-07-23 10:52:28 -04:00
97a8d71356
Swapped address pins for Rev C
2023-07-23 10:50:07 -04:00
66d0d95f23
adafruit_qtpy_esp32s3_4mbflash_2mbpsram
2023-07-23 10:47:37 -04:00
31aa9b2bb0
Fix PSRAM on espressif ESP32S3 box and box lite
2023-07-23 10:22:45 -04:00
311f6b0c79
add Adafruit Metro M7 1011 SD
2023-07-23 10:19:42 -04:00
9a9fe1240d
update metro rp2040 to work with 16MB flash
2023-07-23 10:05:54 -04:00
391bb1c45f
Add Adafruit Metro RP2040
2023-07-23 10:00:56 -04:00
4e01674cbd
Fix rp2 safe mode via reset press
...
The picodvi PR #7880 switched the saved word to the watchdog
register since it reworked the RAM layout. This works for
reset_into_safe_mode because the watchdog scratch registers are
preserved by soft resets. They *aren't* preserved for pressing the
reset button. So it broken manual safe mode. Switch back to using
RAM to store the saved word but use the pico-sdks "uninitialized"
designation instead of a fixed location.
Also fixes USB host feather status neopixel by setting the power
pin.
2023-07-13 14:49:08 -07:00
5dc2b168d7
Merge pull request #8123 from jepler/issue8121-workaround
...
rp2040: Avoid screeches due to audio underflow during flash writes
2023-06-27 09:09:03 -07:00
385366128f
Don't use "cookie" variable/function name
2023-06-27 09:59:02 -05:00
b4be2317cb
rp2040: Avoid screeches due to audio underflow during flash writes
...
By pausing audio during flash writes, the worst screeching of #8121
is avoided. I don't consider this a full fix, but it greatly improves
the by far most common scenario in which the problem occurs.
Tested on rp2040 prop feather with a midi synth playing arpeggios. When
writing to the flash e.g., with
```
dd bs=512 count=32 if=/dev/zero of=/media/jepler/CIRCUITPY/boop
```
the audio goes "tap tap tap tap" during the flash write instead of the
squawking.
This isn't a 100% fix; it will still glitch out, including during USB
enumeration which must be taking a long time without servicing background
tasks. Add a delay if not usb-connected at startup ameliorates this
greatly.
2023-06-26 10:34:29 -05:00
232e096f93
fix board.BUTTON on espressif_esp32c3_devkitm_1_n4
2023-06-25 17:05:49 +02:00
fde6342705
Revert "nrf: prevent I2C hangs"
2023-06-23 13:20:41 -04:00
ffebb5af8a
Merge pull request #8094 from furbrain/fix_i2c_hangs
...
Fix for #8093
2023-06-23 13:12:24 -04:00
540bf58102
improve start_ap() doc; make "authmode" use consistent internally
2023-06-22 16:24:18 -04:00
28b0e34d76
Merge pull request #8099 from strid3r21/main
...
added bee data logger
2023-06-21 09:52:26 -07:00
60adfa4e6b
Merge pull request #8089 from furbrain/main
...
Reset UART on deinit, reduces power consumption on nRF
2023-06-20 19:48:37 -04:00
9a2e9f7e41
added bee data logger
2023-06-20 18:50:15 -04:00
a753490899
Refactor out test for bus sanity state
2023-06-20 23:32:00 +01:00
9bce4ac30c
Merge pull request #8090 from kamtom480/sdk3.0.1
...
spresense: update SDK to 3.0.1
2023-06-20 13:11:45 -07:00
028a81922b
Remove unneeded #define from I2C.c
2023-06-20 13:36:12 +01:00
fae14cc55b
Fix for #8093
...
This adds a check to make sure that SDA and SCL are in a sane condition
before starting any I2C operation. If they are not it tries to rectify it,
and then returns an error code if unable to do so.
2023-06-19 22:20:46 +01:00
4bb475b930
formatting
2023-06-17 22:49:47 +01:00
ec1e7a03b3
Reset UART on deinit, reduces power consumption
2023-06-17 22:42:12 +01:00
7354e2ad03
fix `invalid pin` error when create `busio.SPI`
...
on specific SCK/MOSI/MISO pins, the `common_hal_busio_spi_construct`
method always skip miso pins which will lead to a `invalid pin`
exception when SPI initilized
2023-06-15 07:48:19 +08:00
Kattni Rembor
Scott Shawcroft
Melissa LeBlanc-Williams
Vladimír Smitka
Tod Kurt
Sylwester
Petr Sedlacek
Leah Post
MicroDev
Zelin Cai
Dan Halbert
Neradoc
Jeff Epler
Dan Halbert
paul
Phil Underwood
leosun