8479eef578
m0 tc and tcc work
2018-02-13 16:44:04 -08:00
6c3075bec6
m4 tc and tcc works. multi-tcc channels ok too.
2018-02-13 14:22:55 -08:00
cc616aea4e
m4 tc output works. Watch out for the PAC!
2018-02-12 23:41:26 -08:00
0397202288
m4 compiles, pwmout implemented but TC0 (A1) doesn't run
2018-02-09 17:21:06 -08:00
0398f308fa
m4 compiles, pwmout implemented
2018-02-09 16:37:27 -08:00
190e7d629e
WIP
2018-02-09 16:37:27 -08:00
e2d1e1e281
Merge pull request #610 from dhalbert/_etext_fix
...
Correct _etext location; clean up .ld files
2018-02-09 08:48:16 -08:00
b001c0711b
Correct _etext location; clean up .ld files
...
1. Make _extext and _sidata coincide. Old _etext location did not include
.ARM.exidx sections, which were usually absent but not always. So flash
data was copied to RAM in wrong place.
2. Use decimal constants with "K" and "M" suffixes in .ld files instead
of hex constants, to make them easier to read and check for accuracy.
2018-02-09 11:31:18 -05:00
6be6df6ae4
Merge pull request #609 from tannewt/bitbangio
...
Enable bitbangio now that we have digitalio.
2018-02-08 21:24:32 -05:00
af566e1135
Merge pull request #608 from tannewt/analog
...
ports/atmel-samd: Re-enable analogio
2018-02-08 21:23:07 -05:00
3e63f59867
Use write instead of set because it clears the bits before setting them.
2018-02-08 16:12:33 -08:00
aeae0090af
Enable bitbangio now that we have digitalio.
...
Also remove a rogue neopixel_write.
2018-02-08 16:03:05 -08:00
82bc11585e
ports/atmel-samd: Re-enable analogio
...
This introduces SAMD51 support and re-enables SAMD21 support.
Fixes #263
2018-02-08 14:48:08 -08:00
3e79638b9c
Merge pull request #603 from siddacious/SAMD51G_support
...
Added SAMD51G support as per issue #597
2018-02-08 09:55:48 -08:00
e5f0cfcf20
Merge pull request #604 from arturo182/nrf_bitbangio
...
nrf: Use the shared bitbangio module
2018-02-08 09:57:44 +01:00
dfc2b82ede
Added SAMD51G support as per issue #597
2018-02-07 21:23:25 -08:00
71128b575f
Merge pull request #602 from arturo182/nrf_struct
...
nrf: Use the shared struct module
2018-02-08 00:56:31 +01:00
9d191f7f9f
Merge pull request #589 from arturo182/nrf_gamepad
...
nrf: Implement ticks, add gamepad module and example
2018-02-07 22:17:05 +01:00
77c70c7e50
Merge pull request #598 from arturo182/comment_fix
...
shared-bindings: Fix incorrect code comments
2018-02-07 12:02:15 -08:00
afaee7f782
nrf: Use the shared bitbangio module
2018-02-07 00:03:23 +01:00
ff041caa52
shared-bindings: Fix incorrect code comments
...
Most likely caused by copy-paste.
2018-02-06 22:03:17 +01:00
243279fdc3
Merge pull request #592 from arturo182/nrf_analogout
...
nrf: Cleanup AnalogOut and throw an exception in constructor
2018-02-06 21:31:07 +01:00
021df5d3d3
nrf: Cleanup AnalogOut and throw an exception in constructor
...
The nRF MCUs do not support analog output. Throwing an exception
in the constructor will stop users from creating an instance of
the AnalogOut class.
In the future we can ifdef-out the whole class so it is not available
in the module at all.
2018-02-06 21:15:49 +01:00
6c5cb01b4a
Merge pull request #564 from deanm1278/master
...
DM: added write_readinto to bitbangio
2018-02-06 09:38:17 -08:00
c433a82082
Merge pull request #573 from arturo182/master
...
nRF port improvements and pca10056 support
2018-02-06 15:26:40 +01:00
c33db95066
Merge pull request #582 from arturo182/gen_docs_name
...
docs: Update the name of the projects in generated docs
2018-02-05 12:39:42 -08:00
668524b8e1
docs: Update the name of the projects in generated docs
2018-02-05 21:01:57 +01:00
d1b2f69771
nrf: Use the shared struct module
2018-02-05 20:50:06 +01:00
1de2ee6884
nrf: Implement ticks, add gamepad module and example
2018-02-05 20:48:25 +01:00
76f5c01798
nrf: Get the port working on pca10056 (nRF52840)
2018-02-05 20:38:41 +01:00
68309c3fac
replace tabs with spaces
2018-02-05 10:44:29 -05:00
f4018bd6b6
Merge pull request #575 from arturo182/nrf_led
...
nrf: Fix missing LED GPIO initialization
2018-02-04 22:51:03 -08:00
a64b5c84de
nrf: Fix missing LED GPIO initialization
...
led_init was never called, which means the GPIOs were never set to
output and the LEDs didn't work.
2018-02-03 13:51:11 +01:00
6731b47d5a
nrf: Implement MCU temperature reading
...
If softdevice is available and enabled the SD function will be used,
otherwise use MCU registers.
2018-02-02 20:33:21 +01:00
c6a542d166
nrf: Add SD 6.0.0-6.alpha to the download script
2018-02-02 20:31:47 +01:00
fed9087274
nrf: Add flash section for fatfs for no SD pca10056
2018-02-02 20:31:47 +01:00
616cbc6271
nrf: Use more generic header
...
It will include the mcu-specific header based on defines.
2018-02-02 20:31:47 +01:00
d0b451be94
nrf: Use the right SPI registers on nRF52840
2018-02-02 20:31:47 +01:00
a776c2a51c
nrf: Fix errorneous indent
...
Otherwise we get the "recipe commences before first target" messsage.
2018-02-02 20:31:47 +01:00
7c6adaa661
Merge pull request #567 from tannewt/ignore_docs_dir
...
Ignore docs directory when freezing as well.
2018-02-01 05:50:01 -08:00
737178e0d2
Ignore docs directory when freezing as well.
...
conf.py for Sphinx will be moved here.
2018-01-31 11:10:50 -08:00
0e13aba2fe
DM: fix sytling
2018-01-30 17:45:04 -05:00
d556ce291f
Merge pull request #563 from dhalbert/3.0_cpx_circuitpy_fail
...
CPX: typo in mpconfigboard.h broke CIRCUITPY
2018-01-30 14:42:00 -08:00
a7f72eb2d8
DM: added write_readinto to bitbangio
2018-01-30 17:18:57 -05:00
eb49359aec
CPX: typo in mpconfigboard.h broke CIRCUITPY
2018-01-30 15:48:22 -05:00
6085599963
Merge pull request #560 from dhalbert/3.0_issue_464_spi_baud_rate
...
Correct computation of SPI baud rate register value, and allow for the value to be 0.
2018-01-30 12:09:12 -08:00
cc87363234
documentation: caution on SPI clock speed for SAMD21
2018-01-30 14:31:20 -05:00
64831f4e7d
add SPI.frequency to nRF
2018-01-30 13:23:00 -05:00
e550b024c5
atmel-samd: Correct computation of SPI baud rate.
...
all: Add .frequency read-only property for busio.SPI to return actual frequency.
Fix esp8266/posix_helpers.c, which was not up to date for the new
long-lived/short-lived heap allocation scheme.
2018-01-30 12:08:41 -05:00
a1e279a9d8
Merge pull request #556 from python-ugame/ugame10-3.0
...
Update ugame port for the final ugame10 version
2018-01-29 13:35:06 -08:00
Scott Shawcroft
Scott Shawcroft
Dan Halbert
Kevin Townsend
Bryan Siepert
arturo182
dean