Commit Graph

13662 Commits

Author SHA1 Message Date
Philipp Ebensberger 84339aa8ec mimxrt/Makefile: Modify handling of SDCARD option.
Removes separate `if` case in Makefile for setting SDCARD option define.
2022-06-24 17:58:27 +10:00
Philipp Ebensberger b1aec393b1 mimxrt/Makefile: Modify handling of SDRAM option.
Replaces preprocessor macro for SDRAM option from #ifdef to #if in order to
allow always setting the define `MICROPY_HW_SDRAM_AVAIL` just with the
appropriate value 0/1.  This eliminates one `if` in the Makefile.
2022-06-24 17:58:27 +10:00
Philipp Ebensberger fbc50196ad mimxrt/Makefile: Refactor Makefile and divide it into sections.
Reworks grouping of Makefile variables and reorders variable values in
alphabetic order.
2022-06-24 17:58:25 +10:00
Damien George db7682e02d extmod/uasyncio: Implement stream read(-1) to read all data up to EOF.
Fixes issue #6355.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-24 17:04:57 +10:00
Damien George 2a2589738c tests/extmod: Add heap-lock test for stream writing.
Signed-off-by: Damien George <damien@micropython.org>
2022-06-24 17:00:24 +10:00
Thorsten von Eicken c21452a1d2 extmod/uasyncio: Attempt to write immediately in Stream.write method.
The main aim of this change is to reduce the number of heap allocations
when writing data to a stream.  This is done in two ways:

1. Eliminate appending of data when .write() is called multiple times
   before calling .drain().  With this commit, the data is written out
   immediately if the underlying stream is not blocked, so there is no
   accumulation of the data in a temporary buffer.

2. Eliminate copying of non-bytes objects passed to .write().  Prior to
   this commit, passing a bytearray or memoryview to .write() would always
   result in a copy of it being made and turned into a bytes object.  That
   won't happen now if the underlying stream is not blocked.

Also, this change makes .write () more closely implement the CPython
documented semantics: "The method attempts to write the data to the
underlying socket immediately.  If that fails, the data is queued in an
internal write buffer until it can be sent."
2022-06-24 17:00:24 +10:00
Christian Walther ba21f76f89 esp32/modesp32: Add wake_on_ulp() so ULP can wake CPU from deepsleep.
Add esp32.wake_on_ulp() to give access to esp_sleep_enable_ulp_wakeup(),
which is needed to allow the ULP co-processor to wake the main CPU from
deep sleep.
2022-06-23 17:31:01 +10:00
Christian Walther cf550ad9d1 esp32/boards: Increase 512 bytes limit on ULP programs to 2040.
Allow esp32.ULP.load_binary() to use the maximum amount of memory available
again, which is 2040 bytes unless MICROPY_HW_RTC_USER_MEM_MAX is
customized.

This value regressed in 3d49b157b8
2022-06-23 17:24:59 +10:00
robert-hh 5f4539b0ca esp32/machine_uart: Implement the functionality of timeout_char arg.
Using it for the rx-timeout.  The value is given as ms, which is then
converted to character times.  A value of less than a character time will
cause the rx call to return immediately after 1 character, which may be
inefficient at high transmission rates.

Addresses #8778.
2022-06-23 17:13:41 +10:00
iabdalkader 425d8fc0d6 nrf: Enable optional support for Arduino 1200bps touch.
Individual boards must enable it via MICROPY_HW_USB_CDC_1200BPS_TOUCH.
2022-06-23 14:33:40 +10:00
iabdalkader de823e7741 rp2/boards/ARDUINO_NANO_RP2040_CONNECT: Enable Arduino 1200bps touch. 2022-06-23 14:32:56 +10:00
iabdalkader 9f6f8b2fdd shared/runtime/tinyusb_helpers: Add TinyUSB helper functions.
Currently this file only includes a CDC jump-to-bootloader helper function.
2022-06-23 14:31:57 +10:00
iabdalkader 6c1495b5fe stm32/usbd_cdc_interface: Add support for Arduino 1200bps touch.
If the serial port is closed with baudrate at 1200 then the board will
enter its bootloader.
2022-06-23 14:30:07 +10:00
Damien George 226b2d77ee esp8266/mpconfigport: Disable MICROPY_PY_UTIMEQ.
This is no longer needed with new uasyncio v3, and disabling it saves 900
bytes.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-23 13:07:54 +10:00
Damien George ad7b98c829 esp8266/mpconfigport: Switch to ROM feature level configuration.
This is a no-op in terms of board configuration.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-23 13:07:39 +10:00
Damien George 627ba38154 py/parsenum: Optimise when building with complex disabled.
To reduce code size when MICROPY_PY_BUILTINS_COMPLEX is disabled.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-23 11:46:47 +10:00
Damien George 61ce260ff7 py/parsenum: Fix parsing of complex "j" and also "nanj", "infj".
Prior to this commit, complex("j") would return 0j, and complex("nanj")
would return nan+0j.  This commit makes sure "j" is tested for after
parsing the number (nan, inf or a decimal), and also supports the case of
"j" on its own.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-23 11:46:47 +10:00
Jim Mussared 0172292762 py/parsenum: Support parsing complex numbers of the form "a+bj".
To conform with CPython.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-06-23 11:46:47 +10:00
Luiz Brandao 7861eddd0f docs/library/uasyncio: Consistently use "uasyncio" instead of "asyncio". 2022-06-21 17:28:48 +10:00
Patrick Joy 3d58bb23c2 docs/library/machine: Add note on interrupts being critical to system. 2022-06-21 17:25:11 +10:00
Stewart C. Russell f12754af06 docs: Set LaTeX engine to XeLaTeX for PDF generation.
Also added to suggested packages list for PDF build.

See comment in Sphinx project for (some) details:
https://github.com/sphinx-doc/sphinx/pull/5693#pullrequestreview-180444650
2022-06-21 14:49:13 +10:00
Damien George 9175482f29 docs/library: Remove unnecessary "pyb." prefix on class names.
Otherwise these classes are refered to with a double prefix, like
pyb.pyb.ADC.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-21 14:33:23 +10:00
Howard Lovatt 89e1e67748 docs/library/pyb.Timer: Document `brk` argument and its constants. 2022-06-21 14:22:50 +10:00
David Lechner a565811f23 extmod/modbtree: Use buffer protocol for keys/values.
This changes the btree implementation to use the buffer protocol for
reading key/values in all methods.  `str` and `bytes` objects are not the
only bytes-like objects that could be used.

Documentation and tests are also updated.

Addresses issue #8748.

Signed-off-by: David Lechner <david@pybricks.com>
2022-06-21 00:44:49 +10:00
David Lechner c118b5d0e4 extmod/extmod.mk: Separate out extmod file list from py.mk to extmod.mk.
This separates extmod source files from `py.mk`.  Previously, `py.mk`
assumed that every consumer of the py/ directory also wanted to include
extmod/.  However, this is not the case.  For example, building mpy-cross
uses py/ but doesn't need extmod/.

This commit moves all extmod-specific items from `py.mk` to `extmod.mk` and
explicitly includes `extmod.mk` in ports that use it.

Signed-off-by: David Lechner <david@pybricks.com>
2022-06-21 00:14:34 +10:00
Damien George 4802b6d3af extmod/extmod.cmake: Only include modbtree in build if it's enabled.
Following how it's done in extmod.mk.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-20 23:37:38 +10:00
Damien George f5769698e5 extmod/modlwip: Clean up inclusion of modlwip in build process.
The following changes are made:

- Guard entire file with MICROPY_PY_LWIP, so it can be included in the
  build while still being disabled (for consistency with other extmod
  modules).

- Add modlwip.c to list of all extmod source in py/py.mk and
  extmod/extmod.cmake so all ports can easily use it.

- Move generic modlwip GIT_SUBMODULES build configuration code from
  ports/rp2/CMakeLists.txt to extmod/extmod.cmake, so it can be reused by
  other ports.

- Remove now unnecessary inclusion of modlwip.c in EXTMOD_SRC_C in esp8266
  port, and in SRC_QSTR in mimxrt port.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-20 23:37:38 +10:00
Damien George 1842efbdd9 stm32/Makefile: Set CSUPEROPT to -Os for F0 and G0 MCUs to save space.
Saves 1804 bytes on NUCLEO_F091RC, and 1080 bytes on NUCLEO_G0B1RE.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-20 23:37:38 +10:00
Damien George 5d3a0bb59c py/objcell: Make cell get/set funcs static-inline to reduce code size.
Change in code size is:

       bare-arm:   -36 -0.062%
    minimal x86:   -92 -0.056%
       unix x64:   -72 -0.014%
    unix nanbox:  -276 -0.060%
          stm32:    +0 +0.000% PYBV10
          stm32:   -40 +0.021% NUCLEO_L073RZ
         cc3200:   -16 -0.009%
        esp8266:  +176 +0.025% GENERIC
          esp32:   -28 -0.002% GENERIC
         mimxrt:   -56 -0.016% TEENSY40
     renesas-ra:    +0 +0.000% RA6M2_EK
            nrf:    +0 +0.000% pca10040
            rp2:   -64 -0.013% PICO
           samd:   -32 -0.023% ADAFRUIT_ITSYBITSY_M4_EXPRESS

Ports like stm32 that build the VM with -O3 have no change because the
savings from the inlining are offset by additional gcc performance
optimisations in the VM.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-20 23:37:38 +10:00
Damien George a506335524 py/emit: Suppress unreachable bytecode/native code that follows jump.
This new logic tracks when an unconditional jump/raise occurs in the
emitted code stream (bytecode or native machine code) and suppresses all
subsequent code, until a label is assigned.  This eliminates a lot of
cases of dead code, with relatively simple logic.

This commit combined with the previous one (that removed the existing
dead-code finding logic) has the following code size change:

       bare-arm:   -16 -0.028%
    minimal x86:   -60 -0.036%
       unix x64:  -368 -0.070%
    unix nanbox:   -80 -0.017%
          stm32:  -204 -0.052% PYBV10
         cc3200:    +0 +0.000%
        esp8266:  -232 -0.033% GENERIC
          esp32:  -224 -0.015% GENERIC[incl -40(data)]
         mimxrt:  -192 -0.054% TEENSY40
     renesas-ra:  -200 -0.032% RA6M2_EK
            nrf:   +28 +0.015% pca10040
            rp2:  -256 -0.050% PICO
           samd:   -12 -0.009% ADAFRUIT_ITSYBITSY_M4_EXPRESS

Signed-off-by: Damien George <damien@micropython.org>
2022-06-20 22:28:18 +10:00
Damien George e85a096302 py/emit: Remove logic to detect last-emit-was-return-value.
This optimisation to remove dead code is not as good as it could be.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-20 22:28:18 +10:00
Damien George 0db046b67b py/vm: Change comparison for finally handler search from > to >=.
The search in these cases should include all finally handlers that are
after the current ip.  If a handler starts at exactly ip then it is
considered "after" the ip.  This can happen when END_FINALLY is followed
immediately by a finally handler (from a different finally).

Consider the function:

    def f():
        try:
            return 0
        finally:
            print(1)

The current bytecode emitter generates the following code:

    00 SETUP_FINALLY 5
    02 LOAD_CONST_SMALL_INT 0
    03 RETURN_VALUE
    04 LOAD_CONST_NONE              ****
    05 LOAD_GLOBAL print
    07 LOAD_CONST_SMALL_INT 1
    08 CALL_FUNCTION n=1 nkw=0
    10 POP_TOP
    11 END_FINALLY
    12 LOAD_CONST_NONE
    13 RETURN_VALUE

The LOAD_CONST_NONE marked with **** is dead code because it follows a
RETURN_VALUE, and nothing jumps to this LOAD_CONST_NONE.  If the emitter
could remove this this dead code it would produce:

    00 SETUP_FINALLY 4
    02 LOAD_CONST_SMALL_INT 0
    03 RETURN_VALUE
    04 LOAD_GLOBAL print
    06 LOAD_CONST_SMALL_INT 1
    07 CALL_FUNCTION n=1 nkw=0
    09 POP_TOP
    10 END_FINALLY
    11 LOAD_CONST_NONE
    12 RETURN_VALUE

In this case the finally block (which starts at offset 4) immediately
follows the RETURN_VALUE.  When RETURN_VALUE executes ip will point to
offset 4 in the bytecode (because the dispatch of the opcode does *ip++)
and so the finally handler will only be found if a >= comparison is used.

It's a similar story for break/continue:

    while True:
        try:
            break
        finally:
            print(1)

Although technically in this case the > comparison still works because the
extra byte from the UNWIND_JUMP (encoding the number of exception handlers
to unwind) doesn't have a *ip++ (just a *ip) so ip remains pointing within
the UNWIND_JUMP opcode, and not at the start of the following finally
handler.  Nevertheless, the change is made to use >= for consistency with
the RETURN_VALUE change.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-20 22:28:18 +10:00
Jim Mussared 794773cdf2 github/ISSUE_TEMPLATE: Make minor improvements to placeholder text.
Move the "delete placeholder" to the end, so it's not the first thing the
reader does.  And add extra text calling out "how do I?" questions.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-06-20 22:25:52 +10:00
iabdalkader 6e868d47dc docs: Update to use new WLAN argument names for ssid/security/key.
Addresses issue #8083.
2022-06-17 21:43:44 +10:00
iabdalkader 82b8a2d193 esp8266/modnetwork: Rename WLAN keyword args to ssid/security/key.
The WLAN.config() method now supports "ssid", "security" and "key" as
aliases to the existing "essid", "authmode" and "password", which are now
deprecated.  The help text and setup helper are also updated.

Addresses issue #8083.
2022-06-17 21:43:44 +10:00
iabdalkader a7c7febe0b esp32/network_wlan: Rename WLAN keyword args to ssid/security/key.
The WLAN.config() method now supports "ssid", "security" and "key" as
aliases to the existing "essid", "authmode" and "password", which are now
deprecated.

Addresses issue #8083.
2022-06-17 21:43:44 +10:00
iabdalkader efa73ca833 extmod/network_ninaw10: Rename WLAN connect argument from essid to ssid.
Addresses issue #8083.
2022-06-17 21:43:44 +10:00
iabdalkader c502cf73e0 extmod/network_cyw43: Rename WLAN keyword args to ssid/security/key.
Rename WLAN keyword args to scan(), connect() and config() to be more
consistent across ports and WLAN drivers.  This change is backwards
compatible and will support obsolete keyword args, except for positional
"essid" which is now deprecated in favor of "ssid".

The changed argument names are
- "essid" changed to "ssid"
- "auth" or "authmode" changed to "security"
- "password" changed to "key"

Addresses issue #8083.
2022-06-17 21:43:25 +10:00
chrismas9 868f23b362 stm32/boards/NUCLEO_F091RC: Enable LFS1 filesystem.
And disable some less common features to make space for it.

Signed-off-by: Chris Mason <c.mason@inchipdesign.com.au>
2022-06-17 21:27:41 +10:00
chrismas9 fdbca3c143 stm32/boards/stm32f091xc.ld: Allocate space for a small filesystem.
Signed-off-by: Chris Mason <c.mason@inchipdesign.com.au>
2022-06-17 21:27:32 +10:00
David Lechner 17f0297c1a tools/ci.sh: Drop ppa requirement for code formatting CI.
The CI scripts were using a PPA to get a backported version of uncrustify
on Ubuntu 20.04.  However, this causes CI to intermittently fail due to
connection issues to launchpad.net or the key server.

Ubuntu 22.04 has a newer version of uncrustify removing the need for the
PPA.  Ubuntu 22.04 is now in beta on GitHub actions, so it can be used.

Signed-off-by: David Lechner <david@pybricks.com>
2022-06-17 16:56:41 +10:00
Maureen Helm bada8b3cad zephyr: Upgrade to Zephyr v3.1.0.
Updates the Zephyr port build instructions and CI to use the latest Zephyr
release tag.

Tested on frdm_k64f.

Signed-off-by: Maureen Helm <maureen.helm@intel.com>
2022-06-17 16:51:34 +10:00
Maureen Helm 4fd54a4756 zephyr: Update include paths to use the zephyr namespace.
Zephyr v3.1.0 moved all public headers to include/zephyr.

Signed-off-by: Maureen Helm <maureen.helm@intel.com>
2022-06-17 16:44:30 +10:00
Damien George 49c23ac08f renesas-ra/machine_i2c: Remove unnecessary start/stop dummy functions.
The code in extmod/machine_i2c.c will check for NULL slots and raise an
appropriate exception.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-17 14:58:42 +10:00
Damien George dea1ba3309 tools/metrics.py: Add mimxrt and renesas-ra to list of available ports.
Signed-off-by: Damien George <damien@micropython.org>
2022-06-17 14:57:58 +10:00
Damien George d8e7ecd231 stm32/modmachine: Factor out mboot enter code to a function.
Signed-off-by: Damien George <damien@micropython.org>
2022-06-17 13:57:47 +10:00
iabdalkader c5d26ee5e7 renesas-ra/modmachine: Allow boards to provide custom bootloader code.
And expose the machine_bootloader() C function so it can be used elsewhere.
2022-06-17 13:38:55 +10:00
iabdalkader f522aabab2 rp2/modmachine: Allow boards to provide custom bootloader code.
And expose the machine_bootloader() C function so it can be used elsewhere.
2022-06-17 13:38:21 +10:00
iabdalkader d8f5669532 nrf/modmachine: Add machine.bootloader() and make it customisable. 2022-06-17 13:37:44 +10:00
iabdalkader 0adf0dd3d7 stm32/modmachine: Allow boards to provide custom bootloader code.
And expose the machine_bootloader() C function so it can be used elsewhere.
2022-06-17 13:36:55 +10:00