409a4a9490
Disable the HID USB descriptor for Sol
...
It's not used and ends up being confusing for folks.
2020-03-04 23:22:46 -08:00
b4e1955526
Merge pull request #2583 from jepler/ulab
...
Add 'ulab' as an extmod; enable on nrf and most samd51 boards
2020-03-04 11:46:17 -08:00
4aec5d1e83
Merge pull request #2680 from hierophect/stm32-clock-hotfix
...
STM32: Fix restriction on GPIO clock enables for F407 Discovery board
2020-03-04 11:43:33 -08:00
da31acfcc4
Merge remote-tracking branch 'origin/master' into ulab
2020-03-03 20:13:53 -06:00
55e13715a9
Expand GPIO clock enables for F405 and F407
2020-03-03 17:21:47 -05:00
3178462218
Merge branch 'master' into stm32-pulseout
2020-03-03 15:03:19 -05:00
2fea811c30
Merge pull request #2672 from jepler/fuzz
...
Makefiles: add targets to build unix port, mpy-cross for fuzzing
2020-03-03 11:36:53 -08:00
17458ad81a
Merge pull request #2662 from jepler/issue2332
...
Fix unaligned disk reads properly
2020-03-03 11:27:50 -08:00
eb71bfe9d3
Exclude SoCs without basic timers
2020-03-02 11:22:40 -05:00
74bf17bb0d
Makefiles: add targets to build unix port, mpy-cross for fuzzing
...
This assumes you have properly install afl-fuzz with afl-clang-fast.
Tested with AFLplusplus 2.60c-75-g2c6847b.
2020-03-01 11:48:33 -06:00
dc64857a7d
Merge branch 'master' into ulab
2020-02-29 21:54:39 -06:00
611ef27ac2
stm32: Add PulseOut support
...
Matches the implementations of the NRF and Atmel ports. TIM7 is used as it does not have a tied pin. Contains some register micromanagement since HAL support for the TIM7 timer is limited.
2020-02-29 14:47:47 -05:00
0af00cf914
Freeze adafruit_requests and adafruit_esp32spi into feather_m7_1011
2020-02-29 00:39:22 +01:00
3f26a0b06b
Freeze adafruit_requests and adafruit_esp32spi into feather_mimxrt1011
2020-02-29 00:26:39 +01:00
eef742bf45
oofatfs: Remove _FS_DISK_READ_ALIGNED
...
This workaround is no longer needed, so it can be removed.
Closes : #2332
2020-02-28 10:04:28 -06:00
1e6c08fc30
nrf: sqpi_flash: Handle unaligned reads
2020-02-28 10:03:37 -06:00
fa3b9eba92
ulab: Incorporate it
2020-02-27 11:03:03 -06:00
4c710cf13b
unix port: add help(), help('modules')
2020-02-27 08:31:01 -06:00
09a3153bf4
Fix I2C clock divider
2020-02-27 14:08:39 +00:00
1b33cd11fc
Merge pull request #2658 from mubes/spi_fixes
...
Fix SPI clock speed on mimxrt10xx family & mimxrt1020 pinmux fixups
2020-02-26 16:37:05 +01:00
aadb0bfc1e
Fix SPI clock speed on mimxrt10xx family & mimxrt1020 pinmux fixup
2020-02-26 14:28:54 +00:00
86e9fd170a
move red LED to D13 and make D3 lsm6ds IRQ
2020-02-25 18:00:23 -05:00
f20255813f
samd51 thing plus: new port
...
testing performed:
* successfully store and retrieve a 500kB file on the flash
* square wave output on each pin appears on o'scope
* board.SPI(), board.SERIAL(), board.I2C() all construct
2020-02-25 11:52:23 -06:00
28c7a1e9c3
Fix crash after empty REPL session
...
We were trying to reset bluetooth when it was off and then trying
to raise an exception without the heap.
2020-02-24 16:11:17 -08:00
dcc8abf74e
Merge pull request #2638 from fgallaire/master
...
Arduino Nano 33 IoT support
2020-02-22 00:12:06 -05:00
96db16a7a2
Last NINA pins
2020-02-22 04:30:18 +01:00
f63b2c0d0c
use realloc instead
2020-02-21 17:36:15 -05:00
9cf46ec947
put neopixel_write buffer in root pointers
2020-02-21 08:44:25 -05:00
23d6a3dc1f
merge from upstream
2020-02-20 22:27:16 -05:00
39ec5d0e51
Add NINA pins
2020-02-21 01:34:52 +01:00
634d246910
relicense nrf SPI.c to MIT
2020-02-20 16:00:21 -05:00
1e7ec1b952
Merge pull request #2641 from arturo182/feather_m7_1011
...
mimxrt10xx: Add Feather M7 1011 board config
2020-02-20 10:15:57 -08:00
feac87901a
mimxrt10xx: Enable displayio
...
Closes #2466
2020-02-19 22:26:00 +01:00
aa0cf38084
mimxrt10xx: Add Feather M7 1011 board config
2020-02-19 22:08:08 +01:00
4552aff125
Merge pull request #2629 from mubes/rtsctsrs485
...
Addition of RTS/CTS/RS485 capability
2020-02-19 10:35:57 -08:00
fba0b302ff
Add Arduino Nano 33 IoT support
2020-02-19 08:56:06 +01:00
63bcd52a5a
Add Arduino Nano 33 IoT documentation
2020-02-19 08:50:27 +01:00
1f148242db
Merge pull request #2605 from maholli/master
...
New board: PyCubed + updates to SAM32 board
2020-02-18 22:01:41 -05:00
24405cabaf
Edits as a result of review
2020-02-19 00:07:01 +00:00
490a808bf6
Addition of stubs for rs485/CTS/RTS handling on non-implemented chips
2020-02-18 23:16:40 +00:00
f0e5341b0f
Addition of support for imxt1010, 1050 and 1060 families
2020-02-18 23:16:40 +00:00
d388899985
Addition of RS485 support
2020-02-18 23:16:40 +00:00
84ad3d8393
Addition of RTS/CTS/RS485 UART functionality
2020-02-18 23:16:40 +00:00
2b79d8ffe9
adding PWM to board.c for external WDT
2020-02-18 14:16:54 -08:00
2063867899
Merge pull request #2618 from mubes/alignment-warning
...
Fix alignment warning
2020-02-18 13:54:24 -08:00
93760042fa
no current need for NVM
2020-02-16 11:43:19 -08:00
77ad9aff3c
Formatting updates
2020-02-16 00:40:04 +00:00
d13f04f953
Updated formatting
2020-02-14 23:02:02 +00:00
dc97b0d844
correct chec^Cfor flash erase boundaries
2020-02-13 17:41:05 -05:00
e97b0cfc61
Merge pull request #2581 from jamesbowman/master
...
First draft of eveL, the low-level module of the Gameduino bindings
2020-02-13 11:21:32 -08:00
Thea Flowers
Scott Shawcroft
Jeff Epler
Lucian Copeland
Jeff Epler
arturo182
Jeff Epler
Dave Marples
ladyada
Scott Shawcroft
Dan Halbert
Florent Gallaire
Dan Halbert
Max Holliday