83439e38fc
8 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Damien George
|
1fe1ff935b | nrf: Clean up source by removing tabs, trailing spaces, non-ASCII chars. | ||
|
Damien George
|
6e30f96b0b | ports: Convert legacy uppercase macro names to lowercase. | ||
Ayke van Laethem
|
2f0f4fdcd3
|
nrf: Use mp_raise_ValueError instead of nlr_raise(...)
Saves 60 bytes on the nRF52 with SD disabled. There will be a bigger saving with SD enabled and/or on the micro:bit board. |
||
Glenn Ruben Bakke
|
7144e87ced |
nrf/bluetooth: Add support for s132/s140 v6, remove s132 v2/3/5
Support added for s132/s140 v6 in linker scripts and boards. Support removed for s132 v2/3/5. Download script updated to fetch new stacks and removed the non-supported ones. ble_drv.c updated to only handle s110 v8, and s132/s140 v6. ubluepy updated to continue scanning after each individual scan report reported to the module to keep old behaviour of the Scanner class. |
||
|
Glenn Ruben Bakke
|
6011441342 |
nrf: Move pyb module to boards module
Cleaning up use of "pyb" module. Moving the file to a new folder and updating the makefile accordingly. New module created called "board" to take over the functionality of the legacy "pyb" module. Updating outdated documentation referring to pyb.Pin, to now point to machine.Pin. |
||
|
glennrub
|
002f7d1ad7 |
nrf: Replace custom-HAL with nrfx-HAL
Summarized this squashed PR replaces the hal/ folder in the port. This has been replaced the official HAL layer from Nordic Semiconductor; https://github.com/NordicSemiconductor/nrfx. A Git submodule has been added under lib/nrfx, for the nrfx dependency. The drivers / modules has been updated to use this new HAL layer; nrfx at v1.0.0. Also, header files and system files for nrf51/nrf52x chip variants has been deleted from the device/ folder, only keeping back the startup files written in C. All other files are now fetched from nrfx. 3 new header files in the ports/nrf/ folder has been added to configure nrfx (nrfx_config.h), logging (nrfx_log.h) and glue nrfx together with the drivers and modules from micropython (nrfx_glue.h). The PR has been a joint effort from @aykevl (Ayke van Laethem) and @glennrub. For reference, the commit log will be kept to get an overview of the changes done: * ports/nrf: Initial commit for moving hal to Nordic Semiconductor BSD-3 licensed nrfx-hal. * ports/nrf: Adding nrfx, Nordic Semiconductor BSD-3 hal layer, as git submodule checked out at lib/nrfx. * ports/nrf/modules/machine/uart: Fixing bug which set hwfc to parity excluded, always resulting in no flow control, hence corrupted output. Also adding an extra loop on uart_tx_char to prevent any tx when any ongoing tx is in progress. * ports/nrf/i2c: Moving I2C over to nrfx driver. * ports/nrf/modules/machine/i2c: Alignment. Renaming print function param 'o' to 'self_in' * ports/nrf/spi: Updating SPI machine module to use nrfx drivers. * ports/nrf: Renaming modules/machine/rtc.c/.h to rtcounter.c/.h to not confuse the peripheral with Real-Time Clock: * ports/nrf: Updating various files after renaming machine module RTC to RTCounter. * ports/nrf: Renaming RTC to RTCounter in modmachine globals dict table. Also updating object type name to reflect new module name. * ports/nrf: Fixing leftovers after renaming rtc to rtcounter. * ports/nrf: Early untested adoption of nrfx_rtc in RTCounter. Untested. * nrf/modules/machine/i2c: Improve keyword argument handling * ports/nrf/modules/temp: Updating Temp machine module to use nrfx defined hal nrf_temp.h. Moving logic of BLE stack awareness to machine module. * ports/nrf/boards/pca10040: Enable machine Temp module. * nrf/modules/machine/rtcounter: Remove magic constants. * ports/nrf: Adding base support for nrfx module logging. Adding option to disable logging of UART as it might log its own setup over UART while the peripheral is not yet set up. Logging of UART could make sense if other transport of log is used. * ports/nrf: updating nrfx_log.h with more correct parenthisis on macro grouping. * ports/nrf: Updating nrfx logging with configuration to disable logging of UART module. The pattern can be used to turn off other modules as well. However, for now UART is the only module locking itself by logging before the peripheral is configured. Logging is turned off by default, can be enabled in nrfx_config.h by setting NRFX_LOG_ENABLED=1. * ports/nrf/modules/random: Updating modrandom to use nrfx hal for rng. Not using nrfx-driver for this peripheral as its blocking mode would do the trick on RNG. Moving softdevice aware code from legacy hal to modrandom.c. * nrf: Enable Peripheral Resource Sharing. This enables TWI and SPI to be enabled at the same time. * nrf/Makefile: Define MCU sub variant (e.g. NRF51822/NRF51422) * nrf: Port TIMER peripheral to nrfx HAL. * nrf/modules/machine/uart: Optimize UART module For a nRF51, this results in a size reduction of: .text: -68 bytes .data: -56 bytes * nrf/modules/machine/uart: Don't use magic index numbers. * nrf/modules/machine/uart: Fix off-by-one error. For nrf51: .text: -40 bytes * nrf/modules/machine/rtcounter: Update for nrfx HAL. * nrf/modules/machine/i2c: Reduce RAM consumption. Reductions for the nrf51: flash: -108 bytes RAM: -72 bytes * nrf/mpconfigport: Avoid unnecessary root pointers. This saves 92 bytes of RAM. * nrf: Support SoftDevice with nrfx HAL. * nrf: Add NVMC peripheral (microbitfs) support. There is no support yet for a SoftDevice. It also fixes a potentially serious bug in start_index generation. * nrf/modules/machine/spi: Optimize SPI peripheral. nrf51: text: -340 bytes data: -72 bytes nrf52: text: -352 bytes data: -108 bytes * nrf/modules/random: Forgot to commit header file. * nrf: Make nrfx_config.h universal for all boards. * nrf: Use SoftDevice API for flash access when built for SD * nrf/drivers/bluetooth: Remove legacy HAL driver includes. These were not used anymore so can be removed. * ports/nrf/microbit: Port microbit targets to nrfx HAL Initial port of microbit modules to use nrfx HAL layer. Tested display/image and modmusic on micro:bit to verify that softpwm and ticker for nrf51 is working as expected. Changing IRQ priority on timer to priority 2, as 1 might collide if used side by side of SD110 BLE stack. The patch reserves Timer1 peripheral compile time. This is not ideal and should be resolved in seperate task. * nrf/boards/microbit: Remove custom nrfx_config.h from microbit target, adding disablement of timer1 if softpwm is enabled. * nrf/adc: Update ADC module to use nrfx * nrf/modules/machine/pwm: Updating machine PWM module to use nrfx HAL driver. examples/nrf52_pwm.py and examples/nrf52_servo.py tested on pca10040. * nrf: Removing hal folder and boards nrf5x_hal_conf.h headers. * nrf/nrfx_glue: Adding direct NVIC access for S110 BLE stack If SoftDevice s110 has not yet been initialized, the IRQ will not be forwarded to the application using the sd_nvic* function calls. Hence, direct access to cmsi nvic functions are used instead if SoftDevice is not enabled. * nrf/drivers/ticker: Setting IRQ priority 3 on Timer1 SoftDevice fails to initilize if Timer1 has been configured to priority level 2 before enabling the SD. The timer is set to priority 1, higher than BLE stack in order to provide better quality of music rendering when used with the music module. This might be too high, time will show. * nrf/examples: Updating ubluepy_temp after moving RTCounter to nrfx. * nrf: delete duplicate files from device folder which can be located in nrfx/mdk. * nrf/Makefile: Fetch system files from nrfx. Testing on each device sub-variant to figure out which system file to use. Reason for this is that nrf52.c is actually defining nrf52832. Removing NRF_DEFINES parameter setting the device in use into the same sub-variant test, as NRF52 is unique to nrf52832 when using nrfx. Without this exclusion of -DNRF52 in compilation for nrf52840, the device will be interpreted as a nrf52, hence nrf52832. Also, changing name on variable SRC_NRF_HAL to SRC_NRFX_HAL to explicitly tell the origin of the file. * nrf: Updating device #ifdefs to be more open to non-nrf51 targets. * nrf/modules/machine/uart: Removing second instance of UART for nrf52840 as it only has one non-DMA variant. * nrf/device: Removing system files as these are now used from nrfx/mdk * nrf: Moving startup files in device one level up as there is no need for deep hierarchy. * nrf: Use NRF52_SERIES defined in nrfx/mdk/nrf.h as define value when testing for both nrf52(832) and nrf52840 variants. * nrf/modules/machine/uart: Enable UART RX by default Enable rx by default after intiialization of the peripheral. Else, the nrfx driver will re-enable rx for each byte read on uart REPL, clearing the EVENT_RXDRDY before second byte, which again will make second byte get lost and read will get stuck. This happens if the bytes are transmitted nrf(51) while still processing the previous byte. Not seen on nrf52, but should also become an issue at higher speeds. This patch sets rx to always be enabled. Hence, not clearing the event between read bytes, and it will be able to detect next byte recieved upon finishing the first. * nrf/modules/machine/timer: Fixing defines excluding Timer1 if ticker/softpwm is used. * nrf: Switching import form mpconfigboard.h to mpconfigport.h in nrfx_config.h as mpconfigboard.h might define default values for defines not set by board specific header. * nrf/modules/machine/i2c: nrfx integration fixes Increasing speed to 400K. Returning Address NACK's as MP error code; MP_ENODEV. Returning MP_ETIMEOUT on all other error codes from TWI nrfx driver except the ANACK. Enabling and disabling the TWI peripheral before and after each transaction. * nrf/examples: Updating ssd1306_mod.py to split framebuffer transfer into multiple chunks * nrf/modules/machine/i2c: Return MP_EIO error if Data NACK occurs. * nrf: Addressing review comments. * nrf: Updating git submodule and users to nrfx v1.0.0. * nrf/modules/machine/adc: Update adc module to follow v1.0.0 nrfx API. * nrf/modules/machine/spi: Implement init and deinit functions Extending SPI objects with a config member such that configuration can be kept between new() and init(). Moving initialization done in new() to common init function shared between the module functions. If SPI is already configured, the SPI peripheral will be uninitialized before initalized again. Adding logic to handle initialization of polarity and phase. As well, updating default speed to 1M from 500K. * nrf/modules/machine: Removing unused nrfx includes in machine module header files |
||
|
Glenn Ruben Bakke
|
b493de75f3 | nrf: Update usage of mp_obj_new_str by removing last parameter. | ||
Daniel Tralamazza
|
e22b943508 |
nrf: Add new port to Nordic nRF5x MCUs.
This commit is a combination of about 802 commits from the initial stages
of development of this port, up to and including the point where the code
was moved to the ports/nrf directory. The following is a digest of the
original commits in their original order (most recent listed first),
grouped where possible by author. The list is here to give credit for the
work and provide some level of traceability and accountability. For the
full history of development please consult the following repository:
https://github.com/tralamazza/micropython
Unless otherwise explicitly state in a sub-directory or file, all code is
MIT licensed and the relevant copyright holders are listed in the
comment-header of each file.
Glenn Ruben Bakke <glennbakke@gmail.com>
ports/nrf: Moving nrf51/52 port to new ports directory
nrf: Aligning with upstream the use of nlr_raise(mp_obj_new_exception_msg(&mp_type_ValueError, ...)
Glenn Ruben Bakke <glennbakke@gmail.com>
nrf/modules/random: Backport of microbit random number generator module
Backport of micro:bit random module.
Plugged into the port as a general random module for all nrf51/nrf52 targets. Works both with and without Bluetooth LE stack enabled.
Behavioral change: seed() method has been removed, as the use of RNG peripheral generates true random sequences and not pseudo-random sequences.
Glenn Ruben Bakke <glennbakke@gmail.com>
nrf/hal/rng: Adding HAL driver for accessing RNG peripheral
The driver also takes care of calling the Bluetooth LE stack for random values if the stack is enabled. The reason for this is that the Bluetooth LE stack take ownership of the NRF_RNG when enabled. Tolerate to enable/disable on the fly, and will choose to use direct access to the peripheral if Bluetooth LE stack is disabled or not compiled in at all.
Driver has been included in the top Makefile, and will not be compiled in unless nrf51_hal_conf.h/nrf52_hal_conf.h defines HAL_RNG_MODULE_ENABLED (1).
Glenn Ruben Bakke <glennbakke@gmail.com>
nrf/boards: Adding Arduino Primo board support (#88)
* nrf: Adding Arduino Primo board support
* nrf: Adding arduino_primo to target boards table in readme.md
* nrf/boards: Activating pyb.LED module for arduino_primo board.
* nrf/boards: Removing define not needed for arduino_primo
Updating arduino_primo board mpconfigboard.h. Removing a define
that was wrongly named. Instead of renaming it, it was removed as
it was never used.
Glenn Ruben Bakke <glennbakke@gmail.com>
nrf: Add support for floating point on nrf52 targets.
Duplicating pattern for detecting location of libm, libc and libgcc
from teensy port. Activating MICROPY_FLOAT_IMPL (FLOAT) for nrf52 targets
and adding libs into the compile. For nrf51 targets it is still set to
NONE as code grows to much (about 30k).
Some numbers on flash use if MICROPY_FLOAT_IMPL is set to
MICROPY_FLOAT_IMPL_FLOAT and math libraries are enabled (lgcc, lc, lm).
nrf51:
======
without float support:
text data bss dec hex filename
144088 260 30020 174368 2a920 build-pca10028/firmware.elf
with float support:
text data bss dec hex filename
176228 1336 30020 207584 32ae0 build-pca10028/firmware.elf
nrf52:
======
without float support:
text data bss dec hex filename
142040 356 36236 178632 2b9c8 build-pca10040/firmware.elf
with float support:
text data bss dec hex filename
165068 1436 36236 202740 317f4 build-pca10040/firmware.elf
Daniel Tralamazza <daniel@tralamazza.com>
nrf: add a note for running the nrfjprog tool on Linux, and touch up the make sd comment
nrf: clean compiler warnings
Glenn Ruben Bakke <glennbakke@gmail.com>
nrf/drivers/bluetooth: Speedup Bluetooth LE REPL.
Updating mp_hal_stdout_tx_strn_cooked to pass on the whole string
to mp_hal_stdout_tx_strn instead of passing byte by byte.
Glenn Ruben Bakke <glennbakke@gmail.com>
nrf: Use the name MicroPython consistently in comments
nrf5: Updating readme with BLE REPL
Ben Whitten <ben.whitten@lairdtech.com>
nrf/boards: Add DVK BL652 from Laird
To build run 'make BOARD=dvk_bl652 SD=s132'
To flash with jlink run 'make sd BOARD=dvk_bl652 SD=s132'
This will remove the existing licences in the bl652
Ben Whitten <ben.whitten@lairdtech.com>
nrf/drivers/bluetooth: Allow s132 to use LFCLK
nrf: Add nordic sd folders to the .gitignore
Glenn Ruben Bakke <glennbakke@gmail.com>
nrf/boards: Updating microbit pin mapping for SPI and I2C.
nrf/boards: Correcting feather52 I2C SDA pin assigned to the board.
nrf/examples: Update ssd1306 modification example to import correct class.
nrf/boards: Activate RTC and Timer module and HAL on pca10056. Also swapping out UART with UART DMA variant on this target board.
nrf/boards: Activate RTC, Timer, I2C, ADC and HW_SPI module and HAL on pca10031.
nrf/boards: Activate RTC, Timer, I2C and ADC module and HAL on pca10001.
nrf/boards: Adding RTC and Timer module and HAL to pca10000.
nrf: Updating README.
nrf: Removing unused font header.
Daniel Tralamazza <daniel@tralamazza.com>
rename temperature example
Glenn Ruben Bakke <glennbakke@gmail.com>
nrf5/examples: Adding ubluepy peripheral example that works across nrf51 and nrf52. The example uses Environmenting Sensing Service to provide the temperature characteristic. The temperature is fetched from the machine.Temp module. One note is that the example uses 1 LED which is not present on all boards.
nrf5/modules/ubluepy: Adding new event constant for gatts write (80) events from bluetooth stacks.
nrf5/hal/timer: Add support for fetching temperature if bluetooth stack is enabled.
nrf5/drivers/bluetooth: Make printf in 'ble_drv_service_add' function part of debug log.
Daniel Tralamazza <daniel@tralamazza.com>
implement #50
Glenn Ruben Bakke <glennbakke@gmail.com>
nrf5/examples: Updating mountsd example with comment from deleted sdcard.py on how to wire SD directly to SPI.
nrf5/examples: Removing copy of sdcard.py also found in drivers/sdcard.
nrf5/examples: Removing copy of ssd1306 driver, creating a new class that overrides the needed function for i2c. Also adding some example usage in the comment in top of the file for both SPI and I2C variant.
nrf5/hal/gpio: Updating toggle inline function to work correctly, currently only used by LED module.
nrf5/examples: Renaming servo.py to nrf52_servo.py as it is only implemented machine.PWM for nrf52.
nrf5/freeze: Adding generic example to freeze. Hello world with board name as parameter.
nrf5/examples: Moving nrf52 specific HW example from freeze to examples to replace test.py with a more generic example.
nrf5: Update pyb module, and led module to only be compiled in if MICROPY_HW_HAS_LED is set to 1.
nrf5/boards: Updating boards with correct LED count. Also adding new flag, MICROPY_HW_HAS_LED, to select whether the board has LED's at all. If not, this will unselect LED module from being compiled in.
nrf5/boards: Updating pca10040 board header to set the LED count.
nrf5: Generalize script setting LED(1) on to be applied only when there are leds present on the board.
nrf5: Updating mpconfigport.h to set default values for MICROPY_HW_LED_COUNT (0) and MICROPY_HW_LED_PULLUP (0).
nrf5/boards/feather52: Update s132 target makefile with dfu-gen and dfu-flash. This enables feather52 with Bluetooth LE. Features to be configured in bluetooth_conf.h.
nrf5/boards/feather52: Add SERIAL makeflag if dfu-flash target is used.
nrf5: Updating readme.md file based on review comments.
nrf5: Update help.c with documentation of CTRL-A and CTRL-B to enter and exit raw REPL mode.
nrf5: Updating main.c to support RAW REPL.
Update README.md
nrf5/modules/music: Updating pitch method to also use configured pin from mpconfigboard.h if set, in the case of lacking kwarg for pin. Also removing some commented out arguments to remove some confusion in the argument list. Done for both play() and pitch().
nrf5/modules/music: Correct parameter checking of pin argument to deside whether to use MUSIC_PIN define or throw an error. If MUSIC_PIN define is configured the pin argument to music module play() can be elided.
nrf5/modules/machine: Update timer init to set default IRQ priority before initializing Timer instance.
nrf5/hal/timer: Update timer hal to use value provided in init to configure the irq_priority.
nrf5/modules/machine: Reserving timer0 instance for bluetooth if compiled in. Leaving timer1 and timer2 for application. Note that music module soft-pwm will also occupy timer1 if enabled.
nrf5/modules/machine: Updating timer module to use new hal. Adding new parameters to the init to set period, mode and callback.
nrf5/hal/timer: Implementing hal_timer to 1us prescaler. Multiplier inside to get to millisecond resolution. Callback must be registered before starting a timer.
nrf5: Makefile cleanup. Removing duplicate include and unused netutils.c used by BLE 6lowpan network which has been removed for now.
nrf5/modules/machine: Indention fix in uart module.
nrf5/modules/machine: Removing unused code from uart module.
nrf5/hal/rtc: Updating hal driver to calculate prescaler a bit more verbose. Using 1 second interval ticks.
nrf5/modules/machine: Fixing type in RTC.
nrf5/modules/machine: Update rtc init to set default IRQ priority before initializing RTC instance.
nrf5/hal/rtc: Aligning RTC (real-time counter) HAL driver with Timer HAL driver. To make api's symetric. Also updating modules/rtc to get aligned with new HAL api.
nrf5/drivers/bluetooth: Moving stop condition initialization before call to bluetooth stack write function is done, to make sure that its not overwritten after reception of the write event in case of with_response writes.
nrf5/drivers/bluetooth: Removing duplicate static variable declaration.
nrf5/modules/ubluepy: Updating characteristic write method to take in an additional keyword, 'with_response'. Default value is False. Only activated in central role.
nrf5/drivers/bluetooth: Updating ble_drv_attr_c_write with possibility to do client write with response. Blocking call.
nrf5/examples: Adding some notes on which pin layout that has been used in the seeed_tft.py ILI9341 driver for driving the display.
nrf5/examples: Shorten name on seeedstudio_tft_shield_v2.py to seeed_tft.py.
nrf5/examples: Updating ili9341 example to use new Frambuffer object instead of legacy Framebuffer1.
nrf5/examples: Removing seeed.py which used a lcd mono framebuffer has been removed.
Matt Trentini <matt.trentini@gmail.com>
Adding a README for the nRF5 port
Glenn Ruben Bakke <glennbakke@gmail.com>
nrf5/examples: Updating documentation in SDCard module example. Correcting typo and adding SD card wireing documentation for direct SPI connection.
nrf5/modules/pin: Adding on() and off() methods to Pin object to be forward compatible with upstream master. Legacy high() and low() methods are kept.
nrf5/modules/spi: Remove pyb abstraction from SPI module, as there was a bug in transfer of bytes due to casting errors. The update removes the pyb_spi_obj_t wrapper going directly on the machine_hard_spi_obj_t as base for machine SPI objects. SDCard mounting is also tested.
nrf5/drivers/bluetooth: Enable ubluepy central by default if running nrf52/s132 bluetooth stack. Maturity of the module is pretty OK now.
nrf5/boards/feather52: Updating pins.csv for the feather52 board.
nrf5/boards/feather52: Updating LED pull to low.
nrf5/boards/feather52: Update SPI pinout.
nrf5/main: Move initializaton of modmusic to the module itself. Upon init of the module, the hardware, pwm and ticker will be started. Could be moved back to main if pwm or ticker should be shared among more modules and have to be initialized more global.
nrf5/modules/machine/timer: If timer is used in combination with SOFT_PWM (implicitly use of ticker.c) guard the Timer1 instance from being instantiated trough python timer module. Also disable implementation of the HAL IRQ handler which is for now explicitly implemented in ticker.c for Timer1.
nrf5/modules/music: Update ticker and modmusic to share global ticks counter as a volatile variable. Use Timer1 hardware peripheral instead of instance 0. Timer0 is not free if used in combination with a bluetooth stack. Update IRQ priority to levels that are compatible in use with a bluetooth stack for both nrf51 and nrf52. Apply nrf51 PAN fixes for Timer1 instead of original Timer0.
nrf5/drivers/bluetooth: Updating bluetooth driver to initialize nrf_nvic_state_t struct during declaration of the global variable instead of explicit memset.
nrf5/hal/irq: Adding wrappers for handling nvic calls when Bluetooth LE stack is enabled.
nrf5/modules/machine: Updating IRQ levels in SPI with IRQ priorities compatible with Bluetooth stacks.
nrf5/device: Remove old startup files in asm, which has now been replaced with c-implementation.
nrf5: Update Makefile to add c-implementation of startup scripts instead of the .s files.
nrf5/device: Adding startup files in .c to replace current asm versions.
nrf5/examples: Tuning Bluetooth LE example controller python script after testing out the example live. Motor speed of 100 was not enought to lift the airplane. Also turning was hard without setting higher angle values. The new values are just guessed values. However, the flying experience was good.
nrf5/hal/irq: Adding include of nrf_nvic.h if s132 bluetooth stack is used to resolve IRQ function wrappers on newer bluetooth stacks.
nrf5/drivers/ticker: Removing unused code.
nrf5/examples: Adding music example. Only working if bluetooth stack is not enabled.
nrf5/boards/microbit: Disable music and softPWM as there are some issues with the ticker.
nrf5: Adding -fstack-usage flag to gcc CFLAGS to be able to trace stack usage on modules.
nrf5/drivers/ticker: Removing LowPriority callback from nrf51 as there is only one SoftwareIRQ free if bluetooth stack is enabled. Also setting new IRQ priority on SlowTicker to 3 instead of 2, to interleave with bluetooth stack if needed. Updating all NVIC calls to use hal_irq.h defined static inlines instead of direct access.
nrf5/hal/irq: Adding IRQ wrappers if Bluetooth Stack is present.
nrf5: Facilitate option to configure away the modble if needed. Enabled if MICROPY_PY_BLE config is enabled in bluetooth_conf.h.
nrf5/boards/microbit: Enable music module by default. However, timer and rtc module has to be disabled. Bluetooth support broken. Optimization needed.
nrf5/modules/machine: Quickfix. Update timer object to not allow instanciation of Timer(0) if SOFT_PWM is enabled by board.
nrf5/hal/timer: Quickfix. Disable IRQ handler if SOFT_PWM is configured to be enabled. Ticker driver has in current driver a seperate IRQ handler for this timer instance.
nrf5/drivers/ticker: Add compile config guard in ticker.c to only include the driver if SOFT_PWM is configured in by board.
nrf5/drivers/softpwm: Renaming pwm_init to softpwm_init to not collide on symbol name with pwm_init in nrf52 machine PWM object.
nrf5: Add modmusic QSTR definition of notes to qstrdefsport.h.
nrf5: Update Makefile to include ticker.c and renamed softpwm. Updating also include paths to include modules/music and drivers/.
nrf5: Adding include of modmusic.h in main.c.
nrf5: Call microbit_music_init0() if enabled in main.c.
nrf5/modules/music: Expose public init function for music module.
nrf5/modules/music: Update modmusic to use updated includes. Add extern ticks. Add function which implements initialization of pwm and ticker, register ticker callback, and start the pwm and ticker. This corresponds to microbit port main.cpp init.
nrf5/drivers/softpwm: Enable use of ticker in softpwm driver.
nrf5/drivers/ticker: Adding ticker.c/.h from microbit port.
nrf5/drivers/pwm: Renaming pwm.c/.h to softpwm.c/.h
nrf5/drivers/pwm: Expose pwm_init() as public function.
nrf5/modules/ubluepy: Making peripheral conn_handle volatile. Upon connection event, the variable is accessed in thread mode. However, the main-loop is blocking on conn_handle != 0xFFFF. If this is not volatile, optimized code will not exit the loop.
nrf5/drivers/bluetooth: As callback functions are in most usecases are set to NULL upon last event to get public API function out of blocking mode, these function pointers has to be set as volatile, as they are updated to NULL in interrupt context, but read in blocking main-thread.
nrf5/examples: Fixing overlapping function names and variable names inside the object. Also removing some print statements. Tuning max angle from -7/7 to -25/25.
Glenn Ruben Bakke <glennbakke@gmail.com>
Powerup (#26)
* nrf5/examples: Adding python example template for PowerUp 3.0 Bluetooth LE controlled Paper Airplane.
* nrf5: Enable bluetooth le central while developing powerup 3.0 example.
* nrf5/examples: Backing up powerup 3.0 progress.
* nrf5/examples: Adding working example on how to control PowerUp 3.0 paper airplane using bluetooth le.
* nrf5/bluetooth: Disable central role.
Glenn Ruben Bakke <glennbakke@gmail.com>
nrf5/modules/ubluepy: Correcting alignment of enum values in modubluepy.h.
nrf5/drivers/bluetooth: Add implementation of client attribute write without response.
nrf5/modules/ubluepy: Pass on buffer to write in characteristic write central mode.
nrf5/modules/ubluepy: Updating characteristic object write function to be role aware. Either peripheral or central (gatts or gattc). Adding dummy call to attr_c_write if central is compiled in. Still in progress to be implemented.
nrf5/drivers/bluetooth: Adding template function for attr_c_write.
nrf5/drivers/bluetooth: Renaming attr_write and attr_notify to attr_s_write and attr_s_notify to prepare for introduction of attribute write for gatt client.
nrf5/modules/ubluepy: Fixing type in ubluepy_peripheral.c.
nrf5/modules/ubluepy: Setting peripheral role upon advertise() or connect().
nrf5/drivers/bluetooth: Adding role member to peripheral object to indicate whether Peripheral object is Peripheral or Central role.
nrf5/modules/ubluepy: Continue characteristic discovery until nothing more is found during connect proceedure.
nrf5/drivers/bluetooth: Refactoring code to group statics for s130 and s132 into the same ifdef. Also adding two empty lines in discovery functions to make it more easy to read.
nrf5/drivers/bluetooth: Updating characteristic discovery to signal whether anything was found or not.
nrf5/modules/ubluepy: Continue primary service discovery until nothing more is found in connect proceedure.
nrf5/drivers/bluetooth: Updating primary service discovery api to take in start handle from where to start the service discovery. Also adjusting return parameter to signal whether anything was found or not.
nrf5/modules/ubluepy: Remove duplication GAP event handler registration in peripheral.connect().
Glenn Ruben Bakke <glennbakke@gmail.com>
Support address types (#18)
* nrf5/modules/ubluepy: Adding new enumeration of address types.
* nrf5/modules/ubluepy: Adding constants that can be used from micropython for public and random static address types.
* nrf5/modules/ubluepy: Adding support for optionally setting address type in Peripheral.connect(). Public address is used as default. Address types can be retrieved from 'constants'. Either constants.ADDR_TYPE_PUBLIC or constants.ADDR_TYPE_RANDOM_STATIC.
* nrf5/modules/ubluepy: Register central GAP event handler before issuing connect to a peripheral. Has to be done before connect() function as a connected event will be propergated upon successfull connection. The handler will set the connection handle which gets connect function out of the busy loop waiting for connection to succeed.
* nrf5/modules/ubluepy: Removing duplicate setting of GAP event handler in connect().
Glenn Ruben Bakke <glennbakke@gmail.com>
nrf5/modules/ubluepy: Register central GAP event handler before issuing connect to a peripheral. Has to be done before connect() function as a connected event will be propergated upon successfull connection. The handler will set the connection handle which gets connect function out of the busy loop waiting for connection to succeed.
nrf5/modules/ubluepy: Fixing compilation bug of wrong variable name when registering gattc event handler in ublupy peripheral connect function (central mode).
nrf5/bluetooth: Updating makefiles with updated paths to bluetooth le components after moving files.
nrf5/bluetooth: Moving stack download script to drivers/bluetooth folder.
nrf5/bluetooth: Move bluetooth driver files to drivers/bluetooth. Move bluetooth stack download script to root folder.
nrf5/bluetooth: Guarding implementation against being linked in by surrounding it with BLUETOOTH_SD flag. Flag is only set if SD=<sdname> parameter is provided during make.
nrf5/bluetooth: Moving makefile include folder and source files of bluetooth driver, ble uart and ble module to main Makefile.
nrf5/bluetooth: Moving help_sd.h and modble.c to modules/ble.
nrf5/modules/machine: bugfix after changing to MP_ROM_PTR in machine module local dict.
nrf5: Syncing code with upstream master and converting all module and method tables to use MP_ROM macros. Also adding explicit casting of local dicts to (mp_obj_dict_t*).
nrf5/modules/timer: Fixing bug in timer_find(). Function allowed to locate index out of range and started to look up in config pointer (index == size of array).
nrf5/modules/timer: Remove test which is covered by timer_find() function in the line below.
nrf5/modules/timer: Adding locals dict table and adding start/stop template functions. Also adding constants for oneshot and periodic to locals dict.
nrf5/modules/timer: Adding timer module to modmachine.
nrf5/boards: Adding micro:bit default music pin definition. Also adding config flag for enabling pwm machine module.
nrf5/hal/timer: Adding start/stop template functions to hal_timer.h/.c
nrf5/Makefile: Adding drivers/pwm.c and modules/music files to the source file list.
nrf5/modules/music: Adding config guard in musictunes.c and adding import of mphal.h.
nrf5/modules/music: Including mphal.h before config guard in modmusic.c. Also changed name on config guard to MICROPY_PY_MUSIC. Missing PWM functions during linkage will show up if PWM module has not not configured.
nrf5/drivers/pwm: Including mphal.h before config guard in pwm.c.
nrf5: Updating mpconfigport.h to include music module as builtin. Adding new configuration for enabling music module. Activating MODULE_BUILTIN_INIT in order to run music module init function on import.
nrf5/modules/music: Backing up progress in music module.
nrf5/drivers/pwm: Updating soft PWM driver to only be included if SOFT_PWM config is set.
nrf5/hal/gpio: Add function to clear output register using a pin mask.
nrf5: Adding new configuration called MICROPY_PY_MACHINE_SOFT_PWM to mpconfigport.h. This config will enable software defined PWM using timer instead of using dedicated PWM hardware. Aimed to be used in nrf51 targets.
nrf5/boards: Removing PWM config set to 0 from pca10001 board. Config will later be re-introduced as SOFT_PWM variant.
nrf5/pwm: Updating config name of PWM to hardware PWM to prepare for introduction of soft variant.
nrf5/modules/music: Backing up progress in modmusic.
nrf5/modules/music: backing up porting progress in modmusic.c.
nrf5/modules/music: Commenting out backend function calls in modmusic.c to make module compile for now.
nrf5/modules/music: Updating music module to use pin_obj_t instad of microbit_pin_obj_t. Update include to drivers/pwm.h to resolve some undefined functions.
nrf5/modules/music: Removing c++ extern definition. Updating include list in modmusic.c. Removing module name from module struct.
nrf5/modules/music: Removing include of modmicrobit.h in musictunes.c.
nrf5/modules/music: Adding header to expose extern structs defined in musictunes.c
nrf5/drivers: Adding copy of microbit soft pwm.
nrf5/modules/music: Renaming microbitmusic files to modmusic/music.
nrf5/modules/music: Renaming microbit module to music.
nrf5/modules/microbit: Copying microbit music module to the port.
nrf5/modules/timer: Adding timer3 and timer4 to timer object in case of nrf52 target.
nrf5/modules/timer: Optimizing timer object structure and updating the module to use new hal_timer_init structures and parameters.
nrf5/hal/timer: Adding empty IRQ handlers for all timers.
nrf5/hal/timer: Changing hardcoded hal timer instance base to a lookup, so that IRQ num can be detected automatically without the need of using struct param on it. Size of binary does not increase when using Os.
nrf5: Updating example in main.c on how to execute string before REPL is set up, to allow for boards with two leds. Todo for later is to update this code such that it will skip this LED toggle when there are no leds defined. Or use an example not depending on LEDs.
nrf5/bluetooth: Updating Bluetooth LE stack download script to allow to be invoked from any parent folder. No need to change directory to bluetooth/ in order to get the correct download target folder position. Using the script location to determine the target folder.
nrf5/boards: Adding board target for feather52 using s132 v.2.0.1 application offset even if the device is not using softdevice. To be worked on later.
nrf5/boards: decrease size of ISR region from 4k to 1k in custom feather52 linker script to get some more flash space.
nrf5/boards: Updating feather52 mpconfigboard.h to use correct uart pins, flow control disabled. Also adjusting leds down to two leds.
nrf5/boards: Updating path to custom linker script for feather52 board.
nrf5/boards: Renaming bluefruit_nrf52_feather to feather52 to shorten down the name quite drastically.
nrf5/boards: Updating path to custom bluefruit feather linker script after renaming board folder.
nrf5/boards: Renaming bluefruit_feather to bluefruit_nrf52_feather as it also exist a m0 variant of the board name.
nrf5/boards: Updating mpconfigboard.h for bluefruit nrf52 feather with correct board, mcu and platform name.
nrf5/boards: Updating adafruit bluefruit nrf52 feather linker script to use 0x1c000 application offset.
nrf5/boards: Renaming custom linker script for bluefruit feather to reflect that the purpose of the custom linker script is DFU. The script is diverging from the generic s132 v2 linker script in the offset of the application.
nrf5/boards: Adding custom linker script for adafruit nrf52 bluefruit feather to be able to detect application upper boundry in flash. Pointing s132 mk file to use this new custom linker script instead of the generic s132 v2 linker script.
nrf5/boards: Adding linker script for nrf52832 s132 v.2.0.1.
nrf5/boards: Adding template board makefiles and configs for bluefruit nrf52 feather. Copied from pca10040 target board. Linker script reference updated to use s132 v2.0.1. Non-BLE enable build disabled for now. Board configuration for leds, uart etc has not been updated yet from pca10040 layout.
nrf5/bluetooth: Correcting typo in test where s132 API version is settled.
nrf5/bluetooth: Updating bluetooth le driver to compile with s132 v.2.0.1 stack.
nrf5/bluetooth: Add new compiler flag to signal API variants of the s132 bluetooth le stack. The version is derived from the major number of the stack name.
nrf5/bluetooth: Remove hardcoded softdevice version as this now comes as parameter from board makefile.
nrf5/boards: Updating makefiles using bluetooth stack to use updated linker script file names.
nrf5/boards: Renaming bluetooth stack linker scripts to reflect version of the stack.
nrf5/boards: adding some spaces in s132 makefile for pca10040.
nrf5/boards: Renaming linker script for nrf52832 using bluetooth stack such that it also holds the version number of the stack. Updating linkerscript using the target linker script.
nrf5/bluetooth: Add support for downloading s132_2.0.1 bluetooth stack.
nrf5/bluetooth: Switch over to downloaded bluetooth stacks from nordicsemi.com instead of getting them through the SDK's. This will facilitate download of s132 v2.0.0 later.
nrf5/bluetooth: Fixing bug found when testing microbit. Newly introduced advertisment data pointer was not cleared on nrf51 targets. Explicit set to NULL as no additional advertisment data is set. Raises a question on why the nrf51 static variable was not zero initialized. To be checked up.
nrf5: Removing SDK_ROOT parameter to Makefile. Bluetooth stacks should be downloaded using the download_ble_stack.sh. The script should be run inside the bluetooth folder to work properly.
nrf5/bluetooth: Adding back SOFTDEV_HEX as flash tools in main Makefile uses this to locate hex file.
nrf5/bluetooth: Including bluetooth stack version in folder name after download to be able to detect if stack has been updated.
nrf5/bluetooth: Updating Bluetooth LE stack download script.
nrf5/bluetooth: Adding bash script to automate download of bluetooth le stacks
nrf5/examples: Adding example to show how to use current PWM module to control servo motors.
nrf5/modules/machine: Updating PWM module with two new kwargs parameters. One for setting pulse with more fine grained. This value should not exceed the period value. Also, adding support for setting PWM mode, whether it is LOW duty cycle or HIGH duty cycle. By default, high to low is set (this could be changed).
nrf5/hal/pwm: Updating PWM implementation to support manually set duty cycle period. Pulse width has precidence over duty cycle percentage. Also adding support for the two configurable modes, high to low, and low to high, duty cycles.
nrf5/hal/pwm: Adding more configuration options to the PWM peripheral wrapper. Possibility to set pulse with manually, and also mode. The mode indicates whether duty cycle is low and then goes high, or if it is high and then go low. Added new type to describe the two modes.
nrf5: Adding hal_gpio.c to Makefile's source list.
nrf5/modules/machine: Updating Pin module to register a IRQ callback upon GPIO polarity change events.
nrf5/hal/gpio: Adding initial gpiote implementation to handle IRQ on polarity change on a gpio.
nrf5: Moving initialization of pin til after uart has been initialized for debugging purposes. This will make it possible to use uart to print out debug data when adding gpio irq handlers.
nrf5/hal/gpio: Adding some new structures and functions to register irq channels to gpio's using GPIOTE peripheral
nrf5/hal/gpio: Adding missing include.
nrf5/modules/machine: Style fix in pin object, indention.
nrf5/modules/machine: Adding placeholder for irq method to pin object class.
nrf5/modules/machine: Adding pin irq type and basic functions and structures.
nrf5/hal/gpio: Reintroducing gpio polarity toggle event to be able to reference the short form of adding high_to_low and low_to_high together.
nrf5/hal/gpio: Updating hal_gpio.h with some tab-fixes in order to make the file a bit consistent in style.
nrf5/hal/gpio: Removing toggle event from the enumeration as that will be a combination of the rising and falling together.
nrf5/modules/machine: Removing toggle event trigger as that will be a combination of the rising and falling together.
nrf5/modules/machine: Adding new constants to pin object for polarity change triggers using the enumerated values in hal_gpio.h.
nrf5/hal/gpio: Adding new enumeration for input polarity change events.
nrf5/hal: Moving hal_gpio functions, types and defines from mphalport.h to a new hal_gpio.h.
Revert "lib/netutils: Adding some basic parsing and formating of ipv6 address strings. Only working with full length ipv6 strings. Short forms not supported at the moment (for example FE80::1, needs to be expressed as FE80:0000:0000:0000:0000:0000:0000:0001)."
nrf5: Removing leftover reference to deleted display module.
nrf5/usocket: Removing network modules related to Bluetooth 6lowpan implementation as it depends on SDK libraries for now. Will be moved to seperate working branch.
nrf5: Removing custom display, framebuffer and graphics module to make branch contain core components instead of playground modules.
nrf5/modules/usocket: Updating import of netutils.h after upmerge with upstream master.
nrf5/bluetooth: Add some comment on the destination of the eddystone short-url.
nrf5/bluetooth: Updating Eddystone URL to point to https://goo.gl/x46FES which hosts the MicroPython WebBluetooth application which will be able to connect to the Bluetooth LE UART service of the device and create the REPL.
nrf5/bluetooth: Adding webbluetooth REPL template. Alternating advertisment of eddystone URL and UART BLE service every 500 ms. Adding new config parameter to bluetooth_conf.h to enable webbluetooth repl. Has to be configured in combination with BLE_NUS. Eddystone URL not pointing to a valid WebBluetooth application at the moment, but rather to micropython.org as a placeholder for now.
nrf5/modules/ubluepy: Adding method Peripheral object to stop any ongoing advertisment. Adding compile guard to only include advertise and advertise_stop if peripheral role is compiled in.
nrf5/bluetooth: Adding function to stop advertisment if onging
nrf5/modules/ubluepy: Adding support for starting advertisment from BLE UART REPL, by delaying registration of gatt/gatts and gattc handlers until needed in advertise or connect. If non connectable advertisment is selected, handlers in peripheral new is not anymore overriding the other peripheral instances which has set the callbacks.
nrf5/bluetooth: Adding possibility to configure whether advertisment should be connectable or not.
nrf5/bluetooth: Removing legacy advertise function in the bluetooth driver, which only did a hardcoded eddystone beacone advertisment.
nrf5/help: Updating ble module help description to also include the address method.
nrf5/bluetooth: Renaming the ble module method address_print() to address(), as it will now return a string of the resolved local address. Updating the function to create a string out the local address and return this.
nrf5/bluetooth: Update ble_drv_address_get to new api which pass in a address struct to fill by reference. Updating implementation to copy the address data. Also ensuring that the bluetooth stack has been enabled before fetching the address from the bluetooth stack.
nrf5/bluetooth: Adding new structure which can hold local address. Updating api prototype for ble_drv_address_get with a address structure by reference.
nrf5/bluetooth: Updating help text for ble module to also list up enabled() function which queries the bluetooth stack on whether it is enabled or not.
nrf5/bluetooth: Removing advertise from ble module. Removing help text as well.
nrf5/examples: Adding python eddystone example using ubluepy api.
nrf5/modules/ubluepy: Open up Peripheral advertise method to pass custom data to the bluetooth driver. Allowing method to allow kwargs only if no args is set. To support setting data kwarg only.
nrf5/modules/ubluepy: Adding new members to the ublupy advertisment parameters, to hold custom data payload if set.
nrf5/bluetooth: Cleaning up stack enable function, to not set device name twice. Also, adding support for setting custom advertisment data.
nrf5/modules/ubluepy: Adding compile guard for UBLUEPY_CENTRAL around the char_read() call to ble_drv_attr_c_read().
nrf5/bluetooth: Moving central code inside central bluetooth stack defines to make peripheral only code compile again.
nrf5/examples: Updating ubluepy scan example to use constant value from ubluepy instead of hardcoded value.
nrf5/examples: Adding example on how to use the ubluepy Scanner object in order to scan for a device name and find the address of the device. This can subsequently be used to perform a Central role connect() using the Peripheral object.
nrf5/modules/ubluepy: Turn all attributes (addr, addr_type and rssi) to method calls instead of using common .attr callback. Adding getScanData implementation, which parses the advertisment data and returns a list of tuples containing (ad_type, desc, value). Description is generated by peeking into the ad_types local dicts map table, and do a reverse lookup on the value to find the QSTR.
nrf5/modules/ubluepy: Adding ad_types constants in new object. Linking in ad_types object into the ubluepy.constants local dict.
nrf5/modules/ubluepy: Expose ubluepy constant objects as externs in modubluepy.h to be able to get access to the local dict tables in order to do a reverse lookup on value to resolve QSTR from external modules in c.
nrf5/modules/ubluepy: Upon advertisment event, also store the advertisment data.
nrf5/modules/ubluepy: Adding callback function to handle read response if gatt client has issued a read request. Also adding method for returning the uuid instance from the object.
nrf5/modules/ubluepy: Adding value data member to the characteristic object. This can hold the value data when gatt client perform a read and value has to be transferred between interrupt and main thread.
nrf5/bluetooth: Updating bluetooth driver to support GATT client read of a characteristic value. Data passed to caller in interrupt context, and copy has to be performed. The function call is itself blocking.
nrf5/modules/ubluepy: Adding uuid() function to service object to return UUID instance of the service.
nrf5/modules/ubluepy: Adding binVal() function to the ubluepy UUID object. For now returning the uint16_t value of the UUID as a small integer.
nrf5/modules/ubluepy: Adding dummy function call to ble_drv_attr_c_read.
nrf5/bluetooth: Adding new api for reading attribute as gatt client. Renaming old ble_drv_attr_read function to ble_drv_attr_s_read to indicate the server role.
nrf5/bluetooth: Adding event handling cases for gatt client read, write and hvx events.
nrf5/modules/ubluepy: Tab-fix
nrf5/modules/ubluepy: Updating peripheral object to handle characteristic discovery (central mode).
nrf5/modules/ubluepy: Adding start and end handle to service object.
nrf5/bluetooth: Adding support for central characteristic service discovery. Updating primary service discovery to block until all services has been created in the peripheral object before returning from the bluetooth driver. This pattern is also applied to the characteristic discovery.
nrf5/modules/ubluepy: Updating ubluepy peripheral object to new bluetooth driver API. Starting to populate service objects and uuid objects. Also adding the service to the peripheral object throught the regular static function for adding services. Handle value for the primary service is assuming that it is the first element in the handle range; start_handle reported by the service discovery.
nrf5/bluetooth: Updating bluetooth driver to do service discovery, doing callbacks to ubluepy upon each individual primary service discovered. Using intermediate structure defined by the driver, to abstract bluetooth stack specific data in ubluepy.
nrf5/modules/ubluepy: Adding some work in progress on service discovery.
nrf5/bluetooth: Adding implementation to the discover service function. Adding handler for gatt client primary service discovery response events, and passing this to the ubluepy upon reception.
nrf5/bluetooth: Adding function parameters and return type to service and characteristic discovery template functions.
nrf5/bluetooth: Adding template functions for service discovery in bluetooth driver.
nrf5/bluetooth: Adding function to register gattc event handler (central).
nrf5/bluetooth: Adding intermediate gattc callback function type in bluetooth driver.
nrf5/bluetooth: Turning off debug logging in bluetooth driver, which does not work well with bluetooth REPL mode.
nrf5/bluetooth: Fixing some smaller tab errors in the bluetooth driver.
nrf5/bluetooth: Updating bluetooth le driver to handle GAP conn param update request. Also updating minor syntax in previous switch case.
nrf5/boards: Inrease heap size in the nrf52832 w/s132 bluetooth stack linker script.
nrf5/modules/ubluepy: Update connect method to parse dev_addr parameter and pass it to the bluetooth driver, going through a allocated heap buffer. Adding call to the bluetooth driver to issue a connect. Hardcoding address type for now.
nrf5/bluetooth: Updating connect function in the bluetooth driver to do a successful connect to a peripheral device.
nrf5/modules/ubluepy: Adding template function for central connect() in peripheral object.
nrf5/modules/ubluepy: Adding locals dict to Scan Entry introducing function to retreive Scan Data. Not working as expected together with .attr. It looks like locals dict functions are treated to be attributes and cannot be resolved.
nrf5/bluetooth: Adding function for connecting to a device (in central role). Not yet tested.
nrf5/modules/ubluepy: Return BLE peer address as string instead of bytearray. Updated struct in modubluepy.h to use a mp_obj_t to hold a string instead of a fixed 6-byte array. Stripped down ScanEntry print out to only contain class name, peer address available through addr attribute.
nrf5/bluetooth: capture address type in addition to advertisment type in bluetooth advertisment reports.
nrf5/modules/ubluepy: Correcting rssi member in scan_entry object to be int instead of uint.
nrf5/modules/ubluepy: Adding attribute to ScanEntry object for getting address (returning bytearray), type (returning int) and rssi (returning int).
nrf5/modules/ubluepy: Copy address type and rssi to the ScanEntry object upon reception of an advertisment report callback.
nrf5/bluetooth: Adding address type to bluetooth stack driver advertisment structure, and fill the member when advertisment report is received.
nrf5/modules/ubluepy: Swapping address bytes when copying bluetooth address over to ScanEntry object during advertisment scan report event.
nrf5/modules/ubluepy: Extending print of ScanEntry object to also include the bluetooth le address.
nrf5/modules/ubluepy: Create new adv report list for each individual scan. Create a new ScanEntry object instance on each advertisment event recieved and append this to the current adv_report list.
nrf5/modules/ubluepy: Adding print function to scan_entry object.
nrf5/modules/ubluepy: Populating ubluepy_scan_entry_obj_t with members that are interesting to keep for the ScanEntry object.
nrf5/bluetooth: Moving callback definitions to bluetooth driver header. Refactoring bluetooth driver, setting new names on callback functions and updating api to use new callback function name prefix.
nrf5/modules/ubluepy: Extracting advertisment reports and adding some data to list before returning it in scan() method.
nrf5/bluetooth: Adding handling of advertisment reports in bluetooth driver and issue callback to ubluepy. A bit ugly implmentation and has to be re-worked.
nrf5/bluetooth: adding adv report data structure to pass to ubluepy upon adv report event. Adding new api for setting callack where to handle advertisment events in ubluepy.
nrf5/modules/ubluepy: Adding adv_reports member to scanner object, to hold the result of scan.
nrf5/modules/machine: Cleaning up uart a bit more. Removing unused any() method, and aligning print and local dict names to use machine_uart prefix.
nrf5/bluetooth: Turn off bluetooth printf logging.
nrf5: Add back ublupy scanner and scan entry source files in Makefile.
nrf5/bluetooth: Enable implementation in scan start function in the bluetooth stack driver.
nrf5/boards: Adjust heap end after increased .data usage in nrf52832 s132 linker script.
nrf5/bluetooth: Adding more implementation in scan start function. However, commented out for time beeing, as there is some memory issues when activating central.
nrf5: Removing ubluepy scanner and scan entry from Makefile source list until nrf52 central issues has been resolved.
nrf5/bluetooth: Correcting indention.
nrf5/bluetooth: Adding some implementation to scan_start function.
nrf5/modules/ubluepy: Adding scan method to the Scanner object. Adding locals dict table.
nrf5/bluetooth: Adding empty scan_start and scan_stop function to the bluetooth driver.
nrf5/modules/ubluepy: Adding constructor function to scanner object.
nrf5/modules/ubluepy: Adding print function to Scanner object.
nrf5/modules/ubluepy: Disable all functions central related functions in the Peripheral object for now, even if MICROPY_PY_UBLUEPY_CENTRAL is enabled.
nrf5/modules/ubluepy: Activate Scanner and ScanEntry objects if MICROPY_PY_UBLUPY_CENTRAL is set.
nrf5/bluetooth: Adding new configuration flag for s132 bluetooth stack, to enable/disable ubluepy central. Disabled by default.
nrf5: Adding ubluepy_scanner.c and ubluepy_scan_entry.c to Makefile source list.
nrf5/modules/ubluepy: Adding template object typedefs for scanner and scan entry, and extern definition for scanner and scan_entry object type in modubluepy.h
nrf5/modules/ubluepy: Adding templates for central role Scanner and ScanEntry objects.
nrf5/uart: Moving UART from pyb to machine module.
Glenn Ruben Bakke <glennbakke@gmail.com>
nrf5/uart: Refactoring UART module and HAL driver
Facilitating for adding second HW uart. Moving pyb_uart into
machine_uart. Adding return error codes from hal_uart functions,
if the hardware detects an error.
Glenn Ruben Bakke <glennbakke@gmail.com>
nrf5/modules: Updating uart object to allow baudrate configuration.
nrf5/bluetooth: Moving bluetooth_conf.h to port root folder to make it more exposed.
nrf5/boards: Remove define of machine PWM module configuration in nrf51 targets, as the device does not have a HW PWM peripheral.
nrf5: Disable machine PWM module by default if board does not define it.
nrf5/boards: Disable all display modules in pca10028 board config.
nrf5: Updated after merge with master. Updating nlr_jump_fail to call __fatal_error in order to provide a non-returning function call.
nrf5/boards: Adding more heap memory to the nrf51 256k/32k s110 linker script. Leaving 2k for stack.
nrf5/modules/machine: Adding __WFI() on machine.deepsleep()
nrf5/modules/machine: Adding __WFE() on machine.sleep()
nrf5/modules/machine: Adding enable_irq() and disable_irq() method to the machine module. No implementation yet for the case where bluetooth stack is used.
nrf5/modules/rtc: Adding support for stopping and restarting rtc (if periodic) for all the instances of RTC.
nrf5/modules: Updating RTC kwarg from type to mode to set ONESHOT or PERIODIC mode.
nrf5/modules: Adding support for periodic RTC callback.
nrf5/hal: hal_rtc update. Adding current counter value to period value before setting it in the compare register.
nrf5/modules: Updating rtc module with non-const machine object list in order to allow setting callback function in constructor.
nrf5/hal: Adding initialization of LFCLK if not already enabled in hal_rtc.
nrf5/modules: Moving irq priority settings in RTC object to rtc_init0 when initializing the hardware instances. Also modifying comments a bit. Adding simple example in comment above make_new function on how the object is intended to work.
nrf5: Updating main.c to initialize the rtc module if enabled.
nrf5/modules: Added RTC into the machine module globals dict.
nrf5/modules: Updating rtc module. Not working yet. Updated to align with new hal_rtc interface. Added start and stop methods. Allowing callback function set from init. This should be moved to start function, not set in main.
nrf5/hal: Updating hal RTC implementation.
nrf5/hal: Adding hal_irq.h which defines a set of static inline functions to do nvic irq operations.
nrf5/modules: Updating machine uart module to use new hal uart interface name.
nrf5/hal: Renaming uart hal function to use hal_uart prefix.
nrf5/modules: Updating readfrom function in machine i2c module to use the new hal function which has been implemented.
nrf5/hal: Adding untested implementation of twi read. Lacking sensors to test with :)
nrf5/boards: Renaming linker script for all nrf51 and nrf52 into more logical names. Updating all boards with new names.
nrf5/bluetooth: Updating header guard in bluetooth_conf.h to reflect new filename.
nrf5/bluetooth: Updating old references to 'sdk' to use the new folder name 'bluetooth' in makefiles.
nrf5: Renaming sdk folder to bluetooth.
nrf5: Merging sdk makefiles into bluetooth_common.mk. s1xx_iot is still left out of this refactoring.
nrf5: Renaming nrf5_sdk_conf.h to bluetooth_conf.h
nrf5: Starting process of renaming files in sdk folder to facilitate renaming of the folder and make it more logical. Transition will be from sdk to bluetooth.
nrf5/boards: Adding support for SPI, I2C, ADC, and Temp in machine modules in micro:bit target. Also activating hal drivers for the peripherals.
nrf5/sdk: Updating low frequency clock calibration from 4 seconds to 250 ms for stack enable when BLUETOOTH_LFCLK_RC is enabled.
nrf5/boards: Updating nrf51822_aa_s110.ld to be more generic, leaving all RAM not used for stack, .bss and .data to the heap.
nrf51: Removing stack section from startup file as it got added to the final hex file. Thanks dhylands for helping out.
nrf5/boards: Adding BLUETOOTH_LFCLK_RC to CFLAGS in microbit s110 makefile.
nrf5/sdk: Adding support for initializing the bluetooth stack using RC oscillator instead of crystal. If BLUETOOTH_LFCLK_RC is set in CFLAGS, this variant of softdevice enable will be activated.
nrf5: Initialize repl_display_debugging_info in pyexec.c for cortex-m0 targets.
Glenn Ruben Bakke <glennbakke@gmail.com>
nrf5/sdk: Updating ringbuffer.h to use volatile variables for start and end.
nrf5/sdk: Rename cccd_enable variable to m_cccd_enable in bluetooth le UART driver. Also made the variable volatile.
nrf5/modules: Updating example in ubluepy header to use handle instead of data length upon reception of an event.
nrf5/modules: Updating ubluepy peripheral to pass handle value to python event handler instead of data length. Data length can be derived from the bytearray structure.
nrf5/sdk: Updating bluetooth le driver to handle SEC PARAM REQUEST by replying that pairing is not supported. Moving initialization of adv and tx in progress state variables to stack enable function.
nrf5/modules: Enable ubluepy constants for CONNECT and DISCONNECT for other bluetooth stacks than s132.
nrf5/sdk: Fixing unaligned access issues for nrf51 (cortex-m0) in bluetooth le driver
Glenn Ruben Bakke <glennbakke@gmail.com>
nrf5/sdk: Removing SDK dependant BLE UART Service implementation
The sdk_12.1.0 nrf52_ble.c implementation was dependent on SDK components.
This has been replaced with the ble_uart.c implementation using a standalone
bluetooth driver implementation without need of SDK components.
Also, sdk.mk has been updated to not use a special linker script.
Glenn Ruben Bakke <glennbakke@gmail.com>
nrf52: Removing folder to not confuse which folder is in development
Glenn Ruben Bakke <glennbakke@gmail.com>
nrf5/sdk: Removing ble_repl_linux.py
Script does not really work very well with blocking char read and
async ble notifications printing data when terminal stdout is blocked
by readchar. Bluetooth UART profile implemented in ble_uart.c is
now working with tralamazza's nus_console nodejs script.
Ref: https://github.com/tralamazza/nus_console
Glenn Ruben Bakke <glennbakke@gmail.com>
nrf5: Add default config for MICROPY_PY_BLE_NUS (0)
Disable Bluetooth UART to be used for REPL by default. Can be overridden
in nrf5_sdk_conf.h. It is defined in mpconfigport.h as it is connected to
mphalport.c, where the config is used to determine whether default print
functions should be using HW UART or Bluetooth UART.
Glenn Ruben Bakke <glennbakke@gmail.com>
nrf5/sdk: Add ble_uart.c to source list
ble_uart.c implements UART Bluetooth service on top of the
bluetooth stack driver api calls. Can be enabled to be compiled
in by defining MICROPY_PY_BLE_NUS = 1 in nrf5_sdk_conf.h.
Glenn Ruben Bakke <glennbakke@gmail.com>
nrf5/sdk: Removing include of sdk_12.1.0's build.mk
As no sources are needed from the SDK this build makefile
can be deleted.
Glenn Ruben Bakke <glennbakke@gmail.com>
nrf5: Force implementation of tx_str_cooked function if BLE NUS enabled.
If BLE UART service has been enabled, the mp_hal_stdout_tx_strn_cooked
is not defined by default anymore, and has to be implemented by the
UART driver (in this case BLE).
Glenn Ruben Bakke <glennbakke@gmail.com>
nrf5/sdk: Adding compiler guard around exchange MTU request event.
As s110 is not having this event or function call to answer on a MTU
exchange request, this is excluded for all other version than s132
for now.
Bander Ajba <banderajba@macwan.local>
minor documentation and extra tabs removal fixes
Glenn Ruben Bakke <glennbakke@gmail.com>
nrf5/sdk: Updating BLE UART implementation by swapping TX and RX uuid and characterisitic handling. Removed dummy write delay of 10 ms.
nrf5/sdk: Backing up progress in bluetooth le driver. Adding new gap and gatts handlers. Added handling of tx complete events when using notification, responding to MTU request, and setting of default connection parameters.
Bander Ajba <banderajba@macwan.local>
fixed temp module to allow for instance support
did required modification to merge the temperature sensore module
Dave Hylands <dhylands@gmail.com>
Fix up Makefile dependencies
I also didn't see any real reason for mkrules.mk to exist,
so I merged the contents into Makefile.
Now you can do:
```
make BOARD=pca10028 clean
make BOARD=pca10028 flash
```
and it will work properly.
Glenn Ruben Bakke <glennbakke@gmail.com>
nrf5: Updating Makefile to use correct variable for setting directory of file to freeze as mpy.
nrf5: Setting stack top in main.c. Thanks dhylands for pointing this out.
nrf5/sdk: Backing up progress in BLE UART driver. Adding ringbuffer in order to poll bytes from recieved data in REPL main loop.
nrf5/modules: Updating ubluepy example to print out gatts write events with data.
nrf5/boards: Updating pca10028 bluetooth stack targets to have a MCU_SUB_VARIANT.
Bander Ajba <banderajba@macwan.local>
added support for hardware temperature sensor
Glenn Ruben Bakke <glennbakke@gmail.com>
nrf5/sdk: Adding macro based ringbuffer written by Philip Thrasher. source: https://github.com/pthrasher/c-generic-ring-buffer/blob/master/ringbuffer.h. Copyright noticed copied into the file, and file reviewed by Philip.
nrf5/sdk: Updating bluetooth le driver to extract data length and pointer from the event structure upon gatts write operation.
nrf5/modules: Expose ubluepy characteristic and peripheral types as external declaration in ublupy header.
nrf5: Updating main to initialize bluetooth le uart module right before bluetooth REPL is started.
nrf5/sdk: Updating bluetooth le uart implemenatation to block until cccd is written.
nrf5/sdk: Backing up ubluepy version of ble uart service for Bluetooth LE REPL.
nrf5/modules: Updating ubluepy example in header to align with bluetooth uart service characteristic's.
nrf5/modules: Implementing characteristic write method. Possible to use write for both write and notifications.
nrf5/sdk: Remaning bluetooth driver function ble_drv_attr_notif to *_notify.
nrf5/modules: Adding props and attrs parameter to ubluepy characteristic constructor to override default values. Adding method for reading characteristic properties. Adding values to the local dict table that gives possibility to OR together a configuration of properties and attributes in the keyword argument during construction.
nrf5/sdk: Adding parsing of characteristic properties and attributes (extra descriptions for the characteristic, for now cccd).
nrf5/modules: Adding new members to ubluepy characteristic object, props and attrs. Adding enum typedefs for various properties and attributes.
nrf5/modules: Syncing uart module code after upmerge with upstream master.
nrf5/boards: Releasing more RAM for heap use in the nrf51 s110 linker script.
nrf5/modules: Adding new gatts handler and registration of it during creation of a peripheral object. Also, added forwarding to python callback function (for now the same as for GAP).
nrf5/modules: Adding new callback type in modubluepy for gatts events.
nrf5/sdk: Adding support for setting gatts handler in the bluetooth le driver.
nrf5/modules: Adding constant for CCCD uuid in ubluepy constants dict.
nrf5: Adding ubluepy_descriptor.c into source list to compile.
nrf5/modules: Adding template for ubluepy descriptor class implementation.
nrf5/modules: Adding object structure for ubluepy descriptor.
nrf5/sdk: Adding template functions for attribute read/write/notify in bluetooth le driver.
nrf5/modules: Adding getCharacteristic method in ublupy service class. This function returns the characteristic with the given UUID if found, else None. The UUID parameter has to be of UUID class type, any other value, like strings will throw an exception.
nrf5/modules: Updating method documentation in ubluepy peripheral and service.
nrf5/modules: Adding new method, getCharacteristics(), in the ubluepy service class. The method returns the list of characteristics which has been added to the service instance.
nrf5/modules: Updating method documentation in ubluepy peripheral class.
nrf5/modules: Updating ubluepy service. Creating empty characteristic list in constructor. Appending characteristic to the list when added.
nrf5/modules: Changed return in ubluepy addService() function to return mp_const_none instead of boolean.
nrf5/modules: Correcting tabbing in ubluepy periheral impl.
nrf5/modules: Updating ubluepy peripheral. Creating empty service list in constructor. Appending services to the list when added. Added new function for retreiving the service list; getServices().
nrf5/modules: Adding new members in ubluepy peripheral and service object to keep track of child elements. Peripheral will have a list of services, and service will have a list of charactaristics.
nrf5/modules: Removing connection handle from python gap event handler callback function.
nrf5/modules: Updating ubluepy example in the header file with new function call to add service to a peripheral instance.
nrf5/modules: Updating peripheral class to assign periopheral parent pointer to service's thats added. Also added a hook in the bluetooth le event handler to store the connection handle value, to prevent any services or characteristics to handle this value themselves.
nrf5/modules: Updating service object to clear pointer to parent peripheral instance. Also assinging pointer to the service when adding a new characteristic.
nrf5/modules: Updating print to also include peripheral's connection handle. Setting pointer to service parent instance to NULL.
nrf5/modules: Correcting event id numbers for connect and disconnect event in ubluepy_constants.py
nrf5/modules: Shuffle order of typedef in ubluepy header. Adding service pointer in characteristic object. Adding peripheral pointer to the service structure. When populated, the characteristic would get access to conn_handle and service handle through pointers. Also service would get access to peripheral instance.
nrf5/modules: adding template functions for characteristic read and write.
nrf5/modules: Adding constants class to ubluepy which will contain easy access to common bluetooth le numbers and definitions for the bluetooth stack.
nrf5/modules: Updating example in ubluepy header with 16-bit uuid's commented out, to show usage.
nrf5/sdk: Adding support for adding 16-bit uuid's in advertisment packet. The services in paramter list can mix 16-bit and 128-bit.
nrf5/sdk: Updating sdk_common.mk with new filename of bluetooth le driver.
nrf5: Updating all includes of softdevice.h to ble_drv.h
nrf5/sdk: renaming softdevice.* to ble_drv.*
nrf5/sdk: Renaming bluetooth driver functions to have ble_drv* prefix. Updating modules using it.
nrf5/sdk: Enable ubluepy module if s110 bluetooth stack is enabled.
nrf5/sdk: Updating bluetooth driver to only set periph and central count if s132 bluetooth stack. These parameters does not exist in older stacks.
nrf5/modules: Updating bluetooth driver and ubluepy to use explicit gap event handler. Adding connection handle parameter to the gap handler from ubluepy. Resetting advertisment flag if connection event is recieved, in order to allow for subsequent advertisment if disconnected again. Example in ublupy header updated.
nrf5: Adding target to flash bluetooth stack when using pyocd-flashtool.
nrf5/modules: Guarding callback to python event handler before issue the call in case it is not set.
nrf5/modules: Updating ubluepy example to turn led2 on and off when receiving connected and disconnect bluetooth event.
nrf5/sdk: Updating bluetooth driver to have configurable logs.
nrf5/modules: updating ubluepy and bluetooth driver to support python created event handler. Added registration of callback from ubluepy against the bluetooth driver and dispatching of events to the user supplied python function.
nrf5/modules: Splitting includes to be inside or outside of the compile guard in ubluepy. This way, all micropython specific includes will be outside, and internal will be inside. This way, there will not be any dependency towards ubluepy headers if not compiled in.
nrf5/modules: Adding two new functions to ubluepy peripheral class to set specific handlers for notificaitons and connection related events.
nrf5: Set ubluepy to disabled by default in mpconfigport.h if not configured.
nrf5/modules: Moving includes inside config defines to make non-ubluepy targets compile again.
nrf5/modules: Adding 'withDelegate' function to peripheral class.
nrf5/modules: Adding ubluepy delegate type to modubluepy globals table.
nrf5: Adding ubluepy_delegate.c to list of source files to compile.
nrf5/modules: Adding new object struct for delegate class and adding a delegate struct member to Peripheral class to bookeep callback object when event occurs.
nrf5/modules: Adding template for ubluepy delegate class.
nrf5/sdk: Fixing debug print in bluetooth driver to not use >>> prefix. Adding one more print for connection parameter update.
nrf5/sdk: Correcting advertisment packet in bluetooth driver in order to make the device connectable.
nrf5/sdk: Implementing simple event handler for bluetooth stack driver.
nrf5/sdk: Disable all sdk components from being included in the build while implementing ubluepy, overlap in IRQ handler symbol.
nrf5/modules: Shortening down the device name to be advertised in the example to make it fit with a 128-bit complete UUID.
nrf5/modules: Bugfix in ubluepy_uuid_make_new. Used wrong buffer to register vendor specific uuid to the bluetooth stack.
nrf5/sdk: Updating advertisment function in bluetooth le driver to add 128-bit complete service UUID provided in service list to the advertisment packet.
nrf5/sdk: Updating advertisment funciton in bluetooth le driver to iterate through services passed in and calculate individiual uuid sizes.
nrf5/modules: Updating advertisment method in peripheral class to memset advertisment structure. Also applying service list if set to the advertisment structure.
nrf5/modules: Updating ubluepy module header usage example. Correcting enum for UUID types to start index from 1. Expanding advertisment data structure to also include service list members.
nrf5/sdk: Adding static boolean for keeping track of whether advertisment is in progress in the bluetooth driver. Now, advertisment can be restarted with new data any time.
nrf5/modules: Updating ubluepy peripheral class to use mp_const_none instead of MP_OBJ_NULL for unset values in advertisment method parameter list. Adding extraction of the service list in the advertisment method. The list is not yet handled.
nrf5/modules: Adding a few examples in the modubluepy.h to get easier copy paste when implementing.
nrf5/sdk: Successful device name advertisment. Added flags to advertisment packet and enable device name byte copy into the advertisment data.
nrf5/modules: Turning ubluepy peripheral advertisment function into a keyword argument function so that it would be possible to set device name, service uuids, or manually constructed data payload.
nrf5/sdk: Updating softdevice driver with function to set advertisment data and start advertisment. Does not apply device name yet. Work in progress.
nrf5/modules: Adding new structure to ubluepy in order to pass advertisment data information to the bluetooth le stack.
nrf5/modules: Adding function function to add characteristics to the ubluepy service. Enable function in service's local dict table.
nrf5/modules: Adding function in bluetooth le driver to add characteristic to the bluetooth le stack.
nrf5/modules: Adding more members to ublue characteristic object structure.
nrf5/modules: Adding characteristic class to ubluepy globals table.
nrf5/modules: Updating ubluepy characteristic implementation.
nrf5/modules: Re-arranging includes in ubluepy_service.c
nrf5/modules: Adding ubluepy charactaristic type struct.
nrf5/modules: Updating ubluepy with more implementation in UUID and Service. Adding function in bluetooth le driver which adds services to the bluetooth stack. Making service take UUID object and Service type (primary/secondary) as constructor parameter in Service class.
nrf5: Adding ubluepy to include path.
nrf5/modules: Updating ubluepy UUID class constructor with some naive parsing of 128-bit UUIDs, and pass this to the softdevice driver for registration.
nrf5/sdk: Adding new function to the softdevice handler driver to add vendor specific uuids and return an index to the entry back by reference.
nrf5/modules: Updating ubluepy UUID class with constructor that can construct an object based on hex value of 16-bit or string of 16-bit prefixed with '0x'.
nrf5/modules: Adding Peripheral, Service and UUID class to the ubluepy module globals table.
nrf5/modules: Extending the implementation of Peripheral class in ubluepy.
nrf5/modules: Extending the implementation of UUID class in ubluepy.
nrf5/sdk: Adding configuration to enable the ubluepy peripheral class when using softdevice 132 from the SDK.
nrf5: Adding ubluepy module to builtins if bluetooth stack is selected. Disable NUS profile by default. Adding source for ubluepy module into makefile to be included in build. The source is only linked if MICROPY_PY_UBLUEPY is set.
nrf5: Aligning code after upmerge with master. Mostly FAT FS related updates. Not tested after merge.
nrf5/modules: Adding new and print function to ubluepy peripheral class. Template functions only.
nrf5/modules: Adding ubluepy UUID class template.
nrf5/modules: Adding ubluepy characteristic class template.
nrf5/modules: Adding missing #endif. Also adding to property templates to the lolcal dict.
nrf5/modules: Adding ubluepy service class template.
nrf5/modules: Updating ubluepy with class function placeholders.
nrf5/modules: Renaming ble module folder to ubluepy.
nrf5/modules: Adding new template file for ubluepy Peripheral class.
nrf5/pyb: Moving pyb module into modules/pyb.
nrf5/utime: Moving utime module into modules/utime.
nrf5/uos: Moving uos module into modules/uos.
nrf5/network: Moving network module into modules/network. Adding include path to network as its needed by the usocket module.
nrf5/usocket: Moving usocket module into modules/usocket.
nrf5/led: Moving led module into modules/machine.
nrf5/led: Moving led module into modules/machine.
nrf5/pwm: Moving pwm module into modules/machine.
nrf5/rtc: Moving rtc module into modules/machine.
nrf5/timer: Moving timer module into modules/machine.
nrf5/pin: Moving pin module into modules/machine.
nrf5/adc: Moving adc module into modules/machine.
nrf5/i2c: Moving i2c module into modules/machine.
nrf5/spi: Moving spi module into modules/machine.
nrf5/uart: Moving uart module into modules/machine to start converting it into machine module and not pyb.
nrf5/machine: Moving modmachine into modules/machine folder. Updating Makefile.
nrf5/drivers: Renaming folder to modules.
nrf5: Renaming python modules folder to freeze to give the folder its right meaning. The scripts put into this folder will be frozen.
nrf5/drivers: Adding template for ubluepy module.
nrf5/sdk: Adding compilation config whether to include BLE NUS implementation. Config found in sdk/nrf5_sdk_conf.h. NUS enabled for s132 targets by default.
nrf5: Fallback to HW UART when not Bluetooth LE UART has been enabled.
nrf5: Updating main.c to use MICROPY_PY_BLE_NUS as switch for regular uart initialization or bluetooth le uart initialization.
nrf5/sdk: Adding work-in-progress script to connect to bluetooth le REPL using bluepy python module in linux.
nrf5/boards: Updating board makefiles for s132 and s1xx target for pca10040 (nrf52832) by adding sub variant and device define to the makefiles.
nrf5/examples: Updating ssd1306.py example with a comment describing proceedure on how to use the I2C variant of the driver.
nrf5/hal: Line wrapping params in hal_spi.c to make it easier to read.
nrf5/hal: Updating hal_twi.c tx implementation to a working state. STARTTX only issued once, before looping bytes.
nrf5/examples: Updating ssd1306.py driver to work with i2c master write implementation.
nrf5/hal: Updating hal_twi.c with tx function. Gets multiple startup bytes for each clocked byte.
nrf5/hal: Updating hal_twi.c with tx function which partly works. Bytes are clocked out a bit out of order.
nrf5/hal: Started implementation of hal_twi.c (non-DMA). Init function started.
nrf5: Removing hal_twie.c from being compiled in.
nrf5: Renaming configuration define in board configs using i2c from MICROPY_PY_MACHINE_HW_I2C to MICROPY_PY_MACHINE_I2C as the config is overlapping with the latter.
nrf5: Renaming configuration define in board configs using i2c from MICROPY_PY_MACHINE_HW_I2C to MICROPY_PY_MACHINE_I2C as the config is overlapping with the latter.
nrf5: Making i2c configurable from board configuration in case board has to sacrifice the i2c machine module.
nrf5/boards: Activating all display drivers in pca10056 board.
nrf5/boards: Updating s110 SD linker script for micro:bit.
nrf5/i2c: Making use of hal twi tx function in writeto function.
nrf5/hal: Updating twi driver with template functions.
nrf5/hal: Updating TWI DMA implementation. Suspend not working on tx. Rx not implemented yet.
nrf5/hal: Updating twi master tx with stop parameter.
nrf5/hal: Adding i2c master functions for tx and rx in hal header.
nrf5/hal: Adding new macros functions to mphalport.h which are used by extmod i2c machine module.
nrf5/i2c: Adopting use of extmod/machine_i2c module as base for port's machine i2c module.
nrf5/i2c: Backing up before trying out extmod i2c integration.
nrf5: Adding i2c class to machine module globals table.
nrf5: Updating main.c to initialize the i2c machine module if selected.
nrf5/i2c: Updating i2c machine module with new constructor parameters to set scl and sda pins. Also updating print funciton to debug pin number and port number for the gpio set.
nrf5/i2c: Updating i2c module to new new hal api, as master is initialized with its own init function.
nrf5/hal: Adding members to TWI config struct, device address and scl/sda pin. Renaming and adding function such that twi slave and master has seperate init function. Started implementation of master init function for nrf52 using DMA (hal_twie.c).
nrf5/i2c: Updating module to use new struct layout from hal_twi.h
nrf5/hal: Updating TWI with frequency enums.
nrf5/examples: Updating game file to use ssd1305 display driver.
nrf5/drivers: Updating examples in comment in oled ssd1305 object to use the draw module.
nrf5/hal: Fixing nrf51 SPI pin configuration to use pin member of struct.
nrf5/boards: Updating boards to comply to new style of configuring pins for uart and spi.
nrf5/boards: Updating board configuration for pca10056 (nrf52840) with new pin configuration scheme for SPI and UART.
nrf5/hal: Updating hal QSPI header with define guard to filter out usage of undefined structures and names when compiling against non-52840 targets.
nrf5/drivers: Updating display objects to use new SPI pin configuration in print function.
nrf5/hal: Updating SPI DMA variant with more frequencies, and allowing rx and tx buffers to be NULL.
nrf5/uart: Updating uart module to use new config hal config structure members for pins. Changing board config provided pins to use const pointers from generated pins instead of pin name.
nrf5/hal: Updating uart hal to use pointers to Pin objects instead of uint pin and port number.
nrf5/hal: Updating uart hal to use pointers to Pin objects instead of uint pin and port number.
nrf5: Updating modmachine to add SPI in globals dict when MICROPY_PY_MACHINE_HW_SPI define is set. This diverge from regular MICROPY_PY_MACHINE_SPI config. Fixes missing SPI in the machine module after renaming port SPI enable define.
nrf5: Updating main.c to enable SPI if MICROPY_PY_MACHINE_HW_SPI is set. This diverge from regular MICROPY_PY_MACHINE_SPI config. Fixing missing init of SPI after renaming port SPI enable define.
nrf5/spi: Adding multiple instances of machine SPI depending on which chip is targeted (nrf51/nrf52832/nrf52540). Updating board config requirement to give variable name of const pointer to Pin instead of a Pin name. Adding support of giving keyword set mosi/miso/clk pin through constructor.
nrf5/hal: Updating SPI hal with full list of SPI interfaces as lookup tables for all devices. Updating init struct to pass Pin instance pointers instead of uint pin number and ports.
nrf5/drivers: Activate ssd1289 object in the display module.
nrf5/boards: Adding ssd1289 lcd module in pca10040 (nrf52832) board.
nrf5: Adding ssd1289 driver and python module into build.
nrf5/drivers: Adding ssd1289 lcd tft driver and python module.
nrf5/hal: Fixing compile issues in quad SPI driver.
nrf5/hal: Updating Quad SPI hal driver.
nrf5/hal: Aligning assignment in hal_adc.c
nrf5/hal: Adding more types to quad SPI header.
nrf5: Syncing code after upmerge with master.
nrf5/hal: Updating clock frequency enums and lookup table for quad spi.
nrf5/hal: Adding QSPI base and IRQ num in c-file.
nrf5/hal: Adding hal template files for 32mhz Quad SPI peripheral.
nrf5/drivers: Optimizing update_line in ili9341 driver a bit.
nrf5/drivers: Adding space in macro.
nrf5/drivers: Adding rgb16.h with macro to convert 5-6-5 rgb values into a 16-bit value.
nrf5: Adding configuration defines for SSD1289 lcd driver.
nrf5: Removing old framebuffer implementation.
nrf5: Remove old framebuffer implementation from being included into the build.
nrf5/drivers: Enable framebuffer and graphics module to be compiled in by default if display is selected into the compilation.
nrf5/drivers: Updating epaper driver sld00200p to use new framebuffer.
nrf5/drivers: Removing debug printf's from epaper display python module.
nrf5/drivers: Updating python example in comment for ls0xxb7dxx display module.
nrf5/boards: Enable LS0XXB7DXXX display module in pca10056 board config.
nrf5/drivers: Adding ls0xxb7dxx to display module.
nrf5: Adding ssd1305 and ls0xxb7dxxx (sharp memory display) drivers to be included in build.
nrf5/drivers: Updating sharp memory display driver and python module to a working state.
nrf5/spi: Adding posibility to configure SPI firstbit mode to LSB or MSB. Default is MSB. Updating python module and hal driver.
nrf5/drivers: Tuning memory lcd driver a bit. Fixing small mp_printf usage bug.
nrf5/drivers: Adding sharp memory display driver. For now hardcoded to 2.7 inch variant.
nrf5: Adding configuration define for sharp memory display series in mpconfigport.h preparing for driver to be included.
nrf5/boards: Enable ssd1305 oled display to be default for pca10028 for now.
nrf5/drivers: Adding ssd1305 oled driver. This is very similar to ssd1306, so a merge will happen soon.
nrf5/drivers: Adding ssd1305 oled driver. This is very similar to ssd1306, so a merge will happen soon.
nrf5/drivers: Updating ili9341 display object to use new framebuffer.
nrf5/drivers: Updating ili9341 driver to use new framebuffer, and removing the compressed param from the line update function.
nrf5: Adding micropython mem_info() to be included in mpconfigport.h.
nrf5/drivers: Adding example in comment on how to use the ili9341 driver with nrf51/pca10028 board.
nrf5/examples: Adding a extra global variable to the game which breaks the game execution.
nrf5/examples: Adding 2048 game using OLED SSD1306 128x64 display and analog joystick.
nrf52/boards: Increasing the stack and heap in pca10056 (nrf52840) target from 2k/32k to 40k/128k to debug some buffer problems when running large frozen python programs.
nrf51/boards: Increasing heap and stack size in the pca10028 board.
nrf51/boards: Enable display driver and oled ssd1306 (also bringing in framebuffer and graphics module) into the pca10028 target.
nrf5: Enable display/framebuffer.c and graphic/draw.c into the build.
nrf5/drivers: Adding defines to exclude implementation of draw.c module if not enabled.
nrf5: Adding configuration defines for the graphics module (draw) and enabling this by default if using oled ssd1306 display which has a compatible python object definition.
nrf5/drivers: Adding draw module with circle, rectangle and text functions. Can be used by any display object which implements display callback functions.
nrf5/drivers: Moving oled ssd1306 driver over to new framebuffer layout. Moving some of the draw algorithms into the object in order to optimize the speed on writing data from the framebuffer.
nrf5/hal: Removing stdio.h include in adce.c which were used for debugging.
nrf5/boards: Adding ADC pins in pins.csv file for pca10056 (nrf52840).
nrf52/hal: Adding adce (saadc) implementation for nrf52 to sample values on a channel.
nrf5/adc: Adding all 8 instances to adc python module. Valid for both nrf51 and nrf52.
nrf5/drivers: Adding new structures to moddisplay. Adding a display_t structure to cast all other displays into, to retrieve function pointer table of a display object type. Also adding the function table structure which needs to be filled by any display object.
nrf5/drivers: Adding a new framebuffer implementation to replace the mono_fb.
nrf5/boards: Updating pca10028 (nrf51) board config. Enable SPI machine module. Enable flow control on UART. Correcting SPI CLK, MISO and MOSI pin assignments.
nrf5/adc: Updating adc module and hal with a new interface. No need for keeping peripheral base address in structure when there is only one peripheral (nrf51).
nrf5/rtc: Correcting RTC1 base error in rtc template.
nrf5: Adding adc module to machine module.
nrf5/hal: Updating hal_adc* with more api functions.
nrf5/adc: Adding updated adc module.
nrf5/boards: Enabling ADCE (SAADC) variant of adc hal to match hardware on nrf52 series.
nrf5/boards: Adding ADC config to pca10028 pins.csv
nrf5/boards: Tuning linker script for nrf51822_ac to get some more heap.
nrf5: Updating nrf51_af.csv to reflect pins having ADC on the chip.
nrf5/boards: Updating make-pins.py to generate ADC pin settings from board pins.csv.
nrf5/hal: Updating hal_adc header to use correct Type for ADC on nrf52.
nrf5/adc: Updating module to compile.
nrf5/boards: Enable ADC machine module for pca10028, pca10040 and pca10056.
nrf5: Add add ADC machine module into build.
nrf5: Adding new config for ADC module in mpconfigport.h.
nrf5/adc: Adding ADC machine module base files. Implementation missing.
nrf5: Adding hal_adc* into build.
nrf5/boards: Enable ADC/SAADC hal for pca10028 (nrf51), pca10040 (nrf52832) and pca10056 (nrf52840) boards.
nrf5/hal: Removing chip variant guard for hal_adc*, and let this be up to the hal conf file to not mess up at the moment.
nrf5: Add i2c.c, i2c machine module, and hal_twi into build.
nrf5/boards: Enable hardware I2C machine module for pca10028 (nrf51), pca10040 (nrf52832) and pca10056 (nrf52840) boards.
nrf5/boards: Enable TWI hal for pca10028 (nrf51), pca10040 (nrf52832) and pca10056 (nrf52840) boards.
nrf5/i2c: Adding files for hardware i2c machine module and adding config param in mpconfigport to disable by default.
nrf5/hal: Adding template files for TWI (i2c) hal.
nrf5/hal: Adding template files for ADC hal.
nrf5/drivers: Correcting tabbing in oled ssd1306 c-module.
nrf5/boards: Enable SSD1306 spi driver for pca10040 (nrf52832) and pca10056 (nrf52840) boards.
nrf5/drivers: Adding SSD1306 SPI display driver. Not complete, but can do fill screen operation atm.
nrf5/drivers: Adding epaper display example script in comment for pca10056 / nrf52840 in the display module.
nrf5/boards: Enable PWM module and epaper display module in pca10056 board config.
nrf5/drivers: Adding some more delay on bootup to ensure display recovers after reset.
nrf5/examples: Adding copy of ssd1306.py driver hardcoded with SPI and Pin assignments.
nrf5/drivers: Updating ili9341 driver to set CS high after cmd or data write.
nrf5/drivers: Extending print function for ili9341 object to also print out gpio port of the SPI pins.
nrf5/boards: Giving a bit more heap for nrf52840 linker script.
nrf5/drivers: bugfix of the sld00200p driver. Stopping the pwm instead of restarting it. Shuffle placement of static function.
nrf5/drivers: Correcting object print function to also include port number of the SPI pins. Correcting usage script example in comment.
nrf5/drivers: Adding an initial script as comment for ili9341 on nrf52840/pca10056 in the driver module comment.
nrf5/examples: Removing tabs from epaper python script usage comment, so that it is easier to copy paste.
nrf5/hal: Refining if-defs to set up GPIO base pointers in mphalport.h
nrf5/devices: Removing define which clutters ported modules from nrf.h.
nrf5/boards: Enabling spi in pca10056 hal config.
nrf5/boards: Enabling ili9341 display drivers and to be compiled in on pca10056 target board. Updating SPI configuration with gpio port.
nrf5/boards: Enabling display drivers/spi/pwm to be compiled in on pca10040 target board. Updating SPI configuration with gpio port.
nrf5/hal: Correcting SPI psel port position define name to the one defined in nrf52840_bitfields.h
nrf5/led: Hardcoding GPIO port 0 for Led module for now.
nrf5/hal: Changing import of nrf52 includes in hal_uarte.c to not be explicit. Now only nrf.h is included.
nrf5: Updating pin, spi and uart to use port configuration for gpio pins. Update pin generation script, macros for PIN generation. Updating macros for setting pin values adding new port parameter to select the correct GPIO peripheral port.
nrf5/boards: Disable SPI hal from pca10001 board.
nrf5/boards: Disable SPI/Timer/RTC hal from microbit board.
nrf5: Exclude import of pwm.h in modmachine.c if MICROPY_PY_MACHINE_PWM is not set, as nrf51 does not yet have this module yet.
nrf5: Exclude import of pwm.h in main.c if MICROPY_PY_MACHINE_PWM is not set, as nrf51 does not yet have this module yet.
nrf5/drivers: Block nrf51 from compiling epaper_sld00200p for the moment. There is no soft-pwm present yet, and including pwm would just make compilation fail now.
nrf5/hal: Making nrf51/2_hal.h go trough nrf.h to find bitfields and other mcu headers instead of explicit include.
nrf5/boards: Adding more pins to nrf52840 / pca10056 target board.
nrf5/pin: Adding more pins to nrf52_af.csv file for nrf52840. Port '1' will be prefixed 'B'.
nrf5/pin: Adding PORT_B to Pin port enum to reflect gpio port 1 on nrf52840.
nrf5/boards: Updating all board configs with gpio port configuration for uart/spi pins. Leds still not defined by gpio port.
nrf5/devices: Updating header files for nrf51 and nrf52. Adding headers for nrf52840.
nrf5: Updating to use new nrfjprog in makefile. Needed for nrf52840 targets. Changed from pinreset to debug reset.
nrf5/boards: Updating makefiles to use system.c files based on sub-variant of mcu.
nrf5/devices: Renaming system.c files for nrf51 and nrf52 to be more explicit on which version of chip they are referring to.
nrf5/drivers: Backing up working epaper display (sld00200p shield) driver before refactoring.
nrf5/drivers: Fixing parenthesis in ILI9341 __str__ print function.
nrf5/pwm: Moving out object types to header file so that it can be resused by other modules.
nrf5/drivers: Updating a working version of ili9341 module and driver. About 10 times faster than python implementation to update a full screen.
nrf5: Started to split up lcd_mono_fb such that it can be used as a c-library and python module with the same implementaton.
nrf5/hal: Adding include of stdbool.h in hal_spi.h as it is used by the header.
nrf5/drivers: Adding preliminary file for ili9341 lcd driver.
nrf5/hal: Adding support for NULL pointer to be set if no rx buffer is of interest in SPI rx_tx function.
nrf5: Adding ili9341 class and driver files in Makefile to be included in build.
nrf5/drivers: Adding template files for upcomming ili9341 driver.
nrf5/drivers: Adding lcd ili9341 object implementation to make a new instance. print implemented for debugging pins assigned to the display driver. No interaction yet with the hal driver.
nrf5/drivers: Adding ILI9341 class to the display global dict.
nrf5/boards: Changing tft lcd display name from SLD10261P to ILI9341 in pca10040 board configuration.
nrf5: Moving out mp_obj_framebuf_t to the header file to get access to it from other modules. Exposing helper function to make new framebuffer object from c-code.
nrf5: Trimming down display configurations in mpconfigport.h
nrf5/spi: Moving *_spi_obj_t out of implementation file to header. Setting hal init structure in the object structure instead of making a temp struct to configure hal. This would enable lookup of the spi settings later.
nrf5: Removing epaper, lcd and oled modules from Makefile source list as the display modules has been moved to display root folder.
nrf5/drivers: Removing one level of module hierarchy in display drivers. Removed epaper, lcd and oled modules, making import of classes happen directly from display module.
nrf5/drivers: Creating python object implementation (locals) to be used for epaper sld00200p.
nrf5: Moving color defines in lcd_mono_fb from .c to .h so that it can be reused by other modules.
nrf5: Enable MICROPY_FINALISER and REPL_AUTO_INDENT.
nrf5/drivers: Adding requirement for nrf52 target on the epaper sld00200p for now. There is no ported PWM module for nrf51 target yet. Hence, soft PWM for nrf51 needs to be added.
nrf5: Adding suffix to _obj on epaper_sld00200p module.
nrf5: Correcting define name for epaper sld00200p, missing 0.
nrf5/drivers: Enable EPAPER_SLD00200P in epaper module globals table.
nrf5/drivers: Adding missing file for epaper module / driver.
nrf5/modules: Moving python scripts to examples folder to free up some flash space on constrained targets as modules folder is used as frozen files folder.
nrf5/boards: Enable display module to be built in. Also adding one epaper display and one tft lcd to test display module when porting the corresponding drivers to micropython.
nrf5/drivers: Removing external decleration of display module in header.
nrf5/drivers: Renaming display module to mp_module prefix as it is going to be inbuilt. ifdef'ing all submodules based on type of display configured through mpconfigport.h
nrf5/drivers: Adding ifdef sourrounding the implementation of module. Configurable with mpconfigport.h.
nrf5: Adding display module to port builtins.
nrf5/drivers: Adding driver files to makefile. Implicitly adding display module.
nrf5/drivers: Adding template for c-implementation of lcd, epaper and oled drivers as a display module.
nrf5/modules: Updating to correct name of display in epaper driver.
nrf5/modules: Adding python epaper display driver. Currently colors have been reversed.
nrf5/hal: Fixing bug in mp_hal_pin_read in mphalport.h which tried to read an OUT register. Corrected to read the IN register.
nrf5: Adding sleep_us to modutime.c and exposing mp_hal_delay_us in hal/hal_time.h
nrf5/lcd: Updating framebuffer with double buffer for epaper displays. Moving statics into instance struct. Adding new function to refresh using old buffer, such that epaper can get a cleaner image after update.
nrf5/boards: Adding initial microbit build files and board configurations.
nrf5: Makefile option to set FLASHER when doing flash target. If defined in board .mk file, this will be used, else nrfjprog will be used by default (segger). This opens up for using pyocd flashtool and still run 'make flash'.
nrf5/boards: Updating pca10028 board config to not define RTS/CTS pins when HWFC is set to 0.
nrf5/uart: Making compile time exclusion of RTS/CTS if not defined to use flow control by board configuration.
nrf5/spi: Removing automatic chip select (NSS) in hal_spi.c. Also removing configuration of this pin as it is confusing to pass it if not used. User of SPI has to set the NSS/CS itself.
nrf5/modules: Updating PWM test python script to cope with new api.
nrf5/hal: Fixing some issues in PWM stop function. Doing a proper stop and disable the peripheral.
nrf5/pwm: Implementing start and stop call to hal on init and deinit as hal_init does not longer start the PWM automatically.
nrf5/hal: Exposing two new PWM hal functions start() and stop().
nrf5/hal: Moving enablement of PWM task from init to a start function. Also activating code in stop function to stop the PWM.
nrf5/modules: Adding licence text on seeedstudio tft shield python modules.
nrf52/boards: Tuning linker script for nrf52832 when using iot softdevice. Need more heap for LCD framebuffer.
nrf5/lcd: Adding lcd_mono_fb.c to source list in the makefile. Adding define in implementation to de-select the file from being included. Adding module to PORT BUILTIN in mpconfigport.h
nrf52/sdk: Correcting path to iot softdevice if SDK is enabled.
nrf5: Adding help text for CTRL-D (soft reset) and and CTRL-E (paste mode) in help.c
nrf5: Adding handling of CTRL+D to reset chip in main.c. Call to NVIC System Reset is issued.
nrf5/lcd: Correcting indention (tabs with space) in framebuffer module source and header.
nrf5/lcd: Changing framebuffer to use petme128 8x8 font. This is vertical font. Code modified to flip and mirror the font when rendering a character. Adding copy of the font from stmhal.
nrf5/modules: Adding new driver for seeedstudio tft shield v2, using new framebuffer module which handles faster update on single lines, callback driven write on each line which is touched in the framebuffer.
nrf5/lcd: Adding header file for lcd_mono_fb.
nrf5/lcd: Updating brackets in framebuffer module.
nrf5/lcd: Renaming variable name from m_ to p_
nrf5/lcd: Cleaning up a bit in lcd framebuffer.
nrf5/lcd: Adding work in progress monochrome lcd framebuffer driver which only updates modified (dirty) display lines.
nrf5/modules: Updating pulse test to set output direction on the LED pin used in the test.
nrf5/modules: Updating seeedstudio tft lcd driver to render using already existing framebuffer implementation.
nrf5/boards: Bouncing up heap to 32k on pca10040 to allow for application to allocate 9600bytes+ framebuffer when using LCD screen (240x320).
nrf5/modules: Adding a function to get access to the SD card flash drive on the seeedstudio tft shield.
nrf5/modules: Adding new python script to initialize and clear the display on Seeedstudio 2.8 TFT Touch Shield v2.
nrf5/modules: Updating documentation on sdcard.py copy to use new params in the example description
nrf5/modules: Updating mountsd, SD card test script with new params.
nrf5/pin: Merging input and output pin configuration to one comon function. Adding implementation in Pin class to be able to configure mode and pull. Updating drivers which uses gpio pin configuration to use new function parameters.
nrf5: Adding rtc.c which implements the machine rtc module to be included in build.
nrf5/boards: Enable MICROPY_PY_MACHINE_RTC in pca10028 (nrf51) and pca10040 (nrf52) targets.
nrf5/hal: Adding empty init function in hal_rtc.c
nrf5/hal: Adding structures and init function prototype to hal_rtc.h.
nrf5: Setting MICROPY_PY_MACHINE_RTC to disabled by default (during development) in mpconfigport.h. This can be overriden by board config.
nrf5/rtc: Adding skeleton for machine rtc module for nrf51/52.
nrf5: Adding timer.c which implements the machine timer module to be included in build.
nrf5: Setting MICROPY_PY_MACHINE_TIMER to disabled by default (during development) in mpconfigport.h. This can be overriden by board config.
nrf5/boards: Enable MICROPY_PY_MACHINE_TIMER in pca10028 (nrf51) and pca10040 (nrf52) targets.
nrf5: Adding initialization of timer module if enabled by MICROPY_PY_MACHINE_TIMER.
nrf5/timer: Adding initializaton of id field for Timer_HandleTypeDef's. Adding simple print function. Adding make_new function. Enabling the functions in machine_timer_type.
nrf5/hal: Adding empty init function in hal_timer.c
nrf5/hal: Adding structures and init function prototype to hal_timer.h.
nrf5/timer: Adding skeleton for machine timer module for nrf51/52.
nrf/boards: Adding RTC and TIMER hal to be linked in when implemented. Enable one board for nrf51 and one for nrf52 for ease of debugging when implementing the hal.
nrf5: Adding rtc and timer hal to Makefile.
nrf5/hal: Adding skeleton files for rtc and timer driver.
nrf5/modules: Updating pulse example to work with Pin object instead of hard coded pin number.
nrf5/pwm: Switching from hardcoded pin number to Pin object type as input to the new() function. Also changing the parameter from kw to arg.
nrf5/modules: updating test python file with correct PWM frequency type.
nrf5/modules: Adding a python test file with function to dim a specific led (17).
nrf5/pwm: Updating pwm module with freq function which re-initilises the PWM instance such that new frequency will be applied.
nrf5/pwm: Initializing pwm instances in main.c if enabled by MICROPY_PY_MACHINE_PWM.
nrf5/pwm: Adding api to initialize pwm instances.
nrf5: Updating mpconfigport.h to set a default for PWM machine module to be enabled by default, if not disabled in a board config. Refactoring order in the file.
nrf52: Set names to be used on PWM0-2 in board config. For nrf52840, the PWM3 is excluded as repo does not have latest headers to reflect this yet. Bump up to be done soon.
nrf52: Enable PWM HAL for both pca10040 (nrf52832) and pca10056 (nrf52840).
nrf51: Disable MICROPY_PY_MACHINE_PWM for now in all nrf51 target boards as sw impl. is not yet included in the repo.
nrf5: Only enable hal_pwm.c if nrf52 target as nrf51 must have a sw implementation.
nrf5/pwm: Adding pwm to modmachine.c
nrf5/hal: Updating PWM header file with init function prototype. Also added PWM_HandleTypeDef structure that can be used in the pwm python module.
nrf5/pwm: Updating PWM dict table to have freq and duty function. Also added creation of default objects based on PWM name set in board config. Adding ifdef surrounding the import of hal_pwm.h as this module might be used by software implmentation of PWM later.
nrf5/pwm: Removing include of hal_pwm.h as pwm.c might not use a hal, but sw implementation.
nrf5: Updating makefile to compile in pwm.c and hal_pwm.c
nrf5/boards: Adding config flag for HAL_PWM in pca10040 and pca10056.
nrf5: Adding pwm work in progress machine PWM module.
nrf5/hal: Starting implementation of PWM hal to be used by PWM python module later.
nrf5: Adding initial board files for pca10056. The files are not complete (only 32 pins are added for now). UART REPL, leds, and Pins (up to 31) are functional.
nrf5: Updating comment in linker script for nrf52832 and nrf52840 to distinguish between the two nrf52 variants.
nrf5: Adding new linker script for nrf52840.
nrf5: updating flash size comment in nrf52832 linker script.
lib/netutils: Adding some basic parsing and formating of ipv6 address strings. Only working with full length ipv6 strings. Short forms not supported at the moment (for example FE80::1, needs to be expressed as FE80:0000:0000:0000:0000:0000:0000:0001).
nrf5: Updating port with new content. SPI, SDcard (trough sdcard.py), Pin, and machine module. Also adding some basic modules depending on SDK and bluetooth stack from nordic semiconductor. NUS is module copied from original port by tralamazza, and new basic module for 6lowpan over BLE which can be used by modnetwork and modusocket. Basic BLE module to enable bluetooth stack and start a eddystone advertisment is kept, and still works without SDK, even if in the SDK folder (its placed there as it needs bluetooth stack from an SDK).
Renaming softdevice folder to sdk.
Removing unused 'NRF_SOFTDEVICE' compile variable from all board .mk softdevice targets.
Fixing main Makefile CFLAGS concatination error when setting softdevice param
Daniel Tralamazza <daniel@tralamazza.com>
ignore default build folders
move softdevice (SD) specific code from the main Makefile to their respective board/SD makefiles
Glenn Ruben Bakke <glennbakke@gmail.com>
Updating Makefile by removing unwanted LDFLAG setting cpu to cortex-m0 in all cases.
Updating modble.c method doc of address_print() to reflect the actual function name.
Base support for nrf51 and nrf52 base without depending on SDK. SoftDevice usage optional.
Daniel Tralamazza <daniel@tralamazza.com>
remove dup declaration mp_builtin_open_obj
init
Date of "init" commit: Wed Jun 22 22:34:11 2016 +0200
|