Commit Graph

226 Commits

Author SHA1 Message Date
Dan Halbert 367e13c69f change CIRCUITPY change markers to CIRCUITPY-CHANGE 2023-10-19 16:42:36 -04:00
Dan Halbert f2ebe6839c Initial MicroPython v1.21.0 merge; not compiled yet 2023-10-18 17:49:14 -04:00
Dan Halbert 0d4bc8c163 initial v1.19.1 merge; not compiled yet 2023-08-01 13:50:05 -04:00
Jeff Epler 2315b62bff
Remove unused static qstrs
These are turned into TRANSLATE() messages now, so the qstr version
would not be used.
2022-11-30 12:06:15 -06:00
Damien George ac2293161e py/modsys: Add optional mutable attributes sys.ps1/ps2 and use them.
This allows customising the REPL prompt strings.

Signed-off-by: Damien George <damien@micropython.org>
2022-03-10 10:58:33 +11:00
Jeff Epler 01cabb0324 Merge tag 'v1.18'
Boosted performance, board.json metadata, more mimxrt, rp2, samd features

This release of MicroPython sees a boost to the overall performance of the
VM and runtime.  This is achieved by the addition of an optional cache to
speed up general hash table lookups, as well as a fast path in the VM for
the LOAD_ATTR opcode on instance types.  The new configuration options are
MICROPY_OPT_MAP_LOOKUP_CACHE and MICROPY_OPT_LOAD_ATTR_FAST_PATH.  As part
of this improvement the MICROPY_OPT_CACHE_MAP_LOOKUP_IN_BYTECODE option has
been removed, which provided a similar map caching mechanism but with the
cache stored in the bytecode, which made it not useful on bare metal ports.
The new mechanism is measured to be at least as good as the old one,
applies to more map lookups, has a constant RAM overhead, and applies to
native code as well as bytecode.

These performance options are enabled on the esp32, mimxrt, rp2, stm32 and
unix ports.  For esp32 and mimxrt some code is also moved to RAM to further
boost performance.  On stm32, performance increases by about 20% for
benchmarks that are heavy on name lookups, like misc_pystone.py and
misc_raytrace.py.  On esp32 performance can increase by 2-3x, and on mimxrt
it is up to 6x.

All boards in all ports now have a board.json metadata file, which is used
to automatically build firmware and generate a webpage for that board
(among other possibilities).  Auto-build scripts have been added for this
purpose and they build all esp32, mimxrt, rp2, samd and stm32 boards.  The
generated output is available at https://micropython.org/download.

Support for FROZEN_DIR and FROZEN_MPY_DIR has been deprecated for some time
and was finally removed in this release.  Instead of these, FROZEN_MANIFEST
can be used.  The io.resource_stream() function is also removed, replaced
by the pure Python version in micropython-lib.

The search order for importing frozen Python modules is now controlled by
the ".frozen" entry in sys.path.  This string is added by default in the
second position in sys.path.  User code should adjust sys.path depending on
the desired behaviour.  Putting ".frozen" first in sys.path will speed up
importing frozen modules.

A bug in multiple precision integers with bitwise of -0 was fixed in commit
2c139bbf4e.

The platform module has been added to allow querying the compiler and
underlying SDK/HAL/libc version.  This is enabled on esp32, mimxrt and
stm32 ports.

The mpremote tool now supports seek, flush, mkdir and rmdir on PC-mounted
filesystems.  And a help command has been added.

The documentation has seen many additions and improvements thanks (for a
second time) to the Google Season of Docs project.  The rp2 documentation
now includes a reference for PIO assembly instructions, a PIO quick
reference and a PIO tutorial.  The random and stm modules have been
documented, along with sys.settrace, manifest.py files and mpremote.  There
is also now more detail about the differences between MicroPython and
standard Python 3.5 and above.

The esp32 port sees support for ESP32-S3 SoCs, and new boards GENERIC_S3,
ESP32_S2_WROVER, LOLIN_S2_MINI, LOLIN_S2_PICO and UM_FEATHERS2NEO.  The PWM
driver has been improved and now supports all PWM timers and channels, and
the duty_u16() and duty_ns() methods, and it keeps the duty constant when
changing frequency.  The machine.bitstream() function has been improved to
use RMT, with an option to select the original bit-banging implementation.

The mimxrt port gained new hardware features: SDRAM and SD card support, as
well as network integration with a LAN driver.  The machine.WDT class was
added along with the machine.reset_cause(), machine.soft_reset(),
machine.unique_id() add machine.bitstream() functions.  DHT sensor support
was added, and f-strings were enabled.

The rp2 port now has support for networking, and bluetooth using NimBLE.
The Nina-W10 WiFi/BT driver is fully integrated and supported by the new
Arduino Nano RP2040 connect board.  I2S protocol support is added along
with a machine.bitstream() driver and DHT sensor support.  The PWM driver
had a bug fix with the accuracy of setting/getting the frequency, and the
duty value is now retained when changing the frequency.

On the samd port there is now support for the internal flash being a block
device, and for filesystems and the os module.  Pin and LED classes have
been implemented.  There are more time functions, more Python features
enabled, and the help() function is added.  SEEED_WIO_TERMINAL and
SEEED_XIAO board definitions are now available.

The stm32 port now has support for F427, F479 and H7A3(Q)/H7B3(Q) MCUs, and
new board definitions for VCC_GND_H743VI, OLIMEX_H407, MIKROE_QUAIL,
GARATRONIC_PYBSTICK26_F411, STM32H73B3I_DK.  A bug was fixed in the SPI
driver where a SPI transfer could fail if the CYW43 WiFi driver was also
active at the same time.

On the windows port the help() function has been enabled, and support for
build variants added, to match the unix port.

The zephyr port upgraded Zephyr to v2.7.0.

The change in code size since the previous release for various ports is
(absolute and percentage change in the text section):

       bare-arm:  -1520  -2.605%
    minimal x86:  -2256  -1.531%
       unix x64:   -457  -0.089%
    unix nanbox:   -925  -0.204%
          stm32:   +312  +0.079% PYBV10
         cc3200:   -176  -0.096%
        esp8266:   +532  +0.076% GENERIC
          esp32: +27096  +1.820% GENERIC
            nrf:   -212  -0.121% pca10040
            rp2:  +9904  +2.051% PICO
           samd: +35332 +33.969% ADAFRUIT_ITSYBITSY_M4_EXPRESS

The changes that dominate these numbers are:
- bare-arm, minimal: use of new MICROPY_CONFIG_ROM_LEVEL_MINIMUM option and
  subsequent disabling of remaining optional features
- unix, cc3200, nrf: general code size reductions of the core
- stm32: performance improvements, addition of platform module
- esp8266: enabling f-strings
- esp32: use of -O2 instead of -Os
- rp2: machine.I2S and other new hardware features
- samd: filesystem support and other new hardware features

Thanks to everyone who contributed to this release: Alan Dragomirecký,
Alexey Shvetsov, Andrew Leech, Andrew Scheller, Antoine Aubert, Boris
Vinogradov, Chris Boudacoff, Chris Fiege, Christian Decker, Damien George,
Daniel Gorny, Dave Hylands, David Michieli, Emilie Feral, Frédéric Pierson,
gibbonsc, Henk Vergonet, iabdalkader, Ihor Nehrutsa, Jan Hrudka, Jan Staal,
jc_.kim, Jim Mussared, Jonathan Hogg, Laurens Valk, leo chung, Lorenzo
Cappelletti, Magnus von Wachenfeldt, Matt Trentini, Matt van de Werken,
Maureen Helm, Michael Bentley, Michael Buesch, Mike Causer, Mike Teachman,
Mike Wadsten, Ned Konz, NitiKaur, oli, patrick, Patrick Van Oosterwijck,
Peter Boin, Peter Hinch, Peter van der Burg, Philipp Ebensberger, Pooya
Moradi, retsyo, robert-hh, roland van straten, Scott Armitage, Sebastian
Wicki, Seon Rozenblum, Sergei Silnov, Simon Baatz, Stewart Bonnick, stijn,
Tobias Thyrrestrup, Tomas Vanek, YoungJoon Chun.

What follows is a detailed list of changes, generated from the git commit
history, and organised into sections.

Main components
===============

all:
- remove MICROPY_OPT_CACHE_MAP_LOOKUP_IN_BYTECODE
- update Python formatting to latest Black version 21.12b0
- remove support for FROZEN_DIR and FROZEN_MPY_DIR

py core:
- parse: simplify parse nodes representing a list
- emitnative: ensure load_subscr does not clobber existing REG_RET
- mpconfig.h: define initial templates for "feature levels"
- vm: add a fast path for LOAD_ATTR on instance types
- map: add an optional cache of (map+index) to speed up map lookups
- builtinimport: forward all debug printing to MICROPY_DEBUG_PRINTER
- add wrapper macros so hot VM functions can go in fast code location
- runtime: fix crash when exc __new__ doesn't return an exc instance
- mpconfig.h: define the "extra" feature level
- mpconfig.h: revert MICROPY_REPL_INFO to disabled at all levels
- gc: add hook to run code during time consuming GC operations
- showbc: print unary-op string when dumping bytecode
- modsys: replace non-ASCII quote char with ASCII char
- runtime: allow types to use both .attr and .locals_dict
- lexer: support nested [] and {} characters within f-string params
- objfun.h: remove obsolete comments about entries in extra_args
- builtinimport: refactor module importing
- showbc: fix printing of raw bytecode header on nanbox builds
- modio: remove io.resource_stream function
- only search frozen modules when '.frozen' is found in sys.path
- mkrules.cmake: set frozen preprocessor defs early
- runtime: allow initialising sys.path/argv with defaults
- mpstate.h: only include sys.path/argv objects in state when enabled
- mpz: fix bugs with bitwise of -0 by ensuring all 0's are positive
- qstr: reset mpstate.qstr_last_chunk before raising an error
- modbuiltins: add additional macro for extending builtins
- mpconfig.h: define MICROPY_PY_USSL_FINALISER only if not defined

extmod:
- machine_i2c: make SoftI2C configurable via macro option
- machine_spi: make SoftSPI configurable via macro option
- modonewire: make _onewire module configurable via macro option
- machine_pwm: factor out machine.PWM bindings to common code
- move modnetwork and modusocket from stm32 to extmod
- modnetwork: add STA_IF and AP_IF constants
- modnetwork: add extended socket state
- modusocket: add read/write stream methods to socket object
- modnetwork: define network interfaces in port config files
- network_cyw43: make consistent use of STA and AP constants
- modnetwork: remove STM32 references
- modnetwork: remove modnetwork socket u_state member
- mpbthci.h: add mp_bluetooth_hci_uart_any prototype
- nimble: add nimble CMake fragment file
- add platform module
- moduplatform: improve implementation for PC ports
- vfs_posix_file: support MP_STREAM_POLL in vfs_posix_file_ioctl
- modbluetooth: add connection interval to gap_connect
- nimble: update to NimBLE v1.4
- nimble: remove workaround for OS_ENOMEM
- uasyncio: fix gather returning exceptions from a cancelled task
- uplatform: remove unused definitions
- uplatform: use generic custom platform string
- network_ninaw10: fix scan list order to match other NICs
- modbluetooth: support gap_connect(None) to cancel a connection
- modure: redirect regex debug printing to mp_printf
- network_ninaw10: fix config of AP mode
- network_ninaw10: disable active connections before connecting
- network_ninaw10: make NIC state persistent
- network_ninaw10: return -1 on timeout from recv/send
- network_ninaw10: make recv/recvfrom interchangeable
- moduplatform: detect xtensa arch
- modusocket: allow setting timeout on unbound sockets
- modusocket: initialise accepted socket state
- network_ninaw10: use socket timeout preset in modusocket
- modbluetooth: fix conditional compilation of ringbuf_put_uuid
- modbluetooth: put declaration of connect_cancel in correct place

shared:
- libc/string0: don't include string.h, and provide __memcpy_chk
- runtime/pyexec: cleanup EXEC_FLAG flag constants

drivers:
- ninaw10: add ublox Nina-W10 WiFi/BT module driver
- lsm6dsox: add LSM6DSOX driver and examples
- neopixel: avoid heap alloc in fill()
- ninaw10: fix BSSID byte order, and add null byte to ESSID
- ninaw10/nina_wifi_drv: fix DNS resolution

mpy-cross: no changes specific to this component/port

lib:
- mynewt-nimble: switch to the MicroPython fork of NimBLE
- asf4: point submodule to latest commit on circuitpython branch
- update pico-sdk to 1.3.0 and tinyusb to 0.12.0
- stm32lib: update library for L4 v1.17.0, new G4, WL, and MMC fixes
- stm32lib: update library for fix to F7 USB HS

Support components
==================

docs:
- library/os.rst: clarify littlefs requirements for block erase
- library/bluetooth.rst: update incorrect link to gatts_write
- make.bat: change Windows output dir from '_build' to 'build'
- library/machine.I2S.rst: specify that I2S.shift args are kw-only
- esp32: explain ESP32 PWM modes, timers, and channels
- rp2: add reference for PIO assembly instructions, and PIO tutorial
- library/random.rst: document the random module
- reference/mpremote.rst: add docs for mpremote
- reference/manifest.rst: add docs for manifest.py files
- library/stm.rst: document the stm module
- esp32/tutorial: add an example of peripheral control via regs
- rp2/general.rst: fix typo with missing spaces
- library/framebuf.rst: adjust dimensions in example
- library/rp2.rst: update function asm_pio_encode to add sideset_opt
- reference/filesystem.rst: add detail on how to use littlefs fuse
- rp2/quickref.rst: add section on PIO
- library/sys.rst: add docs for sys.settrace
- esp8266/tutorial: fix comments of FrameBuffer examples
- library/uasyncio.rst: detail exception behaviour in cancel/timeout
- library/machine.Timer.rst: document 'id' as positional-only arg
- library/machine.SPI.rst: add example SPI usage
- library/machine.Timer.rst: document `period` and `callback` args
- library/machine.Pin.rst: add Pin.ANALOG mode constant
- remove trailing spaces and convert tabs to spaces
- library/sys.rst: add note about '.frozen' as an entry in sys.path
- differences: document details of new PEPs/features in Python 3.5+
- update copyright year range to include 2022
- esp32: update RMT quickref example to match latest code

examples: no changes specific to this component/port

tests:
- perf_bench: use math.log instead of math.log2
- basics: add tests for type-checking subclassed exc instances
- micropython/const.py: add comment about required config for test
- cpydiff: clarify f-string diffs regarding concatenation
- basics/int_big_cmp.py: add more tests for big-int comparison
- extmod: skip uselect_poll_udp when poll() is not available

tools:
- autobuild: add auto build for GENERIC_C3_USB
- ci.sh: use IDF v4.4 as part of esp32 CI and build GENERIC_S3
- autobuild: add the MIMXRT1010_EVK board to autobuild
- ci.sh: use a specific ESP IDF v4.4 commit
- autobuild: add script to generate website board metadata
- dfu.py: make tool work with python3 when parsing DFU files
- autobuild: automatically build all mimxrt, rp2 and samd boards
- autobuild: automatically build all stm32 boards
- mpremote: implement seek and flush in ioctl method
- autobuild: automatically build all esp32 boards
- upip.py: support == to specify exact package version
- makemanifest.py: make str conversion compatible with Python 2
- makemanifest.py: merge make-frozen.py
- mpremote: add mkdir and rmdir to RemoteFS
- mpremote: add help command
- mpremote: add link to mpremote docs URL in help message
- upip.py: skip '.frozen' entry in sys.path for install path
- autobuild: build esp8266 OTA image with GENERIC_1M board
- ci.sh: upgrade Zephyr docker image to v0.21.0
- ci.sh: build zephyr nucleo_wb55rg to test zephyr bluetooth build

CI:
- workflows: use Python 3.8 for macos workflow
- workflows: add new workflow to build ports download metadata

The ports
=========

all ports:
- add board.json for all boards
- add images, features and urls to board.json
- add '.frozen' as the first entry in sys.path
- move '.frozen' to second entry in sys.path

bare-arm port:
- mpconfigport.h: use MICROPY_CONFIG_ROM_LEVEL_MINIMUM
- mpconfigport.h: disable remaining optional features

cc3200 port: no changes specific to this component/port

esp8266 port:
- boards/GENERIC: enable f-strings
- extract qstr from object when comparing keys in config()
- etshal.h: remove unneeded function declarations
- allow building a board to any dest directory

esp32 port:
- boards: add new FeatherS2-Neo board definition
- machine_timer: use tx_update member for IDF 4.4 and above
- add support for ESP32-S3 SoCs
- boards: add new GENERIC_S3 board definition
- machine_hw_spi: fix hardware SPI DMA channels for S2/S3
- boards: add board definition for ESP32-S2-WROVER module
- boards: add LOLIN_S2_MINI ESP32-S2 board
- machine_pwm: add support for all PWM timers and channels
- README: updated readme with req IDF vers for ESP32-S2, C3 and S3
- usb: add USB host connection detection for CDC serial output
- machine_pin: block out IO16 and IO17 when using SPIRAM on ESP32
- mpthreadport: fix TCB cleanup function so thread_mutex is ready
- main: add option for a board to hook code into startup sequence
- split out WLAN code from modnetwork.c to network_wlan.c
- enable optimisations and move code to iRAM to boost performance
- usb: improve speed of USB CDC output
- add specific deploy_s2.md instructions for esp32-s2
- boards/LOLIN_S2_MINI: add image to board.json
- boards: update board and deploy metadata for UM_xxx boards
- usb: further improve speed of USB CDC output
- boards/LOLIN_S2_PICO: add LOLIN_S2_PICO board definition files
- boards/ESP32_S2_WROVER: link to specific deploy_s2 instructions
- support building with latest IDF v5
- in machine_i2s, send null samples in underflow situations
- in machine_i2s, make object reference arrays root pointers
- add SDCard support for S3, and a GENERIC_S3_SPIRAM board
- boards/GENERIC_S3: enable BLE on ESP32 S3
- machine_pwm: implement duty_u16() and duty_ns() PWM methods
- extract qstr from object when comparing keys in config()
- machine_pin: make GPIO 26 usable for S2,S3 if SPIRAM not config'd
- machine_hw_spi: fix SPI default pins reordering on ESP32-S2/S3
- machine_hw_spi: set proper default SPI(id=1) pins on S2,S3 and C3
- machine_hw_spi: set proper default SPI(id=2) pins on S2 and S3
- boards: remove SPI pin defaults from GENERIC S2/S3 boards
- modnetwork: synchronize WiFi AUTH_xxx constants with IDF values
- machine_pwm: keep duty constant when changing frequency
- machine_bitstream: replace bit-bang code with RMT-based driver
- machine_i2s: add support for ESP-IDF 4.4
- machine_bitstream: fix signal duplication on output pins
- esp32: enable platform module with IDF version
- boards/GENERIC_D2WD: build with -Os optimisation
- esp32_rmt: install RMT driver on core 1
- machine_bitstream: reinstate bitstream bit-bang implementation

javascript port: no changes specific to this component/port

mimxrt port:
- sdcard: implement SDCard driver
- machine_bitstream: add bitstream function to machine module
- rework flash configuration
- sdram: add SDRAM support
- eth: add LAN support and integrate the network module
- modmachine: implement machine.WDT() and machine.reset_cause()
- boards: fix the D14/D15 pin assignment of MIMXRT1050/60/64_EVK
- hal: remove duplicate definitions from flexspi_hyper_flash.h
- dma_channel: fix the DMA channel management
- fix cycle counter for time.ticks_cpu() and machine.bitstream()
- add dht_readinto() to the mimxrt module, and freeze dht.py
- extend the help() message and README.md
- mpconfigport.h: enable f-strings
- modmachine: implement soft_reset() and unique_id() functions
- boards/make-pins.py: allow empty lines and comments in pins.csv
- optimize the runtime speed
- enable the platform module
- boards: add the Seeed ARCH MIX board
- boards: update the board.json files and add deploy_xx.md files
- fix mp_hal_quiet_timing_enter()/exit() so timer still runs
- support PWM using the FLEXPWM and QTMR modules
- define UART 0 on MIMXRT boards
- support selection of PHY type and address
- re-enable eth checksum creation by HW
- fix a tiny unnoticed bug in sdcard.c
- add a driver for the DP83848 PHY device
- refactor the reading of the machine id
- enable ticks_cpu at boot time for NDEBUG builds only
- use -Og instead of -O0 for DEBUG builds
- tidy up the board flash related files
- hal: allow readSampleClkSrc to be configured by a board
- enable MICROPY_PY_USSL_FINALISER

minimal port:
- mpconfigport.h: use MICROPY_CONFIG_ROM_LEVEL_MINIMUM
- Makefile: don't force a 32-bit build
- mpconfigport.h: disable features that are not needed

nrf port:
- Makefile: improve Black Magic Probe commands
- main: use VFS helper function to mount fs and chdir

pic16bit port: no changes specific to this component/port

powerpc port: no changes specific to this component/port

qemu-arm port: no changes specific to this component/port

rp2 port:
- mpconfigport.h: enable heapq module
- add support for bluetooth module using NimBLE
- add framework for networking
- mpconfigport.h: use the "extra" feature level
- enable optimisations (comp goto, map cache, fast attr)
- machine_i2s: add I2S protocol support
- add support for Nina-W10 WiFi/BT module
- boards: add support for Arduino Nano RP2040
- machine_bitstream: implement the machine.bitstream driver
- boards: add neopixel.py to manifest.py
- rp2_pio: support exec with sideset
- boards/PIMORONI_PICOLIPO_16MB: fix 16MB flash size
- boards: add PYBSTICK26 RP2040 board definition
- machine_uart: handle and clear UART RX timeout IRQ
- boards/ARDUINO_NANO_RP2040_CONNECT: set default I2C pins
- machine_pwm: fix PWM frequency setting
- machine_pwm: keep duty value when changing the frequency
- add support for DHT11 and DHT22 sensors
- CMakeLists.txt: allow a board to override PICO_BOARD
- boards/GARATRONIC_PYBSTICK26_RP2040: use correct pico-sdk board cfg

samd port:
- integrate latest asf4, add help, more time funcs and uPy features
- samd_soc: allow a board to configure the low-level MCU config
- add internal flash block device, filesystem and uos support
- add Pin and LED classes, and machine.unique_id
- boards/ADAFRUIT_FEATHER_M0_EXPRESS: update for flash and pins
- boards/ADAFRUIT_ITSYBITSY_M4_EXPRESS: update for flash and pins
- boards/MINISAM_M4: update for flash and pins
- boards/ADAFRUIT_TRINKET_M0: update for flash and pins
- boards/SAMD21_XPLAINED_PRO: update for flash and pins
- boards/SEEED_WIO_TERMINAL: add new board definition
- boards/SEEED_XIAO: add new board definition
- README.md: update README to reflect new features and boards

stm32 port:
- pin: enable GPIO clock of pin if it's constructed without init
- main: don't unconditionally enable GPIO A,B,C,D clocks
- boards/VCC_GND_H743VI: add board definition for VCC_GND_H743VI
- boards/OLIMEX_E407: add Ethernet RMII support
- boards/LEGO_HUB_NO6: remove user paths from cc2564 init file
- boards: remove trailing spaces, and add newline at end of file
- add basic support for STM32H750
- add support for H7A3(Q)/H7B3(Q), and STM32H73B3I_DK board defn
- suggest putting code in main.py not boot.py
- boards/make-pins.py: allow a CPU pin to be hidden
- boards/make-pins.py: allow empty lines and comments in pins.csv
- dma: add functions for external users of DMA to enable clock
- enable LOAD_ATTR fast path, and map lookup caching on >M0
- boards: add OLIMEX H407 board definition
- enable platform module
- extended flash filesystem space to 512K on H743 boards
- boards/NUCLEO_H743ZI: enable VfsLfs2 on NUCLEO_H743ZI(2) boards
- boards: add PF11-BOOT0 to stm32f091_af.csv
- machine_i2c: use hardware I2C for STM32H7
- sdram: enforce gcc opt, and use volatile and DSB in sdram_test
- usbd_cdc_interface: allow a board to hook into USBD CDC RX events
- mpbthciport: allow a board to hook BT HCI poll functions
- pendsv: allow a board to add entries for pendsv_schedule_dispatch
- boards: add images to board.json for Adafruit and VCC_GND boards
- uart: fix race conditions and clearing status in IRQ handler
- mpconfigport.h: use the "extra" feature level
- in machine_i2s, send null samples in underflow situations
- in machine_i2s, make object reference arrays root pointers
- led: support an extra 2 LEDs in board configuration
- boards/MIKROE_CLICKER2_STM32: add more detail to board.json
- boards: add new board MikroElektronika Quail, and F427 support
- main: run optional frozen module at boot
- sdio: don't explicitly disable DMA2 on deinit of SDIO
- dma: make DMA2_Stream3 exclusive to SDIO when CYW43 enabled
- boards: build NUCLEO_WB55 and STM32F769DISC without mboot enabled
- boards: add PYBSTICK26 F411 board definition
- boards/NADHAT_PYBF405: rename board to GARATRONIC_NADHAT_F405
- usb: use a table of allowed values to simplify usb_mode get/set
- boards/NUCLEO_WB55: update rfcore_firmwre for new WS
- flashbdev: support generic flash storage config via link symbols
- boards: convert F413,F439,H743,L4xx,WB55 to new flash FS config
- add support for F479 MCUs
- include HAL MMC code in F4 builds
- boards/make-pins.py: use cpu pins to define static alt-fun macros
- boards/NUCLEO_WB55: fix LED ordering
- boards/LEGO_HUB_NO6: set filesystem label as HUB_NO6
- boards: remove stray '+' characters at start of lines in ld files
- boards: remove unused MICROPY_HW_ENABLE_TIMER config
- boards: enable MICROPY_HW_ENABLE_SERVO on various boards
- update L4 code to build with latest stm32lib and L4 HAL 1.17.0
- main: call sdcard_init when only MICROPY_HW_ENABLE_MMCARD enabled
- sdcard: support 8-bit wide SDIO bus
- sdcard: add config option to force MM card capacity
- factoryreset: init vfs flags before calling pyb_flash_init_vfs
- qspi: fix typo in address comment
- boards/make-pins.py: generate empty ADC table if needed
- boards/OLIMEX_H407: fix typo in OLIMEX H407 board.json
- network_wiznet5k: fix build error with wiznet5k and lwip enabled
- enable MICROPY_PY_USSL_FINALISER

teensy port:
- switch to use manifest.py instead of FROZEN_DIR

unix port:
- enable LOAD_ATTR fast path, and map lookup caching
- modusocket: support MP_STREAM_POLL in unix socket_ioctl
- modos: add support for uos.urandom(n)
- coverage: change remaining printf to mp_printf
- Makefile: use -Og instead of -O0 for debug builds

windows port:
- README: remove unsupported Python instructions for Cygwin
- mpconfigport.h: enable help and help("modules")
- add support for build variants to windows port
- run tests via Makefile
- appveyor: build both standard and dev variants
- appveyor: build mpy-cross only once for mingw-w64
- msvc: run qstr preprocessing phase in parallel

zephyr port:
- mphalport.h: remove unused and unimplemented C-level pin API
- increase minimum CMake version to 3.20.0
- update include path to reboot.h
- get UART console device from devicetree instead of Kconfig
- use CONFIG_USB_DEVICE_STACK for conditional USB device support
- upgrade to Zephyr v2.7.0
- modbluetooth_zephyr: provide dummy connect_cancel function
2022-02-15 12:36:26 -06:00
Jim Mussared e0bf4611c3 py: Only search frozen modules when '.frozen' is found in sys.path.
This changes makemanifest.py & mpy-tool.py to merge string and mpy names
into the same list (now mp_frozen_names).

The various paths for loading a frozen module (mp_find_frozen_module) and
checking existence of a frozen module (mp_frozen_stat) use a common
function that searches this list.

In addition, the frozen lookup will now only take place if the path starts
with ".frozen", which needs to be added to sys.path.

This fixes issues #1804, #2322, #3509, #6419.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-12-18 00:01:59 +11:00
Scott Shawcroft 09f7b43c64
Merge MicroPython 1.10 into CircuitPython 2021-04-21 15:59:17 -07:00
Scott Shawcroft b057fb8a4b
codeformat 2021-04-19 22:22:44 -07:00
microDev a52eb88031
run code formatting script 2021-03-15 19:27:36 +05:30
Diego Elio Pettenò 34b4993d63 Add license to some obvious files. 2020-07-06 19:16:25 +01:00
Damien George 3f39d18c2b all: Add *FORMAT-OFF* in various places.
This string is recognised by uncrustify, to disable formatting in the
region marked by these comments.  This is necessary in the qstrdef*.h files
to prevent modification of the strings within the Q(...).  In other places
it is used to prevent excessive reformatting that would make the code less
readable.
2020-02-28 10:31:07 +11:00
Paul Sokolovsky 93f29975db py/modbuiltins: Make oct/hex work when !MICROPY_PY_BUILTINS_STR_OP_MODULO
Instead of redirecting to str.__mod__(), use str.format() in this case.
2018-09-20 14:41:35 +10:00
Damien George 7b2a9b059a py/pystack: Use "pystack exhausted" as error msg for out of pystack mem.
Using the message "maximum recursion depth exceeded" for when the pystack
runs out of memory can be misleading because the pystack can run out for
reasons other than deep recursion (although in most cases pystack
exhaustion is probably indirectly related to deep recursion).  And it's
important to give the user more precise feedback as to the reason for the
error: if they know precisely that the pystack was exhausted then they have
a chance to increase the amount of memory available to the pystack (as
opposed to not knowing if it was the C stack or pystack that ran out).

Also, C stack exhaustion is more serious than pystack exhaustion because it
could have been that the C stack overflowed and overwrote/corrupted some
data and so the system must be restarted.  The pystack can never corrupt
data in this way so pystack exhaustion does not require a system restart.
Knowing the difference between these two cases is therefore important.

The actual exception type for pystack exhaustion remains as RuntimeError so
that programatically it behaves the same as a C stack exhaustion.
2018-02-19 00:26:14 +11:00
Damien George 58f00d7c0e py/modbuiltins: Use standard arg-parsing helper func for builtin print.
This allows the function to raise an exception when unknown keyword args
are passed in.  This patch also reduces code size by (in bytes):

   bare-arm:   -24
minimal x86:   -76
   unix x64:   -56
unix nanbox:   -84
      stm32:   -40
    esp8266:   -68
     cc3200:   -48

Furthermore, this patch adds space (" ") to the set of ROM qstrs which
means it doesn't need to be put in RAM if it's ever used.
2017-12-05 12:14:57 +11:00
Damien George 860eeeea9b py/qstrdefs: Remove unused qstrs.
They are not used by any component and take up valuable flash space.
2017-09-01 15:22:25 +10:00
Alexander Steffen 55f33240f3 all: Use the name MicroPython consistently in comments
There were several different spellings of MicroPython present in comments,
when there should be only one.
2017-07-31 18:35:40 +10:00
Damien George dcb9ea7215 extmod: Add generic VFS sub-system.
This provides mp_vfs_XXX functions (eg mount, open, listdir) which are
agnostic to the underlying filesystem type, and just require an object with
the relevant filesystem-like methods (eg .mount, .open, .listidr) which can
then be mounted.

These mp_vfs_XXX functions would typically be used by a port to implement
the "uos" module, and mp_vfs_open would be the builtin open function.

This feature is controlled by MICROPY_VFS, disabled by default.
2017-01-27 17:19:06 +11:00
Jan Čapek d76c65f599 py: Add rules for automated extraction of qstrs from sources.
- add template rule that converts a specified source file into a qstring file

- add special rule for generating a central header that contains all
  extracted/autogenerated strings - defined by QSTR_DEFS_COLLECTED
  variable. Each platform appends a list of sources that may contain
  qstrings into a new build variable: SRC_QSTR. Any autogenerated
  prerequisities are should be appened to SRC_QSTR_AUTO_DEPS variable.

- remove most qstrings from py/qstrdefs, keep only qstrings that
  contain special characters - these cannot be easily detected in the
  sources without additional annotations

- remove most manual qstrdefs, use qstrdef autogen for: py, cc3200,
  stmhal, teensy, unix, windows, pic16bit:

   - remove all micropython generic qstrdefs except for the special strings that contain special characters (e.g. /,+,<,> etc.)
   - remove all port specific qstrdefs except for special strings
   - append sources for qstr generation in platform makefiles (SRC_QSTR)
2016-04-16 13:18:09 +01:00
pohmelie 81ebba7e02 py: add async/await/async for/async with syntax
They are sugar for marking function as generator, "yield from"
and pep492 python "semantically equivalents" respectively.

@dpgeorge was the original author of this patch, but @pohmelie made
changes to implement `async for` and `async with`.
2016-04-13 15:26:38 +01:00
Damien George eec8a94f04 extmod/machine_i2c: Implement I2C memory reading/writing. 2016-04-12 15:52:17 +01:00
Damien George d083712224 extmod: Add generic machine.I2C class, with bit-bang I2C.
Should work on any machine that provides the correct pin functions.
2016-04-12 14:06:54 +01:00
Damien George 53ad681ed1 extmod: Add initial framebuf module. 2016-04-12 14:06:53 +01:00
Paul Sokolovsky 8f1854ad2d extmod/modlwip: Add SOL_SOCKET and SO_REUSEADDR constants for setsockopt(). 2016-03-25 15:06:12 +02:00
Paul Sokolovsky 5d93dfbc2c py/modio: Initial implementation of io.BufferedWriter class.
Just .write() method implemented currently.
2016-03-25 01:10:49 +02:00
Paul Sokolovsky 24342dd65e extmod/modwebsocket: Start module for WebSocket helper functions.
Currently, only write support is implemented (of limited buffer size).
2016-03-24 19:16:00 +02:00
Paul Sokolovsky f1919b7c98 extmod/modlwip: Add dummy .makefile() method. 2016-03-09 09:14:45 +07:00
Paul Sokolovsky ed593780bf extmod/modlwip: Implement dummy setsockopt(). 2016-03-08 14:24:49 +07:00
Damien George 4f72aa86bf py/qstrdefs: Add mkdir and remove qstrs for user-mountable filesystems. 2016-02-29 10:54:00 +00:00
Paul Sokolovsky e0821830b0 extmod/vfs_fat: Add .rename() method. 2016-02-29 01:23:53 +02:00
Paul Sokolovsky cd6d189f48 extmod/vfs_fat: Move listdir() method from stmhal for reuse. 2016-02-28 17:17:24 +02:00
Damien George 28adab36c7 py/emitinlinethumb: Use qstrs instead of char* for names of asm ops.
Reduces code size by 112 bytes on Thumb2 arch, and makes assembler faster
because comparison can be a simple equals instead of a string compare.

Not all ops have been converted, only those that were simple to convert
and reduced code size.
2016-02-23 15:20:39 +00:00
Paul Sokolovsky 6cee869feb py/qstrdefs.h: qstrs for VfsFat. 2016-02-15 12:49:32 +02:00
Damien George 0e0ce47e65 extmod/fsusermount: Expose umount as a public function. 2016-02-10 23:40:10 +00:00
Damien George c33ad60a67 extmod/fsusermount: Change block protocol to support ioctl method.
The new block protocol is:
- readblocks(self, n, buf)
- writeblocks(self, n, buf)
- ioctl(self, cmd, arg)

The new ioctl method handles the old sync and count methods, as well as
a new "get sector size" method.

The old protocol is still supported, and used if the device doesn't have
the ioctl method.
2016-02-10 08:59:31 +00:00
Damien George 8f54c08691 py/inlineasm: Add ability to specify return type of asm_thumb funcs.
Supported return types are: object, bool, int, uint.

For example:

@micropython.asm_thumb
def foo(r0, r1) -> uint:
    add(r0, r0, r1)
2016-01-27 14:27:10 +00:00
Damien George a53af6c875 extmod/modurandom: Add some extra random functions.
Functions added are:
- randint
- randrange
- choice
- random
- uniform

They are enabled with configuration variable
MICROPY_PY_URANDOM_EXTRA_FUNCS, which is disabled by default.  It is
enabled for unix coverage build and stmhal.
2016-01-26 15:27:00 +00:00
Paul Sokolovsky ee1656e148 extmod/moduhashlib: Add support for SHA1 (based on axTLS).
SHA1 is used in a number of protocols and algorithm originated 5 years ago
or so, in other words, it's in "wide use", and only newer protocols use
SHA2.

The implementation depends on axTLS enabled. TODO: Make separate config
option specifically for sha1().
2016-01-24 20:55:09 +02:00
Damien George df4ce930e3 py/modmicropython: Add stack_use, heap_lock and heap_unlock functions.
micropython.stack_use() returns an integer being the number of bytes used
on the stack.

micropython.heap_lock() and heap_unlock() can be used to prevent the
memory manager from allocating anything on the heap.  Calls to these are
allowed to be nested.
2016-01-24 09:12:06 +00:00
Dave Hylands a17755ee8b py: Add ustruct.pack_into and unpack_from 2016-01-19 12:25:28 +00:00
Paul Sokolovsky a58a91eb04 extmod/modurandom: Add "urandom" module.
Seedable and reproducible pseudo-random number generator. Implemented
functions are getrandbits(n) (n <= 32) and seed().

The algorithm used is Yasmarang by Ilya Levin:
http://www.literatecode.com/yasmarang
2016-01-17 12:13:01 +02:00
chrysn f8ba2eca80 builtin property: accept keyword arguments
this allows python code to use property(lambda:..., doc=...) idiom.

named versions for the fget, fset and fdel arguments are left out in the
interest of saving space; they are rarely used and easy to enable when
actually needed.

a test case is included.
2016-01-14 21:15:18 +02:00
stijn 3c014a67ea py: Implement __dict__ for instances.
Note that even though wrapped in MICROPY_CPYTHON_COMPAT, it is not
fully compatible because the modifications to the dictionary do not
propagate to the actual instance members.
2016-01-03 20:51:26 +02:00
Paul Sokolovsky 00ee84e1e1 py: Clean up instantiation of dupterm object.
To comply with already established scheme for extmod's.
2016-01-01 14:22:57 +02:00
Dave Hylands 0dce9a21ce stmhal: Add struct qstr to block of qstrs needed for MICROPY_PY_STRUCT.
Otherwise build fails if uctypes is disabled.
2015-12-28 00:28:56 +00:00
Paul Sokolovsky b4c65c253f extmod/fsusermount: Move module qstrs to global pool from stmhal port. 2015-12-25 19:22:16 +02:00
Paul Sokolovsky 2eb844e0b4 ports: Rename "machine" module to "umachine".
To let unix port implement "machine" functionality on Python level, and
keep consistent naming in other ports (baremetal ports will use magic
module "symlinking" to still load it on "import machine").

Fixes #1701.
2015-12-18 02:39:52 +02:00
pohmelie c6ee273410 py: Add min/max "default" keyword argument 2015-12-07 18:56:25 +02:00
pohmelie 354e688d8e py: Add MICROPY_PY_BUILTINS_MIN_MAX, disable for minimal ports. 2015-12-07 18:56:25 +02:00
Paul Sokolovsky 1a1d11fa32 py/modsys: Implement sys.modules.
This for example will allow people to reload modules which didn't load
successfully (e.g. due to syntax error).
2015-12-05 00:13:29 +02:00