7520feed1c
Move ParallelBus to its own module
2021-08-29 07:33:54 -05:00
6e7e703f89
Fix RP2 countio reset
...
Fixes #5251
2021-08-27 17:39:19 -07:00
3e9daeca8f
Merge pull request #5244 from dhalbert/stop-pio-on-deinit
...
Stop StateMachine explicitly on deinit
2021-08-27 08:59:04 -07:00
0261cacb06
Stop StateMachine explicitly on deinit
2021-08-27 10:07:14 -04:00
f1d25af7ba
Allow PIO to be user-interruptible
2021-08-27 08:38:51 -04:00
bef07961ab
raspberrypi: audiopwmout: subtle for #5092
...
I noticed that the loop over 65535 possible denominators took a long time,
causing up to 100ms wait for a sound sample to start playing!
This algorithm, adapted from an algorithm shown in Python's fractions.py,
is guaranteed to find the best denominator in a small number of steps
(I think log2-many steps but I'm not sure). In practice, it means the time
between samples playing is just 10ms, and some of that is recreating the
sine wave sample in Python each time.
It often finds the same solution as the old code, but sometimes it finds
one a bit better since it compares the ratios using float point instead
of integer arithmetic.
2021-08-24 16:33:20 -05:00
77b0c76a37
raspberrypi: audiopwmout: simple fix for #5092
2021-08-24 15:54:06 -05:00
0390f812be
Fix RP2040 I2C instance check
2021-08-18 08:55:52 -07:00
de796e2304
Move OneWire to `onewireio` from `busio`
...
This will allow finer grained inclusion in 8.0.0
Fixes #5135
2021-08-12 10:47:14 -07:00
35aac3d26b
display SPI now 10MHz; set PWM duty cycle to zero at stop to quiet output
2021-08-11 10:48:53 -04:00
24e61a7da8
Track more carefully which audio buffers to fill, based on interrupt channels
2021-08-10 22:00:09 -04:00
2451c788f4
valid channels in audio_dma_stop; cleaner supervisor_ticks mgmt in keypad
2021-08-09 09:47:13 -04:00
fd71d924d2
partial buffer mgmt fix
2021-08-09 09:47:13 -04:00
9e54606ba1
Set output low in SIO
2021-07-28 09:00:36 -07:00
4be904fd4a
Switch to gpio mux to disable/enable pwm signal
2021-07-27 12:38:18 -07:00
e87e1d8175
Block when setting duty_cycle until the new value is taken
2021-07-27 12:37:35 -07:00
412eb87080
Switch to pin, frequency and duty_cycle PulseOut
...
Passing in a PWMOut still works but is deprecated. It will be
removed in CircuitPython 8.0.0
This also switches STM32 timer indices and channel indices to
0-based in our pin data rather than `- 1` everywhere. The latter is
more bug prone.
Most of the way for #3264
Tested on Metro M0, Metro M4, Feather S2, Feather nRF52840, Feather
STM32F4 and Arduino RP2040.
2021-07-26 18:35:49 -07:00
04ce6a6e8c
Check jmp_pin specified when JMP PIN opcodes used
2021-07-23 13:35:20 +02:00
8221a12cf6
Added support for specifying the JMP pin (RP2 PIO)
2021-07-22 18:39:04 +02:00
8723a0335f
Merge pull request #5032 from DavePutz/multi_pulseout
...
Moved global variables to support multiple RP2040 PulseOuts
2021-07-21 10:26:17 -07:00
b2d6203c63
fix formatting
2021-07-21 10:05:09 -05:00
0559fcd1c0
Moved global variables to support multiple PulseOuts
2021-07-21 09:52:17 -05:00
db0adf1253
Merge pull request #5025 from DavePutz/issue_5016
...
Turn off PWM pin during PulseOut construct
2021-07-20 17:25:10 -07:00
8fe4fa0114
Turn off PWN pin during PulseOut construct
2021-07-20 17:17:41 -05:00
128bedae7e
Merge pull request #5019 from DavePutz/issue_5016
...
Ensure RP2040 pin is left low after PulseOut
2021-07-19 17:57:42 -04:00
d2f2afe57b
Merge pull request #4925 from microDev1/update-run-mode
...
Add RunMode.UF2 and update esp32s2 run-modes
2021-07-19 16:37:46 -04:00
8d79d4e5ee
Ensure pin is left low after PulseOut
2021-07-19 11:46:09 -05:00
3c25d8e2a0
Merge pull request #5013 from DavePutz/issue_5012
...
Issue #5012 - RP2040 moved globals to PulseIn object to fix multiple instances
2021-07-19 00:21:55 +05:30
43275e0b0d
Made suggested changes (mostly)
2021-07-18 12:00:37 -05:00
9ac607dffa
update run-mode
...
- add microcontroller.RunMode.UF2
- add UF2, NORMAL and BOOTLOADER run-modes to esp32s2
2021-07-18 00:00:58 +05:30
1c80696746
iFix formatting
2021-07-16 17:18:06 -05:00
588a19a1ab
Issue #5012 - Moved globals to PulseIn object to fix multiple instances
2021-07-16 15:59:08 -05:00
bba611336c
Merge pull request #4964 from DavePutz/issue_4937
...
Fix for issue #4937 - Implement minimum PulseOut time
2021-07-16 11:29:32 -07:00
eebddbb16d
Change min pulse calculation
2021-07-15 21:27:23 -05:00
c2685970af
Merge pull request #4987 from DavePutz/issue_4983
...
Fix for Issue #4983 - stop state machine before restarting
2021-07-13 12:16:33 -07:00
5c9823d8cb
Change order of operations in restart
2021-07-13 11:17:03 -05:00
490f263a41
Added code to reset SM program counter during a restart
2021-07-12 14:09:11 -05:00
9d5fbea7a3
Fix for Issue #4983 - stop state machine before restarting
2021-07-11 21:02:28 -05:00
0ea750b2d0
Fix handling of short pulses
2021-07-11 16:38:24 -05:00
58fdf9e940
Merge pull request #4975 from DavePutz/issue_4945
...
Issue #4945 - handle multiple PulseIns
2021-07-09 11:03:16 -07:00
4046b0fb0a
Issue #4945 - handle multiple PulseIns
2021-07-08 14:09:21 -05:00
ab52a92704
Disallow ctrl-C interrupts of RP2040 SPI and PIO
2021-07-08 13:42:24 -04:00
bd6826496c
Fix various RP2040 audio dma things: (see detailed commit message)
...
1. Check for correct error values from dma_claim_unused_channel.
2. Introduce a .stereo flag for simplicity.
3. Clarify PWM carrier frequency choice.
4. Start introducing quiescent audio value. Still need to ramp up/down.
5. Redo audio stop logic a bit.
6. Fix (unrelated) displayio dependency things.
There is still an interference problem between other DMA users and audio. Still debugging this.
2021-07-08 08:14:49 -04:00
f98ec0cfd6
Fix formatting
2021-07-06 14:43:46 -05:00
bfa777c55a
Add check for timer success
2021-07-06 14:34:15 -05:00
b2e72b2912
fix formatting
2021-07-05 23:13:18 -05:00
6e4613f1a1
Fix formatting
2021-07-05 12:30:26 -05:00
9814386d2e
Fix for issue #4937 - Implement minimum pulseout time
2021-07-05 11:38:05 -05:00
33bbb8b1f4
RP2040 PWMAudioOut: Release DMA channels after play has finished.
2021-07-01 17:36:29 -04:00
061d3a16ff
Merge pull request #4911 from DavePutz/issue_4908
...
Fix for issue #4908 - pulseout leaving line high
2021-06-24 15:32:48 -07:00
Jeff Epler
Scott Shawcroft
Scott Shawcroft
Dan Halbert
Nathan Young
root
Dan Halbert
microDev