Commit Graph

64 Commits

Author SHA1 Message Date
Scott Gauche 3b418dbddc change half_duplex to be on spi construct 2022-02-08 21:37:38 -05:00
EmergReanimator cfa7e8a168 fix #5948 Adding back the SPI configuration to spi_flash_read/write_data
Removing this configures will break cases where the flash is on a shared SPI bus with a device that has different settings.
This is rare but possible.
2022-02-01 19:39:56 +01:00
EmergReanimator 2a1f586634 Avoid excessive SPI re-configuration in run-time of SPI flash. 2022-01-30 09:49:07 +01:00
EmergReanimator f610b6b190 Changed the order of SPI configuration and activation.
SPI should be configured while chip select pin is disabled.
Tested with external flash on STM32 F4VE board.
2022-01-29 18:29:50 +01:00
Jeff Epler 63fbf98186
Enable -Wmissing-prototypes for atmel-samd 2021-11-09 20:05:00 -06:00
Max Holliday c999e2a329 add missing varriables to devices.h generator 2021-10-24 11:45:15 -07:00
Scott Shawcroft 1a0b4193b7
Simplify the status LED to save power
This also removes the need to pin share because we don't use the
status LED while user code is running.

The status flashes fallback to the HW_STATUS LED if no RGB LED is
present. Each status has a unique blink pattern as well.

One caveat is the REPL state. In order to not pin share, we set the
RGB color once. PWM and single color will be shutoff immediately but
DotStars and NeoPixels will hold the color until the user overrides
it.

Fixes #4133
2021-05-13 14:41:20 -07:00
Jeff Epler e95e921ca1 codeformat: Fix filename matching
In #4683, tannewt noticed that uncrustify was not running on some
file in common-hal.

I investigated and found that it was not being run on a bunch of paths.

Rather than make incremental changes, I rewrote list_files to work
bsaed on regular expressions; these regular expressions are created from
the same git-style glob patterns.

I spot-checked some specific filenames after this change, and all looks good:

```
$ python3 tools/codeformat.py -v --dry-run tests/basics/int_small.py ports/raspberrypi/common-hal/pulseio/PulseIn.c extmod/virtpin.c tests/thread/thread_exit1.py  ports/raspberrypi/background.h extmod/re1.5/recursiveloop.c
tools/codeformat.py -v --dry-run tests/basics/int_small.py ports/raspberrypi/common-hal/pulseio/PulseIn.c extmod/virtpin.c tests/thread/thread_exit1.py ports/raspberrypi/background.h extmod/re1.5/recursiveloop.c
uncrustify -c /home/jepler/src/circuitpython/tools/uncrustify.cfg -lC --no-backup extmod/virtpin.c ports/raspberrypi/background.h ports/raspberrypi/common-hal/pulseio/PulseIn.c
black --fast --line-length=99 -v tests/thread/thread_exit1.py
```
recursiveloop and int_small are excluded, while PulseIn, virtpin,
and background are included.

Testing running from a subdirectory (not _specifically_ supported though):
```
(cd ports && python3 ../tools/codeformat.py -v --dry-run raspberrypi/common-hal/pulseio/PulseIn.c ../extmod/virtpin.c)
../tools/codeformat.py -v --dry-run raspberrypi/common-hal/pulseio/PulseIn.c ../extmod/virtpin.c
uncrustify -c /home/jepler/src/circuitpython/tools/uncrustify.cfg -lC --no-backup ../extmod/virtpin.c raspberrypi/common-hal/pulseio/PulseIn.
```

As a side-effect, a bunch more files are re-formatted now. :-P
2021-04-30 10:48:08 -05:00
Scott Shawcroft 01c153cd7e
Fix devices include by splitting type from defines 2021-03-25 11:37:08 -07:00
Scott Shawcroft aec0ef3cbf
Switch devices.h to nvm.toml data 2021-03-25 09:57:18 -07:00
Artyom Skrobov 3b613ff97c [spi_flash] handle reentrance gracefully
Report failure instead of deadlocking the device
2021-03-23 02:11:54 -04:00
Linar Yusupov 76c1ae7194 fix for MX25R1635F QSPI mode of operation 2021-03-22 09:12:26 +03:00
microDev a52eb88031
run code formatting script 2021-03-15 19:27:36 +05:30
Jeff Epler 32475ce98c Automatically count EXTERNAL_FLASH_DEVICES (mk2)
Instead of counting words in make, which is slightly awful, notice that
possible_devices is local to external_flash.c, so we can declare the array
with an automatic bound, and then get the count as the element-count
(MP_ARRAY_SIZE) of the array.

Since EXTERNAL_FLASH_DEVICE_COUNT is no longer a global macro, switch
a few sites to using EXTERNAL_FLASH_DEVICES in `#if` checks instead.
2021-03-07 12:51:47 -06:00
Dan Halbert f226f4a233
Merge pull request #3864 from djix123/w25q64fv
Add support for Winbond W25Q64FV
2020-12-22 09:29:22 -05:00
Jonathan Giles 17e7973ff2 Add support for Winbond W25Q64FV 2020-12-22 07:50:56 -05:00
Dan Halbert 233ccaac58
Merge pull request #3824 from skerr92/add_more_spi_flash
Adding Support for AT25DF641A SPI Flash
2020-12-21 14:48:36 -05:00
Hany Elkomy 70a9c601a8
Update devices.h
Correct capacity value for the MX25R1635F from 0x18 to 0x15 (tested and working)
refer to 
https://github.com/adafruit/circuitpython/issues/3558
2020-12-17 12:52:51 +08:00
Seth Kerr ca757f2ead removed comments on 64MiB SPI flash causing build test issues 2020-12-16 10:25:20 -05:00
Seth Kerr 6d8642bf41 fixing line comment issue with CI build tests 2020-12-14 17:17:28 -05:00
Seth Kerr 731cdefe80 this should be it. 2020-12-14 16:25:33 -05:00
Christian Walther c7404a3ff8 Add movable allocation system.
This allows calls to `allocate_memory()` while the VM is running, it will then allocate from the GC heap (unless there is a suitable hole among the supervisor allocations), and when the VM exits and the GC heap is freed, the allocation will be moved to the bottom of the former GC heap and transformed into a proper supervisor allocation. Existing movable allocations will also be moved to defragment the supervisor heap and ensure that the next VM run gets as much memory as possible for the GC heap.

By itself this breaks terminalio because it violates the assumption that supervisor_display_move_memory() still has access to an undisturbed heap to copy the tilegrid from. It will work in many cases, but if you're unlucky you will get garbled terminal contents after exiting from the vm run that created the display. This will be fixed in the following commit, which is separate to simplify review.
2020-11-28 17:50:23 +01:00
Diego Elio Pettenò 34b4993d63 Add license to some obvious files. 2020-07-06 19:16:25 +01:00
Jeff Epler d5074220a8 atmel-samd: Add SAM E54 Xplained board
Few peripherals are actually tested.  However, USB, I2C and GPIO seem to work.

Most pins are silkscreened with the "PX00" style, so the board module
only includes the small number that are screened differently.

The default SPI, I2C, and UART are the ones on the EXT2 header.  This is
arbitrary, but the I2C on this connector is shared with the on-board I2C
devices and the PCC header, making it the most versatile.
2020-06-23 10:41:48 -05:00
Brian Dean cf888dc02b .../devices.h: Add GigaDevices GD25S512MD 64 MiB flash chip support. 2020-05-29 15:40:56 -04:00
Max Holliday 964040b770 More erroneous else statements 2020-05-09 12:16:04 -07:00
Max Holliday 8b6587a0c6 Unified single_status_byte & no_reset_cmd behavior 2020-05-09 12:09:01 -07:00
Max Holliday 9e01bb2136 Removing erroneous else statements 2020-05-09 12:03:26 -07:00
Max Holliday 9ef28d8536 Replacing device that was accidentally deleted 2020-05-09 12:00:59 -07:00
Dan Halbert c377d4bea7
Merge branch 'master' into non-standard-nvm 2020-05-04 16:08:45 -04:00
Max Holliday cc290c50c6 fixing diff error 2020-04-28 18:15:38 -07:00
Max Holliday 6c4decd4e2 decoupling chip specific functions from EXTERNAL_FLASH_QSPI_SINGLE 2020-04-28 11:51:07 -07:00
Scott Shawcroft 755d404edf
Merge remote-tracking branch 'adafruit/master' into lower_power 2020-04-27 16:45:10 -07:00
Max Holliday 86943ca8a1 Merge remote-tracking branch 'adafruit/master' 2020-04-27 13:51:51 -07:00
Sean Cross 05b5356acc external_flash: add support for mx25r1635f
This flash chip is used in Simmel.

Signed-off-by: Sean Cross <sean@xobs.io>
2020-04-21 09:56:05 +08:00
Max Holliday 826837186c adds standard (non-queued) SPI support to QSPI for external flash 2020-04-07 18:17:25 -07:00
Scott Shawcroft 8fe512c7e9
Merge remote-tracking branch 'adafruit/master' into lower_power 2020-03-31 15:13:58 -07:00
Brian Dean b1d83c3f5e supervisor/shared/external_flash/devices.h: Add MX25L51245G support.
Add external flash support for Macronix MX25L51245G 64MiB SPI flash.
2020-03-25 17:16:09 -04:00
Scott Shawcroft ed5cdd7e09
Hopefully fix flash flush and hopefully audio as well. 2020-03-13 11:12:31 -07:00
jepler f20255813f samd51 thing plus: new port
testing performed:
 * successfully store and retrieve a 500kB file on the flash
 * square wave output on each pin appears on o'scope
 * board.SPI(), board.SERIAL(), board.I2C() all construct
2020-02-25 11:52:23 -06:00
Langston Nashold 76d8e5b399 Add support for external flash device Winbond.com W25Q80DV
Currently, we only support external flash device W25Q80DL. This
adds support for the W25Q80DL.

tweak
2020-02-06 16:46:43 -08:00
Lucian Copeland 3c86005546 Implement requested changes 2020-01-28 17:11:25 -05:00
Jeff Epler f4a5c17b5e supervisor: external_flash: don't call m_free when it's bad
It's extremely dubious that we have these handles that we think
are to GC'd memory at a time when the gc pool may not be initialized.
Hopefully, they WERE valid GC memory and are undisturbed by the teardown
of the interpreter that can lead to this state.

In this case, don't try to m_free them, the memory will become free when
the GC heap is reinitialized.

Closes: #2338 (together with previous commit)
2019-12-10 17:07:20 -06:00
Jeff Epler b22fbcd77d supervisor: external_flash: don't call m_malloc_maybe when it's bad 2019-12-10 17:06:09 -06:00
Thea Flowers 73989dbcaf Add board configuration for Winterbloom Sol 2019-11-04 23:11:42 -08:00
Scott Shawcroft 1a7c787d3c
Merge branch 'master' into master 2019-10-14 19:47:46 -07:00
arturo182 e0f60d0c17 Add IS25LP128F flash device definition 2019-10-14 23:42:53 +02:00
Cedar Grove Maker Studios f1ab9aaa9c
add def for AT25SF161-SSHD-T 2MiB SPI flash chip 2019-10-14 11:58:14 -07:00
Hierophect eacdb1da6e Disable timeout, remove redundancy 2019-10-03 14:43:25 -04:00
Hierophect 8a4bbae077 Fix typo causing parsing error 2019-10-02 18:18:52 -04:00