ESP-NOW is a proprietary wireless communication protocol which supports
connectionless communication between ESP32 and ESP8266 devices, using
vendor specific WiFi frames. This commit adds support for this protocol
through a new `espnow` module.
This commit builds on original work done by @nickzoic, @shawwwn and with
contributions from @zoland. Features include:
- Use of (extended) ring buffers in py/ringbuf.[ch] for robust IO.
- Signal strength (RSSI) monitoring.
- Core support in `_espnow` C module, extended by `espnow.py` module.
- Asyncio support via `aioespnow.py` module (separate to this commit).
- Docs provided at `docs/library/espnow.rst`.
Methods available in espnow.ESPNow class are:
- active(True/False)
- config(): set rx buffer size, read timeout and tx rate
- recv()/irecv()/recvinto() to read incoming messages from peers
- send() to send messages to peer devices
- any() to test if a message is ready to read
- irq() to set callback for received messages
- stats() returns transfer stats:
(tx_pkts, tx_pkt_responses, tx_failures, rx_pkts, lost_rx_pkts)
- add_peer(mac, ...) registers a peer before sending messages
- get_peer(mac) returns peer info: (mac, lmk, channel, ifidx, encrypt)
- mod_peer(mac, ...) changes peer info parameters
- get_peers() returns all peer info tuples
- peers_table supports RSSI signal monitoring for received messages:
{peer1: [rssi, time_ms], peer2: [rssi, time_ms], ...}
ESP8266 is a pared down version of the ESP32 ESPNow support due to code
size restrictions and differences in the low-level API. See docs for
details.
Also included is a test suite in tests/multi_espnow. This tests basic
espnow data transfer, multiple transfers, various message sizes, encrypted
messages (pmk and lmk), and asyncio support.
Initial work is from https://github.com/micropython/micropython/pull/4115.
Initial import of code is from:
https://github.com/nickzoic/micropython/tree/espnow-4115.
Changes in this commit:
- Change MICROPY_HW_BOARD_NAME definition to match the product name.
- Rename board folder's name to match the product name style.
- Change related files like Makefile, document descriptions, test cases, CI
and tools.
Signed-off-by: Takeo Takahashi <takeo.takahashi.xv@renesas.com>
btstack only supports central-initiated, so this allows us to have a test
that works on both (ble_mtu.py), and then another one for just the NimBLE
supported behavior (ble_mtu_peripheral.py).
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
On unix, time.sleep is implemented as select(timeout=<time>) which means
that it does not run the poll hook during sleeping.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
Following other vfs_fat tests, so the test works on ports like stm32 that
only support 512-byte block size.
Signed-off-by: Damien George <damien@micropython.org>
If a multitest calls `multitest.output_metric(...)` then that output will
be collected separately, not considered as part of the test verification
output, and instead be printed at the end. This is useful for tests that
want to output performance/timing metrics that may change from one run to
the next.
Signed-off-by: Damien George <damien@micropython.org>
When iterating over os.ilistdir(), the special directories '.' and '..'
are filtered from the results. But the code inadvertently also filtered
any file/directory which happened to match '..*'. This change fixes the
filter.
Fixes issue #11032.
Signed-off-by: Jeremy Rand <jeremy@rand-family.com>
When := is used in a comprehension the target variable is bound to the
parent scope, so it's either a global or a nonlocal. Prior to this commit
that was handled by simply using the parent scope's id_info for the
target variable. That's completely wrong because it uses the slot number
for the parent's Python stack to store the variable, rather than the slot
number for the comprehension. This will in most cases lead to incorrect
behaviour or memory faults.
This commit fixes the scoping of the target variable by explicitly
declaring it a global or nonlocal, depending on whether the parent is the
global scope or not. Then the id_info of the comprehension can be used to
access the target variable. This fixes a lot of cases of using := in a
comprehension.
Code size change for this commit:
bare-arm: +0 +0.000%
minimal x86: +0 +0.000%
unix x64: +152 +0.019% standard
stm32: +96 +0.024% PYBV10
cc3200: +96 +0.052%
esp8266: +196 +0.028% GENERIC
esp32: +156 +0.010% GENERIC[incl +8(data)]
mimxrt: +96 +0.027% TEENSY40
renesas-ra: +88 +0.014% RA6M2_EK
nrf: +88 +0.048% pca10040
rp2: +104 +0.020% PICO
samd: +88 +0.033% ADAFRUIT_ITSYBITSY_M4_EXPRESS
Fixes issue #10895.
Signed-off-by: Damien George <damien@micropython.org>
The device-under-test should use `multitest.expect_reboot()` to indicate
that it will reboot.
Signed-off-by: Andrew Leech <andrew.leech@planetinnovation.com.au>
Prior to this fix, pow(1.5, inf) and pow(0.5, -inf) (among other things)
would incorrectly raise a ValueError, because the result is inf with the
first argument being finite. This commit fixes this by allowing the result
to be infinite if the first or second (or both) argument is infinite.
This fix doesn't affect the other three math functions that have two
arguments:
- atan2 never returns inf, so always fails isinf(ans)
- copysign returns inf only if the first argument x is inf, so will never
reach the isinf(y) check
- fmod never returns inf, so always fails isinf(ans)
Signed-off-by: Damien George <damien@micropython.org>
So it can run on targets with low memory, eg esp8266.
Also enable the viper_4args() sub-test, which is now supported.
Signed-off-by: Damien George <damien@micropython.org>
This is important for literal tuples, e.g.
f"{a,b,}, {c}" --> "{}".format((a,b), (c),)
which would otherwise result in either a syntax error or the wrong result.
Fixes issue #9635.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
32-bit platforms only support a slice offset start of 24 bit max due to the
limited size of the mp_obj_array_t.free member. Similarly on 64-bit
platforms the limit is 56 bits.
This commit adds an OverflowError if the user attempts to slice a
memoryview beyond this limit.
Signed-off-by: Damien George <damien@micropython.org>
In @micropython.native code the types of variables and expressions are
always Python objects, so they can be initialised as such. This prevents
problems with compiling optimised code like while-loops where a local may
be referenced before it is assigned to.
Signed-off-by: Damien George <damien@micropython.org>
During the initial handshake or subsequent renegotiation, the protocol
might need to read in order to write (or conversely to write in order
to read). It might be blocked from doing so by the state of the
underlying socket (i.e. there is no data to read, or there is no space
to write).
The library indicates this condition by returning one of the errors
`MBEDTLS_ERR_SSL_WANT_READ` or `MBEDTLS_ERR_SSL_WANT_WRITE`. When that
happens, we need to enforce that the next poll operation only considers
the direction that the library indicated.
In addition, mbedtls does its own read buffering that we need to take
into account while polling, and we need to save the last error between
read()/write() and ioctl().
The assertion that is added here (to gc.c) fails when running this new test
if ALLOC_TABLE_GAP_BYTE is set to 0.
Signed-off-by: Jeff Epler <jepler@gmail.com>
Signed-off-by: Damien George <damien@micropython.org>
The code was already checking for duplicate kwargs for named parameters but
if `**kwargs` was given as a parameter, it did not check for multiples of
the same argument name.
This fixes the issue by adding an addition test to catch duplicates and
adds a test to exercise the code.
Fixes issue #10083.
Signed-off-by: David Lechner <david@pybricks.com>
This test could occasionally fail because some operations take longer
than expected. This relaxes the timing constraints and defers printing
until the very end.
Signed-off-by: Laurens Valk <laurens@pybricks.com>
Now that the Timer class has been merged in a separate pull request,
this can be added to the module test too.
Signed-off-by: Laurens Valk <laurens@pybricks.com>
Implements dictionary union according to PEP 584's specifications, minus
the fact that dictionary entries are not guaranteed to be in insertion
order. This feature is enabled with MICROPY_CPYTHON_COMPAT.
Includes a new test.
With the assistance of Fangrui Qin <qinf@purdue.edu>
Signed-off-by: Rayane Chatrieux <rayane.chatrieux@gmail.com>
Signed-off-by: Damien George <damien@micropython.org>
This shows how ports can add their own custom types/classes.
It is part of the unix coverage build, so we can use it for tests too.
Signed-off-by: Laurens Valk <laurens@pybricks.com>
This will make mpy-cross auto-detect. Allow overriding for non-default
configurations (e.g. using 32-bit build of the unix port).
Also use armv7m by default for qemu-arm (the default qemu target is
Cortex-M3).
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
This prevents a very subtle bug caused by writing e.g. `bytearray('\xfd')`
which gives you `(0xc3, 0xbd)`.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
Gives the absolute path to the unix micropython binary.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
Signed-off-by: Damien George <damien@micropython.org>
