Commit Graph

130 Commits

Author SHA1 Message Date
Damien George 136369d72f all: Update to point to files in new shared/ directory.
Signed-off-by: Damien George <damien@micropython.org>
2021-07-12 17:08:10 +10:00
Mike Causer bc7822d8e9 drivers/display/ssd1306.py: Add support for 72x40 displays.
The 72x40 OLED requires selecting the internal IREF, as opposed to the
default external IREF.  This is an undocumented feature in the SSD1306
datasheet, but is present in the SSD1315 datasheet.  It's possible the
72x40 OLED is actually using the newer SSD1315 controller.  Sending the
IREF select command to SSD1306 displays has no effect on them, so it's
added to the init_display() instead of wrapping in an "if width = 72".

Also tested on a 128x64 OLED using the SSD1315 controller (smaller ribbon
cable) and the proposed change has no effect on the display, as the module
comes with the correct current limiting resistor.  Internal and external
IREF work the same.

Fixes issue #7281.
2021-06-17 18:54:32 +10:00
Mike Causer 9eea51b730 drivers/display/ssd1306.py: Add rotate method.
And clean up (make more efficient) display set-up commands.
2021-05-06 15:57:19 +10:00
iabdalkader 0d4eb15392 drivers/cyw43/cywbt: Remove hard-coded UART6 alternate function setting. 2021-04-30 10:16:27 +10:00
iabdalkader d74e2aca3e drivers/cyw43/cywbt: Add compile option for RF switch. 2021-04-30 10:15:59 +10:00
iabdalkader d3eb6d68a3 drivers/cyw43/cyw43_ctrl: Use new sdio enable API functions.
This removes any references to a specific SDMMC instance, making the driver
more generic/portable.
2021-04-30 01:12:18 +10:00
Damien George a1bc32d8a8 drivers/sdcard: Add sleep_ms(1) delay in SDCard.readinto sync loop.
So this driver works on faster MCUs (that run this loop fast) with older,
slower SD cards.

Fixes issue #7129.

Signed-off-by: Damien George <damien@micropython.org>
2021-04-23 23:44:37 +10:00
Damien George e43a74a4db drivers/memory/spiflash: Add MICROPY_HW_SPIFLASH_ENABLE_CACHE option.
This only needs to be enabled if a board uses FAT FS on external SPI flash.
When disabled (and using external SPI flash) 4k of RAM can be saved.

Signed-off-by: Damien George <damien@micropython.org>
2020-12-18 13:39:32 +11:00
Jim Mussared ed14435a8e extmod/modbluetooth: Refactor stack/hci/driver/port bindings.
Previously the interaction between the different layers of the Bluetooth
stack was different on each port and each stack.  This commit defines
common interfaces between them and implements them for cyw43, btstack,
nimble, stm32, unix.
2020-09-08 11:41:31 +10:00
stijn 40ad8f1666 all: Rename "sys" module to "usys".
This is consistent with the other 'micro' modules and allows implementing
additional features in Python via e.g. micropython-lib's sys.

Note this is a breaking change (not backwards compatible) for ports which
do not enable weak links, as "import sys" must now be replaced with
"import usys".
2020-09-04 00:10:24 +10:00
robert-hh 8680a74595 drivers/display/ssd1306.py: Change the SET_COM_PIN_CFG setting.
Making it more specific to use 0x02 for display with an aspect ratio > 2
(resolutions 96x16 and 128x32) and 0x12 for all other sizes as recommended
by @mcauser.  Tested with a 64x32 display which did not work before.
2020-04-07 13:42:37 +10:00
Jim Mussared def76fe4d9 all: Use MP_ERROR_TEXT for all error messages. 2020-04-05 15:02:06 +10:00
Andreas Motl fbfea3b440 drivers/onewire: Fix undefined variable errors.
On CPython, and with pylint, the variables MATCH_ROM and SEARCH_ROM are
undefined.  This code works in MicroPython because these variables are
constants and the MicroPython parser/compiler optimises them out.  But it
is not valid Python because they are technically undefined within the scope
they are used.

This commit makes the code valid Python code.  The const part is removed
completely because these constants are part of the public API and so cannot
be moved to the global scope (where they could still use the MicroPython
const optimisation).
2020-03-25 01:09:14 +11:00
Damien George 894c550c86 stm32: Refactor bluetooth stack/hci/driver bindings.
This makes a cleaner separation between the: driver, HCI UART and BT stack.
Also updated the naming to be more consistent (mp_bluetooth_hci_*).

Work done in collaboration with Jim Mussared aka @jimmo.
2020-03-10 01:53:42 +11:00
Damien George 69661f3343 all: Reformat C and Python source code with tools/codeformat.py.
This is run with uncrustify 0.70.1, and black 19.10b0.
2020-02-28 10:33:03 +11:00
Peter Hinch d2f22ea953 drivers/nrf24l01: Change pipe addrs in test to match Arduino addrs.
These addresses were initially chosen to match the nRF24 Arduino library
examples but they are byte-reversed.  So change them to be on-air
compatible with the Arduino library.

Also, the data sheet for the nRF24 says that RX data pipes 1-5 must share
the same top 32-bits, and must differ only in the LSbyte.  The addresses
used here (while correct because they are on TX pipe and RX pipe 0) are
misleading in this sense, because it looks like they were chosen to share
the top 32-bits per the datasheet.
2020-02-16 23:26:34 +11:00
Damien George d494e47855 drivers/cyw43: Return early from cyw43_wifi_set_up if wifi_on fails. 2020-01-31 20:46:35 +11:00
Damien George 5de55e8fb4 drivers/cyw43: Include stdio.h in files that use printf. 2020-01-31 20:46:10 +11:00
Andrew Leech 30501d3f54 drivers, stm32: Support SPI/QSPI flash chips over 16MB.
With a SPI flash that has more than 16MB, 32-bit addressing is required
rather than the standard 24-bit.  This commit adds support for 32-bit
addressing so that the SPI flash commands (read/write/erase) are selected
automatically depending on the size of the address being used at each
operation.
2020-01-30 13:18:38 +11:00
Damien George e83fc3260e drivers/cyw43: Fix to build in nanbox mode. 2019-12-27 22:54:53 +11:00
Damien George cd9de63c0e drivers/wiznet5k: Allow selecting maximum fixed buffer size for MACRAW.
Enabling WIZCHIP_USE_MAX_BUFFER will make the TX/RX buffers the maximum
available size, for use with MACRAW mode.
2019-12-13 12:34:42 +11:00
Jeremy Herbert 4f0f3dfb41 drivers/sdcard: Raise exception on timeout of readinto.
Otherwise the code can get stuck in an infinite loop if the SD card fails
to respond to a read.
2019-11-06 11:34:02 +11:00
Damien George 5954387858 drivers/onewire/ds18x20.py: Add support for DS1822 sensor.
DS1822P sensors behave just like the DS18B20 except for the following:
- it has a different family code: 0x22
- it has only the GND and DQ pins connected, it uses parasitic power from
  the data line

Contributed by @nebelgrau77.
2019-10-16 14:28:13 +11:00
Damien George 7418dbf12d drivers/cyw43: Add low-level CYW43xx Bluetooth HCI UART driver. 2019-10-01 09:50:48 +10:00
Damien George 8cde5faedd drivers/memory/spiflash: Add support to put SPI flash in sleep mode. 2019-07-03 01:27:33 +10:00
Damien George 7b70ab7258 drivers: Add driver for CYW43xx WiFi SoCs. 2019-06-03 16:47:35 +10:00
Damien George 02afc0d241 drivers/display/ssd1306.py: Change to use new i2c.writevto() method.
Fixes issue #3482.
2019-05-20 15:06:39 +10:00
Andrew Leech 2ed2ec1711 drivers/memory/spiflash: Rework wait_sr to fix uninit'd variable 'sr'. 2019-03-08 23:11:13 +11:00
Damien George f102ac54e9 drivers/dht: Allow open-drain-high call to be DHT specific if needed.
Some ports (eg esp8266) need to have specific behaviour for driving a DHT
reliably.
2019-01-22 00:23:05 +11:00
Peter Hinch 40a7e8c472 drivers/sdcard: Remove debugging print statement in ioctl method. 2018-09-20 16:54:58 +10:00
Peter Hinch 1628cd0e59 drivers/sdcard: In test use os.umount and machine module instead of pyb.
pyb.umount(None, mountpoint) no longer works.
2018-09-20 16:09:28 +10:00
Damien George dc77fdb7d4 drivers/display/lcd160cr.py: In fast_spi, send command before flushing.
The intention of oflush() is to flush the "fast SPI" command itself so that
the SPI object is ready to use when the function returns.
2018-09-18 13:49:49 +10:00
roland c1c798fbc3 drivers/cc3000: Use cc3000_time_t instead of time_t for custom typedef.
Otherwise it can clash with time_t from the C standard include headers.
2018-08-08 16:37:26 +10:00
Mateusz Kijowski 1751f5ac7b drivers/sdcard: Do not release CS during the middle of read operations.
It seems that some cards do not tolerate releasing the card (by setting CS
high) after issuing CMD17 (and 18) and raising it again before reading
data. Somehow this causes the 0xfe data start marker not being read and
SDCard.readinto() is spinning forever (or until this byte is in the data).

This seems to fix weird behviour of SDCard.readblocks() returning different
data, also solved hanging os.mount() for my case with a 16GB Infineon card.

This stackexchange answer gives more context:
https://electronics.stackexchange.com/questions/307214/sd-card-spi-interface-issue-read-operation-returns-0x3f-0xff-instead-of-0x7f-0#307268
2018-07-05 19:39:06 +10:00
Damien George 1747d15c3a drivers/sdcard: Fix bug in computing number of sectors on SD Card.
This was a typo from the very first commit of this file.
2018-06-15 18:02:40 +10:00
Damien George 8b8c083625 drivers/sdcard: Change driver to use new block-device protocol. 2018-06-15 18:01:36 +10:00
Damien George b78ca32476 drivers/memory/spiflash: Add functions for direct erase/read/write.
These new API functions do not use the cache.
2018-06-14 16:52:56 +10:00
Damien George cc5a94044a drivers/memory/spiflash: Rename functions to indicate they use cache.
This patch renames the existing SPI flash API functions to reflect the fact
that the go through the cache:

    mp_spiflash_flush -> mp_spiflash_cache_flush
    mp_spiflash_read  -> mp_spiflash_cached_read
    mp_spiflash_write -> mp_spiflash_cached_write
2018-06-14 16:52:56 +10:00
Damien George 86fe73beb9 drivers/memory/spiflash: Move cache buffer to user-provided config.
This patch removes the global cache variables from the SPI flash driver and
now requires the user to provide the cache memory themselves, via the SPI
flash configuration struct.  This allows to either have a shared cache for
multiple SPI flash devices (by sharing a mp_spiflash_cache_t struct), or
have a single cache per device (or a mix of these options).

To configure the cache use:

    mp_spiflash_cache_t spi_bdev_cache;

    const mp_spiflash_config_t spiflash_config =
        // any bus options
        .cache = &spi_bdev_cache,
    };
2018-06-14 16:52:56 +10:00
Damien George 5a5bc4a61f drivers/wiznet5k: Fix bug with MACRAW socket calculating packet size. 2018-06-01 13:44:09 +10:00
Damien George bdc875e602 drivers/memory/spiflash: Fix bugs in and clean up read/write functions.
mp_spiflash_read had a bug in it where "dest" and "addr" were incremented
twice for a certain special case.  This was fixed, which then allowed the
function to be simplified to reduce code size.

mp_spiflash_write had a bug in it where "src" was not incremented correctly
for the case where the data to be written included the caching buffer as
well as some bytes after this buffer.  This was fixed and the resulting
code simplified.
2018-03-13 14:13:30 +11:00
Damien George cc34b087f0 drivers/memory/spiflash: Fix setting of QE bit in flash register. 2018-03-11 11:25:38 +11:00
Damien George a739b35a96 drivers/memory/spiflash: Change to use low-level SPI object not uPy one.
This patch alters the SPI-flash memory driver so that it uses the new
low-level C SPI protocol (from drivers/bus/spi.h) instead of the uPy SPI
protocol (from extmod/machine_spi.h).  This allows the SPI-flash driver to
be used independently from the uPy runtime.
2018-03-10 00:59:43 +11:00
Damien George 58ebeca6a9 drivers/bus: Pull out software SPI implementation to dedicated driver.
This patch takes the software SPI implementation from extmod/machine_spi.c
and moves it to a dedicated file in drivers/bus/softspi.c.  This allows the
SPI driver to be used independently of the uPy runtime, making it a more
general component.
2018-03-10 00:59:43 +11:00
Damien George 4e48700f9a drivers/memory/spiflash: Add support for QSPI interface.
The spiflash memory driver is reworked to allow the underlying bus to be
either normal SPI or QSPI.  In both cases the bus can be implemented in
software or hardware, as long as the spiflash driver is passed the correct
configuration structure.
2018-03-02 23:54:09 +11:00
Damien George 1da2d45de6 drivers/bus: Add QSPI abstract type with software QSPI implementation.
A new directory drivers/bus/ is introduced, which can hold implementations
of bus drivers.  A software QSPI implementation is added.
2018-03-02 23:52:59 +11:00
Damien George 3759aa2cc9 drivers/sdcard: Update SD mounting example code for ESP8266. 2018-02-18 23:40:54 +11:00
Damien George 93d5c9e1c4 drivers/cc3200: Update to work with new stm32 SPI API. 2018-02-05 14:32:56 +11:00
Hemanth kumar a44892dd0d drivers/sdcard: Update doc for ESP8266 to use correct SPI number.
machine.SPI(0) results in ValueError on ESP8266.  SPI(1) is the user
hardware SPI port (or use SPI(-1) for software SPI).
2018-01-31 21:25:58 +11:00
Damien George efdda2c62d stm32: Add support for DHT11/DHT22 sensors. 2018-01-31 18:12:53 +11:00