Commit Graph

97 Commits

Author SHA1 Message Date
Jim Mussared 7f5d5c7271 all: Rename mod_umodule*, ^umodule* to remove the "u" prefix.
This work was funded through GitHub Sponsors.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-06-08 17:54:07 +10:00
robert-hh 73cc6b750e ports: Enable os.sync() for esp32, esp8266, rp2, mimxrt, samd51.
These have by default FAT support.  The SAMD21 build does not support FAT.
The nrf port also implements os.sync(), but has it's own copy of moduos.c.

Code size increases seen: 40 to 56 bytes.

Signed-off-by: robert-hh <robert@hammelrath.com>
2023-06-01 11:39:01 +10:00
Damien George 38243cd8e0 extmod/machine_pwm: Remove PWM_INIT and PWM_DUTY_U16_NS config options.
All ports that enable MICROPY_PY_MACHINE_PWM now enable these two
sub-options, so remove these sub-options altogether to force consistency in
new ports that implement machine.PWM.

Signed-off-by: Damien George <damien@micropython.org>
2023-05-04 13:19:19 +10:00
Glenn Moloney 7fa322afb8 esp32,esp8266: Add support for the Espressif ESP-NOW protocol.
ESP-NOW is a proprietary wireless communication protocol which supports
connectionless communication between ESP32 and ESP8266 devices, using
vendor specific WiFi frames.  This commit adds support for this protocol
through a new `espnow` module.

This commit builds on original work done by @nickzoic, @shawwwn and with
contributions from @zoland.  Features include:
- Use of (extended) ring buffers in py/ringbuf.[ch] for robust IO.
- Signal strength (RSSI) monitoring.
- Core support in `_espnow` C module, extended by `espnow.py` module.
- Asyncio support via `aioespnow.py` module (separate to this commit).
- Docs provided at `docs/library/espnow.rst`.

Methods available in espnow.ESPNow class are:
- active(True/False)
- config(): set rx buffer size, read timeout and tx rate
- recv()/irecv()/recvinto() to read incoming messages from peers
- send() to send messages to peer devices
- any() to test if a message is ready to read
- irq() to set callback for received messages
- stats() returns transfer stats:
    (tx_pkts, tx_pkt_responses, tx_failures, rx_pkts, lost_rx_pkts)
- add_peer(mac, ...) registers a peer before sending messages
- get_peer(mac) returns peer info: (mac, lmk, channel, ifidx, encrypt)
- mod_peer(mac, ...) changes peer info parameters
- get_peers() returns all peer info tuples
- peers_table supports RSSI signal monitoring for received messages:
    {peer1: [rssi, time_ms], peer2: [rssi, time_ms], ...}

ESP8266 is a pared down version of the ESP32 ESPNow support due to code
size restrictions and differences in the low-level API.  See docs for
details.

Also included is a test suite in tests/multi_espnow.  This tests basic
espnow data transfer, multiple transfers, various message sizes, encrypted
messages (pmk and lmk), and asyncio support.

Initial work is from https://github.com/micropython/micropython/pull/4115.
Initial import of code is from:
https://github.com/nickzoic/micropython/tree/espnow-4115.
2023-05-01 16:47:21 +10:00
Damien George 5be20b67df esp32/modutime: Use extmod version of time module.
No API or functional change.

Signed-off-by: Damien George <damien@micropython.org>
2023-04-27 15:11:51 +10:00
Jim Mussared eb51ca4a11 esp32: Use extmod/modnetwork.c instead of port-specific version.
Rather than duplicating the implementation of `network`, this allows ESP32
to use the shared one in extmod.  In particular this gains access to
network.hostname and network.country.

Set default hostnames for various ESP32 boards.

Other than adding these two methods and the change to the default hostname,
there is no other user-visible change.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-03-01 01:26:54 +11:00
Damien Tournoud e982c1d8de esp32/network_lan: Add support for SPI-based ethernet chips.
Add support for various SPI-based ethernet chips (W5500, KSZ8851SNL,
DM9051) to the ESP32 port.  This leverages the existing support in ESP-IDF
for these chips -- which configures these chips in "MAC raw" mode -- and
the existing support for network.LAN in the ESP32 port.  In particular,
this doesn't leverage the wiznet5k support that is used on the rp2 and
stm32 ports (because that's for native use of lwIP).

Tested on the POE Featherwing (with the SJIRQ solder jumper bridged) and a
ESP32-S3 feather.

A note about the interrupt pin: The W5500 implementation within ESP-IDF
relies on hardware interrupt, and requires the interrupt pin from the W5500
to be wired to a GPIO.  This is not the case by default on the Adafruit
Ethernet FeatherWing, which makes it not directly compatible with this
implementation.
2023-01-18 11:16:09 +11:00
David Lechner 4dcfd19bbf extmod/extmod.cmake: Add MICROPY_PY_BTREE compiler definition.
Instead of defining `MICROPY_PY_BTREE` in `mpconfigport.h` we can define
it via CMake similar to how other ports that use Makefiles define it in
`mpconfigport.mk`.

Signed-off-by: David Lechner <david@pybricks.com>
2022-11-17 23:20:58 +11:00
Jim Mussared 092784da19 ports: Remove unused mp_type_{fileio/textio} macros in mpconfigport.h.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-07-26 18:07:22 +10:00
Damien George 5dbb822ca4 esp32/mpconfigport: Enable BLE synchronous events and pairing/bonding.
Signed-off-by: Damien George <damien@micropython.org>
2022-07-22 17:41:21 +10:00
David Lechner b63282c361 esp32: Use MP_REGISTER_ROOT_POINTER().
This uses MP_REGISTER_ROOT_POINTER() to register all root pointers in the
esp32 port.

Signed-off-by: David Lechner <david@pybricks.com>
2022-07-18 13:50:34 +10:00
David Lechner e531b72b56 extmod/nimble: Use MP_REGISTER_ROOT_POINTER().
This uses MP_REGISTER_ROOT_POINTER() to register bluetooth_nimble_memory
and bluetooth_nimble_root_pointers and removes the same from all
mpconfigport.h.

Signed-off-by: David Lechner <david@pybricks.com>
2022-07-18 13:50:14 +10:00
David Lechner 81dbea1ce3 shared/readline: Use MP_REGISTER_ROOT_POINTER().
This uses MP_REGISTER_ROOT_POINTER() to register the readline_history root
pointer array used by shared/readline.c and removes the registration from
all mpconfigport.h files.

This also required adding a new MICROPY_READLINE_HISTORY_SIZE config option
since not all ports used the same sized array.

Signed-off-by: David Lechner <david@pybricks.com>
2022-07-18 13:48:49 +10:00
Damien George f63b4f85aa py/parse: Work around xtensa esp-2020r3 compiler bug.
This commit works around a bug in xtensa-esp32-elf-gcc version esp-2020r3.

The bug is in generation of loop constructs.  The below code is generated
by the xtensa-esp32 compiler.  The first extract is the buggy machine code
and the second extract is the corrected machine code.  The test
`basics/logic_constfolding.py` fails with the first code and succeeds with
the second.

Disassembly of section .text.push_result_rule:

00000000 <push_result_rule>:
  ...
  d6:   209770       or      a9, a7, a7
  d9:   178976       loop    a9, f4 <push_result_rule+0xf4>
                     d9: R_XTENSA_SLOT0_OP   .text.push_result_rule+0xf4
  dc:   030190       rsr.lend        a9
  df:   130090       wsr.lbeg        a9
  e2:   a8c992       addi    a9, a9, -88
  e5:   06d992       addmi   a9, a9, 0x600
  e8:   130190       wsr.lend        a9
  eb:   002000       isync
  ee:   030290       rsr.lcount      a9
  f1:   01c992       addi    a9, a9, 1
  f4:   1494e7       bne     a4, a14, 10c <push_result_rule+0x10c>
                     f4: R_XTENSA_SLOT0_OP   .text.push_result_rule+0x10c

Disassembly of section .text.push_result_rule:

00000000 <push_result_rule>:
  ...
  d6:   209770       or      a9, a7, a7
  d9:   178976       loop    a9, f4 <push_result_rule+0xf4>
                     d9: R_XTENSA_SLOT0_OP   .text.push_result_rule+0xf4
  dc:   030190       rsr.lend        a9
  df:   130090       wsr.lbeg        a9
  e2:   000091       l32r    a9, fffc00e4 <push_result_rule+0xfffc00e4>
                     e2: R_XTENSA_SLOT0_OP   .literal.push_result_rule+0x18
  e5:   0020f0       nop
  e8:   130190       wsr.lend        a9
  eb:   002000       isync
  ee:   030290       rsr.lcount      a9
  f1:   01c992       addi    a9, a9, 1
  f4:   1494e7       bne     a4, a14, 10c <push_result_rule+0x10c>
                     f4: R_XTENSA_SLOT0_OP   .text.push_result_rule+0x10c

Work done in collaboration with @jimmo.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-09 13:56:30 +10:00
Damien George 6bda80d811 esp32/machine_i2c: Implement write-then-read I2C transfers.
I2C transfers are much more efficient if they are combined, instead of
doing separate writes and reads.

Fixes issue #7134.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-01 13:20:30 +10:00
Damien George 6e71cde6aa ports: Use default VFS config for import_stat and builtin_open.
For ports with MICROPY_VFS and MICROPY_PY_IO enabled their configuration
can now be simplified to use the defaults for mp_import_stat and
mp_builtin_open.

This commit makes no functional change, except for the following minor
points:
- the built-in "open" is removed from the minimal port (it previously did
  nothing)
- the duplicate built-in "input" is removed from the esp32 port
- qemu-arm now delegates to VFS import/open

Signed-off-by: Damien George <damien@micropython.org>
2022-05-25 13:04:45 +10:00
Damien George c70f96f1c5 esp32: Track allocated iRAM and free it on soft reset.
This makes sure all iRAM allocated for native code is freed on soft reset.

Signed-off-by: Damien George <damien@micropython.org>
2022-05-19 17:31:56 +10:00
Jim Mussared 24127a4ac4 esp32: Make port-specific modules use MP_REGISTER_MODULE.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-05-18 20:56:30 +10:00
Jim Mussared bb794f05b7 extmod: Make port-included extmod modules use MP_REGISTER_MODULES.
_onewire, socket, and network were previously added by the port rather
than objmodule.c.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-05-18 20:49:12 +10:00
Damien George 818be10bb5 zephyr/moduos: Convert module to use extmod version.
This also adds uos.unlink(), for all ports that use extmod/moduos.c.

Signed-off-by: Damien George <damien@micropython.org>
2022-03-09 10:03:23 +11:00
Damien George 1c53d85162 esp32/moduos: Convert module to use extmod version.
Signed-off-by: Damien George <damien@micropython.org>
2022-03-09 10:03:23 +11:00
Damien George 926b554daf extmod/moduos: Create general uos module to be used by all ports.
Based on the rp2 port version, with the rp2 port converted to use this
module.

Signed-off-by: Damien George <damien@micropython.org>
2022-03-09 10:03:23 +11:00
Daniël van de Giessen 665f0e2a68 esp32: Sleep one tick in MICROPY_EVENT_POLL_HOOK.
If MicroPython threads are enabled, loops waiting for an incoming event
should release the GIL and suspend, allowing other tasks to run while they
wait.

Prior to this commit, the problem can easily be observed by running a
thread that is both busy and regularly releases the GIL (for example a loop
doing something then sleeping a few ms after each iteration).  When the
main task is at the REPL, the thread is significantly stalled.  If the main
task is manually made to release the GIL (for example, by calling
utime.sleep_ms(500)) the other thread can be seen immediately working at
the expected speed again.

Additionally, there are various instances in where blocking functions run
MICROPY_EVENT_POLL_HOOK in a loop while they wait for a certain event/
condition.  For example the uselect methods poll objects to determine
whether data is available, but uses 100% of CPU while it does, constantly
calling MICROPY_EVENT_POLL_HOOK in the process.

The MICROPY_EVENT_POLL_HOOK macro is only ever used in waiting loops, where
(if threads are enabled) it makes sense to yield for a single tick so that
these loops do not consume all CPU cycles but instead other threads may
execute.  (In fact, the thing these loops wait for may even indirectly or
directly depend on another task being able to run.)

This change moves the sleep that was inside the REPL input function to
inside the MICROPY_EVENT_POLL_HOOK macro, where the GIL is already being
released, solving both the blocking REPL issue and the 100% CPU use issue
at the same time.

Signed-off-by: Daniël van de Giessen <daniel@dvdgiessen.nl>
2022-03-02 12:57:43 +11:00
Damien George 5935fa229c esp32/mpconfigport.h: Enable remaining features to get to "extra" level.
Signed-off-by: Damien George <damien@micropython.org>
2022-02-18 16:01:18 +11:00
Damien George c8cd5a9960 esp32/mpconfigport.h: Use the "extra" feature level.
This commit is a no-op change to simplify existing config.

Signed-off-by: Damien George <damien@micropython.org>
2022-02-18 15:50:01 +11:00
Damien George fbd47fc46c ports: Consolidate inclusion of umachine module in built-ins.
The inclusion of `umachine` in the list of built-in modules is now done
centrally in py/objmodule.c.  Enabling MICROPY_PY_MACHINE will include this
module.

As part of this, all ports now have `umachine` as the core module name
(previously some had only `machine` as the name).

Signed-off-by: Damien George <damien@micropython.org>
2022-02-03 10:08:54 +11:00
Damien George b96318ab61 esp32: Enable platform module with IDF version.
Output looks like this:

    >>> import platform
    >>> platform.libc_ver()
    ('newlib', '3.0.0')
    >>> platform.platform()
    'MicroPython-1.17.0-xtensa-IDFv4.2.2-with-newlib3.0.0'
    >>> platform.python_compiler()
    'GCC 8.4.0'

Signed-off-by: Damien George <damien@micropython.org>
2022-01-06 18:25:48 +11:00
IhorNehrutsa b491967bbd esp32/machine_pwm: Implement duty_u16() and duty_ns() PWM methods.
The methods duty_u16() and duty_ns() are implemented to match the existing
docs.  The duty will remain the same when the frequency is changed.
Standard ESP32 as well as S2, S3 and C3 are supported.

Thanks to @kdschlosser for the fix for rounding in resolution calculation.

Documentation is updated and examples expanded for esp32, including the
quickref and tutorial.  Additional notes are added to the machine.PWM docs
regarding limitations of hardware PWM.
2021-12-03 23:58:52 +11:00
Seon Rozenblum 1904833e0c esp32: Add SDCard support for S3, and a GENERIC_S3_SPIRAM board.
Also add support for GPIO 47 and 48 on S3 boards.
2021-11-19 14:05:55 +11:00
MikeTeachman 6d5296e65e stm32,esp32: In machine_i2s, make object reference arrays root pointers.
This change eliminates the risk of the IRQ callback accessing invalid data.
Discussed here:
https://github.com/micropython/micropython/pull/7183#discussion_r660209875

Signed-off-by: Mike Teachman <mike.teachman@gmail.com>
2021-11-13 12:22:42 +11:00
Damien George 549448e8bb esp32: Enable optimisations and move code to iRAM to boost performance.
This commit enables some significant optimisations for esp32:
- move the VM to iRAM
- move hot parts of the runtime to iRAM (map lookup, load global/name,
  mp_obj_get_type)
- enable MICROPY_OPT_LOAD_ATTR_FAST_PATH
- enable MICROPY_OPT_MAP_LOOKUP_CACHE
- disable assertions
- change from -Os to -O2 for compilation

It's hard to measure performance on esp32 due to external flash and
hardware caching.  But this set of changes improves performance compared to
master by (on a TinyPICO with the GENERIC build, using IDF 4.2.2, running
at 160MHz):

diff of scores (higher is better)
N=100 M=100    esp32-master -> esp32-perf       diff      diff% (error%)
bm_chaos.py           71.28 ->     268.08 :  +196.80 = +276.094% (+/-0.04%)
bm_fannkuch.py        44.10 ->      69.31 :   +25.21 = +57.166% (+/-0.01%)
bm_fft.py           1385.27 ->    2538.23 : +1152.96 = +83.230% (+/-0.01%)
bm_float.py         1060.94 ->    3900.62 : +2839.68 = +267.657% (+/-0.03%)
bm_hexiom.py          10.90 ->      32.79 :   +21.89 = +200.826% (+/-0.02%)
bm_nqueens.py       1000.83 ->    2372.87 : +1372.04 = +137.090% (+/-0.01%)
bm_pidigits.py       288.13 ->     664.40 :  +376.27 = +130.590% (+/-0.46%)
misc_aes.py          102.45 ->     345.69 :  +243.24 = +237.423% (+/-0.01%)
misc_mandel.py      1016.58 ->    2121.92 : +1105.34 = +108.731% (+/-0.01%)
misc_pystone.py      632.91 ->    1801.87 : +1168.96 = +184.696% (+/-0.08%)
misc_raytrace.py      76.66 ->     281.78 :  +205.12 = +267.571% (+/-0.05%)
viper_call0.py       210.63 ->     273.17 :   +62.54 = +29.692% (+/-0.01%)
viper_call1a.py      208.45 ->     269.51 :   +61.06 = +29.292% (+/-0.00%)
viper_call1b.py      185.44 ->     228.25 :   +42.81 = +23.086% (+/-0.01%)
viper_call1c.py      185.86 ->     228.90 :   +43.04 = +23.157% (+/-0.01%)
viper_call2a.py      207.10 ->     267.25 :   +60.15 = +29.044% (+/-0.00%)
viper_call2b.py      173.76 ->     209.42 :   +35.66 = +20.523% (+/-0.00%)

Five tests have more than 3x speed up (200%+).

The performance of the tests bm_fft, bm_pidigits and misc_aes now scale
with CPU frequency (eg changing frequency to 240MHz boosts the performance
of these by 50%), which means they are no longer influenced by timing of
external flash access.  (The viper_call* tests did previously scale with
CPU frequency, and they still do.)

Turning off assertions reduces code size by about 80k, and going from -Os
to -O2 costs about 100k, so the net change in code size (for the GENERIC
board) is about +20k.

If a board wants to enable assertions, or use -Os instead of -O2, that's
still possible by overriding the sdkconfig parameters.

Signed-off-by: Damien George <damien@micropython.org>
2021-10-16 00:07:11 +11:00
Damien George ea186de4c5 esp32: Split out WLAN code from modnetwork.c to network_wlan.c.
To match network_lan.c and network_ppp.c, and make it clear what code is
specifically for WLAN support.

Also provide a configuration option MICROPY_PY_NETWORK_WLAN which can be
used to fully disable network.WLAN (it's enabled by default).

Signed-off-by: Damien George <damien@micropython.org>
2021-09-24 12:41:35 +10:00
Damien George f046b50ca5 esp32/main: Add option for a board to hook code into startup sequence.
To do this the board must define MICROPY_BOARD_STARTUP, set
MICROPY_SOURCE_BOARD then define the new start-up code.

For example, in mpconfigboard.h:

    #define MICROPY_BOARD_STARTUP board_startup
    void board_startup(void);

in mpconfigboard.cmake:

    set(MICROPY_SOURCE_BOARD
        ${MICROPY_BOARD_DIR}/board.c
    )

and in a new board.c file in the board directory:

    #include "py/mpconfig.h"

    void board_startup(void) {
        boardctrl_startup();
        // extra custom startup
    }

This follows stm32's boardctrl facilities.

Signed-off-by: Damien George <damien@micropython.org>
2021-09-24 12:23:14 +10:00
Damien George af64c2ddbd extmod/machine_pwm: Factor out machine.PWM bindings to common code.
This commit refactors machine.PWM and creates extmod/machine_pwm.c.  The
esp8266, esp32 and rp2 ports all use this and provide implementations of
the required PWM functionality.  This helps to reduce code duplication and
keep the same Python API across ports.

This commit does not make any functional changes.

Signed-off-by: Damien George <damien@micropython.org>
2021-09-04 16:31:17 +10:00
Damien George d41f6dde56 extmod/modonewire: Make _onewire module configurable via macro option.
Signed-off-by: Damien George <damien@micropython.org>
2021-09-02 13:11:23 +10:00
Damien George afe0634c98 extmod/machine_spi: Make SoftSPI configurable via macro option.
Signed-off-by: Damien George <damien@micropython.org>
2021-09-02 13:11:23 +10:00
Damien George 122d901ef1 extmod/machine_i2c: Make SoftI2C configurable via macro option.
The zephyr port doesn't support SoftI2C so it's not enabled, and the legacy
I2C constructor check can be removed.

Signed-off-by: Damien George <damien@micropython.org>
2021-09-02 13:11:23 +10:00
Jim Mussared 71f4faac27 esp32: Replace esp.neopixel with machine.bitstream.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-08-19 22:50:32 +10:00
Jim Mussared 5733c49174 stm32,esp32,rp2: Enable MICROPY_PY_FSTRINGS by default.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-08-14 16:58:40 +10:00
Jim Mussared bfc8e88ce1 esp32/mpconfigport.h: Enable reverse and inplace special methods.
Reverse operations are supported on stm32 and rp2, and esp32 has enough
space to also enable inplace operations, to make it complete.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-08-07 13:27:09 +10:00
Damien George 6823514845 esp32: Add initial support for ESP32C3 SoCs.
Supported features for this SoC are:
- UART REPL, filesystem
- Pin, ADC, PWM, SoftI2C, SoftSPI, Timer, RTC
- OneWire, DHT, NeoPixel
- RMT
- WiFi, Bluetooth

Signed-off-by: Damien George <damien@micropython.org>
2021-07-18 23:58:24 +10:00
Damien George 0fc0ccabec esp32/machine_i2s: Add MICROPY_PY_MACHINE_I2S option, enable by default.
Signed-off-by: Damien George <damien@micropython.org>
2021-07-18 12:31:13 +10:00
Damien George 1f9243f8d4 esp32/machine_dac: Add MICROPY_PY_MACHINE_DAC option, enable by default.
Signed-off-by: Damien George <damien@micropython.org>
2021-07-18 12:11:10 +10:00
Damien George e9e9c76ddf all: Rename mp_keyboard_interrupt to mp_sched_keyboard_interrupt.
To match mp_sched_exception() and mp_sched_schedule().

Signed-off-by: Damien George <damien@micropython.org>
2021-04-30 15:13:43 +10:00
Damien George 7cbf826a95 py/scheduler: Add mp_sched_exception() to schedule a pending exception.
This helper is added to properly set a pending exception, to mirror
mp_sched_schedule(), which schedules a function.

Signed-off-by: Damien George <damien@micropython.org>
2021-04-30 15:13:43 +10:00
Damien George 66a86a0615 esp32: Add initial support for ESP32S2 SoCs.
Builds against IDF v4.3-beta2.

Signed-off-by: Damien George <damien@micropython.org>
2021-04-15 10:31:06 +10:00
Damien George ab9d47e023 esp32: Enable btree module.
This was disabled with the move to CMake, and this commit reinstates it.

Signed-off-by: Damien George <damien@micropython.org>
2021-04-09 13:33:26 +10:00
Thorsten von Eicken 902da05a18 esp32: Set MICROPY_USE_INTERNAL_ERRNO=0 to use toolchain's errno.h.
The underlying OS (the ESP-IDF) uses it's own internal errno codes and so
it's simpler and cleaner to use those rather than trying to convert
everything to the values defined in py/mperrno.h.
2021-02-15 23:47:02 +11:00
Damien George f12462ddc4 esp32: Remove obsolete IDF v3 code wrapped in MICROPY_ESP_IDF_4.
Signed-off-by: Damien George <damien@micropython.org>
2021-02-15 23:22:05 +11:00
Damien George da2b5fa1c1 esp32/boards: Enable BLE on all boards.
BLE was enabled by default on all boards in the existing make build.

Signed-off-by: Damien George <damien@micropython.org>
2021-02-15 16:40:07 +11:00