Commit Graph

14495 Commits

Author SHA1 Message Date
robert-hh 7e0b1bc95d samd/mcu: Use the FDPLL96M clock for the SAMD21 CPU.
Allowing to increase the clock a little bit to 54Mhz.  Not much of a gain,
but useful for generating a RNG entropy source from the jitter between
DFLL48M and FDPLL96M.
2023-02-21 23:15:00 +11:00
robert-hh 60ab556385 samd/mcu: Rework the comments in clock_config.c.
For more clarity. clock_config.c is not overly readable, so comments are
important.
2023-02-21 23:14:45 +11:00
robert-hh c3afafd1ec samd/boards: Clean up comments and some pins in pins.csv files.
Remove two SPARKFUN_SAMD51_THINGS_PLUS pin definitions.  There were
definitions of TXD and RXD, but these pins do not exist on the board.  They
were only shown in the schematics.

Also remove any reference to LED_.  This is just a text change, no
functional change.
2023-02-21 23:13:01 +11:00
Damien George 95082693c3 extmod/modbtree: Move system includes within MICROPY_PY_BTREE guard.
Since commit d6d8722558, modbtree.c is
included unconditionally in the build (if SRC_EXTMOD_C is used).  So guard
the includes of system headers files in case a target doesn't have them.

Signed-off-by: Damien George <damien@micropython.org>
2023-02-21 17:28:47 +11:00
Damien George e0d1127246 tools/ci.sh: Add unix, stm32 and rp2 ports to code size check.
Now that the code-size-check CI action gives a nice report (as a comment)
on the code size difference, it's possible to have a few more ports
reported there.  In this commit, unix, stm32 and rp2 are added.  Unix
represents non-MCU builds, and stm32 and rp2 represent ARM-based builds,
for ports that have lots of features enabled.

Signed-off-by: Damien George <damien@micropython.org>
2023-02-20 11:26:23 +11:00
manobendro 294098d28e minimal: Increase heap size for Linux builds.
Otherwise use of the REPL is quite limited.

Fixes issue #10644.
2023-02-20 10:44:14 +11:00
robert-hh 4598b89ce9 samd: Add Pin.board and Pin.cpu classes to Pin.
For compatibility with other ports.  Code increase up to ~1250 bytes for
SAMD21.  The feature is configurable via MICROPY_PY_MACHINE_PIN_BOARD_CPU
in case flash memory is tight.
2023-02-17 17:27:21 +11:00
robert-hh 7198c25175 mimxrt/Makefile: Move the FROZEN_MANIFEST setting after board config.
Such that a respective statement in mpconfigboard.mk is executed first.
2023-02-17 14:29:04 +11:00
Damien George b257c0152b rp2/cyw43_configport: Specify the chipset firmware include file.
Required by the latest version of cyw43-driver.

Signed-off-by: Damien George <damien@micropython.org>
2023-02-17 14:03:19 +11:00
Damien George 198579ad6a lib/pico-sdk: Update to version 1.5.0.
Signed-off-by: Damien George <damien@micropython.org>
2023-02-17 14:03:19 +11:00
Damien George fa8b2cb26d lib/cyw43-driver: Update driver to latest version.
Changes since the previous version:
- add an API to get the BSSID
- support auto channel selection when using BSSID for join
- improve performance for the Murata 1DX module and SDIO
- return EINVAL for invalid auth type
- add support for Bluetooth over SPI
- convert 4343WA1-7.45.98.50.combined to C header files
2023-02-17 14:03:19 +11:00
Damien George c6140ad0d4 rp2/mpconfigport: Enable os.dupterm and hashlib.sha1 on all boards.
This further aligns the features available on Pico and Pico W boards.

os.dupterm is generally useful, but can still be disabled by a board if
needed.  hashlib.sha1 requires mbedtls for the implementation, but that's
always available (due to ucryptolib's requirements).  The entire hashlib
module can still be disabled by an individual board if needed.

Fixes issue #7881.

Signed-off-by: Damien George <damien@micropython.org>
2023-02-17 13:43:03 +11:00
Damien George 4bd4b6a47e tools/ci.sh: Install pkg-config for macos builds.
Signed-off-by: Damien George <damien@micropython.org>
2023-02-17 13:13:57 +11:00
Damien George c7391a2d80 github/workflows: Add "shared/**" to list of paths that trigger CI.
All ports use code from shared/ so should rebuild when it changes.

Signed-off-by: Damien George <damien@micropython.org>
2023-02-17 12:33:13 +11:00
Jim Mussared b1cdb205ec shared/runtime/softtimer: Fix ticks range when computing ticks diff.
The previous computation incorrectly assumed that the uint32_t ticks
counter MICROPY_SOFT_TIMER_TICKS_MS was in the range [0,0x80000000) where
its actually [0,0xffffffff].  This means the diff calculation can be
simplified compared to the original implementation copied from
utime_mphal.c, which has to deal with a ticks range constrained by the
small int range.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-02-17 12:17:28 +11:00
robert-hh de1f1dd164 shared/runtime/softtimer: Use consistently the same clock source.
Before, both uwTick and mp_hal_ticks_ms() were used as clock source.  That
assumes, that these two are synchronous and start with the same value,
which may be not the case for all ports.  If the lag between uwTick and
mp_hal_ticks_ms() is larger than the timer interval, the timer would either
rush up until the times are synchronous, or not start until uwTick wraps
over.

As suggested by @dpgeorge, MICROPY_SOFT_TIMER_TICKS_MS is now used in
softtimer.c, which has to be defined in a port's mpconfigport.h with
the variable that holds the SysTick counter.

Note that it's not possible to switch everything in softtimer.c to use
mp_hal_ticks_ms() because the logic in SysTick_Handler that schedules
soft_timer_handler() uses (eg on mimxrt) the uwTick variable directly
(named systick_ms there), and mp_hal_ticks_ms() uses a different source
timer.  Thus it is made fully configurable.
2023-02-16 12:59:48 +11:00
iabdalkader 68d049ea5e nrf/Makefile: Add support for BOSSAC flasher.
Used by Arduino boards.
2023-02-16 12:46:23 +11:00
Jim Mussared 4eb72b34df stm32/boards/ARDUINO_PORTENTA_H7: Use default aioble.
The default now includes all sub-components (security, l2cap, etc)
and using the kwarg options is no longer supported.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-02-16 12:32:03 +11:00
Jim Mussared 5812611ab2 rp2/boards/ARDUINO_NANO_RP2040_CONNECT: Use default aioble.
The default now includes all sub-components (security, l2cap, etc)
and using the kwarg options is no longer supported.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-02-16 12:32:03 +11:00
iabdalkader e140c7d26a stm32/boards/ARDUINO_PORTENTA_H7: Fix macro value check for QSPI.
QSPI deepsleep should be enabled only when the internal flash storage is
not used.
2023-02-16 12:21:48 +11:00
Andrew Leech 75e7e7d034 stm32/boards/STM32F769DISC: Fix building with USE_QSPI_XIP=1.
Signed-off-by: Damien George <damien@micropython.org>
2023-02-16 12:04:29 +11:00
Damien George 177ae2f346 tests/float: Make output of math function tests more readable.
By explicitly naming the function, its arguments, and result.

Signed-off-by: Damien George <damien@micropython.org>
2023-02-16 10:38:38 +11:00
Damien George 799d888182 tests/float: Add domain checks for log and also -inf.
Signed-off-by: Damien George <damien@micropython.org>
2023-02-16 10:26:33 +11:00
Damien George fe330c74f4 extmod/utime_mphal: Fix comment re delta range check in time_ticks_add.
Signed-off-by: Damien George <damien@micropython.org>
2023-02-15 14:16:31 +11:00
Damien George e1f211c6b5 examples/bluetooth: Fix check for _conn_handle being None.
Fixes issue #10755.

Signed-off-by: Damien George <damien@micropython.org>
2023-02-15 14:14:49 +11:00
Damien George 41ed01f139 tests/micropython: Split viper_misc test into two files.
So it can run on targets with low memory, eg esp8266.

Also enable the viper_4args() sub-test, which is now supported.

Signed-off-by: Damien George <damien@micropython.org>
2023-02-09 16:12:25 +11:00
Damien George d99ebb310c tests/extmod: Skip vfs tests if target doesn't have enough memory.
Signed-off-by: Damien George <damien@micropython.org>
2023-02-09 15:32:06 +11:00
Damien George b1123a54c1 tests/extmod: Get DecompIO test running on low-memory targets.
By changing the zlib header so that it uses a small (256 byte) window.

Signed-off-by: Damien George <damien@micropython.org>
2023-02-09 15:20:25 +11:00
Damien George 5c3c1c737e tests/float: Skip new complex tests if complex unavailable.
These complex tests were recently added.

Signed-off-by: Damien George <damien@micropython.org>
2023-02-09 15:20:00 +11:00
Jim Mussared 9848b0685f py/mkrules.cmake: Force build mpversion.h and frozen_content.c.
This ensures that all builds unconditionally run makeversionhdr.py and
makemanifest.py to generate mpversion.h and frozen_content.c respectively.
This now matches the Makefile behavior, and in particular this fixes the
issue on ESP32 builds that changes in code-to-be-frozen will cause the
build to update. Both these already tools know not to touch their output
if there is no change.

This work was funded through GitHub Sponsors.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-02-08 12:24:15 +11:00
Damien George 35524a6fda examples/rp2: Add comment that examples using IO25 don't work on Pico W.
Signed-off-by: Damien George <damien@micropython.org>
2023-02-07 15:03:14 +11:00
Damien George 0afe60b876 rp2/rp2_pio: Track use of PIO resources and free them on soft reset.
Prior to this commit, on Pico W (where the CYW43 driver is enabled) the PIO
instruction memory was not released on soft reset, so using PIO after a
soft reset would eventually (after a few soft resets) lead to ENOMEM when
allocating a PIO program.

This commit fixes that by tracking the use of PIO memory by this module and
freeing it on soft reset.

Similarly, use of the state machines themselves are tracked and released on
soft reset.

Fixes issue #9003.

Signed-off-by: Damien George <damien@micropython.org>
2023-02-07 14:52:36 +11:00
Damien George 9ea64a36ac top: Update .git-blame-ignore-revs for latest formatting commit.
Signed-off-by: Damien George <damien@micropython.org>
2023-02-03 17:09:19 +11:00
Jim Mussared 8b27482692 top: Update Python formatting to black "2023 stable style".
See https://black.readthedocs.io/en/stable/the_black_code_style/index.html

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-02-02 12:51:03 +11:00
Damien George fe2a8332ff stm32/boards/NUCLEO_H743ZI2: Refer to NUCLEO_H743ZI for frozen manifest.
Fixes build issue introduced by 6250337c9c

Signed-off-by: Damien George <damien@micropython.org>
2023-02-01 23:22:18 +11:00
Martin Milata 850f09b109 tools/mpy-tool.py: Initialize line_info_top.
Without it the line number mapping doesn't work.

Signed-off-by: Martin Milata <martin@martinmilata.cz>
2023-02-01 13:17:22 +11:00
stijn 6abf03b5d0 windows/msvc: Fix module freezing.
Make this more generally useful and in line with what the mingw
and unix ports do: 16bit dig size to work on 32bit ports, a
self-contained qstrdefs.preprocessed.h because makemanifest.py
uses that, and a dev variant which effectively puts this to use:
previously the uasyncio module wasn't frozen but instead tests
ran by importing it from the extmod/ directory.
2023-02-01 13:10:00 +11:00
stijn 7e9a15966a mpy-cross: Force forward slashes in paths.
Code in tools/mpy-tool.py and py/frozenmod.c relies on the source file
path encoded in a .mpy file to have forward slashes (e.g. by searching
for '/__init__.py').  Enforce that when creating these files, thereby
fixing import of .mpy files and frozen modules not working before
because they could have backslashes when built with the windows port.
2023-02-01 13:10:00 +11:00
stijn e145318a81 windows/msvc: Fix qstr generation dependency.
The mpversion.h file must exist before py/ source can be preprocessed,
but this went unnoticed because micropython.vcxproj always calls
MakeVersionHdr before MakeQstrDefs.
2023-02-01 13:10:00 +11:00
stijn 65941ea0e5 windows/msvc: Make mpy-cross independent of micropython variant.
The variant.props may have incompatible build options which break
the mpy-cross build and in any case mpy-cross has nothing to do
with variant support.
2023-02-01 13:10:00 +11:00
stijn 55a76f4edd windows/msvc: Remove variant suffix from executable filename.
This is in line with the change made for other ports in d53c3b6a: since
the default output directory already includes the variant name in it
there's no need to add it to the executable as well.
2023-02-01 13:10:00 +11:00
Jim Mussared 6250337c9c ports: Make all network-capable boards use bundle-networking.
This will ensure that any board with networking support gets:
 - webrepl
 - mip
 - urequests
 - ntptime

This work was funded through GitHub Sponsors.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-02-01 12:42:06 +11:00
Damien George c9baf498c8 lib/micropython-lib: Update submodule to latest.
This brings in the bundle-networking package.

Signed-off-by: Damien George <damien@micropython.org>
2023-02-01 12:42:06 +11:00
David Lechner 3446d440f6 shared/runtime/gchelper: Drop cpu directive from ARM asm helpers.
This drops the `.cpu` directive from the ARM gchelper_*.s files.  Having
this directive breaks the linker when targeting older CPUs (e.g. `-mthumb
-mthumb-interwork` for `-mcpu=arm7tdmi`).  The actual target CPU should be
determined by the compiler options.

The exact CPU doesn't actually matter, but rather the supported assembly
instruction set.  So the files are renamed to *_thumb1.s and *thumb2.s to
indicate the instruction set support instead of the CPU support.

Signed-off-by: David Lechner <david@pybricks.com>
2023-01-28 15:51:38 +11:00
robert-hh c2ab1b5185 esp32/boards/OLIMEX_ESP32_POE: Remove id from and update board.json. 2023-01-28 15:29:01 +11:00
robert-hh 0baf6c80d9 nrf/mpconfigport: Enable seeding of the PRNG by the hardware RNG.
A suitable function already existed, so just the declaration was needed.
2023-01-28 15:23:26 +11:00
Jay Greco be420bf9bb rp2/boards/NULLBITS_BIT_C_PRO: Add Bit-C PRO board. 2023-01-28 15:14:48 +11:00
Damien George 67fac4ebc5 rp2/machine_pin: Fix configuring OPEN_DRAIN with initial value.
Prior to this commit, Pin(Pin.OPEN_DRAIN, value=0) would not set the
initial value of the open-drain pin to low, instead it would be high.

Signed-off-by: Damien George <damien@micropython.org>
2023-01-24 17:29:45 +11:00
Damien George 8a0353525f rp2/main: Use mp_printf in nlr_jump_fail.
The mp_plat_print output is already being used by the subsequent call to
mp_obj_print_exception().  And this eliminates all references to printf for
this port (at least in non-debug builds).

Signed-off-by: Damien George <damien@micropython.org>
2023-01-24 16:58:29 +11:00
Damien George 1978b838b7 shared/runtime: Use mp_printf consistently, instead of printf.
Signed-off-by: Damien George <damien@micropython.org>
2023-01-24 16:57:26 +11:00