85a648224f
Check for no pullups on I2C on nrf; give arduino nano 33 ble two I2C devices
2019-11-02 22:47:03 -04:00
2f04c5891f
flip it around
2019-10-31 14:11:50 -04:00
ab3da3071c
flip MADCTL BGR bit to reflect RGB colors
2019-10-31 10:11:47 -04:00
d2b613134d
we should use native rotation, and tweak madctl (not done yet)
2019-10-29 22:53:44 -04:00
1e869d1334
switch to 8-bit mode - tested on hardware!
2019-10-29 21:14:45 -04:00
1505da784f
wip
2019-10-28 18:15:02 -04:00
56ac41fabf
Merge pull request #2240 from theacodes/fix-2086
...
Track unadjusted PWM duty cycle to avoid accumulating conversion errors
2019-10-28 14:50:01 -04:00
4b742f88d9
Fix spelling
2019-10-25 10:50:27 -07:00
4fdf518251
Track unadjusted PWM duty cycle to avoid accumulating conversion errors
...
Fixes #2086
When the frequency of a `PWMOut` is change it re-sets the PWM's duty cycle as
well, since the registers have to be re-calculated based on the new frequency.
Unfortunately, `common_hal_pulseio_pwmout_get_duty_cycle`
will return a value very close to, but not exactly, the value passed to `common_hal_pulseio_pwmout_set_duty_cycle`. If the frequency is modified
without the calling code also re-setting the duty cycle then the duty cycle
will decay over time. This fixes that problem by tracking the unadjusted duty
cycle and re-setting the duty cycle to that value when the frequency is changed.
2019-10-23 14:34:14 -07:00
4cd5571203
Adds builds for sparkfun_qwiic_micro with and without flash
2019-10-23 15:05:46 -06:00
7b79ac3739
Parameterize linker script
2019-10-20 23:50:12 -04:00
96756b3945
Add functions to get top and limit stack
2019-10-18 11:04:45 +02:00
8f2e5990db
Changed to follow standard that Pad 0 is always TX
2019-10-17 18:02:05 +11:00
63790f01f8
Merge pull request #2218 from CedarGroveStudios/master
...
Definitions for StringCar M0 Express and AT25SF161-SSHD-T 2MiB SPI flash chip
2019-10-15 09:46:39 -07:00
bd608e0807
remove placeholder
2019-10-14 11:56:53 -07:00
b04a218bbc
initial load of stringcar m0 express defs
2019-10-14 11:56:18 -07:00
44ebc4c95d
establish stringcar m0 express definitions
2019-10-14 11:55:22 -07:00
c1ab2486f9
return chip vcc value
2019-10-12 15:42:15 -04:00
137a4f8a5d
Added new flash SKU for production hardware
2019-10-07 14:50:39 -04:00
7aefcc449a
Add an alternative way to number the USB endpoints
...
Two options available:
- relative numbering (USB_RELATIVE_EP_NUM = 1) - default
- absolute numbering (USB_RELATIVE_EP_NUM = 0) - new!
2019-10-07 12:31:42 +02:00
cdc116291b
Merge pull request #2177 from wallarug/walla/robohatmm1-production
...
Robo HAT MM1 - Fixes after testing
2019-09-26 10:44:55 -07:00
21f8c3e40a
serpente: Update PID and enable as many modules as we can fit
2019-09-26 17:22:18 +02:00
3c99a23adb
fix spi
2019-09-26 21:47:36 +10:00
533a5bc7a3
fixed SPI on M4
2019-09-26 21:43:52 +10:00
5cd10b3ba0
updated robohatmm1_m0
2019-09-26 20:02:09 +10:00
39265fccf3
included a version number
2019-09-26 19:22:51 +10:00
db9495b04b
updated board name
2019-09-26 19:21:53 +10:00
08b0f80879
updated board name
2019-09-26 19:21:24 +10:00
b7e8a031d0
remove frozen busio library
2019-09-26 19:19:54 +10:00
ff13b6f682
updated pins.c
2019-09-26 19:18:50 +10:00
70860e1352
robohatmm1 removed uart and put in correct order
2019-09-22 19:47:44 +10:00
9a74bf929b
Added TFT pins to HalloWing M4 for code compatibility
2019-09-19 14:50:10 -07:00
b7598f7058
Merge branch 'master' of https://github.com/adafruit/circuitpython
2019-09-19 14:20:28 -07:00
0fed65e7d2
Merge remote-tracking branch 'adafruit/master' into dac51
2019-09-19 12:21:54 -07:00
341428b4da
Added SPEAKER pin to HalloWing M4 for code compatibility
2019-09-19 11:23:37 -07:00
8dfb2237d9
Added TOUCH pins to HalloWing M4 for code compatibility
2019-09-19 10:40:13 -07:00
fc90c942f5
Add custom CPX build for display support
2019-09-17 10:40:07 -07:00
dffedd7c86
samd: peripherals: update submodule reference
2019-09-16 21:48:31 -05:00
aa9b57fc81
Merge pull request #2154 from arturo182/master
...
Add support for Serpente boards
2019-09-16 09:20:17 -07:00
e1679acaec
Set as small build regardless of language
2019-09-16 11:51:46 +02:00
61698eb5d8
AnalogOut / AudioOut: Copy settings from Arduino
...
Make changes in asf4_conf even though I think in these cases the
"peripherals" submodule is running the show.
Arduino clocks the DAC at 12MHz but uses the CCTRL setting for
clocking < 1.2MHz (100kSPS).
A fresh clock (6) is allocated for the new 12MHz clock. This matches
the Arduino value, though not the GCLK index.
Modify other settings to more closely resemble Arduino.
In AudioOut, actually clock the waveform data from the timer we set up
for this purpose.
This gives good waveforms when setting AnalogOut full-scale in a loop,
but the rise/fall of waveforms that come from AudioOut are still erratic.
Weirdly, if AudioOut limits its range even slightly (e.g., to 1000..64000)
then the erratic
Note that this will require https://github.com/adafruit/samd-peripherals/pull/26
to be accepted for the submodule update here to work.
2019-09-15 11:30:49 -05:00
c94310411b
Update board def, enable touchio
2019-09-14 21:19:35 -04:00
28bb901d1e
Add support for Serpente boards
2019-09-14 16:06:28 +02:00
b8200d7295
fix atmel-samd filesystem_tick'ing; clear_temp_status() should check for status indicator in use
2019-09-09 23:17:52 -04:00
8066810abb
Merge pull request #2091 from jepler/samd-dma-tracking
...
Samd dma tracking
2019-09-05 11:27:59 -07:00
c5caacafdd
Merge pull request #2100 from pewpew-game/pewpew_m4
...
Add support for PewPew M4 board
2019-09-05 11:26:47 -07:00
d50ed3b6e7
Add support for PewPew M4 board
2019-09-05 10:50:33 +02:00
f3af2a6fb7
Merge remote-tracking branch 'adafruit/master' into choose-usb-devices-xac
2019-09-04 21:56:13 -04:00
195de97c67
use only one endpoint pair for MSC except on SAMD21
2019-09-04 21:45:16 -04:00
fca440fb66
Merge pull request #2113 from tannewt/displayio_hidden
...
Add .hidden to TileGrid and Group
2019-09-04 15:48:00 -04:00
7951646b9a
Disable bitbangio on uGame10
2019-09-04 11:49:47 -07:00
c4d6f4f536
disable 'audiomixer' for all M0 boards
2019-09-01 17:39:20 -05:00
8120f5cdad
Merge branch 'master' of https://github.com/adafruit/circuitpython into mixer_voice
2019-08-29 22:14:53 -05:00
9730d4aa1c
Merge remote-tracking branch 'adafruit/4.1.x' into hallowing_m4_5.x
2019-08-29 14:38:16 -07:00
0aa5507c4c
add additional pin aliases
2019-08-29 13:41:28 -07:00
84839de56f
Hallowing M4
2019-08-29 10:34:46 -07:00
30a9346373
samd: audio_dma: Track channel allocation
...
Previously, we depended on allocated channels to always be
"dma_channel_enabled". However, (A) sometimes, many operations
would take place between find_free_audio_dma_channel and
audio_dma_enable_channel, and (B) some debugging I did led me to believe
that "dma_channel_enabled" would become false when the hardware ended
a scheduled DMA transaction, but while a CP object would still think it
owned the DMA channel.
((B) is not documented in the datasheet and I am not 100% convinced that
my debugging session was not simply missing where we were disabling the
channel, but in either case, it shows a need to directly track allocated
separately from enabled)
Therefore,
* Add audio_dma_{allocate,free}_channel.
* audio_dma_free_channel implies audio_dma_disable_channel
* track via a new array audio_dma_allocated[]
* clear all allocated flags on soft-reboot
* Convert find_free_audio_dma_channel to audio_dma_allocate_channel
* use audio_dma_allocated[] instead of dma_channel_enabled() to check
availability
* remove find_free_audio_dma_channel
* For each one, find a matching audio_dma_disable_channel to convert
to audio_dma_free_channel
Closes : #2058
2019-08-28 17:00:22 -05:00
0b00787b4d
samd: AudioOut: ensure stopped before deinit
...
.. otherwise, a sequence like
>>> a = audioio.AudioOut(board.A0)
>>> a.play(sample, loop=True)
>>> a.deinit()
would potentially leave related DMA channel(s) active.
2019-08-28 16:43:55 -05:00
0876d5c4ad
Disable bitbangio on Itsy M0
...
Also, switch CIRCUITPY_BITBANG_APA102 to makefile setting so it can alter included files
2019-08-27 15:21:47 -07:00
696117b048
disable audiomixer on boards it doesn't fit on
2019-08-25 14:53:34 -05:00
7324b70a7c
Rework based on Dan's review
2019-08-23 15:27:21 -07:00
b992ca80e7
Rejigger builds to fit under 50 minute limit
2019-08-22 20:29:58 -07:00
72e7ffa324
More cleanup
2019-08-22 16:16:09 -07:00
fd8050b369
Turn off features to make room for ePaper
2019-08-22 15:19:45 -07:00
9993a99906
Add initial Monster M4SK build
2019-08-22 14:24:32 -07:00
3a98de1236
Add reset() to display busses to detect whether it works
2019-08-22 14:23:33 -07:00
36a23e0fe3
Rework refresh API and factor common display stuff out
...
NOT TESTED! Just compiles
Fixes #1691
2019-08-22 14:23:27 -07:00
c247e7df9c
Begin refresh rework.
2019-08-22 14:08:33 -07:00
70680d5b22
EPaper displays work mostly.
2019-08-22 14:08:33 -07:00
7cc15e56c8
make translate
2019-08-22 15:20:23 -04:00
6aa311aabd
Merge pull request #2027 from dastels/displayio_fill_area
...
To displayio.Display: expose fill_area and add a property for rotation
2019-08-21 23:48:21 -07:00
d547d59cba
Merge remote-tracking branch 'adafruit/master' into displayio_fill_area
2019-08-21 15:02:51 -04:00
dcf36db263
Make room
2019-08-21 14:46:10 -04:00
6e3a6d0ac5
typo in IncrementalEncoder.c
2019-08-20 16:23:17 -04:00
e00696de7f
merge from upstream and make translate
2019-08-20 13:06:23 -04:00
e3dc5e3a66
Merge remote-tracking branch 'adafruit/master' into run-background-tasks
...
Restore dependencies indicated by indentation in circuitpy_mpconfig.h.
2019-08-19 12:41:20 -04:00
e2a4c76a37
make nrf touchio be generic: now available for SAMD51 too
2019-08-18 08:44:10 -04:00
583392a5c6
Merge pull request #2046 from brentru/add-pyportal-titano
...
Add PyPortal Titano
2019-08-12 16:01:10 -07:00
d9ee2d28a0
atmel-samd: Use RUN_BACKGROUND_TASKS
2019-08-11 08:53:02 -05:00
5a8846d33c
remove cruft from prv board
2019-08-08 15:12:01 -04:00
f87f48ab88
adding pyportal titano board definition
2019-08-08 14:56:28 -04:00
d5658860aa
Added pin definition for battery change enable. Pin used to switch in a 10 ohm resistor during Hub reset & strapping.
2019-08-08 14:39:50 -04:00
fb2712410e
Merge branch 'master' into capablerobot-usbhub
2019-08-08 14:14:23 -04:00
33b949abfa
samd: audio_dma, audio_background: Gate with CIRCUITPY_ defines
...
Some ports which actually don't have audioio or audiobusio were still
calling into audio_dma_background(). This wasn't an error until
the assignment to audio_dma_state in audio_dma_stop was added, though
it's not clear why.
2019-08-07 21:29:24 -05:00
500d1bb168
samd: audio_dma.c: Remove exceptions, just return early
...
These were most useful debugging, but because this code can be reached
"outside of the VM", it's not actually permitted to throw exceptions here.
2019-08-07 20:20:36 -05:00
1d4700cb6c
add pindefs for tft and tft control
2019-08-07 18:29:20 -04:00
8f6eac98f3
add defs for pyportal titano
2019-08-07 17:10:31 -04:00
39c64bf83c
samd: audio_dma_stop: don't free invalid channel
...
audio_dma_stop can be reached twice in normal usage of AudioOut.
This may bear further investigation, but stop it here, by making the
function check for a previously freed channel number. This also prevents
the event channel from being disabled twice.
The first stop location is from audio_dma_get_playing, when the buffers
are exhausted; the second is from common_hal_audioio_audioout_stop when
checking the 'playing' flag.
2019-08-06 22:00:31 -05:00
8b717955ba
samd: audio_dma: wrap dma_{en,dis}able_channel and add error checking
...
It turns out the "disable" error will fire in practice, we'll fix that
next.
2019-08-06 22:00:31 -05:00
6253f11503
samd: audio_dma_stop: Clear out audio_dma_state[]
...
As identified in #1908 , when both AudioOut and PDMIn are used, hard
locks can occur. Because audio_dma_stop didn't clear audio_dma_state[],
a future call to audio_dma_load_next_block could occur using a DMA
object which belongs to PDMIn.
I believe that this Closes : #1908 though perhaps it is still not the full
story.
Testing performed: Loaded a sketch similar to the one on #1908 that
tends to reproduce the bug within ~30s. Ran for >300s without hard
lock. HOWEVER, while my cpx is no longer hard locking, it occasionally
(<1 / 200s) announces
Code done running. Waiting for reload.
(and does so), even though my main loop is surrounded by a 'while True:'
condition, so there are still gremlins nearby.
2019-08-06 21:34:21 -05:00
eee759455a
Merge pull request #2018 from keith-packard/snekboard
...
Add board support for keithp.com SnekBoard
2019-07-31 16:38:51 -07:00
366fdcce18
Merge pull request #2011 from tannewt/ssd1322
...
Add knobs for SSD1322 and two displayio fixes.
2019-07-30 14:15:37 -07:00
9dd56b1566
Merge branch 'master' into snekboard
2019-07-30 14:12:08 -07:00
ecfffac3a8
Delete samd51x19-bootloader-external-flash-crystalless.ld
2019-07-30 19:48:35 +10:00
ff6ae1aefb
Update mpconfigboard.mk to use standard linker file
2019-07-30 19:13:33 +10:00
c6e4ddc88a
boards/snekboard: Delete SPI object reference
...
Snekboard does not expose any pins for SPI to the user, so delete
the SPI object reference as that won't work.
Signed-off-by: Keith Packard <keithp@keithp.com>
2019-07-29 13:45:52 -07:00
9a37c8a4b3
boards/snekboard: Add pin aliases for UART and I2C
...
Allow users to use TX/RX and SDA/SCL names.
Signed-off-by: Keith Packard <keithp@keithp.com>
2019-07-29 13:45:06 -07:00
4387ecfdfb
Update snekboard PID to official value
...
Snekboard has been assigned the following PIDs:
PID 0x004D # bootloader
PID 0x804D # arduino
PID 0x804E # circuitpython
Signed-off-by: Keith Packard <keithp@keithp.com>
2019-07-29 13:15:18 -07:00
326df70ac2
Fix snekboard names
...
Manufacturer -- keithp.com
Product -- snekboard
Signed-off-by: Keith Packard <keithp@keithp.com>
2019-07-29 13:15:18 -07:00
56f710f64f
Add board support for keithp.com SnekBoard
...
This is another SAMDG2118A design with built-in 9V motor controllers
that are designed to be used with Lego PowerFunctions devices.
Signed-off-by: Keith Packard <keithp@keithp.com>
2019-07-29 13:14:37 -07:00
dc1eb73ee7
Merge branch 'master' into wallarug-robohat
2019-07-29 21:53:49 +10:00
8974c7e843
Added BUTTON to pins.c
2019-07-29 16:37:53 +10:00
9e0bea405d
Added BUTTON to pins.c
2019-07-29 16:37:21 +10:00
4d30efdc2a
Updated pins.c for GROVE.
2019-07-29 16:29:48 +10:00
8838e25cb2
Update pins.c
2019-07-29 16:28:35 +10:00
8eab946c5b
Merge pull request #2003 from C47D/travis_check_new_boards
...
Add check to travis to make sure new boards are built, fix #1886
2019-07-28 22:41:59 -05:00
0f30070d58
updated naming schema to match other boards
2019-07-27 17:44:42 +10:00
b06fa48735
updated a few files
2019-07-27 16:59:07 +10:00
9c57f52d1e
updated pins.c for robohat
2019-07-27 16:56:03 +10:00
24e84adc6d
further robohat cleanups
2019-07-27 16:38:47 +10:00
e2b83e2dd9
minor changes robohat d21
2019-07-27 16:36:13 +10:00
36008de2ed
added custom ld file for samd51 no crystal, ext flash
2019-07-27 16:29:30 +10:00
eda3423e35
updated to v1.7 board (samd51)
2019-07-27 16:27:41 +10:00
c61c874a6d
Reduce feather_m0_supersized build size
...
Make it match feather_m0_express
2019-07-26 00:31:41 -07:00
a87094e01f
Turn off GC opt to save space on Trinket Haxpress
2019-07-25 22:56:46 -07:00
4e7de436b4
Update constructors of boards with displays
2019-07-25 22:48:11 -07:00
6b44e40ee8
audiocore: Factor from audioio
...
When nrf pwm audio is introduced, it will be called `audiopwmio`. To
enable code sharing with the existing (dac-based) `audioio`, factor
the sample and mixer types to `audiocore`.
INCOMPATIBLE CHANGE: Now, `Mixer`, `RawSample` and `WaveFile` must
be imported from `audiocore`, not `audioio`.
2019-07-25 06:44:26 -05:00
82ab998cd5
Merge pull request #1998 from tannewt/monocolor
...
Add support for grayscale displays
2019-07-22 22:30:28 -04:00
7cb2aa2d62
Merge pull request #1986 from AnthonyDiGirolamo/patch-1
...
Update Arch Linux ARM compiler installation instructions
2019-07-22 19:29:53 -07:00
1d1b8703b6
Review feedback including NO_BRIGHTNESS_COMMAND macro
2019-07-19 16:11:13 -07:00
b9b9ef227f
Turn off bitbanging on Hallowing to save code space.
2019-07-19 16:10:33 -07:00
cdfc169ab6
Correct typo in line meant to turn off frequencyio on M0 which saves 2k code space.
2019-07-19 16:10:32 -07:00
6797ec6ed3
Add support for grayscale displays that are < 8 bit depth.
...
This also improves Palette so it stores the original RGB888 colors.
Lastly, it adds I2CDisplay as a display bus to talk over I2C. Particularly
useful for the SSD1306.
Fixes #1828 . Fixes #1956
2019-07-19 16:06:11 -07:00
582acdaa0a
Requested changes.
2019-07-09 16:12:24 -04:00
d905958db1
Adding PyRuler to CircuitPython.
2019-07-09 16:02:39 -04:00
f0cf9a4e75
Merge pull request #1988 from jandjstudios/datum
...
Add support for boards in the datum series.
2019-07-09 09:33:13 -07:00
f4a64a2e80
Merge pull request #1989 from rce1086/master
...
Added conditional compilation around selection of TX pad candidates
2019-07-08 14:07:04 -07:00
64507207da
Added conditional compilation around selection of TX pad candidates
...
Original code was correct for SAMD21
New code for SAMD51 only permits pad-0 for TX
2019-07-08 02:08:39 +01:00
46b7575550
Initial commit to support boards in the datum series.
2019-07-06 13:41:03 -07:00
4c72a3991e
updated samd and esp8266 ports
2019-07-05 10:01:51 -07:00
55f15e3c05
Update Arch Linux ARM compiler installation instructions
...
- Add copy-pasteable Arch Linux `arm-none-eabi-gcc` install line similar to Ubuntu example
- Add `arm-none-eabi-newlib` as a required package for Arch
- Reformat Ubuntu and Arch install code-blocks to catch the eye for the impatient
Arch Linux changed their packaging for [arm-none-eabi-gcc](https://www.archlinux.org/packages/community/x86_64/arm-none-eabi-gcc/ ) by creating [arm-none-eabi-newlib](https://www.archlinux.org/packages/community/any/arm-none-eabi-newlib/ ) as an optional package. Without it users will get errors about missing header files like:
```
In file included from asf4/samd51/include/samd51j19a.h:49,
from asf4/samd51/include/sam.h:38,
from ./mpconfigport.h:31,
from ../../py/mpconfig.h:45,
from ../../py/emitnx64.c:3:
/usr/lib/gcc/arm-none-eabi/9.1.0/include/stdint.h:9:16: fatal error: stdint.h: No such file or directory
9 | # include_next <stdint.h>
| ^~~~~~~~~~
compilation terminated.
```
2019-07-04 11:14:50 -07:00
97e7fea517
Change pin names to be more descriptive
2019-07-04 13:23:57 -04:00
539502c891
Remove pin reservations. Prevents used from inside of CircuitPython code
2019-07-04 13:22:36 -04:00
e45eac5016
Switch the terminal font for ugame10
...
I designed this really tiny, minimalist font for use on very small
displays. On uGame it lets one see the whole text that CircuitPython
prints on boot. The characters are 4x6 pixels each, and they are
optimized for legibility (large x-height, right angles, blocky shapes).
It might make sense to also use that font in other boards.
2019-07-01 23:05:07 +02:00
0cce7fcaa3
Merge remote-tracking branch 'adafruit/4.0.x' into merge_in_402
2019-06-27 14:06:26 -07:00
fe507db45f
Shrink pIRkey build down.
...
Rollback HID to save string space and remove board mapping for
default buses that don't exist.
2019-06-26 16:49:23 -07:00
7ad229ec27
Merge pull request #1958 from tannewt/pygamer_advanced
...
Add PyGamer Advance and fix Joystick pins
2019-06-19 12:32:36 -07:00
5e5252ced0
Merge pull request #1955 from pewpew-game/pygamer-stage
...
Add support for PyGamer to Stage library
2019-06-18 18:23:08 -07:00
352bf7eaf5
Add PyGamer Advance and fix Joystick pins
2019-06-18 12:22:20 -07:00
5803245009
Add support for PyGamer to Stage library
2019-06-18 19:05:51 +02:00
2dddccb99e
Update board inits for new api.
2019-06-17 18:03:30 -07:00
ea2c068e11
COLMOD is 1 param, remove CASET/RASET in CircuitPython
2019-06-17 11:20:25 -04:00
207dc885a6
removed incorrect gamma code, looks better now
2019-06-14 16:34:30 -04:00
4092294e7c
tft working init. sequence, still undersaturated
2019-06-14 16:17:05 -04:00
0bc74172a2
Add pybadge airlift, sans-tft
2019-06-14 14:46:19 -04:00
0b1f605a9b
Turn off gc opt for more M0 boards
2019-06-12 13:20:21 -07:00
a91ad05774
Change to one lto partition for ultimate optimization.
2019-06-12 11:37:46 -07:00
eb21fc3e31
Add partial display update support.
...
Different operations to the display tree have different costs. Be
aware of these costs when optimizing your code.
* Changing tiles indices in a TileGrid will update an area
covering them all.
* Changing a palette will refresh every object that references it.
* Moving a TileGrid will update both where it was and where it moved to.
* Adding something to a Group will refresh each individual area it
covers.
* Removing things from a Group will refresh one area that covers all
previous locations. (Not separate areas like add.)
* Setting a new top level Group will refresh the entire display.
Only TileGrid moves are optimized for overlap. All other overlaps
cause sending of duplicate pixels.
This also adds flip_x, flip_y and transpose_xy to TileGrid. They
change the direction of the pixels but not the location.
Fixes #1169 . Fixes #1705 . Fixes #1923 .
2019-06-12 11:32:39 -07:00
ba1b36a800
Uncomment vm.c SUPEROPT (debugging typo); trim a few builds
2019-06-12 13:09:09 -04:00
1bb4fccc3b
Turn off SUPEROPT on gc.c instead of trying to squueze inline limit so much; reorganize mpconfigboard.mk files
2019-06-12 11:08:22 -04:00
0b3f29780a
shrink a bunch of builds to fit
2019-06-11 18:46:06 -04:00
4fc189b60c
Merge latest 4.0.x fixes into master
2019-06-11 16:16:29 -04:00
9c49af0597
Added pin for SD CS
2019-06-08 12:04:27 -04:00
1da8d4b4da
Add PS/2 support -- ps2io module
2019-06-04 18:05:46 -03:00
bcda5e133d
Merge pull request #1903 from tannewt/get_area
...
Rework the pixel computation to use areas
2019-05-31 21:27:06 -04:00
4e85c1ef91
Implement forced clean builds for boards so designated.
...
Mark boards that set CFLAGS_INLINE_LIMIT for particular langauges as needing clean builds.
Fixes #1910 .
2019-05-24 15:32:24 -04:00
e84f3b1c6a
make crickit cpx pinyin build fit
2019-05-23 21:22:50 -04:00
3fad7de8db
Rework the pixel computation to use areas
...
This changes the displayio pixel computation from per-pixel to
per-area. This is precursor work to updating portions of the screen
(#1169 ). It should provide mild speedups because bounds checks are
done once per area rather than once per pixel. Filling by area also
allows TileGrid to maintain a row-associative fill pattern even when
the display's refresh is orthogonal to it.
2019-05-21 17:41:06 -07:00
0199d9810b
Make pinyin fit on cpx
2019-05-21 15:18:56 -04:00
008bbc944c
correct USB PIDs for several boards
2019-05-16 10:54:15 -04:00
f3ab820fc2
Merge pull request #1884 from CapableRobot/capablerobot-usbhub
...
Added board definition for Capable Robot Programmable USB Hub
2019-05-14 13:42:51 -07:00
a0497553fc
Fix to prevent critical pins from being reset when MCU restarts or enters REPL
2019-05-14 15:23:33 -04:00
420dbafa9d
Added board definition for Capable Robot Programmable USB Hub
2019-05-14 13:28:24 -04:00
9f082ba5cb
Fix pin lost
2019-05-13 10:18:53 -05:00
36e2faf8d2
Merge pull request #1873 from ElectronicCats/escornabot_makech
...
Add Escornabot Makech of Electronic Cats
2019-05-10 12:39:58 -07:00
d174ce8821
Update pins define
2019-05-10 13:34:02 -05:00
67007282c9
Tighten down inlining on the pIRkey
2019-05-10 11:19:27 -07:00
80a752da87
Merge latest adafruit/master in.
2019-05-10 10:09:56 -07:00
27ea1df710
Init escornabot
2019-05-08 15:48:17 -05:00
9ba8191a04
Merge pull request #1855 from dhalbert/frequencyin-no-double-arith
...
avoid double float arithmetic in FrequencyIn
2019-05-08 14:40:18 -04:00
08a170388d
fix VID and PID inverted
2019-05-08 10:09:49 -05:00
f59dadbb4f
avoid double float arithmetic in FrequencyIn
2019-05-07 00:25:22 -04:00
ed8e6e8f45
re-add i2s (its J not G!)
2019-04-29 20:30:53 -04:00
fa3a52bc1e
similar to pybadge, has pin defs for joystick - comes up with filesys and display so good enough to start hacking :)
2019-04-29 20:29:48 -04:00
aa3c28787c
removed problem libraries from frozen build.
2019-04-28 00:09:13 +10:00
b4a70daf17
updated lots
2019-04-27 22:35:12 +10:00
cd4aaa13a3
added robohatmm1 board defs.
2019-04-25 21:13:41 +10:00
9b593cd154
update periph submodule
2019-04-23 18:20:13 -04:00
a5697470e1
fix up pybadge for final release board (swap backlite and reset)
2019-04-23 16:43:20 -04:00
f548305c07
Merge pull request #1815 from dhalbert/stop-flicker
...
Turn off auto_brightness if brightness is set
2019-04-18 15:48:39 -07:00
0113e0970e
add Display.__init__() args for brightness and auto_brightness
2019-04-18 15:59:16 -04:00
f7c7904e2b
Correct call structure for throwing errors
2019-04-17 13:54:29 -07:00
71c4f100de
Update translations and use same error for PDM too
2019-04-17 11:28:43 -07:00
5865b28592
[audiobusio-I2SOut] Fix translation error
2019-04-17 11:12:38 -07:00
65cc366280
[audiobusio-I2SOut] Fix compilation error by using mp_raise_ValueError_varg
2019-04-17 11:12:38 -07:00
9f63125345
Fix I2SOut message, fix #1765
2019-04-17 11:12:38 -07:00
6684a3c723
Merge pull request #1778 from pewpew-game/gamepad-shift
...
Add GamePadShift for handling shift-register-based buttons
2019-04-17 10:22:24 -04:00
2fa1bf4351
Merge remote-tracking branch 'adafruit/master' into gamepadshift
2019-04-16 11:23:41 -07:00
55782901d0
Actually call gamepadshift_tick
2019-04-16 11:15:42 -07:00
f58446e937
Merge branch 'master' into master
2019-04-16 10:32:38 -07:00
0e03a321e4
Fully split gamepadshift from gamepad
2019-04-16 10:11:54 -07:00
2d303213ed
Add files via upload
2019-04-16 16:50:54 +02:00
4f5a7ffe46
Updates: VID&PID, pinout
...
Changed VID & PID to new ones.
Changed the layout accordingly to the prototype version.
2019-04-16 16:45:47 +02:00
c927e6b938
Split GamePadShift from GamePad to save space on most boards.
2019-04-15 15:40:06 -07:00
22889ca29a
Merge pull request #1790 from pewpew-game/pybadge-stage
...
Enable _stage module and freeze stage library on the PyBadge
2019-04-15 14:25:50 -07:00
ade6bd8185
Enable _stage module and freeze stage library on the PyBadge
2019-04-15 14:38:02 +02:00
5135ee52d9
Changing to support for CP32-M4 wrover
2019-04-14 19:45:44 -07:00
eeef5359f9
Merge branch 'master' into gamepad-shift
2019-04-13 11:54:25 +02:00
f8473f4a39
Merge pull request #1788 from tannewt/pinyin
...
Add Chinese (Pinyin) and slim down boards so it fits
2019-04-12 20:36:59 -04:00
defc6dceb0
Slim down feather m0 express
2019-04-12 16:18:08 -07:00
796fc3f5ab
Update font location and shrink a bunch of builds
2019-04-12 15:25:48 -07:00
c064deaaf5
Merge pull request #1785 from pewpew-game/ugame-displayio
...
Enable displayio for the ugame10 board
2019-04-12 13:26:51 -07:00
7161038d6b
Turn off `displayio` because it is a satellite
2019-04-12 11:54:32 -07:00
0599286e32
Use never_reset in ugame10
2019-04-12 20:45:52 +02:00
947662415c
Disable gamepad for feather_m0_express_crickit
2019-04-12 20:43:29 +02:00
41499ac315
No I2S on G19
2019-04-12 10:06:17 -07:00
e85b6fb83c
adding kicksat-sprite board
...
See https://github.com/RoboticExplorationLab/sprite for details
2019-04-12 10:06:17 -07:00
dabbded622
Got back to using Display object in the Stage library
2019-04-12 11:19:19 +02:00
c3136f4f32
Enable displayio for uGame10 board
...
Also, make the _stage library work with the fourwire bus, to re-use the
display.
2019-04-12 01:10:57 +02:00
5603d0cd38
Configure the TFT spi to 24MHz by default
...
That is (slightly) out of spec for the display, but it works reliably.
2019-04-11 15:47:26 +02:00
9f4f689879
Free up space in Itsy Bitsy M0 by limiting inline.
2019-04-10 14:09:14 -07:00
894c1e9590
Rev D/E (beta) hardware!
2019-04-10 08:37:20 -04:00
203d795bd6
Merge pull request #1772 from tannewt/fix_gc_never_free
...
Check that a never free pointer is on the heap.
2019-04-10 08:26:37 -04:00
44e32506ed
Don't make Pins for those not connected on Itsy M0
2019-04-10 00:06:59 -07:00
c0c809ad4b
Fix version skew for bast_pro_mini build
2019-04-09 22:52:53 -04:00
ac2fd2fa80
Merge pull request #1773 from dhalbert/no-recursive-background-tasks
...
Don't let a background task call run_background_tasks()
2019-04-09 18:39:28 -07:00
d8763debf5
shrink sparkfun_lumidrive build
2019-04-09 21:23:28 -04:00
fc9cb038c4
Merge pull request #1715 from ElectronicCats/master
...
Added Bast Pro Mini M0
2019-04-09 20:53:05 -04:00
d633928a16
Don't let a background task call run_background_tasks()
2019-04-09 20:23:01 -04:00
129e725599
Merge branch 'master' into master
2019-04-09 14:40:36 -07:00
0e98eeb63b
Turn off touchio on pIRkey and add back usb midi.
...
USB MIDI was still being compiled in mostly anyway. There is no
place to touch on the board so touchio is useless.
2019-04-09 12:36:14 -07:00
ef23ffe584
Turn off audiobusio on Hallowing to free rom
...
It is about 5kb and the pins aren't broken out for it anyway.
2019-04-09 12:01:00 -07:00
de48e4b262
Merge remote-tracking branch 'adafruit/master' into fix_cpx_display
2019-04-08 17:15:08 -07:00
0f003ac5b8
Reorganize board busses into shared-bindings and shared-module.
2019-04-08 16:58:50 -07:00
8323721232
Stop hard-coding SPI frequency in FourWire
...
Instead remember and use the frequency, polarity and phase that was
set when the bus was first created.
2019-04-06 15:15:29 +02:00
7686f93ef4
Fix crash when getting board.SPI outside the VM
...
If one of the default pins was already in use it would crash.
The internal API has been refined to allow us to get the value
without causing an init of the singleton.
Fixes #1753
2019-04-05 19:06:37 -07:00
36b10104d6
Adjusted inline limit to fix Hallowing PL build
2019-04-05 12:17:16 -07:00
7872a33f8b
Merge branch 'master' of https://github.com/adafruit/circuitpython into ssd1331
2019-04-05 11:10:02 -07:00
50d72ed993
shrink sparkfun_lumidrive to make room for large translations
2019-04-05 11:23:47 -04:00
af3d809980
Updated boards files with displays
2019-04-04 23:18:15 -07:00
b5bc8b3fc2
Merge pull request #1745 from dhalbert/rotaryio-typo-eic-refactor
...
ROTARYIO_MODULE typo; EIC interrupt handler refactor
2019-04-04 23:53:46 -04:00
682e83a63c
Turn off rotaryio on pewpew10 so de_DE will fit
2019-04-04 20:28:32 -04:00
29df5930dd
#if EIC handlers; turn off rotaryio in pirkey for space reasons
2019-04-04 16:48:38 -04:00
2528b67e77
update samd-peripherals
2019-04-04 16:36:14 -04:00
cdd77b5972
remove CPy-specific EIC handlers from samd-peripherals
2019-04-04 16:04:11 -04:00
ceb6f2e4fc
Rework flash flush so it preserves the cache
...
This should make filesystem writes quicker and cause less heap
churn.
2019-04-03 18:28:27 -07:00
19c6b8aa0c
Merge branch 'master' into master
2019-04-02 23:15:56 -06:00
709de9ce9f
Merge pull request #1732 from ladyada/master
...
add airlift lite - samd51j19 + 2MB QSPI
2019-04-02 17:11:59 -04:00
10e35f30f0
shrink inline-limit to allow large Hallowing translation to fit
2019-04-01 12:18:25 -04:00
8159272a8b
remove old comment
2019-03-31 23:17:19 -04:00
89cf60eac3
add airlift lite - samd51j19 + 2MB QSPI
2019-03-31 19:20:15 -04:00
bb7bb80b4a
update bast pro mini m0
2019-03-30 15:28:23 -06:00
8087cb41e5
Merge branch 'master' of https://github.com/adafruit/circuitpython into ssd1351-fix
2019-03-27 20:18:37 -07:00
f118aef283
copy/paste error
2019-03-27 18:19:39 -04:00
88068876ed
turn off frequencyio for all SAMD21 builds
2019-03-27 17:54:36 -04:00
df79e9a732
Merge pull request #1687 from jrcutler/master
...
Enable nvm storage for all samd21x18 boards
2019-03-27 11:10:22 -04:00
f4cede4747
Removed parameter so CS is always toggled
2019-03-26 18:46:13 -07:00
b2ad16f5c8
Removed parameter so CS is always toggled
2019-03-26 18:34:07 -07:00
5f0e71ccb4
Merge branch 'master' of https://github.com/adafruit/circuitpython into ssd1351-fix
2019-03-26 18:23:02 -07:00
0df40534f3
Merge branch 'master' of https://github.com/adafruit/circuitpython
2019-03-26 18:22:30 -07:00
2c93ce5a28
Merge pull request #1672 from dhalbert/regular-fs-flush
...
flush flash filesystem once a second
2019-03-26 13:47:43 -07:00
74c5705a9a
Update mpconfigboard.mk
2019-03-25 17:19:40 +01:00
994f292b3b
Rename ports/atmel-samd/boards/uChip/pins.c to ports/atmel-samd/boards/uchip/pins.c
2019-03-25 15:59:22 +01:00
5ed11ddfc3
Rename ports/atmel-samd/boards/uChip/mpconfigboard.mk to ports/atmel-samd/boards/uchip/mpconfigboard.mk
2019-03-25 15:59:00 +01:00
dfc5602fa0
Rename ports/atmel-samd/boards/uChip/mpconfigboard.h to ports/atmel-samd/boards/uchip/mpconfigboard.h
2019-03-25 15:58:37 +01:00
af04307c83
Rename ports/atmel-samd/boards/uChip/board.c to ports/atmel-samd/boards/uchip/board.c
2019-03-25 15:57:35 +01:00
4886451000
Add files via upload
...
This is a pull request to add support for uChip into the Circuitpython environment.
We tested the uploaded code and it seems to work with Circuitpython.
If there are any suggestions or changes needed, please let us know!
What is uChip in brief?
A complete USB dev board the size of a narrow 16-DIP package, featuring Atmel SAMD21 Cortex M0+ and onboard switching converters. (OTG compliant and power delivery up to 1A@5V or 3V3).
For more details refer to the ongoing campaign on kickstarter.
www.kickstarter.com/projects/1186620431/uchip-arduino-zero-compatible-in-a-narrow-dip-16-p
2019-03-25 13:06:31 +01:00
c3329e224d
Added Single Byte Boundaries option for certain displays
2019-03-24 23:59:28 -07:00
41f4f269f1
Disable frequencyio support for samd21-based catwan_usbstick target.
2019-03-24 14:22:23 -04:00
d6c7bda6d1
Enable 256b of nvm storage for all samd21x18-bootloader.ld boards.
2019-03-24 12:02:07 -04:00
0c33f7fdb4
Enable CS toggle for displayio by default
2019-03-23 20:23:23 -07:00
d2a0ec28a0
Fixed display init on boards with displays
2019-03-23 19:32:15 -07:00
eca23a7279
remove i2cslave from feather m0 crickit
2019-03-20 15:38:52 -04:00
fbf166af1a
enable MICROPY_CPYTHON_COMPAT for most builds except CIRCUITPY_SMALL_BUILD; remove a few other things to make fit
2019-03-20 14:36:24 -04:00
2459eabd66
flush flash filesystem once a second
2019-03-20 12:21:36 -04:00
a50ee4f650
Add frozen stage module to ugame10 board
...
And also ignore some more pins.
This is needed for the builds on the circuitpython.org to be functional.
2019-03-17 14:03:50 +01:00
ff7e729032
Fix custom pin in use logic for SWD
...
This should allow you to use SWD pins unless a debugger is attached.
You may have trouble connecting to SWD when CircuitPython has already
begun using them.
Fixes #1633
2019-03-14 11:11:35 -07:00
e05ab64398
Squeeze down the feather crickit build
2019-03-13 17:20:18 -07:00
494a9d3825
Merge pull request #1640 from tannewt/final_displayio_changes
...
Final displayio changes before 4.0.0
2019-03-13 18:24:04 -04:00
97140e6a62
wrong arg type for PWMOut variable_frequency
2019-03-12 21:28:30 -04:00
96a924f5f0
Turn off networking on M0s.
...
It takes 10k of code space and isn't very useful because of the
M0's limited RAM. Disabling it allows us to add other things.
2019-03-12 17:18:30 -07:00
2e500a8a29
Copy inline setting on feather m0 express that the metro has.
2019-03-12 14:06:01 -07:00
b1c572e82e
Fixup the pybadge definition so the screen works.
2019-03-12 11:18:29 -07:00
37e10d4a81
Be more careful when initing the board outside the VM.
2019-03-12 11:18:29 -07:00
ef4a74e201
Add basic Pybadge board definition
...
Currently boots on board and can connect to REPL,
but does not appear as mountable drive in OS.
Starting REPL gives the following error message:
```
You are running in safe mode which means something unanticipated happened.
Looks like our core CircuitPython code crashed hard. Whoops!
Please file an issue at https://github.com/adafruit/circuitpython/issues
with the contents of your CIRCUITPY drive and this message:
Crash into the HardFault_Handler.
```
2019-03-12 11:12:35 -07:00
8f57606513
Merge pull request #1635 from caternuson/iss1634_SPEAKER
...
add SPEAKER pin alias for PyPortal
2019-03-11 19:16:01 -07:00
46fc8a8a86
change order so SPEAKER is first
2019-03-11 17:45:27 -07:00
53b7055283
add SPEAKER pin alias for PyPortal
2019-03-11 15:12:29 -07:00
caf51cf4eb
Add default devices and tweak brightness in boards/pewpew10
2019-03-11 19:09:21 +01:00
26ed411936
Shrink build so de_DE fits
2019-03-07 07:47:18 -05:00
b7b74d1f78
update translations
2019-03-02 18:17:58 -06:00
b2520f3147
using the correct name for things is important...
2019-03-02 16:17:23 -06:00
c9eb02d9d2
shore-up inclusion
2019-03-02 10:05:32 -06:00
2cd6a79016
better handle frequencyio inclusion
2019-03-01 22:46:57 -06:00
438eadd63a
re-add frequencyin to 'timer_handler' after upstream merge
2019-03-01 21:47:23 -06:00
a44bfc2730
Merge branch 'master' of https://github.com/adafruit/circuitpython into new_freq_in
2019-03-01 21:24:30 -06:00
17bf2afa41
Merge pull request #1607 from pewpew-game/pewpew10.x-4.x
...
Add support for PewPew 10.x boards
2019-03-01 14:07:32 -05:00
263134dcd3
Add more guards for CIRCUITPYTHON_PEW
2019-03-01 18:50:00 +01:00
7535326d38
Merge pull request #1605 from dhalbert/pwmout-tcc-lock-ccb
...
Use TCC LUPD lock when updating CCB
2019-03-01 12:03:38 -05:00
2bfafd1fc9
Enable math for pewpew10
2019-03-01 16:55:54 +01:00
5d85d54026
Move the frozen pew.py into a submodule
2019-03-01 16:24:22 +01:00
89b2788d11
Apply review fixes:
...
* fix formatting
* fix copyrights
* fix CIRCUITPYTHON_GAMEPAD guards
* add CIRCUITPYTHON_PEW guards to reset
* fix module list order
2019-03-01 16:05:15 +01:00
3826ca4194
Rename internal pins to add underscore in front
2019-03-01 15:10:43 +01:00
f5f4932220
Clean unused include from tick.c
2019-03-01 15:09:00 +01:00
18870255ea
Remove the pewpew70 board definition, leave only pewpew10
2019-03-01 15:06:24 +01:00
fb027f2024
Update PyPortal pins to rev C
2019-03-01 09:06:03 -05:00
45fea86554
Rebase on top of CircuitPython 4.x
2019-03-01 14:59:21 +01:00
3c24e893e9
Fix SYNCBUSY loop typo.
2019-02-28 23:38:26 -05:00
808304e827
Use TCC LUPD lock when updating CCB
2019-02-28 19:53:35 -05:00
59f63eaef6
Handle new buttons
2019-02-28 23:34:03 +01:00
0a5c1c9402
Some cleanup
2019-02-28 23:34:03 +01:00
55b511a5d8
Use a dedicated timer
2019-02-28 23:33:37 +01:00
88e40193ae
Add a _pew module
2019-02-28 23:32:58 +01:00
7ac11ed8e1
Enlarge the usb disk
2019-02-28 23:25:18 +01:00
5a1e69f5b8
Correct a typo in the pin name
2019-02-28 23:23:26 +01:00
a41ea27596
Add pewpew70 board
2019-02-28 23:23:26 +01:00
4d47ce5c60
fixes set_timer_handler call
2019-02-27 19:28:59 -06:00
9d20380bd4
Merge branch 'master' into new_freq_in
2019-02-26 04:29:16 +00:00
4a9f05a44f
final re-glue; compiles now.
2019-02-25 21:22:52 -06:00
a8204f1bf9
touchup adding frequencyin interrupt handling
2019-02-24 18:07:55 -06:00
f602fa3d9f
fix init deps
2019-02-24 18:07:26 -06:00
3afcd3f5bc
another/different size tweak for the DE hallowing build
2019-02-23 20:18:22 -08:00
2cb31ea546
Merge branch 'master' into bmp_bitdepths
2019-02-23 20:16:57 -08:00
3843e96edc
Tweaking German hallowing build for size
2019-02-23 19:47:58 -08:00
85421f9766
final pin names, tested with final release
2019-02-23 15:40:28 -05:00
2437ab9605
update frequencyin interrupt handler
2019-02-22 17:19:09 -06:00
a1060747f8
Merge branch 'new_master' into new_freq_in
2019-02-22 23:12:11 +00:00
af863a3780
Merge pull request #1586 from sommersoft/shared_timer_handler
...
Move shared_timer_handler
2019-02-22 11:04:27 -08:00
a3f387274f
fix build issues
2019-02-21 20:46:42 -06:00
7a7f6638d2
update peripherals submodule
2019-02-21 18:44:51 -06:00
f3e50b9df2
Merge pull request #1581 from dhalbert/ble-drv-root-pointer
...
Use critical section, not lock, in CharacteristicBuffer; use a root pointer for ble_drv list
2019-02-21 12:28:41 -05:00
99da3b9646
Use critical section, not lock, in CharacteristicBuffer; use a root pointer for ble_drv list
2019-02-21 00:19:31 -05:00
55e7c5a41b
handle 'set_timer_handler' on this side, vs samd-periphs.
2019-02-19 20:18:21 -06:00
0dc2600587
Merge pull request #1552 from tannewt/onsdbitmap
...
Fix displaying images off of SD cards.
2019-02-19 19:28:53 -05:00
3e24b9668e
Merge pull request #1573 from dhalbert/reset-analogout
...
Fix #ifdefs in port.c to call xxx_reset() routines properly. Remove most uses of EXPRESS_BOARD.
2019-02-19 16:14:33 -08:00
53fa65e318
Speed up pyportal by writing memory on the same access as our rotation.
2019-02-19 14:51:39 -08:00
4e75aaecd0
Merge pull request #1569 from TG-Techie/patch-7
...
PYPORTAL:make it easier for people to hookup in spi mode
2019-02-19 14:12:30 -05:00
9c24c804fb
Fix #ifdefs in port.c to call xxx_reset() rroutines properly. Remove most uses of EXPRESS_BOARD.
2019-02-18 22:44:31 -05:00
d453b605d3
make it easier for people to hookup in spi mode without looking inspecting schematic
2019-02-18 15:00:14 -05:00
339a22752b
Remove rtc from pirkey_m0 to make TRANSLATION=fr fit
2019-02-18 09:02:26 -05:00
97aeb1953b
correct weak module links; samd module only in m4 ports; update libraries
2019-02-17 23:48:08 -05:00
dafc370d22
moves 'shared_timer_handler' back to atmel-samd from samd-peripherals
2019-02-16 19:54:16 -06:00
ea9200a042
starting again; initial addition of 'frequencyio.FrequencyIn'
2019-02-16 19:26:24 -06:00
7b3f7605b8
address @tannewt changes: move and rename common files; remove PORT_HEAP_SIZE
2019-02-15 20:32:32 -05:00
a345ef28f2
finish Makefile refactoring; nrf builds work
2019-02-15 18:55:10 -05:00
cf545cd477
WIP: fix issues with remaining atmel-samd builds
2019-02-15 09:52:45 -05:00
5154e0581e
WIP: atmel-samd trinket build works
2019-02-15 00:28:20 -05:00
f99b9ddcf1
Merge pull request #1546 from tannewt/fix_safe_mode
...
A safe mode fix and displayio fixes
2019-02-13 21:15:14 -05:00
d6cbd5be92
Merge pull request #1540 from TG-Techie/patch-6
...
PYPORTAL: pindefs incorrect
2019-02-13 17:21:22 -08:00
473bdf48f6
A safe mode fix and displayio fixes
...
* Fixes safe mode on the SAMD51. The "preserved" value was being
clobbered by the bootloader.
* Fixes auto-reload loop when in safe mode.
* Fixes reading Group children with [].
* Check that a TileGrid actually moves before queueing a refresh.
2019-02-13 15:31:06 -08:00
da5008f4d8
Fix atmel UART after ASF4 pruning.
2019-02-13 11:42:09 -05:00
e901317fd7
PYPORTAL: pindefs incorrect
...
@jerryneedell suggested the pins could be wrong when I told him I was getting reading that didn't change, having corrected the pinout to match the schematic I was given it now works!
used:
```
ts = adafruit_touchscreen.Touchscreen(board.TOUCH_XL, board.TOUCH_XR,
board.TOUCH_YD, board.TOUCH_YU,
calibration=((5200, 59000), (5800, 57000)),
size=(320, 240))
while True:
p = ts.touch_point
if p:
time.sleep(.5)
print(p)
```
2019-02-12 22:18:36 -05:00
70f40a03cb
Rotate pyportal screen to be correct
2019-02-12 13:53:27 -08:00
b4306314aa
Move terminal font to terminalio from board.
2019-02-12 10:10:02 -08:00
c17f147be9
A variety of displayio improvements
...
This changes a number of things in displayio:
* Introduces BuiltinFont and Glyph so the built in font can be used by libraries. For boards with
a font it is available as board.TERMINAL_FONT. Fixes #1172
* Remove _load_row from Bitmap in favor of bitmap[] access. Index can be x/y tuple or overall index. Fixes #1191
* Add width and height properties to Bitmap.
* Add insert and [] access to Group. Fixes #1518
* Add index param to pop on Group.
* Terminal no longer takes unicode character info. It takes a BuiltinFont instead.
* Fix Terminal's handling of [###D vt100 commands used when up arrowing into repl history.
* Add x and y positions to Group plus scale as well.
* Add bitmap accessor for BuiltinFont
2019-02-11 20:55:05 -08:00
1a6ad20943
Get space back by using less ASF4 and combining register writes
2019-02-11 17:36:34 -08:00
2e48739a4e
standardizing on "BATTERY" pin; and load-leveling Travis
2019-02-06 10:50:57 -08:00
4c1b85cdcd
elaborating on include path for board_busses
2019-02-05 20:21:54 -08:00
30fcb14017
correcting VID/PID and adding sam32 to travis
2019-02-05 19:20:43 -08:00
a2936c4c20
adding SAM32 board
...
SAMD51 running circuitpython talking to an ESP32 running micropython.
Full board details at: https://github.com/maholli/SAM32
2019-02-05 17:22:34 -08:00
844c20106b
Turn off `micropython.mem_info` on SAMD to get ~1k back
2019-02-04 18:00:18 -08:00
90e5964703
Set auto brightness on by default for boards with displays built in.
2019-02-03 13:42:03 -08:00
03068a9388
Fix built-in inits and terminal allocate
2019-02-01 01:00:10 -08:00
ec03887040
Fix hallowing and nrf builds
2019-01-31 11:42:15 -08:00
601a910f4e
More improvements to Terminal:
...
* Fix Hallowing.
* Fix builds without displayio.
* Fix y bounds that appears as untrollable row of pixels.
* Add scrolling to TileGrid.
* Remove Sprite to save space. TileGrid is a drop in replacement.
2019-01-31 11:42:14 -08:00
69bc5e189b
Rudamentary backlight support
2019-01-31 11:42:14 -08:00
1a1dbef992
Hook up the terminal based on the first display.
2019-01-31 11:42:14 -08:00
fb0970ec6e
Add terminalio
2019-01-31 11:42:13 -08:00
73cf490635
Add TileGrid
2019-01-31 11:42:13 -08:00
39240516f3
Correct pin capitalization
2019-01-31 09:11:30 -08:00
3225878f63
for redboard turbo too
2019-01-30 22:55:36 -08:00
fe2a092f1c
Fix board_bus location
2019-01-30 22:54:26 -08:00
b124071e10
Removes a lot of left over comments, adds lumidrive and redboard turbo to travis.yml
2019-01-30 16:13:08 -07:00
178cfc1623
Adds make config files for SparkFun LumiDrive and Redboard Turbo
2019-01-30 13:50:29 -07:00
07b96fa15d
Merge pull request #1495 from TG-Techie/patch-3
...
fixed compiling error for datalore ip m4
2019-01-27 14:07:16 -08:00
de2861969b
Merge pull request #1494 from TG-Techie/patch-2
...
add displayio to TG-Techie's first board
2019-01-27 14:06:47 -08:00
dd5165c92c
Added support for SparkFun SAMD21 Dev
2019-01-25 12:27:31 -06:00
468faf4e2b
fixed compiling error
2019-01-25 12:42:43 -05:00
65dc8d0c74
Updated .travis.yml and samd README with SparkFun SAMD21 Dev pinout
2019-01-25 11:08:19 -06:00
e9538dbc7f
add displayio to TG-Techie's first board
2019-01-25 12:06:05 -05:00
d79615f96b
Revert "Updated samd readme with SparkFun SAMD21 Dev pinout"
...
This reverts commit d10fa4a8cb
2019-01-25 11:02:22 -06:00
d10fa4a8cb
Updated samd readme with SparkFun SAMD21 Dev pinout
2019-01-25 10:14:53 -06:00
aaa644b223
Skip displayio on crickit builds and cpx build due to lack of space.
2019-01-22 18:49:37 -08:00
0cdbc004e6
Enable displayio on all Express boards.
2019-01-22 17:59:31 -08:00
f43379c771
No pixelbuf on Hallowing
2019-01-22 14:38:34 -08:00
a380865655
Merge remote-tracking branch 'adafruit/master' into HEAD
2019-01-22 14:02:07 -08:00
50af08a6f3
Merge branch 'master' into pixelbuf
2019-01-19 16:33:59 -05:00
edc8383e22
Improvements thanks to danh's review
2019-01-18 16:37:06 -08:00
ae52c964c2
Cleanup display rework for PR.
...
Fixes #1465 . Fixes #1337 . Fixes #1168
2019-01-18 13:47:40 -08:00
41dad1ea1e
Fix pin defs
2019-01-18 11:43:35 -08:00
96e2c717fc
Fix build
2019-01-17 22:10:11 -08:00
6404aaf411
Fix up nrf and using board.SPI in FourWire
2019-01-17 18:19:07 -08:00
760bd8d8a4
share fourwire and make nrf compile
2019-01-17 15:15:59 -08:00
2d136d58bf
Fix other builds and hallowing
2019-01-17 14:45:29 -08:00
5277138c99
pyportal compiles and tweak blinka colors
2019-01-17 10:57:05 -08:00
84292ad890
External fourwire works and blinka splash after
2019-01-17 00:20:16 -08:00
05d8885a1a
Rework displays in prep for dynamic support and 8bit parallel.
2019-01-16 12:05:20 -08:00
19b6c5c802
more pins!
2019-01-16 01:49:12 -05:00
c1dfee6575
Merge pull request #1466 from TG-Techie/patch-1
...
Update DLIPM4 mpconfigboard.mk
2019-01-15 18:40:46 -08:00
a14762a16c
Add support for rendering a shape.
...
Fixes #1171
2019-01-14 17:29:15 -08:00
f667d4d887
Update mpconfigboard.mk
...
oops, forgot to change those when i copied the folder
2019-01-14 14:43:34 -05:00
ffe734edf7
Fresh combined checkin of _pixelbuf library.
2019-01-13 23:51:13 -05:00
ef6c9e7df6
removed commented code
2019-01-12 23:19:40 -05:00
309a02efa1
added datalore ip m4 to boards
2019-01-12 23:06:12 -05:00
5f9980fb6b
support winbond 8MB chips on all boards that might use them
2019-01-12 13:24:35 -05:00
6eecf96710
Use correct SERCOM for SDA/SCL on Grand Central
2019-01-11 19:06:46 -05:00
62a8cc2825
Merge pull request #1453 from tannewt/text_on_pyportal
...
Enable the display on pyportal
2019-01-11 10:33:16 -08:00
b2cec6275c
Fix screen rotation and reset pin
2019-01-11 00:10:41 -08:00
50ee5ef24c
merge translations; add bleio comments; fix minor sphinx issues in midi
2019-01-10 21:12:17 -05:00
19db886645
Support the display on the pyportal.
...
Also fix #1390 , reload during sleep broken.
2019-01-10 17:29:34 -08:00
516d7da641
Merge pull request #1449 from tannewt/midi
...
Add USB MIDI support for SAMD and nRF.
2019-01-10 19:49:33 -05:00
bbf77a7efb
Merge branch 'master' into master
2019-01-10 12:50:05 -06:00
5c15a19c32
Added SparkFun SAMD21 Mini port
2019-01-09 16:12:43 -06:00
b5e40f52c2
Add USB MIDI support for SAMD and nRF.
...
The API should be identical to using a UART for MIDI.
Fixes #672
2019-01-09 14:02:11 -08:00
0599fbf7d8
Merge remote-tracking branch 'adafruit/master' into bleio-rev
2019-01-08 16:40:12 -05:00
a00420bafd
Added pinout for SparkFun SAMD21 Mini Breakout on README.
2019-01-07 17:26:38 -06:00
d3aeca104e
Initial pass at pyportal board define.
2019-01-07 14:56:54 -08:00
180c7b4b79
Trying iframe in rst again^3.
2019-01-07 16:35:47 -06:00
4d3ae04e2b
Trying iframe in rst again again.
2019-01-07 16:31:52 -06:00
04b9a789ff
Trying iframe in rst again.
2019-01-07 16:28:14 -06:00
2df3e7b0fc
Updated README with embedded spreadsheet
2019-01-07 16:25:34 -06:00
4167bf5b24
wip: advertising works, but not connection
2018-12-27 00:04:04 -05:00
a9f0b31a15
Update README.rst
...
https://github.com/adafruit/circuitpython/issues/1410
2018-12-19 13:25:18 -05:00
69bb4ae670
Merge pull request #1397 from ShawnHymel/master
...
Added board support for Arduino MKR Zero
2018-12-11 13:09:27 -08:00
29f9794dcf
Curly brace change to make it more consistent
...
And to queue Travis
2018-12-11 11:57:52 -08:00
f8ded46ad6
Merged field in pin table in README.
2018-12-08 17:42:42 -06:00
4c81d9a9ac
Added SD_CD pin definition
2018-12-08 17:40:46 -06:00
801d9a5abc
Fix running the USB task on nRF.
...
It wasn't being run due to a rework done only on the atmel-samd port.
The rework itself isn't needed now that the heap check triggers safe
mode instead of throwing a Python exception. So, I've removed the
rework.
2018-12-07 16:11:21 -08:00
6ef8639971
Rework safe mode and have heap overwrite trigger it.
...
This creates a common safe mode mechanic that ports can share.
As a result, the nRF52 now has safe mode support as well.
The common safe mode adds a 700ms delay at startup where a reset
during that window will cause a reset into safe mode. This window
is designated by a yellow status pixel and flashing the single led
three times.
A couple NeoPixel fixes are included for the nRF52 as well.
Fixes #1034 . Fixes #990 . Fixes #615 .
2018-12-06 14:24:20 -08:00
7ad2e6ace3
Add stack validity check and raise an error when it happens.
...
The backtrace cannot be given because it relies on the validity
of the qstr data structures on the heap which may have been
corrupted.
In fact, it still can crash hard when the bytecode itself is
overwritten. To fix, we'd need a way to skip gathering the
backtrace completely.
This also increases the default stack size on M4s so it can
accomodate the stack needed by ASF4s nvm API.
2018-12-04 23:26:04 -08:00
f59c3bd726
Add flag comment
2018-12-04 18:22:23 -08:00
3f5d917b39
Update submodules to merge commits
2018-12-04 18:20:51 -08:00
15c1fc873c
Add particle boards, fix cp32 and try to speed up atmel build
2018-12-04 18:20:48 -08:00
63cd9209f1
allow KeyboardInterrupt on UART read; fix nrf UART pin claiming; rename feather 52840 UART pins
2018-12-04 15:05:39 -05:00
7f6da78be3
Merge pull request #1344 from bwshockley/master
...
Add Mini SAM M4 board.
2018-12-03 17:37:23 -05:00
80db2cec99
UART changes: timeout in secs, write bytes, etc.
2018-12-03 12:04:32 -05:00
3d597aae92
Added MKR Zero board definition.
2018-12-02 18:07:19 -06:00
9aebe2f1ef
Merge branch 'master' into master
2018-11-30 20:49:55 -08:00
c55183f71a
Merge remote-tracking branch 'adafruit/master' into gc_rev_b
2018-11-30 15:09:15 -08:00
48928d4b25
Auto build and a couple pin fixes
2018-11-30 15:08:06 -08:00
77760090e2
Fix up spi flash define
2018-11-30 14:55:06 -08:00
95e0309263
Merge remote-tracking branch 'adafruit/master' into mini_sam
2018-11-30 14:40:01 -08:00
c47c495aca
Merge pull request #1329 from notro/oserror_errno
...
Support OSError subclasses and attributes
2018-11-27 22:35:54 -08:00
913b513929
Merge pull request #1357 from ElectronicCats/add-electroniccats-catwan-usbstick
...
Added board Electronic Cats CatWAN USB Stick
2018-11-27 11:58:26 -08:00
60480ff4ed
Merge pull request #1351 from jepler/issue1307-ujson
...
json: enable on nrf boards and "large flash" M4 samd boards
2018-11-27 11:29:29 -08:00
1da2425612
Add Electronic Cats CatWAN USB Stick
2018-11-26 14:39:58 -06:00
324301e3bc
Update tinyusb to include control fixes.
2018-11-23 13:28:10 -08:00
78972cc879
ports/atmel-samd: enable json module on M4 boards with lots of flash
2018-11-22 10:35:44 -06:00
69eb2efced
Update devices.h
2018-11-20 13:21:43 -06:00
7d1a62e4ba
Update for Grand Central Rev B
2018-11-20 10:54:13 -08:00
c344d48840
Update devices.h
2018-11-20 12:44:12 -06:00
acb9bd7618
Cleanup for Mini SAM M4 Only
...
Remvoed older files and cleaned up repository to reflect changes for Mini SAM M4.
2018-11-16 09:46:08 -06:00
11de8fdca7
merge 3.x swap of /lib and .frozen; update frozen libs
2018-11-15 15:00:23 -05:00
87ddd64481
Factor out fake partition
2018-11-14 17:59:11 -08:00
704d0c606b
samd51: Support more uerrno errno values
...
Use the default MICROPY_PY_UERRNO_LIST to give libraries access to all the errno values.
2018-11-13 22:07:05 +01:00
f190bb2c26
Merge pull request #1332 from tannewt/clear_trellis_neopixels
...
Clear Trellis NeoPixels on board reset.
2018-11-13 15:03:25 -05:00
4ae4cc11e0
Clear Trellis NeoPixels on board reset.
...
This makes it easier to change code in cases where the pixels may
cause a brownout.
2018-11-13 11:27:18 -08:00
a3a690dc01
Add pragma to ensure neopixel_write is always -Os
2018-11-13 10:56:00 -08:00
ed9db80760
Switch SAMD51 back to -Os
...
It messes up neopixel timing otherwise.
Fixes #1326
2018-11-13 10:43:18 -08:00
355abc835e
Fix output overflow and make help translatable
2018-11-09 16:41:08 -08:00
43f7ca7985
Incorporate feedback:
...
* Clean up board defines.
* Add flush on eject and stay ejected.
* Swith back to NONE protocol for CDC.
2018-11-09 11:33:56 -08:00
688f0e388b
Update MKR1300 board definition too
2018-11-09 00:49:02 -08:00
be6b49c712
Add back internal flash header and slim it down.
2018-11-09 00:27:18 -08:00
9d91111b1b
Move atmel-samd to tinyusb and support nRF flash.
...
This started while adding USB MIDI support (and descriptor support is
in this change.) When seeing that I'd have to implement the MIDI class
logic twice, once for atmel-samd and once for nrf, I decided to refactor
the USB stack so its shared across ports. This has led to a number of
changes that remove items from the ports folder and move them into
supervisor.
Furthermore, we had external SPI flash support for nrf pending so I
factored out the connection between the usb stack and the flash API as
well. This PR also includes the QSPI support for nRF.
2018-11-08 17:25:30 -08:00
6aca9762c9
Merge pull request #1313 from siddacious/master
...
adding support for the CP32-M4
2018-11-04 11:26:14 -08:00
a15ed0b912
Fix Trellis M4 DotStar pin assignments.
2018-11-04 00:07:42 -04:00
bd4188a092
adding changes to mpconfigboard.mk to reduce memory usage on CPX per @danh
2018-11-03 14:42:27 -04:00
4f2f571536
Adding the serial_bytes_available() method to the 3.x branch
2018-11-03 14:01:30 -04:00
4dfba2f8ac
put .frozen before /lib in sys.path; update frozen libraries
2018-11-01 19:57:10 -04:00
844b674a1e
adding support for the CP32-M4
2018-11-01 09:42:48 -07:00
dc82fd556b
Updating devices.h to add new devices, fix a typo and address #1239
2018-10-31 01:54:09 -07:00
bd79c0c0de
Merge pull request #1295 from ElectronicCats/mkr1300
...
Add board MKR1300 by Arduino
2018-10-26 20:15:20 -04:00
aec39fd027
Updated to new D21G18 MCU
...
Updated MIni SAM M0 to new D21G18A MCU to match layout/design of M4
2018-10-26 12:09:59 -05:00
bbf8334166
Fix build without network code
2018-10-25 13:14:27 +11:00
f6482699a0
Merge remote-tracking branch 'origin/master' into circuitpython/nickzoic/703-wiznet-5500-native
2018-10-25 12:20:50 +11:00
dc9d338612
Merge pull request #1167 from notro/cpython_stdlib
...
Support CPython standard library
2018-10-24 12:57:41 -07:00
d882ff6328
samd51: Set stack size to 8k
...
This is necessary in order to run unittest.
Heavy tests like those in the stdlib need 12-14k.
2018-10-24 19:33:01 +02:00
1b86e5fc83
samd51: Enable functionality to support CPython stdlib
...
This enables various things in order to support the CPython standard library.
MICROPY_PY_BUILTINS_NOTIMPLEMENTED:
Support NotImplemented for easy conversion of stdlib.
It doesn't do fallbacks though, only raises TypeError.
MICROPY_PY_COLLECTIONS_ORDEREDDICT:
collections.OrderedDict
MICROPY_PY_FUNCTION_ATTRS:
Support function.__name__ for use as key in the function attribute workaround.
MICROPY_PY_IO:
uio module: BytesIO, FileIO, StringIO, TextIOWrapper
Also add 'io' alias.
MICROPY_PY_REVERSE_SPECIAL_METHODS:
Support the __r*__ special methods.
MICROPY_PY_SYS_EXC_INFO:
sys.exc_info() used by unittest when collecting exceptions.
MICROPY_CPYTHON_COMPAT:
Some of the things it adds:
>>> object.__init__
<function>
>>> object.__new__
<function>
>>> object.__class__
<class 'type'>
>>> object().__class__
<class 'object'>
>>> object.__name__
'object'
>>> 'Hello'.encode()
b'Hello'
>>> b'Hello'.decode()
'Hello'
Named tuple field names from string:
namedtuple('Point', 'x y')
2018-10-24 19:33:01 +02:00
cec9a69a15
samd51: Make errno, os, and time module aliases
...
Add alias for uerrno so the user doesn't have to know about the
CircuitPython special names for the module.
Make os and time weak modules (aliases) making it possible to add
functionality to those modules written in python.
Example:
'import os' will now look in the path for an os module and if not found
it will import the builtin module. An os module written in python will
import the builtin module through its name prefixed with an underscore
(_os) following the C module naming practice in CPython.
Also right align the macro values to increase readability making it
easier to compare the values for samd21 and samd51. Even the longest
macro from py/mpconfig.h will fit with this alignment.
2018-10-24 19:31:53 +02:00
f0d7073a12
Add Arduino MKR1300
2018-10-22 19:38:24 -05:00
5d190a5615
Update mpconfigboard.h
...
Corrected NVM size.
2018-10-19 21:18:19 -05:00
548e6893cd
Create pins.c
2018-10-19 21:16:21 -05:00
88fd5d7daa
Create mpconfigboard.mk
2018-10-19 21:15:50 -05:00
1593f4e3a8
Create mpconfigboard.h
2018-10-19 21:14:46 -05:00
6d974593c7
Create board.c
2018-10-19 20:52:23 -05:00
b436666e85
Merge pull request #1272 from sajattack/battery
...
add pin def for BAT
2018-10-17 12:15:38 -07:00
298756eef8
Merge pull request #1280 from tannewt/precondition_dac
...
Ramp values to and from a default value while active.
2018-10-17 15:00:11 -04:00
4eb1fe18e5
Tweaks from feedback:
...
* default_value is now quiescent_value
* Use step = -step format for sign switch
* Add note about analogout_reset being empty
2018-10-17 11:31:08 -07:00
c209165d43
Ramp values to and from a default value while active.
...
This reduces the popping sound on initial playback of an audio
sample.
The M4 DAC has a pop on startup that cannot be prevented. It also
does not allow readback so current values of the DAC are ignored.
Fixes #1090
2018-10-16 16:23:29 -07:00
089e2cc099
remove BATTERY from itsybitsy
2018-10-16 14:55:21 -07:00
a15f3361aa
add mechanism for timer ticks in NICs
2018-10-16 23:09:25 +11:00
c103a05579
Add board Meow Meow by Electronic Cats
...
https://github.com/ElectronicCats/MeowMeow
2018-10-15 19:17:04 -05:00
1447df3fa6
change BAT to BATTERY
2018-10-14 23:34:49 -07:00
f1028b5f96
add pin def for BAT
2018-10-13 15:53:22 -07:00
aab28748bb
Merge remote-tracking branch 'origin/master' into circuitpython/nickzoic/703-wiznet-5500-native
2018-10-11 14:19:10 +11:00
8d75c3d339
Changed to only build wiznet for {feather|metro}_m[04]_express
2018-10-11 13:42:26 +11:00
b5e26130d7
Support rev D for the Trellis M4 Express
2018-10-10 11:21:35 -07:00
df80ad8e6e
Merge pull request #1193 from ATMakersBill/master
...
Add supervisor.runtime.serial_bytes_available so that input() can be used without blocking.
2018-10-09 23:58:43 -07:00
9f94712ad1
replacing change to input() with separate method to check for USB Serial input
2018-10-09 18:37:52 -04:00
a60700b1c5
Get DHCP working ...
2018-10-09 16:28:30 +11:00
6e624b9c6a
Split wiznet.WIZNET5K off into its own file
2018-10-09 13:05:58 +11:00
2b0356c61f
Disable framebuf by default on express builds.
2018-10-05 15:19:09 -07:00
76008ce304
Introduce audioio.Mixer which can mix multiple audio samples
...
to produce a single sample.
Only works with 16 bit samples on the M4.
Fixes #987
2018-10-05 15:12:23 -07:00
091c5106ef
Cleanup Files
2018-10-04 21:26:28 -05:00
62d316bffb
W25Q16JV IQ and IM
...
Indicate the differences between IQ and IM with the 2 MiB version of the W25Q chip.
2018-10-04 21:26:05 -05:00
2ef29c2cec
Changed FLASH DEVICE
...
Changed the flash device to W25Q16JV_IM - the type actually used.
2018-10-04 21:14:07 -05:00
f6b9f101dc
Added W25Q16JV_IM
...
Added new flash module: W25Q16JV_IM
2018-10-04 21:13:05 -05:00
15b59bee1b
change initialization method + mod_network names
2018-10-04 22:31:47 +10:00
f9bda0ff93
Makefile & mpconfigport for atmel-samd with wiznet
2018-10-04 22:02:25 +10:00
3c743f2664
Update Trellis M4 Express for Rev C
2018-10-02 11:56:09 -07:00
1f3a3fe5a0
Merge remote-tracking branch 'upstream/master'
2018-10-01 12:28:42 -05:00
862d5a06fd
Create pins.c
2018-09-29 23:33:07 -05:00
8e52d922cc
Create mpconfigboard.mk
2018-09-29 23:26:15 -05:00
5ab4f09b2f
Create mpconfigboard.h
2018-09-29 23:24:32 -05:00
4acca8b90b
Update board.c
2018-09-29 23:17:24 -05:00
13364f90fe
Create board.c
2018-09-29 23:16:07 -05:00
a9d094ab74
Fix translations
2018-09-21 12:24:04 -04:00
e5274959f2
Merge remote-tracking branch 'adafruit/3.x' into merge_3x
2018-09-21 12:22:26 -04:00
3f380ded6b
Merge pull request #1197 from dhalbert/3.x-master
...
3.x master
2018-09-19 09:58:52 -07:00
8172a2ca9d
Merge pull request #1189 from arofarn/add-BATTERY-pin
...
Add VOLTAGE_MONITOR pin to feather boards pins
2018-09-18 21:47:09 -04:00
655f223916
Clock the SAMD21 much faster so it can actually convert at its max
...
sample rate of 350ksps.
Also added an error check of sample rate.
Fixes #1196
2018-09-18 15:29:46 -07:00
bc510e714f
merge 3.0.2 to master
2018-09-18 15:38:12 -04:00
aaa61d06e3
add D4 and D3 aliases for EXTERNAL_NEOPIXEL and SENSE pins to match final silkscreen
2018-09-17 22:22:23 -04:00
53853289eb
Move VOLTAGE_BATTERY line just under D9 line
2018-09-14 09:02:04 +02:00
521a14e942
add mic in / out
2018-09-13 21:50:43 -04:00
994c066b21
rev B (minus microphone)
2018-09-13 21:34:39 -04:00
bec42671b1
missin' reset pin for the radio. tested works.
2018-09-13 21:30:13 -04:00
28aabb4d5c
trellis m4 variant
2018-09-13 21:30:13 -04:00
8eda4bb473
Add VOLTAGE_MONITOR alias for D9 pin to feather boards
2018-09-13 23:36:04 +02:00
2dd9407f21
Merge pull request #1186 from dhalbert/uart-enhancements
...
UART enhancements
2018-09-12 16:23:28 -07:00
f21cf15c38
Add OnDiskBitmap which loads pixel data straight from disk.
...
Also, renamed Sprite's palette to pixel_shader so it can be
anything that produces colors based on values (including color values).
Added a ColorConverter that converts RGB888 (found in bitmaps) to
RGB565 for the display.
Fixes #1182
2018-09-12 15:25:59 -07:00
6a046f55c4
UART fixes and enhancements; default board object fix
2018-09-12 17:19:43 -04:00
2bd7040fe0
usb_write() output_len was uint8_t instead of uint32_t
2018-09-12 17:16:52 -04:00
02b3f62460
When UART timeout of zero is given, make read() return data already available
2018-09-12 13:25:49 -04:00
b923324e73
Added HW NEOPIXEL Definition
...
Added definition for the built-in Neopixel. This is useful for CircuitPython Statas: https://learn.adafruit.com/welcome-to-circuitpython/troubleshooting#circuitpython-rgb-status-light-18-10
2018-09-12 07:59:07 -05:00
c3918bae57
PWMOut was not claming channels on shared TCCs
2018-09-11 19:46:47 -04:00
2138b04e45
Update to IS25LP016D
...
Changed .supports_qspi_write to true.
2018-09-11 07:52:23 -05:00
c7cf38186d
Added IS25LP016D
2018-09-10 14:55:18 -05:00
08a2d962e3
Delete README.md
2018-09-10 17:01:31 +00:00
b2f5511de2
Initial Upload of Mini SAM M0
...
Initial Upload of Mini SAM M0
2018-09-10 17:01:00 +00:00
b03037e512
Create README.md
2018-09-10 16:55:55 +00:00
34bcb069cf
Merge pull request #1165 from tannewt/grandcentral
...
Initial Grand Central definition
2018-09-07 15:00:13 -04:00
3ac03a31d8
Fix SDA/SCL
2018-09-07 10:39:18 -07:00
32c616b5dd
Initial Grand Central definition
...
It has a ton of pins in a Mega form-factor
This also includes a change to init the stack earlier. It fixes
a crash that occurs if the flash doesn't start correctly and the
original spot isn't reached.
2018-09-06 16:54:13 -07:00
c2e49dc87f
Merge remote-tracking branch 'adafruit/master' into hallowing
2018-09-06 14:54:55 -07:00
1683eb913d
Minor tweaks based on feedback
2018-09-06 14:49:49 -07:00
4c3b4cacfa
Merge remote-tracking branch 'adafruit/master' into nrf-pin-claiming
2018-09-05 13:15:22 -04:00
2d3f1a10bf
When UART timeout of zero is given, make read() return data already available
2018-09-01 17:07:30 +00:00
9ea809bef7
add pin claiming to devices
2018-08-31 18:38:05 -04:00
585597a252
pin files rework; implement pin claiming; add more boards
2018-08-31 18:05:55 -04:00
121903b6ee
Tweaks based on feedback
2018-08-31 14:21:48 -07:00
6697544cdf
Introduce displayio to render graphics to displays.
...
It's designed to minimize RAM footprint by using Sprites to
represent objects on the screen. The object model also facilitates
partial screen updating which reduces the bandwidth needed to display.
This is all handled in C. Python simply manipulates the objects with
the ability to synchronize to frame timing.
2018-08-31 12:31:52 -07:00
b61cf8d81f
samd: Use RTC to set file timestamp
...
Use RTC to set file timestamp for file operations done on the board.
2018-08-25 20:43:09 +02:00
e8b94d0024
adjust SAMD51 neopixel_write timing
2018-08-24 07:01:50 -04:00
182a8d7120
Merge pull request #1131 from tannewt/hallowing3
...
Support Hallowing in 3.x
2018-08-20 18:26:07 -07:00
2b6b0ffcd2
Remove HID from hallowing so we have more room for other stuff.
2018-08-20 18:04:35 -07:00
44de3d49a8
Speed up zero neopixel pulses.
...
SK6812 on 5v is pickier than WS2812 on 5v.
Hopefully fixes #1083 .
2018-08-20 17:04:46 -07:00
aeeb40e02c
Change hallowing to shipping flash type W25Q64JV-IQ. tested!
2018-08-20 10:52:33 -07:00
1768057e87
add HalloWing
2018-08-20 10:52:24 -07:00
eefb6842a0
i2cslave: Fix missing translate() when raising exceptions
...
The translate() changes where applied after travis had checked the
i2cslave PR so this wasn't caught.
2018-08-18 16:00:06 +02:00
4a4d84ba42
Merge pull request #1064 from notro/i2cslave
...
Add busio.I2CSlave
2018-08-17 16:51:45 -07:00
e8cf6a9072
Update to merged peripheral change.
2018-08-16 18:05:53 -07:00
2cd166b573
Fix esp and samd
2018-08-16 17:41:35 -07:00
de5a9d72dc
Compress all translated strings with Huffman coding.
...
This saves code space in builds which use link-time optimization.
The optimization drops the untranslated strings and replaces them
with a compressed_string_t struct. It can then be decompressed to
a c string.
Builds without LTO work as well but include both untranslated
strings and compressed strings.
This work could be expanded to include QSTRs and loaded strings if
a compress method is added to C. Its tracked in #531 .
2018-08-16 17:40:57 -07:00
11cbeb87ad
ports/atmel-samd: Implement i2cslave.I2CSlave
...
This adds support for SAMD acting as a I2C slave in polled mode.
2018-08-16 17:20:49 +02:00
b6822b86ac
busio/I2C: Split out samd_i2c_get_sercom()
...
It will be shared with I2CSlave.
2018-08-16 17:06:40 +02:00
d8f2a61c39
Change hallowing to shipping flash type W25Q64JV-IQ. tested!
2018-08-14 13:04:33 -04:00
bbc034cd3d
Merge pull request #1104 from tannewt/more_strings
...
Fixes and translate more strings.
2018-08-09 20:00:18 -04:00
24e53ad591
Rework escaping and fix ESP build.
2018-08-09 15:58:45 -07:00
86d2154d71
Change file mode back.
2018-08-09 09:14:14 -07:00
94c5ceab36
Initial SAMR board revision.
2018-08-09 05:36:46 -07:00
b0e33f6a11
atmel-samd: UART: allocate rx buffer in long-lived region
...
This is not strictly needed in order for #1056 to be resolved,
because the "make long-lived" machinery is unaware of this pointer.
However, as UARTs are assumed to be long-lived, this change is
beneficial because it moves the long-lived buffer into the upper
memory area with other long-lived objects, instead of remaining in
the low heap.
2018-08-08 19:21:57 -05:00
2e80f37709
Merge pull request #1096 from tannewt/tune_neopixel
...
Retune neopixel timings on SAMD51. They were too slow.
2018-08-07 21:33:12 -04:00
b0dd645e27
Retune neopixel timings on SAMD51. They were too slow.
...
Fixes #1083
2018-08-07 16:58:37 -07:00
933add6cd8
Support internationalisation.
2018-08-07 14:58:57 -07:00
498fec64e2
increase new dynamic stack size to a comfortable value for now
2018-08-03 22:35:20 -04:00
dfa2581ffd
Merge pull request #1057 from tannewt/flexible_heap
...
Add basic memory allocation outside Python runtime
2018-08-02 18:43:06 -04:00
5704bc8c93
Share memory.c and a bit of polish.
2018-08-02 14:35:46 -07:00
64e5691fe7
Update to peripherals merge.
2018-08-02 13:59:12 -07:00
168aa394db
Move pin struct to the peripherals library.
...
Its slimmed down by removing the qstr and bit packing TCC info.
The trinket m0 build actually grows by 20 bytes. The arduino zero
build shrinks by 188 bytes.
2018-08-02 13:59:05 -07:00
b50f46d4be
Rename to SRC_QSTR_PREPROCESSOR for clarity.
2018-08-02 11:07:22 -07:00
8cf03d2d00
Speed up QSTR creation by pre-filtering files before pre-processing.
2018-08-02 00:51:52 -07:00
533d8dda96
fix samd usb hid typo
2018-08-01 08:40:04 +07:00
a88cdaca6a
Remove rogue execute bit. Must a common incorrect shortcut for me. :-)
2018-07-31 12:42:21 -07:00
b334289669
Reenable LTO for debug.
2018-07-31 05:18:23 -07:00
12cf5e51c2
Allow for resizing the stack area.
2018-07-31 05:18:23 -07:00
777542c716
Add basic memory allocation outside Python runtime
...
This allows for the heap to fill all space but the stack. It also
allows us to designate space for memory outside the runtime for
things such as USB descriptors, flash cache and main filename.
Fixes #754
2018-07-31 05:18:03 -07:00
a6d94b6845
Merge pull request #1068 from dhalbert/micropython-25ae98f-merge
...
Micropython 25ae98f
2018-07-30 12:33:44 -07:00
fbe98ff9a9
Merge pull request #1071 from dhalbert/3.x-hallowing
...
add HalloWing
2018-07-29 20:24:47 -04:00
680597547c
add HalloWing
2018-07-29 19:22:16 -04:00
f48b70050e
merge finished
2018-07-28 13:29:47 -04:00
2809b4f9dd
Merge branch 'master' into micropython-25ae98f-merge
2018-07-16 19:36:40 -04:00
a20ab40ed2
Merge 3.0.0 final bugfixes and changes to master
2018-07-16 09:01:46 -04:00
e2e01efa84
compiles and runs; hangs on import storage;storage.VfsFat.<tab>
2018-07-13 22:51:10 -04:00
8bb363f7c4
must set pull after setting direction with gpio_set_pin routines
2018-07-09 17:18:06 -04:00
54179a0189
Use .s in samd Makefile too.
2018-07-05 04:44:00 -07:00
d9723bb613
include RTC fix for SAMd51 in circuitpython build
2018-07-03 06:52:05 -07:00
074c5ea144
Merge pull request #977 from dhalbert/update_crickit_libs-2
...
update crickit-related libs
2018-07-03 12:04:05 -07:00
bf9981e8db
bring all frozen libraries up to date
2018-07-03 14:39:21 -04:00
ec78d3cefd
Mark pointers in cpu registers as in use.
...
This prevents bugs where gc_collect is called from C code that did
a recent allocation.
2018-07-03 05:45:50 -07:00
bf00cde37d
Comment tweak after board change
2018-07-02 14:51:06 -07:00
2a0b857643
implement mp_hal_delay_us() to not need interrupts, and use it
2018-06-29 16:01:46 -04:00
df4469f92b
Test the BOARD parameter for nullness; display a error if nothing provided
2018-06-29 12:22:31 -07:00
d392f01f2c
include RTC fix for SAMd51 in circuitpython build
2018-06-29 05:45:38 -07:00
b4fd77bb7c
fix nrf and esp8266 builds for OneWire fix
2018-06-29 00:00:05 -04:00
52a11547cb
fix OneWire timing and DigitalInOut.switch_to_input()
2018-06-28 23:32:20 -04:00
1f3de5174e
Freeze Adafruit_CircuitPython_Crickit into crickit builds
2018-06-26 19:49:55 -04:00
de4cd1ee73
add pins D3/D4 to pins.c
...
fixes #948
2018-06-20 22:26:59 -04:00
80d16cb7df
add pins D3/D4 to pins.c
...
fixes #948
2018-06-19 22:34:29 -04:00
a5e03b76a6
Split out the peripherals library in preparation of sharing with MakeCode.
2018-06-15 16:16:21 -07:00
Dan Halbert
brentru
ladyada
Dan Halbert
Thea Flowers
Thea Flowers
ProductDev
Kamil Tomaszewski
wallarug
Scott Shawcroft
Cedar Grove Maker Studios
Chris Osterwood
arturo182
Melissa LeBlanc-Williams
Scott Shawcroft
jepler
Kattni Rembor
Radomir Dopieralski
sommersoft
Dave Astels
Keith Packard
sommersoft
Carl Elkins
jandjstudios
iot49
Anthony DiGirolamo
shazz
Elvis Pfützenreuter
sabas1080
ladyada
Carlos
ITACA Innovation S.R.L
siddacious
Max Holliday
Melissa LeBlanc-Williams
Sabas
Justin R. Cutler
John Reese
caternuson
TG-Techie
Elias Santistevan
ShawnHymel
Roy Hooper
TG-Techie
Benjamin Shockley
Noralf Trønnes
ATMakersBill
Nick Moore
Paul Sajna
Pierrick C
Paul Kierstead
Jerry Needell
Jeff Epler
hathach
Scott Shawcroft
mrmcwethy