Commit Graph

72 Commits

Author SHA1 Message Date
Mark 8ed7b114cd
Merge branch 'main' into uzlib-module 2022-04-03 11:48:37 -05:00
Dan Halbert d70f149390 change module list in extra_coverage test results 2022-02-24 22:44:13 -05:00
gamblor21 ce4a0806b3 Added test coverage 2022-02-21 10:24:13 -06:00
Jeff Epler a040b6962f
update module list in extra coverage test 2022-02-19 09:38:56 -06:00
Jeff Epler 01cabb0324 Merge tag 'v1.18'
Boosted performance, board.json metadata, more mimxrt, rp2, samd features

This release of MicroPython sees a boost to the overall performance of the
VM and runtime.  This is achieved by the addition of an optional cache to
speed up general hash table lookups, as well as a fast path in the VM for
the LOAD_ATTR opcode on instance types.  The new configuration options are
MICROPY_OPT_MAP_LOOKUP_CACHE and MICROPY_OPT_LOAD_ATTR_FAST_PATH.  As part
of this improvement the MICROPY_OPT_CACHE_MAP_LOOKUP_IN_BYTECODE option has
been removed, which provided a similar map caching mechanism but with the
cache stored in the bytecode, which made it not useful on bare metal ports.
The new mechanism is measured to be at least as good as the old one,
applies to more map lookups, has a constant RAM overhead, and applies to
native code as well as bytecode.

These performance options are enabled on the esp32, mimxrt, rp2, stm32 and
unix ports.  For esp32 and mimxrt some code is also moved to RAM to further
boost performance.  On stm32, performance increases by about 20% for
benchmarks that are heavy on name lookups, like misc_pystone.py and
misc_raytrace.py.  On esp32 performance can increase by 2-3x, and on mimxrt
it is up to 6x.

All boards in all ports now have a board.json metadata file, which is used
to automatically build firmware and generate a webpage for that board
(among other possibilities).  Auto-build scripts have been added for this
purpose and they build all esp32, mimxrt, rp2, samd and stm32 boards.  The
generated output is available at https://micropython.org/download.

Support for FROZEN_DIR and FROZEN_MPY_DIR has been deprecated for some time
and was finally removed in this release.  Instead of these, FROZEN_MANIFEST
can be used.  The io.resource_stream() function is also removed, replaced
by the pure Python version in micropython-lib.

The search order for importing frozen Python modules is now controlled by
the ".frozen" entry in sys.path.  This string is added by default in the
second position in sys.path.  User code should adjust sys.path depending on
the desired behaviour.  Putting ".frozen" first in sys.path will speed up
importing frozen modules.

A bug in multiple precision integers with bitwise of -0 was fixed in commit
2c139bbf4e.

The platform module has been added to allow querying the compiler and
underlying SDK/HAL/libc version.  This is enabled on esp32, mimxrt and
stm32 ports.

The mpremote tool now supports seek, flush, mkdir and rmdir on PC-mounted
filesystems.  And a help command has been added.

The documentation has seen many additions and improvements thanks (for a
second time) to the Google Season of Docs project.  The rp2 documentation
now includes a reference for PIO assembly instructions, a PIO quick
reference and a PIO tutorial.  The random and stm modules have been
documented, along with sys.settrace, manifest.py files and mpremote.  There
is also now more detail about the differences between MicroPython and
standard Python 3.5 and above.

The esp32 port sees support for ESP32-S3 SoCs, and new boards GENERIC_S3,
ESP32_S2_WROVER, LOLIN_S2_MINI, LOLIN_S2_PICO and UM_FEATHERS2NEO.  The PWM
driver has been improved and now supports all PWM timers and channels, and
the duty_u16() and duty_ns() methods, and it keeps the duty constant when
changing frequency.  The machine.bitstream() function has been improved to
use RMT, with an option to select the original bit-banging implementation.

The mimxrt port gained new hardware features: SDRAM and SD card support, as
well as network integration with a LAN driver.  The machine.WDT class was
added along with the machine.reset_cause(), machine.soft_reset(),
machine.unique_id() add machine.bitstream() functions.  DHT sensor support
was added, and f-strings were enabled.

The rp2 port now has support for networking, and bluetooth using NimBLE.
The Nina-W10 WiFi/BT driver is fully integrated and supported by the new
Arduino Nano RP2040 connect board.  I2S protocol support is added along
with a machine.bitstream() driver and DHT sensor support.  The PWM driver
had a bug fix with the accuracy of setting/getting the frequency, and the
duty value is now retained when changing the frequency.

On the samd port there is now support for the internal flash being a block
device, and for filesystems and the os module.  Pin and LED classes have
been implemented.  There are more time functions, more Python features
enabled, and the help() function is added.  SEEED_WIO_TERMINAL and
SEEED_XIAO board definitions are now available.

The stm32 port now has support for F427, F479 and H7A3(Q)/H7B3(Q) MCUs, and
new board definitions for VCC_GND_H743VI, OLIMEX_H407, MIKROE_QUAIL,
GARATRONIC_PYBSTICK26_F411, STM32H73B3I_DK.  A bug was fixed in the SPI
driver where a SPI transfer could fail if the CYW43 WiFi driver was also
active at the same time.

On the windows port the help() function has been enabled, and support for
build variants added, to match the unix port.

The zephyr port upgraded Zephyr to v2.7.0.

The change in code size since the previous release for various ports is
(absolute and percentage change in the text section):

       bare-arm:  -1520  -2.605%
    minimal x86:  -2256  -1.531%
       unix x64:   -457  -0.089%
    unix nanbox:   -925  -0.204%
          stm32:   +312  +0.079% PYBV10
         cc3200:   -176  -0.096%
        esp8266:   +532  +0.076% GENERIC
          esp32: +27096  +1.820% GENERIC
            nrf:   -212  -0.121% pca10040
            rp2:  +9904  +2.051% PICO
           samd: +35332 +33.969% ADAFRUIT_ITSYBITSY_M4_EXPRESS

The changes that dominate these numbers are:
- bare-arm, minimal: use of new MICROPY_CONFIG_ROM_LEVEL_MINIMUM option and
  subsequent disabling of remaining optional features
- unix, cc3200, nrf: general code size reductions of the core
- stm32: performance improvements, addition of platform module
- esp8266: enabling f-strings
- esp32: use of -O2 instead of -Os
- rp2: machine.I2S and other new hardware features
- samd: filesystem support and other new hardware features

Thanks to everyone who contributed to this release: Alan Dragomirecký,
Alexey Shvetsov, Andrew Leech, Andrew Scheller, Antoine Aubert, Boris
Vinogradov, Chris Boudacoff, Chris Fiege, Christian Decker, Damien George,
Daniel Gorny, Dave Hylands, David Michieli, Emilie Feral, Frédéric Pierson,
gibbonsc, Henk Vergonet, iabdalkader, Ihor Nehrutsa, Jan Hrudka, Jan Staal,
jc_.kim, Jim Mussared, Jonathan Hogg, Laurens Valk, leo chung, Lorenzo
Cappelletti, Magnus von Wachenfeldt, Matt Trentini, Matt van de Werken,
Maureen Helm, Michael Bentley, Michael Buesch, Mike Causer, Mike Teachman,
Mike Wadsten, Ned Konz, NitiKaur, oli, patrick, Patrick Van Oosterwijck,
Peter Boin, Peter Hinch, Peter van der Burg, Philipp Ebensberger, Pooya
Moradi, retsyo, robert-hh, roland van straten, Scott Armitage, Sebastian
Wicki, Seon Rozenblum, Sergei Silnov, Simon Baatz, Stewart Bonnick, stijn,
Tobias Thyrrestrup, Tomas Vanek, YoungJoon Chun.

What follows is a detailed list of changes, generated from the git commit
history, and organised into sections.

Main components
===============

all:
- remove MICROPY_OPT_CACHE_MAP_LOOKUP_IN_BYTECODE
- update Python formatting to latest Black version 21.12b0
- remove support for FROZEN_DIR and FROZEN_MPY_DIR

py core:
- parse: simplify parse nodes representing a list
- emitnative: ensure load_subscr does not clobber existing REG_RET
- mpconfig.h: define initial templates for "feature levels"
- vm: add a fast path for LOAD_ATTR on instance types
- map: add an optional cache of (map+index) to speed up map lookups
- builtinimport: forward all debug printing to MICROPY_DEBUG_PRINTER
- add wrapper macros so hot VM functions can go in fast code location
- runtime: fix crash when exc __new__ doesn't return an exc instance
- mpconfig.h: define the "extra" feature level
- mpconfig.h: revert MICROPY_REPL_INFO to disabled at all levels
- gc: add hook to run code during time consuming GC operations
- showbc: print unary-op string when dumping bytecode
- modsys: replace non-ASCII quote char with ASCII char
- runtime: allow types to use both .attr and .locals_dict
- lexer: support nested [] and {} characters within f-string params
- objfun.h: remove obsolete comments about entries in extra_args
- builtinimport: refactor module importing
- showbc: fix printing of raw bytecode header on nanbox builds
- modio: remove io.resource_stream function
- only search frozen modules when '.frozen' is found in sys.path
- mkrules.cmake: set frozen preprocessor defs early
- runtime: allow initialising sys.path/argv with defaults
- mpstate.h: only include sys.path/argv objects in state when enabled
- mpz: fix bugs with bitwise of -0 by ensuring all 0's are positive
- qstr: reset mpstate.qstr_last_chunk before raising an error
- modbuiltins: add additional macro for extending builtins
- mpconfig.h: define MICROPY_PY_USSL_FINALISER only if not defined

extmod:
- machine_i2c: make SoftI2C configurable via macro option
- machine_spi: make SoftSPI configurable via macro option
- modonewire: make _onewire module configurable via macro option
- machine_pwm: factor out machine.PWM bindings to common code
- move modnetwork and modusocket from stm32 to extmod
- modnetwork: add STA_IF and AP_IF constants
- modnetwork: add extended socket state
- modusocket: add read/write stream methods to socket object
- modnetwork: define network interfaces in port config files
- network_cyw43: make consistent use of STA and AP constants
- modnetwork: remove STM32 references
- modnetwork: remove modnetwork socket u_state member
- mpbthci.h: add mp_bluetooth_hci_uart_any prototype
- nimble: add nimble CMake fragment file
- add platform module
- moduplatform: improve implementation for PC ports
- vfs_posix_file: support MP_STREAM_POLL in vfs_posix_file_ioctl
- modbluetooth: add connection interval to gap_connect
- nimble: update to NimBLE v1.4
- nimble: remove workaround for OS_ENOMEM
- uasyncio: fix gather returning exceptions from a cancelled task
- uplatform: remove unused definitions
- uplatform: use generic custom platform string
- network_ninaw10: fix scan list order to match other NICs
- modbluetooth: support gap_connect(None) to cancel a connection
- modure: redirect regex debug printing to mp_printf
- network_ninaw10: fix config of AP mode
- network_ninaw10: disable active connections before connecting
- network_ninaw10: make NIC state persistent
- network_ninaw10: return -1 on timeout from recv/send
- network_ninaw10: make recv/recvfrom interchangeable
- moduplatform: detect xtensa arch
- modusocket: allow setting timeout on unbound sockets
- modusocket: initialise accepted socket state
- network_ninaw10: use socket timeout preset in modusocket
- modbluetooth: fix conditional compilation of ringbuf_put_uuid
- modbluetooth: put declaration of connect_cancel in correct place

shared:
- libc/string0: don't include string.h, and provide __memcpy_chk
- runtime/pyexec: cleanup EXEC_FLAG flag constants

drivers:
- ninaw10: add ublox Nina-W10 WiFi/BT module driver
- lsm6dsox: add LSM6DSOX driver and examples
- neopixel: avoid heap alloc in fill()
- ninaw10: fix BSSID byte order, and add null byte to ESSID
- ninaw10/nina_wifi_drv: fix DNS resolution

mpy-cross: no changes specific to this component/port

lib:
- mynewt-nimble: switch to the MicroPython fork of NimBLE
- asf4: point submodule to latest commit on circuitpython branch
- update pico-sdk to 1.3.0 and tinyusb to 0.12.0
- stm32lib: update library for L4 v1.17.0, new G4, WL, and MMC fixes
- stm32lib: update library for fix to F7 USB HS

Support components
==================

docs:
- library/os.rst: clarify littlefs requirements for block erase
- library/bluetooth.rst: update incorrect link to gatts_write
- make.bat: change Windows output dir from '_build' to 'build'
- library/machine.I2S.rst: specify that I2S.shift args are kw-only
- esp32: explain ESP32 PWM modes, timers, and channels
- rp2: add reference for PIO assembly instructions, and PIO tutorial
- library/random.rst: document the random module
- reference/mpremote.rst: add docs for mpremote
- reference/manifest.rst: add docs for manifest.py files
- library/stm.rst: document the stm module
- esp32/tutorial: add an example of peripheral control via regs
- rp2/general.rst: fix typo with missing spaces
- library/framebuf.rst: adjust dimensions in example
- library/rp2.rst: update function asm_pio_encode to add sideset_opt
- reference/filesystem.rst: add detail on how to use littlefs fuse
- rp2/quickref.rst: add section on PIO
- library/sys.rst: add docs for sys.settrace
- esp8266/tutorial: fix comments of FrameBuffer examples
- library/uasyncio.rst: detail exception behaviour in cancel/timeout
- library/machine.Timer.rst: document 'id' as positional-only arg
- library/machine.SPI.rst: add example SPI usage
- library/machine.Timer.rst: document `period` and `callback` args
- library/machine.Pin.rst: add Pin.ANALOG mode constant
- remove trailing spaces and convert tabs to spaces
- library/sys.rst: add note about '.frozen' as an entry in sys.path
- differences: document details of new PEPs/features in Python 3.5+
- update copyright year range to include 2022
- esp32: update RMT quickref example to match latest code

examples: no changes specific to this component/port

tests:
- perf_bench: use math.log instead of math.log2
- basics: add tests for type-checking subclassed exc instances
- micropython/const.py: add comment about required config for test
- cpydiff: clarify f-string diffs regarding concatenation
- basics/int_big_cmp.py: add more tests for big-int comparison
- extmod: skip uselect_poll_udp when poll() is not available

tools:
- autobuild: add auto build for GENERIC_C3_USB
- ci.sh: use IDF v4.4 as part of esp32 CI and build GENERIC_S3
- autobuild: add the MIMXRT1010_EVK board to autobuild
- ci.sh: use a specific ESP IDF v4.4 commit
- autobuild: add script to generate website board metadata
- dfu.py: make tool work with python3 when parsing DFU files
- autobuild: automatically build all mimxrt, rp2 and samd boards
- autobuild: automatically build all stm32 boards
- mpremote: implement seek and flush in ioctl method
- autobuild: automatically build all esp32 boards
- upip.py: support == to specify exact package version
- makemanifest.py: make str conversion compatible with Python 2
- makemanifest.py: merge make-frozen.py
- mpremote: add mkdir and rmdir to RemoteFS
- mpremote: add help command
- mpremote: add link to mpremote docs URL in help message
- upip.py: skip '.frozen' entry in sys.path for install path
- autobuild: build esp8266 OTA image with GENERIC_1M board
- ci.sh: upgrade Zephyr docker image to v0.21.0
- ci.sh: build zephyr nucleo_wb55rg to test zephyr bluetooth build

CI:
- workflows: use Python 3.8 for macos workflow
- workflows: add new workflow to build ports download metadata

The ports
=========

all ports:
- add board.json for all boards
- add images, features and urls to board.json
- add '.frozen' as the first entry in sys.path
- move '.frozen' to second entry in sys.path

bare-arm port:
- mpconfigport.h: use MICROPY_CONFIG_ROM_LEVEL_MINIMUM
- mpconfigport.h: disable remaining optional features

cc3200 port: no changes specific to this component/port

esp8266 port:
- boards/GENERIC: enable f-strings
- extract qstr from object when comparing keys in config()
- etshal.h: remove unneeded function declarations
- allow building a board to any dest directory

esp32 port:
- boards: add new FeatherS2-Neo board definition
- machine_timer: use tx_update member for IDF 4.4 and above
- add support for ESP32-S3 SoCs
- boards: add new GENERIC_S3 board definition
- machine_hw_spi: fix hardware SPI DMA channels for S2/S3
- boards: add board definition for ESP32-S2-WROVER module
- boards: add LOLIN_S2_MINI ESP32-S2 board
- machine_pwm: add support for all PWM timers and channels
- README: updated readme with req IDF vers for ESP32-S2, C3 and S3
- usb: add USB host connection detection for CDC serial output
- machine_pin: block out IO16 and IO17 when using SPIRAM on ESP32
- mpthreadport: fix TCB cleanup function so thread_mutex is ready
- main: add option for a board to hook code into startup sequence
- split out WLAN code from modnetwork.c to network_wlan.c
- enable optimisations and move code to iRAM to boost performance
- usb: improve speed of USB CDC output
- add specific deploy_s2.md instructions for esp32-s2
- boards/LOLIN_S2_MINI: add image to board.json
- boards: update board and deploy metadata for UM_xxx boards
- usb: further improve speed of USB CDC output
- boards/LOLIN_S2_PICO: add LOLIN_S2_PICO board definition files
- boards/ESP32_S2_WROVER: link to specific deploy_s2 instructions
- support building with latest IDF v5
- in machine_i2s, send null samples in underflow situations
- in machine_i2s, make object reference arrays root pointers
- add SDCard support for S3, and a GENERIC_S3_SPIRAM board
- boards/GENERIC_S3: enable BLE on ESP32 S3
- machine_pwm: implement duty_u16() and duty_ns() PWM methods
- extract qstr from object when comparing keys in config()
- machine_pin: make GPIO 26 usable for S2,S3 if SPIRAM not config'd
- machine_hw_spi: fix SPI default pins reordering on ESP32-S2/S3
- machine_hw_spi: set proper default SPI(id=1) pins on S2,S3 and C3
- machine_hw_spi: set proper default SPI(id=2) pins on S2 and S3
- boards: remove SPI pin defaults from GENERIC S2/S3 boards
- modnetwork: synchronize WiFi AUTH_xxx constants with IDF values
- machine_pwm: keep duty constant when changing frequency
- machine_bitstream: replace bit-bang code with RMT-based driver
- machine_i2s: add support for ESP-IDF 4.4
- machine_bitstream: fix signal duplication on output pins
- esp32: enable platform module with IDF version
- boards/GENERIC_D2WD: build with -Os optimisation
- esp32_rmt: install RMT driver on core 1
- machine_bitstream: reinstate bitstream bit-bang implementation

javascript port: no changes specific to this component/port

mimxrt port:
- sdcard: implement SDCard driver
- machine_bitstream: add bitstream function to machine module
- rework flash configuration
- sdram: add SDRAM support
- eth: add LAN support and integrate the network module
- modmachine: implement machine.WDT() and machine.reset_cause()
- boards: fix the D14/D15 pin assignment of MIMXRT1050/60/64_EVK
- hal: remove duplicate definitions from flexspi_hyper_flash.h
- dma_channel: fix the DMA channel management
- fix cycle counter for time.ticks_cpu() and machine.bitstream()
- add dht_readinto() to the mimxrt module, and freeze dht.py
- extend the help() message and README.md
- mpconfigport.h: enable f-strings
- modmachine: implement soft_reset() and unique_id() functions
- boards/make-pins.py: allow empty lines and comments in pins.csv
- optimize the runtime speed
- enable the platform module
- boards: add the Seeed ARCH MIX board
- boards: update the board.json files and add deploy_xx.md files
- fix mp_hal_quiet_timing_enter()/exit() so timer still runs
- support PWM using the FLEXPWM and QTMR modules
- define UART 0 on MIMXRT boards
- support selection of PHY type and address
- re-enable eth checksum creation by HW
- fix a tiny unnoticed bug in sdcard.c
- add a driver for the DP83848 PHY device
- refactor the reading of the machine id
- enable ticks_cpu at boot time for NDEBUG builds only
- use -Og instead of -O0 for DEBUG builds
- tidy up the board flash related files
- hal: allow readSampleClkSrc to be configured by a board
- enable MICROPY_PY_USSL_FINALISER

minimal port:
- mpconfigport.h: use MICROPY_CONFIG_ROM_LEVEL_MINIMUM
- Makefile: don't force a 32-bit build
- mpconfigport.h: disable features that are not needed

nrf port:
- Makefile: improve Black Magic Probe commands
- main: use VFS helper function to mount fs and chdir

pic16bit port: no changes specific to this component/port

powerpc port: no changes specific to this component/port

qemu-arm port: no changes specific to this component/port

rp2 port:
- mpconfigport.h: enable heapq module
- add support for bluetooth module using NimBLE
- add framework for networking
- mpconfigport.h: use the "extra" feature level
- enable optimisations (comp goto, map cache, fast attr)
- machine_i2s: add I2S protocol support
- add support for Nina-W10 WiFi/BT module
- boards: add support for Arduino Nano RP2040
- machine_bitstream: implement the machine.bitstream driver
- boards: add neopixel.py to manifest.py
- rp2_pio: support exec with sideset
- boards/PIMORONI_PICOLIPO_16MB: fix 16MB flash size
- boards: add PYBSTICK26 RP2040 board definition
- machine_uart: handle and clear UART RX timeout IRQ
- boards/ARDUINO_NANO_RP2040_CONNECT: set default I2C pins
- machine_pwm: fix PWM frequency setting
- machine_pwm: keep duty value when changing the frequency
- add support for DHT11 and DHT22 sensors
- CMakeLists.txt: allow a board to override PICO_BOARD
- boards/GARATRONIC_PYBSTICK26_RP2040: use correct pico-sdk board cfg

samd port:
- integrate latest asf4, add help, more time funcs and uPy features
- samd_soc: allow a board to configure the low-level MCU config
- add internal flash block device, filesystem and uos support
- add Pin and LED classes, and machine.unique_id
- boards/ADAFRUIT_FEATHER_M0_EXPRESS: update for flash and pins
- boards/ADAFRUIT_ITSYBITSY_M4_EXPRESS: update for flash and pins
- boards/MINISAM_M4: update for flash and pins
- boards/ADAFRUIT_TRINKET_M0: update for flash and pins
- boards/SAMD21_XPLAINED_PRO: update for flash and pins
- boards/SEEED_WIO_TERMINAL: add new board definition
- boards/SEEED_XIAO: add new board definition
- README.md: update README to reflect new features and boards

stm32 port:
- pin: enable GPIO clock of pin if it's constructed without init
- main: don't unconditionally enable GPIO A,B,C,D clocks
- boards/VCC_GND_H743VI: add board definition for VCC_GND_H743VI
- boards/OLIMEX_E407: add Ethernet RMII support
- boards/LEGO_HUB_NO6: remove user paths from cc2564 init file
- boards: remove trailing spaces, and add newline at end of file
- add basic support for STM32H750
- add support for H7A3(Q)/H7B3(Q), and STM32H73B3I_DK board defn
- suggest putting code in main.py not boot.py
- boards/make-pins.py: allow a CPU pin to be hidden
- boards/make-pins.py: allow empty lines and comments in pins.csv
- dma: add functions for external users of DMA to enable clock
- enable LOAD_ATTR fast path, and map lookup caching on >M0
- boards: add OLIMEX H407 board definition
- enable platform module
- extended flash filesystem space to 512K on H743 boards
- boards/NUCLEO_H743ZI: enable VfsLfs2 on NUCLEO_H743ZI(2) boards
- boards: add PF11-BOOT0 to stm32f091_af.csv
- machine_i2c: use hardware I2C for STM32H7
- sdram: enforce gcc opt, and use volatile and DSB in sdram_test
- usbd_cdc_interface: allow a board to hook into USBD CDC RX events
- mpbthciport: allow a board to hook BT HCI poll functions
- pendsv: allow a board to add entries for pendsv_schedule_dispatch
- boards: add images to board.json for Adafruit and VCC_GND boards
- uart: fix race conditions and clearing status in IRQ handler
- mpconfigport.h: use the "extra" feature level
- in machine_i2s, send null samples in underflow situations
- in machine_i2s, make object reference arrays root pointers
- led: support an extra 2 LEDs in board configuration
- boards/MIKROE_CLICKER2_STM32: add more detail to board.json
- boards: add new board MikroElektronika Quail, and F427 support
- main: run optional frozen module at boot
- sdio: don't explicitly disable DMA2 on deinit of SDIO
- dma: make DMA2_Stream3 exclusive to SDIO when CYW43 enabled
- boards: build NUCLEO_WB55 and STM32F769DISC without mboot enabled
- boards: add PYBSTICK26 F411 board definition
- boards/NADHAT_PYBF405: rename board to GARATRONIC_NADHAT_F405
- usb: use a table of allowed values to simplify usb_mode get/set
- boards/NUCLEO_WB55: update rfcore_firmwre for new WS
- flashbdev: support generic flash storage config via link symbols
- boards: convert F413,F439,H743,L4xx,WB55 to new flash FS config
- add support for F479 MCUs
- include HAL MMC code in F4 builds
- boards/make-pins.py: use cpu pins to define static alt-fun macros
- boards/NUCLEO_WB55: fix LED ordering
- boards/LEGO_HUB_NO6: set filesystem label as HUB_NO6
- boards: remove stray '+' characters at start of lines in ld files
- boards: remove unused MICROPY_HW_ENABLE_TIMER config
- boards: enable MICROPY_HW_ENABLE_SERVO on various boards
- update L4 code to build with latest stm32lib and L4 HAL 1.17.0
- main: call sdcard_init when only MICROPY_HW_ENABLE_MMCARD enabled
- sdcard: support 8-bit wide SDIO bus
- sdcard: add config option to force MM card capacity
- factoryreset: init vfs flags before calling pyb_flash_init_vfs
- qspi: fix typo in address comment
- boards/make-pins.py: generate empty ADC table if needed
- boards/OLIMEX_H407: fix typo in OLIMEX H407 board.json
- network_wiznet5k: fix build error with wiznet5k and lwip enabled
- enable MICROPY_PY_USSL_FINALISER

teensy port:
- switch to use manifest.py instead of FROZEN_DIR

unix port:
- enable LOAD_ATTR fast path, and map lookup caching
- modusocket: support MP_STREAM_POLL in unix socket_ioctl
- modos: add support for uos.urandom(n)
- coverage: change remaining printf to mp_printf
- Makefile: use -Og instead of -O0 for debug builds

windows port:
- README: remove unsupported Python instructions for Cygwin
- mpconfigport.h: enable help and help("modules")
- add support for build variants to windows port
- run tests via Makefile
- appveyor: build both standard and dev variants
- appveyor: build mpy-cross only once for mingw-w64
- msvc: run qstr preprocessing phase in parallel

zephyr port:
- mphalport.h: remove unused and unimplemented C-level pin API
- increase minimum CMake version to 3.20.0
- update include path to reboot.h
- get UART console device from devicetree instead of Kconfig
- use CONFIG_USB_DEVICE_STACK for conditional USB device support
- upgrade to Zephyr v2.7.0
- modbluetooth_zephyr: provide dummy connect_cancel function
2022-02-15 12:36:26 -06:00
Jim Mussared cc23e99f32 py/modio: Remove io.resource_stream function.
This feature is not enabled on any port, it's not in CPython's io module,
and functionality is better suited to the micropython-lib implementation of
pkg_resources.
2021-12-17 23:53:44 +11:00
microDev 69faaa52b8
run test for traceback module 2021-12-02 14:55:02 +05:30
Jeff Epler 1f1def54b7
add aesio to unix coverage build 2021-11-30 15:25:05 -06:00
Jeff Epler 1cea871c70
enable rainbowio on unix coverage port 2021-11-12 17:31:14 -06:00
Jeff Epler 167665f8b7
fix build 2021-11-12 11:03:45 -06:00
Jeff Epler b0203381db Update module list in test 2021-10-26 08:54:18 -05:00
microDev a279f7b42c
update extra_coverage.py.exp 2021-10-05 23:48:32 +05:30
Jeff Epler db3945edfe Make %p include the 0x prefix
.. and modify some messages where 0x was specified "manually".

This involves updating some tests to expect the new 0x to appear.
2021-08-29 11:36:29 -05:00
microDev 25437dcb33
Merge branch 'main' into atexit 2021-08-20 09:45:54 +05:30
Jeff Epler f9393c9e51 enable qrio in unix coverage build, and add a test 2021-08-05 12:24:07 -05:00
microDev 4938851122
remove legacy sys.atexit() implementation 2021-07-30 10:00:00 +05:30
Jeff Epler 87d3740c64 Merge tag 'v1.16' 2021-06-18 10:54:19 -05:00
Scott Shawcroft e02a26453c
Merge MicroPython 1.14 into CircuitPython 2021-05-11 15:07:40 -07:00
Scott Shawcroft f0bb26d70f
Merge MicroPython 1.13 into CircuitPython 2021-05-04 18:06:33 -07:00
Scott Shawcroft b35fa44c8a
Merge MicroPython 1.12 into CircuitPython 2021-05-03 14:01:18 -07:00
Artyom Skrobov ca35c0059c py/repl: Autocomplete builtin modules.
Doing "import <tab>" will now complete/list built-in modules.

Originally at adafruit#4548 and adafruit#4608

Signed-off-by: Artyom Skrobov <tyomitch@gmail.com>
2021-05-02 23:11:14 +10:00
Kathryn Lingel 1f1a54d0b1 py/repl: Filter private methods from tab completion.
Anything beginning with "_" will now only be tab-completed if there is
already a partial match for such an entry.  In other words, entering
foo.<tab> will no longer complete/list anything beginning with "_".

Originally at adafruit#1850

Signed-off-by: Kathryn Lingel <kathryn@lingel.net>
2021-05-02 23:11:03 +10:00
Scott Shawcroft 76033d5115
Merge MicroPython v1.11 into CircuitPython 2021-04-26 15:47:41 -07:00
Joris Peeraer 5020b14d54 py/mpprint: Fix length calculation for strings with precision-modifier.
Two issues are tackled:

1. The calculation of the correct length to print is fixed to treat the
   precision as a maximum length instead as the exact length.
   This is done for both qstr (%q) and for regular str (%s).

2. Fix the incorrect use of mp_printf("%.*s") to mp_print_strn().

   Because of the fix of above issue, some testcases that would print
   an embedded null-byte (^@ in test-output) would now fail.
   The bug here is that "%s" was used to print null-bytes. Instead,
   mp_print_strn is used to make sure all bytes are outputted and the
   exact length is respected.

Test-cases are added for both %s and %q with a combination of precision
and padding specifiers.
2020-12-07 23:32:06 +11:00
stijn 25c4563f26 examples: Add example code for user C modules, both C and C++.
Add working example code to provide a starting point for users with files
that they can just copy, and include the modules in the coverage test to
verify the complete user C module build functionality.  The cexample module
uses the code originally found in cmodules.rst, which has been updated to
reflect this and partially rewritten with more complete information.
2020-10-29 15:30:42 +11:00
stijn fad4079778 esp32,unix: Support building C++ code.
Support building .cpp files and linking them into the micropython
executable in a way similar to how it is done for .c files.  The main
incentive here is to enable user C modules to use C++ files (which are put
in SRC_MOD_CXX by py.mk) since the core itself does not utilize C++.

However, to verify build functionality a unix overage test is added.  The
esp32 port already has CXXFLAGS so just add the user modules' flags to it.
For the unix port use a copy of the CFLAGS but strip the ones which are not
usable for C++.
2020-10-29 15:29:50 +11:00
Damien George eaf30c516a tests/unix: Add coverage tests for kbd-intr and scheduler. 2020-02-07 16:08:29 +11:00
Yonatan Goldschmidt 35e664d779 tests/unix: Add coverage tests for mp_obj_is_type() and variants. 2020-01-24 10:57:17 +11:00
Damien George 27f41e624c tests/unix: Add coverage test for mp_obj_new_exception_args.
Because it's no longer called anywhere in the code.
2020-01-23 13:37:25 +11:00
Damien George dccace6f3f tests/unix: Add coverage tests for pairheap data structure. 2020-01-22 17:31:18 +11:00
Damien George 3448e69c2d tests/unix: Add coverage test for new mp_obj_int_get_uint_checked func. 2020-01-14 23:45:56 +11:00
Jim Mussared f67fd95f8d unix/coverage: Add coverage tests for ringbuf. 2019-10-01 09:51:02 +10:00
Josh Lloyd 7d58a197cf py: Rename MP_QSTR_NULL to MP_QSTRnull to avoid intern collisions.
Fixes #5140.
2019-09-26 16:04:56 +10:00
Damien George 64abc1f47a tests/unix: Update extra_coverage expected output with new atexit func. 2019-08-15 18:56:01 +10:00
Paul m. p. P a8e3201b37 py/builtinimport: Populate __file__ when importing frozen or mpy files.
Note that bytecode already includes the source filename as a qstr so there
is no additional memory used by the interning operation here.
2019-07-31 17:00:11 +10:00
Kathryn Lingel 77f177be9c Update tests for new autocomplete behavior 2019-05-06 14:19:07 -07:00
Damien George 906fb89fd7 unix/coverage: Add test for printing literal % character. 2019-05-03 23:21:28 +10:00
Andrew Leech 8977c7eb58 py/scheduler: Convert micropythyon.schedule() to a circular buffer.
This means the schedule operates on a first-in, first-executed manner
rather than the current last-in, first executed.
2019-03-26 16:35:42 +11:00
Damien George a5f5552a0a tests/unix/extra_coverage: Don't test stream objs with NULL write fun.
This behaviour of a NULL write C method on a stream that uses the write
adaptor objects is no longer supported.  It was only ever used by the
coverage build for testing the fail path of mp_get_stream_raise().
2018-06-18 12:35:56 +10:00
Damien George 512f4a6ad1 tests/unix: Add coverage test for uio.resource_stream from frozen str. 2018-03-03 23:58:03 +11:00
Damien George c607b58efe tests: Move heap-realloc-while-locked test from C to Python.
This test for calling gc_realloc() while the GC is locked can be done in
pure Python, so better to do it that way since it can then be tested on
more ports.
2018-03-02 10:59:09 +11:00
Damien George c3f1b22338 tests/unix: Add coverage tests for various GC calls. 2018-03-01 22:49:15 +11:00
Damien George bc12eca461 py/formatfloat: Fix rounding of %f format with edge-case FP values.
Prior to this patch the %f formatting of some FP values could be off by up
to 1, eg '%.0f' % 123 would return "122" (unix x64).  Depending on the FP
precision (single vs double) certain numbers would format correctly, but
others wolud not.  This patch should fix all cases of rounding for %f.
2018-03-01 15:51:03 +11:00
Damien George d3cac18d49 tests/unix: Add coverage test for VM executing invalid bytecode. 2018-02-27 16:18:11 +11:00
Damien George 62be14d77c tests/unix: Add coverage tests for mpz_set_from_float, mpz_mul_inpl.
These new tests cover cases that can't be reached from Python and get
coverage of py/mpz.c to 100%.

These "unreachable from Python" pieces of code could be removed but they
form an integral part of the mpz C API and may be useful for non-Python
usage of mpz.
2018-02-25 23:43:16 +11:00
Damien George 165aab12a3 py/repl: Generalise REPL autocomplete to use qstr probing.
This patch changes the way REPL autocomplete finds matches.  It now probes
the target object for all qstrs via mp_load_method_maybe to look for a
match with the given input string.  Similar to how the builtin dir()
function works, this new algorithm now find all methods and instances of
user-defined classes including attributes of their parent classes.  This
helps a lot at the REPL prompt for user-discovery and to autocomplete names
even for classes that are derived.

The downside is that this new algorithm is slower than the previous one,
and in particular will be slower the more qstrs there are in the system.
But because REPL autocomplete is primarily used in an interactive way it is
not that important to make it fast, as long as it is "fast enough" compared
to human reaction.

On a slow microcontroller (CPU running at 16MHz) the autocomplete time for
a list of 35 names in the outer namespace (pressing tab at a bare prompt)
takes about 160ms with this algorithm, compared to about 40ms for the
previous implementation (this time includes the actual printing of the
names as well).  This time of 160ms is very reasonable especially given the
new functionality of listing all the names.

This patch also decreases code size by:

   bare-arm:    +0
minimal x86:  -128
   unix x64:  -128
unix nanbox:  -224
      stm32:   -88
     cc3200:   -80
    esp8266:   -92
      esp32:   -84
2018-02-19 16:12:44 +11:00
Damien George 923ebe767d tests/unix: Add coverage test for calling mp_obj_new_bytearray. 2018-02-08 11:14:30 +11:00
Damien George e800e4463d tests/unix: Add test for printf with %lx format. 2017-12-19 15:01:17 +11:00
Paul Sokolovsky 9b9dbc5815 py/objtype: Define all special methods if requested.
If MICROPY_PY_ALL_SPECIAL_METHODS is defined, actually define all special
methods (still subject to gating by e.g. MICROPY_PY_REVERSE_SPECIAL_METHODS).

This adds quite a number of qstr's, so should be used sparingly.
2017-10-27 20:06:35 +03:00
Damien George ede8a0235b py/vstr: Raise a RuntimeError if fixed vstr buffer overflows.
Current users of fixed vstr buffers (building file paths) assume that there
is no overflow and do not check for overflow after building the vstr.  This
has the potential to lead to NULL pointer dereferences
(when vstr_null_terminated_str returns NULL because it can't allocate RAM
for the terminating byte) and stat'ing and loading invalid path names (due
to the path being truncated).  The safest and simplest thing to do in these
cases is just raise an exception if a write goes beyond the end of a fixed
vstr buffer, which is what this patch does.  It also simplifies the vstr
code.
2017-09-21 20:29:41 +10:00