dd6e7f5a8a
mimxrt10xx: Add required header for NORETURN definition
2020-09-28 18:56:01 -05:00
726dcdb60a
Add some NORETURN attributes
...
I have a function where it should be impossible to reach the end, so I put in a safe-mode reset at the bottom:
```
int find_unused_slot(void) {
// precondition: you already verified that a slot was available
for (int i=0; i<NUM_SLOTS; i++) {
if( slot_free(i)) {
return i;
}
}
safe_mode_reset(MICROPY_FATAL_ERROR);
}
```
However, the compiler still gave a diagnostic, because safe_mode_reset was not declared NORETURN.
So I started by teaching the compiler that reset_into_safe_mode never returned. This leads at least one level deeper due to reset_cpu needing to be a NORETURN function. Each port is a little different in this area. I also marked reset_to_bootloader as NORETURN.
Additional notes:
* stm32's reset_to_bootloader was not implemented, but now does a bare reset. Most stm32s are not fitted with uf2 bootloaders anyway.
* ditto cxd56
* esp32s2 did not implement reset_cpu at all. I used esp_restart(). (not tested)
* litex did not implement reset_cpu at all. I used reboot_ctrl_write. But notably this is what reset_to_bootloader already did, so one or the other must be incorrect (not tested). reboot_ctrl_write cannot be declared NORETURN, as it returns unless the special value 0xac is written), so a new unreachable forever-loop is added.
* cxd56's reset is via a boardctl() call which can't generically be declared NORETURN, so a new unreacahble "for(;;)" forever-loop is added.
* In several places, NVIC_SystemReset is redeclared with NORETURN applied. This is accepted just fine by gcc. I chose this as preferable to editing the multiple copies of CMSIS headers where it is normally declared.
* the stub safe_mode reset simply aborts. This is used in mpy-cross.
2020-09-28 18:55:56 -05:00
1527a3ce92
Merge remote-tracking branch 'adafruit/main' into add_pwmio
2020-08-24 18:25:18 -07:00
644d2ba7a2
Add more "extern" declarations for gcc10 compat
...
gcc has tightened the restrictions on forward declarations that lack
"extern". Fix them up.
2020-08-21 14:39:37 -05:00
83deea0e03
Fix copy pasta and stub build
2020-08-21 11:17:42 -07:00
a5b01f7361
Merge remote-tracking branch 'adafruit/main' into add_pwmio
2020-08-21 11:13:53 -07:00
6857f98426
Split pulseio.PWMOut into pwmio
...
This gives us better granularity when implementing new ports because
PWMOut is commonly implemented before PulseIn and PulseOut.
Fixes #3211
2020-08-18 13:08:33 -07:00
0fc730bc5a
Expand PulseOut API, debug cleanup
2020-08-14 16:36:02 -04:00
93b373d617
"pop from empty %q"
...
Saves 12 bytes code on trinket m0
2020-08-04 18:42:09 -05:00
c849b781c0
Combine 'index out of range' messages
2020-08-04 14:45:45 -05:00
dddd25a776
Combine similar strings to reduce size of translations
...
This is a slight trade-off with code size, in places where a "_varg"
mp_raise variant is now used. The net savings on trinket_m0 is
just 32 bytes.
It also means that the translation will include the original English
text, and cannot be translated. These are usually names of Python
types such as int, set, or dict or special values such as "inf" or
"Nan".
2020-08-04 13:34:29 -05:00
b6724e843c
update CDC/MIDI bufsize to at least 512 for highspeed port
2020-07-29 16:22:27 +07:00
6063828279
replace USB_MSC_MAX_PACKET_SIZE with USB_HIGHSPEED in descriptor gen tool
2020-07-29 15:38:55 +07:00
778e8bfda9
Changes to optimization option
2020-07-23 19:27:02 -05:00
d83a4ac72d
Changes to add compiler optimization option
2020-07-22 12:44:41 -05:00
49decf90c9
Add option for higher optimization levels
2020-07-21 10:11:08 -05:00
1df48176ce
supervisor: factor supervisor_background_tasks from sundry ports
2020-07-15 11:49:44 -05:00
6160d11c5a
supervisor: factor out, Handle USB via background callback
2020-07-15 11:49:44 -05:00
34b4993d63
Add license to some obvious files.
2020-07-06 19:16:25 +01:00
fcddfd0f39
Merge pull request #3083 from tannewt/esp32s2_busio
...
Add busio support for the ESP32-S2
2020-07-01 21:02:08 -05:00
1d2cc0b968
I2CPeripheral: Rename class and its module
...
This is an incompatible change.
2020-06-25 11:44:19 -05:00
c5fa9730a8
Compiles!
2020-06-24 12:47:59 -07:00
a26102607e
Add UART support
2020-06-24 12:47:58 -07:00
87835c77e8
Merge pull request #3038 from jepler/compute-usb-devices
...
Compute USB_DEVICES instead of requiring it to be specified
2020-06-24 13:31:56 -05:00
f232aef786
supervisor.mk: Compute USB_DEVICES; remove from boards and ports
...
Since Actions passed on the previous commit, where this computed value
was checked against the specified value (if any), this is no net change,
except that we no longer need to specify it for particular boards or
ports.
2020-06-23 12:59:01 -05:00
3f112d28e3
mimxrt10xx: Disable USB MIDI
...
.. it was not in the USB descriptors anyway (lack of enough endpoints?)
2020-06-23 10:57:32 -05:00
a580f0f1c4
_pew: move to common-hal
...
I noticed that this code was referring to samd-specific functionality,
and isn't enabled except in one samd board (pewpew10). Move it.
There is incomplte support for _pew in mimxrt10xx which then caused build
errors; adding a #if guard to check for _pew being enabled fixes it.
The _pew module is not likely to be important on mimxrt but I'll leave the
choice to remove it to someone else.
2020-06-22 10:45:27 -05:00
93cffaa87e
Fix pin macros typo, add extra flash protection
2020-06-05 16:43:08 -04:00
6400113bb9
Merge pull request #3001 from hierophect/mimxrt-teensy-boot
...
mimxrt10xx: Disable pin_reset on 1060 boards
2020-06-05 10:28:53 -07:00
74effeeefd
Add temporary fix warning
2020-06-04 13:30:07 -04:00
c93ccd1e91
Disable pin resets on the 1060
2020-06-03 12:07:08 -04:00
dd5d7c86d2
Fix up end of file and trailing whitespace.
...
This can be enforced by pre-commit, but correct it separately to make it easier to review.
2020-06-03 10:56:35 +01:00
b5b9a56918
Update teensy 4.0/4.1 pin protections
2020-06-02 18:05:59 -04:00
ddcae19254
Merge pull request #2964 from hierophect/mimxrt-busio-cleanup
...
mimxrt10xx: Busio cleanup and bugfixes
2020-05-29 10:42:16 -07:00
fe75c7793c
Fix SWO/Analog overlap, style changes
2020-05-29 12:19:37 -04:00
796373b8be
A number of small ESP32S2 fixes:
...
* Fix flash writes that don't end on a sector boundary. Fixes #2944
* Fix enum incompatibility with IDF.
* Fix printf output so it goes out debug UART.
* Increase stack size to 8k.
* Fix sleep of less than a tick so it doesn't crash.
2020-05-28 15:43:55 -07:00
fd00bb8b7f
Fix pin reset flash conflict error
2020-05-28 12:15:21 -04:00
a59798ed49
Merge branch 'mimxrt-uart-oneway' into mimxrt-busio-cleanup
2020-05-27 12:31:16 -04:00
9f5520135c
translations
2020-05-27 11:54:52 -04:00
a25e10ed59
Merge branch 'mimxrt-uart-oneway' of https://github.com/hierophect/circuitpython into mimxrt-uart-oneway
2020-05-27 11:49:11 -04:00
1e914ac2b0
Change exception text and type
2020-05-27 11:48:52 -04:00
53fb699436
Add pin resetting across boards, fix array size detection issue
2020-05-27 11:45:15 -04:00
ad988013f0
Merge pull request #2961 from arturo182/i2c-exception
...
mimxrt10xx: Change exception type to match other ports
2020-05-27 11:24:46 +02:00
d6c59c4de0
mimxrt10xx: Change exception type to match other ports
2020-05-26 22:36:30 +02:00
d95022f7bb
Merge remote-tracking branch 'upstream/master' into mimxrt-busio-cleanup
2020-05-22 13:33:08 -04:00
fe10a45533
Merge branch 'master' into mimxrt-uart-oneway
2020-05-22 11:32:41 -04:00
75b5142954
Minor style changes and translations
2020-05-22 11:31:52 -04:00
3bb6a32a20
Merge branch 'master' into esp32s2_digitalio
2020-05-21 08:52:39 -07:00
0af5dd59f2
Merge pull request #2898 from hierophect/mimxrt-claiming
...
MIMXRT: Implement pin claiming, pin reset, and pin protections
2020-05-20 11:32:22 -07:00
ba724fffb4
Merge remote-tracking branch 'adafruit/master' into esp32s2_digitalio
2020-05-20 10:48:27 -07:00
66c09efae2
Add UART one-way instance search, fix bugs in stm32 implementation
2020-05-20 12:48:01 -04:00
fd0420d432
Update digitalio api for other ports
2020-05-20 09:23:42 -07:00
916ca9f8a6
Merge pull request #2910 from tannewt/esp32s2
...
Add initial ESP32S2 support
2020-05-19 12:53:23 -07:00
38fd9c25f2
Re-add APA102
2020-05-19 15:33:34 -04:00
b310b04007
Remove pin/port distinction
2020-05-19 14:20:07 -04:00
2acd173e14
Implement core requested changes
2020-05-19 13:54:47 -04:00
2c2b53303d
Merge pull request #2837 from k0d/serial-debug
...
Add support for a debug console, such as ST-Link VCP.
2020-05-18 18:13:31 -07:00
007c92ee6a
Enable showing the console on a debug uart
2020-05-19 02:02:52 +02:00
cf690bd390
Merge remote-tracking branch 'adafruit/master' into esp32s2
2020-05-18 16:46:41 -07:00
32617d5f2f
Merge pull request #2925 from arturo182/imx-spi
...
mimxrt1010: Increase max SPI speed
2020-05-18 15:22:42 -07:00
058a73128c
mimxrt10xx: Fix cpu.temperature crash
...
Fixes #2514
2020-05-18 22:30:50 +02:00
f92d53eaab
mimxrt1010: Increase max SPI speed
2020-05-18 22:07:38 +02:00
3c1469b0a5
Add port_fixed_stack for more builds
2020-05-15 16:22:33 -07:00
99538c2414
Implement pin claiming, pin reset, and pin protections
2020-05-15 15:16:51 -04:00
ee2cb703c8
merged master
2020-05-12 14:41:28 +10:00
61450cbd56
Add Teensy 4.1 board definition
2020-05-11 13:58:58 -07:00
4519ddebeb
Merge pull request #2841 from hierophect/mimxrt-spi-oneway
...
mimxrt10xx: add one-directional SPI
2020-05-06 08:32:21 -07:00
a1330747e8
text fixes, postpone warning disable
2020-05-05 12:46:30 -04:00
bfa5cd9c13
refactor countio based on feedback
2020-05-05 15:23:38 +10:00
bae7a5e433
make translate again
2020-05-04 17:26:59 -04:00
bc581fbdfb
Add-unidirectional-SPI
2020-05-01 13:15:38 -04:00
180f5c6a94
Merge remote-tracking branch 'adafruit/master' into ringbuf-fixes
2020-04-29 22:11:22 -04:00
755d404edf
Merge remote-tracking branch 'adafruit/master' into lower_power
2020-04-27 16:45:10 -07:00
faa50df05f
Merge pull request #2817 from jepler/stm-linker-scripts
...
Standardize on FLASH_FIRMWARE section name in linker scripts
2020-04-27 18:43:26 -04:00
7eff89e9f9
linker scripts: Re-align at ":"
...
With "git show -b" you can verify that this is a whitespace only change
because the diff will be empty.
2020-04-27 12:47:52 -05:00
808b456927
mimxrt10xx: Use FLASH_FIRMWARE instead of FLASH_TEXT in linker scripts
...
for compatibility with the build_memory_info script
This change was scripted:
git grep -l FLASH_TEXT | xargs sed -i s/FLASH_TEXT/FLASH_FIRMWARE/
2020-04-27 08:07:47 -05:00
fbc8719fad
ringbuf tested
2020-04-21 22:40:12 -04:00
38ec3bc574
further ringbuf cleanup
2020-04-21 17:38:20 -04:00
bebf27e733
Merge remote-tracking branch 'adafruit/master' into lower_power
...
This isn't perfect and needs a bit more testing.
2020-04-20 18:25:13 -07:00
7e3d4c61b5
Update TinyUSB and add interrupt hooks.
2020-04-17 14:16:49 -07:00
54abfc2e8b
translations-merge
2020-04-15 10:29:05 -04:00
b580b34cbf
Merge remote-tracking branch 'adafruit/master' into lower_power
2020-04-14 17:14:44 -07:00
db01f88cc3
enable MICROPY_PY_REVERSE_SPECIAL_METHODS where ulab is enabled
2020-04-13 19:58:52 -05:00
6227e63cc5
Merge remote-tracking branch 'upstream/master' into stm32x7-setup
2020-04-13 12:03:56 -04:00
6544bf52fb
Enable SNVS interrupt
...
The iMX RT has a separate wake up controller, the GPC, that replaces
the NVIC when asleep. It adds the ability to only wake up on certain
interrupts. It seems that it requires at least one enabled interrupt
in the NVIC to turn on it's wake up circuitry. It doesn't need to
be the same interrupt as the wake up signal. For example, the RTC
in the SNVS can wake us up if a USB interrupt is enabled. Before
then it won't work. So, we enable the SNVS interrupt on start up
so it can wake us up.
2020-04-07 17:15:18 -07:00
aae0ce6bad
Fix autoreload and ticks on IMX RT
2020-04-07 14:16:07 -07:00
a8dfba235c
Fix alarm so that it is correctly set.
2020-04-07 13:07:29 -07:00
08f369ea96
mimxrt1011: Only re-init SPI when it's actually needed
...
If some crazy code (*cough* FourWire) decides to reconfigure the bus
before every transfer, it might get a bit slow...
2020-04-06 22:10:12 +02:00
47a5d83267
Implement F7 Nucleo
2020-04-02 11:47:16 -04:00
2f764ded63
merge and docs
2020-04-01 13:52:53 -04:00
317b96e93a
Fix iMX builds
2020-03-31 17:00:30 -07:00
8fe512c7e9
Merge remote-tracking branch 'adafruit/master' into lower_power
2020-03-31 15:13:58 -07:00
13022be299
mimxrt10xx: Fix neopixel_write
2020-03-31 01:05:03 +02:00
a4a458943d
Correct MIMXRT sdk version
2020-03-27 15:40:17 -07:00
798118b74f
Update board.c's to remove remaining tick.h
2020-03-27 14:52:35 -07:00
e4c4a4a3de
Swap to committed dependencies
2020-03-27 14:39:59 -07:00
18c12e7822
mimxrt10xx: Return proper UART read length when everything was read
2020-03-26 00:15:48 +01:00
5e1e4d32db
Get basic sleep going on the iMX RT 1011
2020-03-24 15:46:10 -07:00
a8ed6d993c
Switch iMX RT to RTC. Untested.
2020-03-23 18:20:58 -07:00
b6206406de
new pin validation routines; don't use mp_const_none if NULL will do
2020-02-28 23:43:04 -05:00
0af00cf914
Freeze adafruit_requests and adafruit_esp32spi into feather_m7_1011
2020-02-29 00:39:22 +01:00
3f26a0b06b
Freeze adafruit_requests and adafruit_esp32spi into feather_mimxrt1011
2020-02-29 00:26:39 +01:00
09a3153bf4
Fix I2C clock divider
2020-02-27 14:08:39 +00:00
aadb0bfc1e
Fix SPI clock speed on mimxrt10xx family & mimxrt1020 pinmux fixup
2020-02-26 14:28:54 +00:00
1e7ec1b952
Merge pull request #2641 from arturo182/feather_m7_1011
...
mimxrt10xx: Add Feather M7 1011 board config
2020-02-20 10:15:57 -08:00
feac87901a
mimxrt10xx: Enable displayio
...
Closes #2466
2020-02-19 22:26:00 +01:00
aa0cf38084
mimxrt10xx: Add Feather M7 1011 board config
2020-02-19 22:08:08 +01:00
24405cabaf
Edits as a result of review
2020-02-19 00:07:01 +00:00
f0e5341b0f
Addition of support for imxt1010, 1050 and 1060 families
2020-02-18 23:16:40 +00:00
d388899985
Addition of RS485 support
2020-02-18 23:16:40 +00:00
84ad3d8393
Addition of RTS/CTS/RS485 UART functionality
2020-02-18 23:16:40 +00:00
2063867899
Merge pull request #2618 from mubes/alignment-warning
...
Fix alignment warning
2020-02-18 13:54:24 -08:00
77ad9aff3c
Formatting updates
2020-02-16 00:40:04 +00:00
d13f04f953
Updated formatting
2020-02-14 23:02:02 +00:00
4de2a1eb62
Fix alignment warning
2020-02-12 22:36:34 +00:00
d0870ce484
Update main .bin output file to be bootable artefact
2020-02-12 09:03:11 +00:00
f3e4fbd7ba
Add directly loadable binary target
2020-02-11 23:01:08 +00:00
005c4caf8c
fix function defs for compiler
2020-02-07 10:32:37 -05:00
857d8ab40a
improve time.monotonic_ns() accuracy from ms to us
2020-02-07 10:02:50 -05:00
898f4e1f72
Merge branch 'master' into stm32-meowbit
2020-01-29 16:32:08 -05:00
100409961a
Move board_init to main.c
2020-01-29 16:29:43 -05:00
085242bf5c
Use new USB PIDs that aren't used yet.
2020-01-21 18:45:00 -08:00
87344ff53a
Disable the DCache when USB is initialized. There are still issues enabling it.
2020-01-21 18:32:19 -08:00
1c39606345
Fix other builds missing new heap bounds functions
2020-01-18 18:06:56 -08:00
9d5742ebd1
Fix start on power up by providing Reset_Handler ourselves.
...
On power up the FlexRAM banks are in an unknown config so we can't
rely on the stack until after we configure FlexRAM.
2020-01-18 11:54:01 -08:00
9f4ea2122a
teensy fixes
2020-01-17 18:35:09 -08:00
7d8dac9211
Refine iMX RT memory layout and add three boards
...
Introduces a way to place CircuitPython code and data into
tightly coupled memory (TCM) which is accessible by the CPU in a
single cycle. It also frees up room in the corresponding cache for
intermittent data. Loading from external flash is slow!
The data cache is also now enabled.
Adds support for the iMX RT 1021 chip. Adds three new boards:
* iMX RT 1020 EVK
* iMX RT 1060 EVK
* Teensy 4.0
Related to #2492 , #2472 and #2477 . Fixes #2475 .
2020-01-17 17:36:08 -08:00
69785cccfe
mimxrt1011: Fix pin definition
2020-01-17 14:45:29 +01:00
360c876be4
add flag to i.mx port
2020-01-10 09:20:21 -05:00
cc7b57c8d4
mimxrt10xx: Add license for NXP code
2020-01-07 22:07:27 +01:00
19803c664f
mimxrt10xx: Add info on clock config source
2020-01-07 20:05:57 +01:00
ff6d9d8a52
mimxrt10xx: Use the correct error for not implemented functionality
...
Co-Authored-By: Scott Shawcroft <scott@tannewt.org>
2020-01-07 09:29:47 +01:00
13e0cba6f1
Add initial MIMXRT10XX port
2020-01-06 21:08:49 +01:00
Jeff Epler
Scott Shawcroft
Lucian Copeland
hathach
root
Diego Elio Pettenò
Jeff Epler
Jeff Epler
Scott Shawcroft
arturo182
Mark Olsson
Daniel Pollard
Dan Halbert
Dan Halbert
Dave Marples