Commit Graph

84 Commits

Author SHA1 Message Date
Damien George 4747becc64 py: Improve encoding scheme for line-number to bytecode map.
Reduces by about a factor of 10 on average the amount of RAM needed to
store the line-number to bytecode map in the bytecode prelude.

Using CPython3.4's stdlib for statistics: previously, an average of
13 bytes were used per (bytecode offset, line-number offset) pair, and
now with this improvement, that's down to 1.3 bytes on average.

Large RAM usage before was due to some very large steps in line numbers,
both from the start of the first line in a function way down in the
file, and also functions that have big comments and/or big strings in
them (both cases were significant).

Although the savings are large on average for the CPython stdlib, it
won't have such a big effect for small scripts used in embedded
programming.

Addresses issue #648.
2014-07-31 16:12:01 +00:00
Paul Sokolovsky 58c9586c34 emitbc: Fix structure field alignment issue.
dummy_data field is accessed as uint value (e.g.
in emit_write_bytecode_byte_ptr), but is not aligned as such, which causes
bus errors or incorrect behavior on any arch requiring strictly aligned
data (ARM pre-v7, MIPS, etc, etc).
2014-07-12 15:57:28 +03:00
Damien George 40f3c02682 Rename machine_(u)int_t to mp_(u)int_t.
See discussion in issue #50.
2014-07-03 13:25:24 +01:00
Damien George b601d9574a py: Improvements to native emitter.
Native emitter can now compile try/except blocks using nlr_push/nlr_pop.
It probably only works for 1 level of exception handling.  It doesn't
work on Thumb (only x64).

Native emitter can also handle some additional op codes.

With this patch, 198 tests now pass using "-X emit=native" option to
micropython.
2014-06-30 05:17:25 +01:00
Paul Sokolovsky 59c675a64c py: Include mpconfig.h before all other includes.
It defines types used by all other headers.

Fixes #691.
2014-06-21 22:43:22 +03:00
Paul Sokolovsky b8f117dd32 py: For optimization level -O3 and higher, remove lineno info from bytecode. 2014-06-03 12:32:59 +03:00
Damien George 25c84643b6 py: Fix break from within a for loop.
Needed to pop the iterator object when breaking out of a for loop.  Need
also to be careful to unwind exception handler before popping iterator.

Addresses issue #635.
2014-05-30 15:20:41 +01:00
Damien George 0fb80c303a py: Compress a little the bytecode emitter structure. 2014-05-10 18:16:21 +01:00
Damien George 9597771fe4 py, emitters: Fix dummy_data size for bytecode and thumb.
Thumb uses a bit less RAM, bytecode uses a tiny bit more, to avoid
overflow of the dummy buffer in certain cases.

Addresses issue #599.
2014-05-10 18:07:08 +01:00
Damien George 3417bc2f25 py: Rename byte_code to bytecode everywhere.
bytecode is the more widely used.  See issue #590.
2014-05-10 10:36:38 +01:00
Damien George 36db6bcf54 py, compiler: Improve passes; add an extra pass for native emitter. 2014-05-07 17:24:22 +01:00
Damien George 04b9147e15 Add license header to (almost) all files.
Blanket wide to all .c and .h files.  Some files originating from ST are
difficult to deal with (license wise) so it was left out of those.

Also merged modpyb.h, modos.h, modstm.h and modtime.h in stmhal/.
2014-05-03 23:27:38 +01:00
Damien George 968bf34c4c py: Remove unnecessary LOAD_CONST_ID bytecode.
It's the same as LOAD_CONST_STR.
2014-04-27 19:12:05 +01:00
Damien George 2827d62e8b py: Implement keyword-only args.
Implements 'def f(*, a)' and 'def f(*a, b)', but not default
keyword-only args, eg 'def f(*, a=1)'.

Partially addresses issue #524.
2014-04-27 15:50:52 +01:00
Damien George 5f6a25fc50 py: Wrap #if's around emitter functions that are used only by emitcpy.
3 emitter functions are needed only for emitcpy, and so we can #if them
out when compiling with emitcpy support.

Also remove unused SETUP_LOOP bytecode.
2014-04-20 18:02:27 +01:00
Damien George 3558f62fb5 py: Making closures now passes pointer to stack, not a tuple for vars.
Closed over variables are now passed on the stack, instead of creating a
tuple and passing that.  This way memory for the closed over variables
can be allocated within the closure object itself.  See issue #510 for
background.
2014-04-20 17:50:40 +01:00
Damien George 729f7b42d6 py: Merge BINARY_OP_SUBSCR and store_subscr (w/ delete) into subscr.
mp_obj_t->subscr now does load/store/delete.
2014-04-17 22:10:53 +01:00
Damien George 73496fbbe4 py: Fix up source-line calculation.
Should address issue #475.
2014-04-13 14:51:56 +01:00
Damien George df8127a17e py: Remove unique_codes from emitglue.c. Replace with pointers.
Attempt to address issue #386.  unique_code_id's have been removed and
replaced with a pointer to the "raw code" information.  This pointer is
stored in the actual byte code (aligned, so the GC can trace it), so
that raw code (ie byte code, native code and inline assembler) is kept
only for as long as it is needed.  In memory it's now like a tree: the
outer module's byte code points directly to its children's raw code.  So
when the outer code gets freed, if there are no remaining functions that
need the raw code, then the children's code gets freed as well.

This is pretty much like CPython does it, except that CPython stores
indexes in the byte code rather than machine pointers.  These indices
index the per-function constant table in order to find the relevant
code.
2014-04-13 11:04:33 +01:00
Damien George 6ce4277551 py: Make all LOAD_FAST ops check for unbound local.
This is necessary to catch all cases where locals are referenced before
assignment.  We still keep the _0, _1, _2 versions of LOAD_FAST to help
reduced the byte code size in RAM.

Addresses issue #457.
2014-04-12 18:20:40 +01:00
Damien George 69b89d21b2 py: Change compile order for default positional and keyword args.
This simplifies the compiler a little, since now it can do 1 pass over
a function declaration, to determine default arguments.  I would have
done this originally, but CPython 3.3 somehow had the default keyword
args compiled before the default position args (even though they appear
in the other order in the text of the script), and I thought it was
important to have the same order of execution when evaluating default
arguments.  CPython 3.4 has changed the order to the more obvious one,
so we can also change.
2014-04-11 13:38:30 +00:00
Damien George d66ae18640 py: Simplify stack get/set to become stack adjust in emitters.
Can do this now that the stack size calculation is improved.
2014-04-10 17:28:54 +00:00
Damien George 069a35e3a5 py, compiler: Improve stack depth counting.
Much less of a hack now.  Hopefully it's correct!
2014-04-10 17:22:19 +00:00
Damien George 190d1ba297 py: Make sure state/stack of byte code function has at least 1 slot. 2014-04-10 16:59:56 +00:00
Damien George 6f355fd3b9 py: Make labels unsigned ints (converted from int).
Labels should never be negative, and this modified type signature
reflects that.
2014-04-10 14:11:31 +01:00
Damien George 2bf7c09222 py: Properly implement deletion of locals and derefs, and detect errors.
Needed to reinstate 2 delete opcodes, to specifically check that a local
is not deleted twice.
2014-04-09 15:26:46 +01:00
Damien George 922ddd6415 py, compile: Combine have_star_arg, have_dbl_star_arg into star_flags.
Small reduction in ROM, heap and stack usage.
2014-04-09 12:43:17 +01:00
Damien George 78035b995f py, compiler: Clean up and compress scope/compile structures.
Convert int types to uint where sensible, and then to uint8_t or
uint16_t where possible to reduce RAM usage.
2014-04-09 12:27:39 +01:00
Damien George f4c9b33abf py: Remove DELETE_SUBSCR opcode, combine with STORE_SUBSCR.
This makes the runtime and object APIs more consistent.  mp_store_subscr
functionality now moved into objects (ie list and dict store_item).
2014-04-08 21:32:29 +01:00
Damien George 1d24ea5207 py: Finish implementation of all del opcodes.
At this point, all opcodes are now implemented!

Some del opcodes have been combined with store opcodes, with the value
to store being MP_OBJ_NULL.
2014-04-08 21:11:49 +01:00
Damien George 882b363564 py: Move to Python 3.4.0 compatibility.
Very little has changed.  In Python 3.4 they removed the opcode
STORE_LOCALS, but in Micro Python we only ever used this for CPython
compatibility, so it was a trivial thing to remove.  It also allowed to
clean up some dead code (eg the 0xdeadbeef in class construction), and
now class builders use 1 less stack word.

Python 3.4.0 introduced the LOAD_CLASSDEREF opcode, which I have not
yet understood.  Still, all tests (apart from bytecode test) still pass.
Bytecode tests needs some more attention, but they are not that
important anymore.
2014-04-02 15:56:31 +01:00
Damien George e337f1ef5e py: Towards default keyword arguments.
These are default arguments after a bare *.
2014-03-31 15:18:37 +01:00
Damien George 523b575039 py: Add LOAD_NULL bytecode and use it to simplify function calls.
Adding this bytecode allows to remove 4 others related to
function/method calls with * and ** support.  Will also help with
bytecodes that make functions/closures with default positional and
keyword args.
2014-03-31 11:59:23 +01:00
Damien George 3056509e00 py: Rename and reorder parameters in emit_make_function/closure.
In preparation for implementing default keyword arguments.
2014-03-31 11:30:17 +01:00
Damien George d17926db71 Rename rt_* to mp_*.
Mostly just a global search and replace.  Except rt_is_true which
becomes mp_obj_is_true.

Still would like to tidy up some of the names, but this will do for now.
2014-03-30 13:35:08 +01:00
Damien George ce8f07adcd py: Rename emit_pre so they have globally unique names. 2014-03-27 23:30:26 +00:00
Damien George 2326d52d20 py: Factor out code from runtime.c to emitglue.c. 2014-03-27 23:26:35 +00:00
Damien George bee17b00e3 py: Put n_state for bytecode in the bytecode prelude.
Rationale: setting up the stack (state for locals and exceptions) is
really part of the "code", it's the prelude of the function.  For
example, native code adjusts the stack pointer on entry to the function.
Native code doesn't need to know n_state for any other reason.  So
putting the state size in the bytecode prelude is sensible.

It reduced ROM usage on STM by about 30 bytes :)  And makes it easier to
pass information about the bytecode between functions.
2014-03-27 11:07:04 +00:00
Damien George 8dcc0c7924 py: Calculate maximum exception stack size in compiler. 2014-03-27 10:55:21 +00:00
Paul Sokolovsky 2447a5b582 py: Support closures with default args. 2014-03-26 23:17:44 +02:00
xbe efe3422394 py: Clean up includes.
Remove unnecessary includes. Add includes that improve portability.
2014-03-17 02:43:40 -07:00
Paul Sokolovsky a8d31b28bc emitbc: Correct buffer sizes for varlen int encoding.
Assuming we have truncating (floor) division, way to do ceiling division
by N is to use formula (x + (N-1)) / N. Specifically, 63 bits, if stored
7 bits per byte, require exactly 9 bytes. 64 bits overflow that and require
10 bytes.
2014-02-20 13:25:05 +02:00
Paul Sokolovsky 047cd40313 Bytecode int varlen encoding: support arbitrary values for signed ints too. 2014-02-19 15:53:41 +02:00
Paul Sokolovsky 0f96ec8268 Bytecode uint varlen encoding: support arbitrary values. 2014-02-19 15:52:57 +02:00
Paul Sokolovsky ac2e28c654 Support passing positional args as keywords to bytecode functions.
For this, record argument names along with each bytecode function. The code
still includes extensive debug logging support so far.
2014-02-16 18:36:33 +02:00
Damien George 8725f8f7de py: Pass all scope flags through to runtime. 2014-02-15 19:33:11 +00:00
Paul Sokolovsky 520e2f58a5 Replace global "static" -> "STATIC", to allow "analysis builds". Part 2. 2014-02-12 18:31:30 +02:00
Damien George 9aa2a527b5 py: Tidy up BINARY_OPs; negation done by special NOT bytecode.
IS_NOT and NOT_IN are now compiled to IS + NOT and IN + NOT, with a new
special NOT bytecode.
2014-02-01 23:04:09 +00:00
Damien George cbddb279bb py: Implement break/continue from an exception with finally.
Still todo: break/continue from within the finally block itself.
2014-02-01 20:08:18 +00:00
Damien George fb083ea986 py: mp_execute_byte_code has 2 arg arrays, for more efficient default params. 2014-02-01 18:29:40 +00:00