Dan Halbert
4cb69a51d5
Use MP_WEAK for default board.c routines
2022-09-08 07:36:50 -04:00
Chris Osterwood
7247990c3e
Update pins.c
...
Fix typo
2022-02-09 14:26:20 -05:00
Chris Osterwood
8e3f719056
Update mpconfigboard.mk
...
Add build flags to turn off subsystems which are not relevant to the USB Hub
2022-02-09 13:54:08 -05:00
Chris Osterwood
4c371db5b2
Update pins.c
...
Adds a pin which is used by recent firmware for PCB hardware identification.
2022-02-09 13:53:19 -05:00
Neradoc
b2c8fd3938
add board.STEMMA_I2C alias to some boards
2022-02-02 01:18:46 +01:00
Dan Halbert
57c33059f3
board_deinit() everywhere
2021-11-30 11:00:10 -05:00
Neradoc
8625e53817
change board dicts to include a common macro with __name__
2021-09-03 21:03:55 +02:00
Neradoc
4d05bb26bf
change board.ID to board.board_id
2021-08-26 23:11:55 +02:00
Neradoc
b14b294516
add board.ID
2021-08-26 23:11:55 +02:00
Scott Shawcroft
ca2cb9af2b
Remove MICROPY_PORT_* macros used for never reset
...
Now we use never_reset which is generally more correct and easier
to get right.
Fixes #5001 and fixes #4997
2021-07-15 16:20:04 -07:00
Scott Shawcroft
aec0ef3cbf
Switch devices.h to nvm.toml data
2021-03-25 09:57:18 -07:00
Jeff Epler
f1ada8e880
Automatically count EXTERNAL_FLASH_DEVICES
2021-03-07 11:48:39 -06:00
Scott Shawcroft
40118bcf57
Add board_deinit for use with sleep
...
This changes lots of files to unify `board.h` across ports. It adds
`board_deinit` when CIRCUITPY_ALARM is set. `main.c` uses it to
deinit the board before deep sleeping (even when pretending.)
Deep sleep is now a two step process for the port. First, the
port should prepare to deep sleep based on the given alarms. It
should set alarms for both deep and pretend sleep. In particular,
the pretend versions should be set immediately so that we don't
miss an alarm as we shutdown. These alarms should also wake from
`port_idle_until_interrupt` which is used when pretending to deep
sleep.
Second, when real deep sleeping, `alarm_enter_deep_sleep` is called.
The port should set any alarms it didn't during prepare based on
data it saved internally during prepare.
ESP32-S2 sleep is a bit reorganized to locate more logic with
TimeAlarm. This will help it scale to more alarm types.
Fixes #3786
2020-12-08 10:52:25 -08:00
Diego Elio Pettenò
dd5d7c86d2
Fix up end of file and trailing whitespace.
...
This can be enforced by pre-commit, but correct it separately to make it easier to review.
2020-06-03 10:56:35 +01:00
Chris Osterwood
97420994e8
Merge remote-tracking branch 'origin/master' into capablerobot-usbhub
2020-01-20 13:11:57 -05:00
Dan Halbert
7b79ac3739
Parameterize linker script
2019-10-20 23:50:12 -04:00
Chris Osterwood
137a4f8a5d
Added new flash SKU for production hardware
2019-10-07 14:50:39 -04:00
Dan Halbert
e2a4c76a37
make nrf touchio be generic: now available for SAMD51 too
2019-08-18 08:44:10 -04:00
Chris Osterwood
d5658860aa
Added pin definition for battery change enable. Pin used to switch in a 10 ohm resistor during Hub reset & strapping.
2019-08-08 14:39:50 -04:00
Chris Osterwood
fb2712410e
Merge branch 'master' into capablerobot-usbhub
2019-08-08 14:14:23 -04:00
Chris Osterwood
97e7fea517
Change pin names to be more descriptive
2019-07-04 13:23:57 -04:00
Chris Osterwood
539502c891
Remove pin reservations. Prevents used from inside of CircuitPython code
2019-07-04 13:22:36 -04:00
Dan Halbert
1bb4fccc3b
Turn off SUPEROPT on gc.c instead of trying to squueze inline limit so much; reorganize mpconfigboard.mk files
2019-06-12 11:08:22 -04:00
Chris Osterwood
a0497553fc
Fix to prevent critical pins from being reset when MCU restarts or enters REPL
2019-05-14 15:23:33 -04:00
Chris Osterwood
420dbafa9d
Added board definition for Capable Robot Programmable USB Hub
2019-05-14 13:28:24 -04:00
