644d293641
Fix CIRCUITPY drive offset in flash correctly, accounting for NVM
...
.. and fix nvm to read/right the correct area.
.. putting a comment in link.ld to explain it all
Closes #7012
2022-10-06 12:39:46 -05:00
07cd2ff065
restore 4kB gap pending resolution of #7011
2022-10-06 11:20:48 -05:00
6e2c24083a
switch flash split to leave 512kB for CIRCUITPY
2022-10-06 10:12:22 -05:00
2dc283f578
close underlying socket object when closing ssl socket
2022-10-05 15:10:14 -05:00
4a9389d347
remove debug message
2022-10-05 14:57:04 -05:00
14f2309b6f
Enable more key exchange methods
...
This is intended (but not entirely verified) to match our esp32 builds.
It does fix accessing https://circuitpython.org , which failed before with
"MBEDTLS_ERR_SSL_FATAL_ALERT_MESSAGE".
It still doesn't work on a personal website of mine with valid letsencrypt
certificate but I haven't verified whether it works on esp32s2 with CP.
That site only allows TLS 1.3, while this mbedtls only supports up to
1.2.
The version of mbedtls we adopted based on micropython's use has no
TLS 1.3 support, but the one in espressif esp-idf does.
2022-10-05 14:56:27 -05:00
fabfdcf6fe
More ssl work
2022-10-05 14:56:26 -05:00
944d388158
copy esp_crt_bundle.c from esp-idf@d51f7d8821
2022-10-05 14:56:26 -05:00
dcb650c513
pico w: add ssl module
...
Note: at this time, the ssl module on pico_w never verifies the server
certificate. This means it does not actually provide a higher security
level than regular socket / http protocols.
2022-10-05 13:12:43 -04:00
2bd50673b6
Finish adapting flash storage size
...
Before this, CIRCUITPY would start at 1MB anyway. This appeared to work
only because I hadn't checked the actual size of the CIRCUITPY drive,
and because until now the flash hadn't actually crossed that 1MB
boundary into CIRCUITPY storage.
WARNING: on pico_w, upgrading/downgrading CircuitPython across this commit
boundary will erase the CIRCUITPY filesystem. After this commit,
switching between pico and pico_w firmware will erase the CIRCUITPY
filesystem
2022-10-05 10:02:38 -05:00
ad79f595a5
Merge pull request #6974 from MicroDev1/patch
...
Couple Minor Fixes
2022-10-01 13:12:01 -04:00
7bb90dbf45
remove redundant port/*/.gitignore; cleanup others
2022-10-01 11:52:36 -04:00
40c2de833d
doc improvements
2022-10-01 10:09:33 -05:00
d3e85d165e
Set cyw43 power management as needed, default to disabled
...
.. the value actually needs to be enforced each time the STA or AP
is enabled, because internally there's a call to cyw43_wifi_pm with the
library's defaut power management value, not ours.
Add a getter, though it only returns our idea of what the power
management register is set to, it doesn't read out from the actual
hardware, sadly.
2022-10-01 08:20:34 -05:00
943b992bfc
Improve cyw43.set_power_management documentation
...
.. and provide 4 preset values
2022-10-01 07:52:08 -05:00
bced76887e
Merge pull request #6973 from jepler/rp2040-fix-warnings
...
Rp2040 fix warnings
2022-09-30 16:21:31 -04:00
c02602ace1
Enable strict-overflow diagnostic
2022-09-30 11:19:23 -05:00
afc1c0e3bb
Fix unused variable diagnostics, make it a fatal error
2022-09-30 11:19:22 -05:00
37620d4eb0
Fix several classes of compiler diagnostic & make fatal
...
* -Wno-nested-externs
* -Wno-strict-prototypes
* -Wno-double-promotion
* -Wno-sign-compare
2022-09-30 11:19:22 -05:00
c6eef3931f
Enable warning for unused static functions
2022-09-30 11:19:22 -05:00
2c9c6fc80e
Remove unused static functions
2022-09-30 11:19:21 -05:00
907c5d387f
Tweak black_bindings
...
Originally, black_bindings found each contiguous "//|" block and sent
it to black independently. This was slower than it needed to be.
Instead, swap the comment prefix: when running black, take off
"//|" prefixes and put "##|" prefixes on all un-prefixed lines.
Then, after black is run, do the opposite operation
This more than doubles the overall speed of "pre-commit run --all",
from 3m20s to 55s CPU time on my local machine (32.5s to under 10s
"elapsed" time)
It also causes a small amount of churn in the bindings, because
black now sees enough context to know whether one 'def' follows another
or ends the 'def's in a 'class'. In the latter case, it adds an extra
newline, which becomes a "//|" line.
I'm less sure why a trailing comma was omitted before down in
rp2pio/StateMachine.c but let's roll with it.
2022-09-30 11:18:13 -05:00
0912889106
raspberrypi: statically allocate storage for hostname
2022-09-30 10:05:11 -05:00
84c7ac4a81
Make cyw43.set_power_management() be a function as intended
2022-09-30 07:56:59 -05:00
3281e14be1
fix reference to board module
2022-09-29 21:37:34 -05:00
4de9487820
It turns out you CAN have too many GPIO
2022-09-29 20:10:33 -05:00
510bd11f58
Enable reading back value of cyw43 pin
...
Now, `led.value = not led.value` works as a way to toggle the LED state.
Closes : #6959
2022-09-29 11:06:11 -05:00
a3bcfd6911
Add pin_CYW1 for SMPS_MODE
2022-09-29 10:54:06 -05:00
72b06021c0
fix doc formatting
2022-09-29 10:27:13 -05:00
74cdf42ece
pico w: implement bind, listen, accept
...
this works with some simple tcp & udp echo service code
2022-09-29 10:02:20 -05:00
12ea04ca70
Add cyw43.set_power_management
2022-09-29 10:02:20 -05:00
91f1266db5
Document CywPin
2022-09-29 10:02:19 -05:00
56f9f0d136
add tx power get/set
2022-09-29 10:02:19 -05:00
71a00157ba
Add hostname setting
2022-09-29 10:02:19 -05:00
c6d3163841
remove comment about something the Makefile does now
2022-09-29 10:02:18 -05:00
db065a299f
Merge pull request #6933 from jepler/ 🥧 🐮
...
Implement a useful subset of `wifi` and `socketpool` modules on 🥧 🐮
2022-09-28 18:09:24 -04:00
2dd6df9d93
better to explain why this file has no useful content
2022-09-28 15:19:06 -05:00
3d76aa00f5
implementations not needed
2022-09-28 14:38:13 -05:00
09d4fbc557
Remove FIXME
...
this was verbatim-copied from micropython
2022-09-28 14:38:13 -05:00
6189156a0b
Add missing NotImplementedErrors
2022-09-28 14:38:12 -05:00
edf1efd728
Add CYW43 guards to more things
2022-09-28 14:38:12 -05:00
e100981d90
revert CFLAGS change
2022-09-28 14:38:12 -05:00
4380292848
comment why not actually reset wifi
2022-09-28 14:38:11 -05:00
ff7731491e
Implement enough of socketpool to do ntp and non-https requests
2022-09-28 10:06:34 -05:00
a7a1bd7880
Implement DNS resolution
...
```
>>> s = socketpool.SocketPool(wifi.radio)
>>> s.getaddrinfo("google.com", 80)
[(0, 0, 0, '', ('142.250.81.206', 80))]
```
2022-09-28 10:06:33 -05:00
6c3cdceb45
Implement scan, connect, ping
...
My pings go out, and then they come back
```py
import os
import wifi
import ipaddress
wifi.radio.connect(os.getenv('WIFI_SSID'), os.getenv('WIFI_PASSWORD'))
ipv4 = ipaddress.ip_address("8.8.4.4")
print("Ping google.com: %f ms" % (wifi.radio.ping(ipv4)*1000))
```
2022-09-28 10:06:33 -05:00
346fff2e7c
cyw43 basic gpio support, hwaddr in boot_out
2022-09-28 10:06:33 -05:00
22b04aef22
Reindent a block
2022-09-28 10:05:53 -05:00
9caa65cf28
allow a board to override link.ld
2022-09-28 10:05:53 -05:00
b2cc8d2aad
run black_bindings across all bindings
2022-09-27 15:21:42 -05:00
4e96667d50
Manual fix for oddball cases
2022-09-27 15:19:32 -05:00
de80db681f
Merge pull request #6915 from dhalbert/ringbuf-cleanup
...
ringbuf cleanup
2022-09-25 17:50:21 -04:00
5346b89b08
don't use @property in docs, just document as a property
2022-09-25 07:18:18 +02:00
ea15a9118a
ringbuf cleanup
2022-09-21 10:03:05 -04:00
8a568d18b5
Merge pull request #6757 from latkinso42/adcdma
...
analogbufio
2022-09-16 08:32:24 -04:00
82694b7265
remove extraneous copyrights
2022-09-15 20:31:08 -04:00
60f43b1703
allow preserving pin state during deep sleep
2022-09-15 17:35:14 -04:00
f279a2dbb2
Merge branch 'adafruit:main' into adcdma
2022-09-08 11:46:01 -04:00
58b00467c4
Merge pull request #6878 from dhalbert/weak-board-defs
...
Use MP_WEAK for default board.c routines
2022-09-08 10:47:08 -04:00
4cb69a51d5
Use MP_WEAK for default board.c routines
2022-09-08 07:36:50 -04:00
c1f57c6ceb
Pushing for resolution
2022-09-07 18:53:35 -04:00
25078a24a3
Attempt to fix Build-Docs and Pre-Commit
2022-09-06 18:58:57 -04:00
c043c437f7
Merge branch 'main' of https://github.com/PontusO/circuitpython
2022-09-06 09:37:25 +02:00
9a937e6ea3
Added challenger_rp2040_wifi_ble board.
2022-09-06 09:37:21 +02:00
5498b3ac91
fix to analogbufio BufferedIn.h
2022-09-05 14:22:08 -04:00
a09836eb4a
Merge pull request #6681 from PontusO/main
...
Adds support for the Challenger RP2040 SubGHz board
2022-09-05 10:01:51 -07:00
a1856ea3e9
Renaming module from adcbuffer to analogbufio
2022-09-05 12:11:49 -04:00
478b40ecf9
Merge branch 'adcdma' of https://github.com/latkinso42/circuitpython into adcdma
...
Syncing with remote
2022-09-04 16:07:37 -04:00
3cd8259a78
Merge branch 'adafruit:main' into adcdma
2022-09-04 15:59:20 -04:00
d7a1db5b87
Changes per review
2022-09-04 15:57:59 -04:00
449b43e5a6
Merge pull request #6863 from jepler/rp2pio-erroneous-mask
...
rp2pio: fix occasional bug when not using OUT pins
2022-09-04 09:15:35 -04:00
a3e17189a4
rp2pio: fix occasional bug when not using OUT pins
...
a NULL first pin object is used to indicate that there are zero
of some kind of pin associated with the StateMachine. However,
mask_and_rotate wasn't checking for zero. It actually read data from
near address 0x0 and (in my case) got a nonzero mask, which then
caused a program with GPIO11 and GPIO12 as input with pull-up and no
out pins to erroneously encounter the error "pull masks conflict with
direction masks"
2022-09-03 20:39:42 -05:00
6fe2ea4513
Merging back with updated main files
2022-09-02 15:51:45 -04:00
59fb3fbbd6
Merge branch 'adafruit:main' into main
2022-09-01 10:35:13 +02:00
04af01a672
Pin Validation fixed/readmultiple return fixed
2022-08-27 14:47:12 -04:00
ebd58155f2
bump pico-sdk to 1.4.0
2022-08-26 09:54:16 -05:00
6fd08483e2
Tidying code for PR/ Minor Issues
2022-08-24 17:41:51 -04:00
e23b621d69
Fixing 8 bit and 12 bit conversion
2022-08-22 18:55:55 -04:00
f5655dd48c
Fixing Build errors/ DMA Xfer Rate
2022-08-21 11:44:40 -04:00
68671399d1
More formating
2022-08-19 10:51:13 -04:00
d3c3c9eac4
Tidy a few things
2022-08-18 19:10:16 -04:00
f91af513b7
Introduced odule adcbuffer / removed analogio/AnalogFastIn
2022-08-18 16:23:17 -04:00
34b8fbaf14
Merge branch 'adafruit:main' into adcdma
2022-08-18 09:08:10 -04:00
23f2b62196
Add the Solder Party BBQ20KBD board
2022-08-17 20:44:23 +02:00
4542c801b0
Tidying up loose endson draft PR
2022-08-14 13:03:33 -04:00
7584363f66
Forgot an include
2022-08-13 17:41:45 -05:00
1ae2a2154e
Initial i2ctaret commit
2022-08-13 17:00:43 -05:00
8cd12b2478
Copyright Change
2022-08-12 16:01:58 -04:00
81c7ba899d
Copyright Update/Acknowledgements
2022-08-12 13:57:45 -04:00
6d8e8c71fc
Merge branch 'adcdma' of https://github.com/latkinso42/circuitpython into adcdma
...
Fixing code behind commits
2022-08-11 17:58:46 -04:00
c3c1e307c4
Sample Rate Enhancements
2022-08-11 17:50:30 -04:00
5fb5fd0558
Merge branch 'adafruit:main' into adcdma
2022-08-10 18:33:52 -04:00
e778112710
Merge branch 'adafruit:main' into adcdma
2022-08-10 10:29:17 -04:00
9e0c580d3d
AnalogFastIn
2022-08-10 09:42:24 -04:00
41bcd7b260
Remove support for auto-brightness
2022-08-09 22:40:21 -04:00
c4db71d12e
Merge pull request #6721 from dhalbert/i2c-target
...
Change I2C terminology from "peripheral" to "target"
2022-08-09 16:12:17 -04:00
df52d995ed
Merge pull request #6714 from dannystaple/patch-2
...
Improve docs for rp2Pio Statemachine frequency
2022-08-09 10:50:27 -07:00
84807cd6eb
Change I2C terminology from "peripheral" to "target"
2022-08-09 13:13:19 -04:00
5ce3778d75
Add custom board: Octave RP2040
2022-08-09 22:19:38 +09:00
3c1c477c5b
Improve docs for rp2Pio Statemachine frequency
...
This frequency can be set to 0 for the system (133mhz) clock speed.
2022-08-08 22:14:55 +01:00
f69939c49c
First Commit for AnalogFastIn
2022-08-06 16:22:50 -04:00
c884194c92
Fixed incorrect PID.
2022-08-03 08:45:39 +02:00
03181fe362
Adds support for the Challenger RP2040 SubGHz board.
2022-07-31 10:36:04 +02:00
2baf3455bd
Add board.LED (alias of board.LED_R part of RGB)
...
Totally untested change (will try with the artifact), but I think every board should have a board.LED if possible to be able to use the learn guide basic instruction.
2022-07-28 16:46:56 +02:00
87e8994c4a
no default extension for ESP, fix duplicate line in rp2
2022-07-26 18:15:59 +02:00
eabe8b971a
list extensions instead of macros names ("bin,uf2" not BIN_UF2)
...
the modules_support_matrix usees a dictionnary per board instead of a list
optionally include the frozen modules URLs in it
2022-07-26 18:15:59 +02:00
d021d9ae4a
Move build extensions to board directories
...
- define CIRCUITPY_BUILD_EXTENSIONS to predefined values
- set CIRCUITPY_BUILD_EXTENSIONS in port and board config
- reuse the support matrix "get_settings_from_makefile" to get it
- move the existing port and board specific values
- remove the C3 specific board values because it's not the default
- update build_release_files.py to use get_settings_from_makefile
2022-07-26 18:15:50 +02:00
acdfda7d0e
Merge pull request #6624 from bwshockley/bwshockley-figpi
...
Add raspberrypi port - figpi
2022-07-25 15:23:52 -07:00
c90167a9db
Merge pull request #6630 from ViktorWiz/w5500-evb-pico
...
Add WIZNet W5500-EVB-Pico
2022-07-25 15:16:32 -07:00
955bcee1b3
It's OK for an init program to be zero bytes long
...
Closes #6636
2022-07-23 20:01:31 -05:00
ae6c0e347c
Add WIZNet W5500-EVB-Pico
2022-07-22 17:31:58 +09:00
dc686545c2
Update pins.c
...
Minor whitespace change.
2022-07-20 15:40:43 -05:00
e9eeaf2096
Update mpconfigboard.h
...
Moved UART to pins 24/25.
2022-07-20 12:35:40 -05:00
d01b65dd32
Create pins.c
2022-07-20 12:35:08 -05:00
3861a97f38
Create pico-sdk-configboard.h
2022-07-20 12:18:22 -05:00
3647cfa424
Create mpconfigboard.mk
2022-07-20 12:17:39 -05:00
d2865764ca
Create mpconfigboard.h
...
Added file.
2022-07-20 12:12:31 -05:00
21af8f42cc
Create board.c
2022-07-20 11:11:49 -05:00
d9f6e99942
Fix RP2040 UART
...
It couldn't receive more than 32 bytes in while checking in_waiting
because in_waiting didn't turn interrupts back on correctly.
Fixes #6579
2022-07-11 13:36:44 -07:00
be3482ff05
Set MICROPY_HW_LED_STATUS pin to the elecfreaks_picoed
2022-07-11 16:51:06 +08:00
dce9396fe3
issue adafruit#6538 loose bounds checking on WAIT PIO instruction
2022-07-02 14:32:20 -07:00
1599844b82
Add some frozen libraries to elecfreaks_picoed
2022-06-29 15:03:29 +08:00
0b80c62400
Merge branch 'adafruit:main' into rp2040-shim
2022-06-22 11:40:02 -05:00
ad56a16c2d
Add board Silicognition LLC RP2040-Shim
2022-06-14 11:28:41 -06:00
9fbad229c0
Add custom board: Electrolama minik (RP2040)
2022-06-14 15:51:10 +01:00
42f05a32a3
Merge branch 'adafruit:main' into main
2022-06-09 08:42:42 +02:00
9c20eb58e9
Merge pull request #6450 from mwisslead/rp2040_pulsein_common_hal_construct
...
Rp2040 pulsein improvements
2022-06-08 08:15:29 -07:00
5c13f844c7
Fixed pre-commit trailing whitespace
2022-06-08 16:43:49 +02:00
91000ea294
Adds support for Challenger RP2040 LoRa boards
2022-06-08 16:38:21 +02:00
2baf476530
Merge pull request #6463 from adafruit/7.3.x
...
Catch main up to 7.3.x
2022-06-06 11:58:05 -07:00
2f0d82a50b
Disable board.SPI() for Challenger NB RP2040 WiFi
...
This was done as a result of an issue with the SPI pin mappings.
Please refer to the following for additional information: https://ilabs.se/challenger-rp2040-wifi-spi-bug
2022-06-06 09:52:23 +02:00
80ae14202a
Merge pull request #6416 from FoamyGuy/display_brightness_pwm
...
display brightness pwm 500hz frequency
2022-06-05 23:52:42 -04:00
ac282b2a73
Merge pull request #6440 from tannewt/translate_header
...
Switch translate() to the header file
2022-06-05 23:50:47 -04:00
a61c4c1af9
Merge pull request #6411 from fabaff/weact-studio-pico
...
Add support for WeAct Studio Pico
2022-06-05 19:17:56 -04:00
7a073317f7
Update PID (0x102E)
2022-06-06 01:03:02 +02:00
260994d16e
Merge branch 'main' into display_brightness_pwm
2022-06-04 11:32:15 -05:00
cbff9dd8e3
add new argument for all boards with built-in display
2022-06-04 11:08:20 -05:00
9d10a3da66
Conditionalize LTO
2022-05-27 12:59:54 -07:00
c3f58193ca
Correctly scale analog reading per issue #4794
2022-05-24 08:46:39 -07:00
0f1973b037
Merge pull request #6418 from solderparty/stamp_round_board
...
Add a Round Carrier board file to the RP2040 Stamp build
2022-05-23 19:42:56 +02:00
2b0518233b
rp2040 PulseIn improvements
2022-05-23 00:45:06 +00:00
893fc66d16
Use common_hal_rp2pio_statemachine_construct for PulseIn
2022-05-23 00:45:06 +00:00
d2d3b27822
Add a Round Carrier board file to the RP2040 Stamp build
2022-05-22 15:52:25 +02:00
e852b28bb2
update pico-sdk to 1.3.1
2022-05-20 17:52:35 -04:00
f63b26c534
address jepler's comments and further squeezes
2022-05-20 10:10:55 -04:00
f1f9ba2371
Add support for WeAct Studio Pico
2022-05-19 23:51:25 +02:00
d875eb2ff4
Add support for VCC-GND Studio YD-RP2040
2022-05-19 22:57:43 +02:00
a01dec1df9
message consolidation and more use of validators
2022-05-19 15:38:37 -04:00
289fdc1241
Added link to library and guide for rp2pio
2022-05-13 11:15:26 -04:00
9743aea7aa
Merge pull request #6334 from BigTuna94/add-rp2.65-f
...
Add new Keyboard - RP2.65-F
2022-05-10 16:52:39 -07:00
bb46898572
Merge pull request #6361 from mwisslead/rp2040_pulsein_buffer_fix
...
Fix buffer issue for rp2040 PulseIn
2022-05-08 12:37:17 -04:00
5f4f66774c
Merge pull request #6360 from jepler/statemachine-improvements
...
Statemachine improvements
2022-05-07 09:35:57 -05:00
561ed3739a
fix the docstrings
2022-05-07 07:49:16 -05:00
34427bd6ba
Update StateMachine.c
2022-05-06 22:36:24 -04:00
b7882edd01
Fix buffer issue for rp2040 PulseIn
2022-05-07 00:57:10 +00:00
b482a732c6
StateMachine: add swap flag
...
Always use DMA if swap flag is enabled.
Improve docs a bit
2022-05-06 15:22:43 -05:00
23c0fc8354
add ability to get, clear txstall flag
...
This can be used to make sure a PIO has actually finished all data
it was schedule to receive via a 'once' background_write
2022-05-06 15:22:43 -05:00
f776749ca3
Key off len, not buf, to decide if anything to DMA
2022-05-06 15:22:43 -05:00
1a9034ff7c
rp2pio: Allow background_write(None) to terminate after complete loop
2022-05-06 15:22:42 -05:00
5edc59f070
Merge pull request #6337 from jepler/property-storage
...
Optimize flash storage of properties
2022-05-06 09:55:18 -04:00
02ec1cebf6
Fix pin mapping for thing plus 2040
...
GPIO 26 was mapped to GPIO 28
2022-05-05 21:11:32 -04:00
a9d929627a
minor comment update
2022-05-05 14:40:49 -05:00
b71ea29a8b
Merge pull request #6330 from KurtE/rp2040_uart_rs485
...
[RP2040] Allow any GPIO pin for RS485 direction pin
2022-05-04 13:32:36 -04:00
7d7986b041
Add NEOPIXEL pin
...
Closes : #6307
2022-05-03 12:21:15 -05:00
510890b207
Enable squeezing property storage in flash
...
.. and enable it on atmel-samd and raspberrypi. On trinket_m0 this saves
96 net bytes of flash. There are 216 bytes actually saved by reducing
the flash storage size of the property descriptors, but added code in
several paths takes back over half of the 'raw savings'.
By organizing the "get-only" and "get-set" (but no delete) properties
each in a different section, we can represent then more efficiently.
Testing performed: that a get-only property can still be gotten but
can't be set or deleted; that a get-set property can sill be gotten or
set but can't be deleted. Tested on pygamer.
Because this requires linker file support, I only enabled it on two of
the ports.
2022-05-03 08:48:53 -05:00
78cf0a90af
Make MP_PROPERTY_GETTER / _GETSET fully declare the property
...
This will enable setting data attributes, namely, the section of the
symbol.
2022-05-03 08:48:53 -05:00
31da335cac
Introduce, use MP_PROPERTY_GETTER, _GETSET
...
Later, these can be changed in cunning ways to save flash storage.
2022-05-03 08:48:52 -05:00
a23ede8bc4
update USB VID/PID codes to match pidcodes request
2022-05-02 19:49:30 -04:00
1fad381513
[RP2040] Allow any GPIO pin for RS485 direction pin
...
As I mentioned in issue #6310 while investigating that the Teensy port
did not support RS485_dir pin on normal GPIO pins, I found that it
was not implemented either as well on some other ports.
So was curious to implement it for RP2040 using same approach as I did
for the MIMXRT in the Pull Request #6328
That is I setup the specified pin as a normal GPIO pin in output mode
and then when you do a write operation it sets the GPIO pin logically
high, and when the write completes I set it logically low.
Note: knowing when I can set it low can be tricky, as you need to make
sure the full output has completed otherwise the data will be corrupted.
I am using: uart_tx_wait_blocking(self->uart);
Which looks like it is supposed to wait until the busy status is no
longer set, which the Reference manual mentioned, but this is leaving
the line logically set longer than I would like.
however I have tried running it with my hacked up version of the
Python Robotis DynamixelSDK and was able to talk to some AX servos.
I did have to change the library slightly for the RP2040, as the
library was erroring out when you did something like uart.read(5)
and it timed out without receiving anything. The RP2040 returned
None whereas I think the Teensy returned an empty set, which is what
it looks like the PySerial original code expects.
Not sure if anyone is interested in this, but thought i would
put it out as PR and see.
2022-04-30 14:31:08 -07:00
63abd9a9cf
Merge pull request #6312 from dhalbert/adjust-neopixel-timings
...
test and adjust NeoPixel timings on multiple ports
2022-04-26 13:18:47 -04:00
3a8fb4e956
Merge pull request #5852 from jepler/floppy
...
Add floppyio
2022-04-26 11:40:19 -04:00
c8e8171cec
Merge pull request #6300 from jepler/pio-continuous
...
rp2040: add a background write with looping to StateMachines
2022-04-26 10:09:02 -04:00
910662e833
Finalised motor 2040 pins
2022-04-26 12:56:31 +01:00
1ccf767112
Merge branch 'adafruit:main' into motor
2022-04-26 10:23:14 +01:00
4eeaf41edc
test and adjust NeoPixel timings on multiple products
2022-04-25 23:12:24 -04:00
1a89a2d366
fix doc build
2022-04-23 13:25:59 -05:00
989fb828d4
Revamp background writing
...
Now a 'once' and a 'loop' buffer can be specified.
'once' is useful for things like writing a neopixel strip in the background,
if you can guarantee the buffer contents are stable until the write is complete.
'loop' is useful for periodic things, like pwm & servos.
both together are useful for some special cases of pwm/servo, where a
transitional waveform needs to be played for one repetition and then
a new waveform needs to be played after that.
The API is renamed to reflect that it's a more generic 'background'
operation.
2022-04-23 13:09:36 -05:00
e8541e866c
fix end of file issue
2022-04-22 15:02:50 +09:00
28296f98f8
update pid
2022-04-22 14:59:28 +09:00
f91be019f6
Merge branch 'adafruit:main' into w5100s-evb-pico
2022-04-22 14:52:04 +09:00
457aba79f4
fix doc build
2022-04-20 08:09:38 -05:00
144eb5dfd4
fix lost DMA IRQ
2022-04-19 16:42:27 -05:00
ebc426d9e6
Remove debug prints, improve docs
2022-04-19 16:39:04 -05:00
b128f180ca
switch to single single dma channel, fix some bugs
2022-04-19 16:33:51 -05:00
33d6d55675
the basics work
...
the sequence has to be a minimum length, 8 entries, but this problem
is not detected. I don't THINK this is an insurmountable problem.
2022-04-19 15:14:50 -05:00
33f5598acc
Stub 'continuous write' functionality
2022-04-19 11:35:43 -05:00
17bba7b17d
remove Adafruit_CircuitPython_BusDevice from frozen modules, it's built in now
2022-04-19 06:49:11 +02:00
9c1b44a030
Modify USB VID and PID of the Pico:ed
2022-04-14 17:42:04 +08:00
b30d2e0889
update w5100s-evb-pico mpconfigboard.h
2022-04-14 14:35:23 +09:00
8cce2e6406
Updated motor pin names
2022-04-12 15:20:28 +01:00
71a7ec6f76
Add ELECFREAKS Pico:ed board.
2022-04-12 16:10:02 +08:00
01cff3c4f8
add MIDI to frozen libs
2022-04-10 14:10:07 -04:00
f7be4345d9
Merge remote-tracking branch 'origin/main' into floppy
2022-04-07 08:37:46 -05:00
769b182da4
Added definition for upcoming Pimoroni motor board
2022-04-07 07:24:55 +01:00
1a329cfd11
Merge pull request #6029 from jepler/pio-wrap
...
raspberry: StateMachine: Add support for wrap=, wrap_target=
2022-04-06 11:55:02 -04:00
76efdfd9a6
initial commit for w5100s-evb-pico
2022-04-06 14:52:28 +09:00
fe98248a3d
Merge remote-tracking branch 'origin/7.2.x' into merge-7.2.x
2022-04-05 08:45:13 -05:00
4cccc1a036
handle clearing both RXIC and RTIC interrupts
2022-04-04 23:55:08 -04:00
f059f7180c
Merge pull request #6208 from ZodiusInfuser/badger
...
Improvement to Badger 2040 operation on battery
2022-03-30 13:35:47 -04:00
336abdfbc7
Switch variable to extern
2022-03-30 17:44:36 +01:00
dd933c7d06
add NeoPixel lib to firmware
2022-03-30 09:17:26 -04:00
f07cfdd80c
Linting fixes
2022-03-28 18:34:39 +01:00
c2fb44b36c
Set enable pin to high during boot
2022-03-28 15:56:02 +01:00
b44a2a0c8e
Updated pin name to match schematic
2022-03-28 14:07:08 +01:00
8e98be2704
Added additional constants
2022-03-24 18:32:39 +00:00
9c81ea86e9
Added board definition for upcoming Pimoroni servo driver.
2022-03-24 16:07:04 +00:00
dcc3ec171e
Merge remote-tracking branch 'adafruit/7.2.x' into merge_7.2.2
2022-03-15 13:56:11 -07:00
fd17ba6d91
Merge pull request #6143 from ZodiusInfuser/badger
...
Added built-in display bringup for Badger2040
2022-03-15 13:28:00 -07:00
c919e9c2cc
fix duplicate reference names for DSN export
2022-03-14 21:02:14 -04:00
af2862ead9
Removed trailing whitespace
2022-03-14 22:28:28 +00:00
a778469082
Inverted the display pixels to match the expected CPY behaviour
2022-03-14 11:12:03 +00:00
f13d218749
Merge pull request #6125 from tannewt/usb_host
...
Start of USB host API
2022-03-11 21:41:28 -05:00
eab5f00548
Added built-in display bringup for Badger2040
2022-03-11 20:10:42 +00:00
e4cd9690f1
rework auto-reload delay logic
2022-03-11 14:03:04 -05:00
1c8f671f0a
Merge pull request #6118 from pewpew-game/parallel-reset-optional
...
paralleldisplay: reset and read pins should be optional
2022-03-08 09:34:25 -05:00
83593a1558
Start of USB host API
...
This allows you to list and explore connected USB devices. It
only stubs out the methods to communicate to endpoints. That will
come in a follow up once TinyUSB has it. (It's in progress.)
Related to #5986
2022-03-07 18:07:25 -08:00
236ebba0ca
melopero_shake_rp2040: Add missing BOARD_DICT_STANDARD_ITEMS
2022-03-08 08:58:32 +11:00
b69a06b2ed
Also fix the read pin in the atmel and rp2040 ports
2022-03-06 11:33:07 +01:00
d66cf1d8ef
Name fix
2022-02-21 11:26:43 +00:00
d0bbaddcb3
Board definitions for upcoming EInk board
2022-02-21 11:23:55 +00:00
729fcf749e
Fix doc markup
2022-02-15 16:03:52 -06:00
a58bf235d8
raspberry: StateMachine: Add support for wrap=, wrap_target=
2022-02-13 16:38:53 -06:00
22928fec55
Explain read and write size to/from PIO FIFOs
2022-02-10 10:55:04 -08:00
da035fe958
Merge pull request #5990 from sgauche/stm_spi_3wire
...
Add support for half-duplex SPI to CPy
2022-02-09 13:11:37 -05:00
a8d8651873
Canonical C style for half_duplex = true/false
2022-02-08 23:13:22 -05:00
309f4fb2b9
add half_duplex false param to spi construct function call in some board files
2022-02-08 22:59:26 -05:00
89ad767b8f
add half_duplex to spi constructs in other ports but raise not implemented errors
2022-02-08 22:25:23 -05:00
ce191327e8
RP2040 PDMIn frequency based on sample rate
2022-02-08 10:10:02 -06:00
1c17dc9348
ports/raspberrypi/common-hal/busio/SPI.c
2022-02-07 17:07:47 -05:00
566f8bed99
Merge pull request #5984 from DavePutz/issue_5967
...
Correcting order of sideset parameters in function call
2022-02-05 21:58:30 -05:00
8c10148b21
Correcting order of sideset parameters in function call
2022-02-05 16:15:12 -06:00
07e710b0a0
Merge remote-tracking branch 'origin/main' into floppy
2022-02-04 09:01:36 -06:00
6a7742ba88
Merge remote-tracking branch 'origin/main' into floppy
2022-02-04 09:00:32 -06:00
749bb99863
bump pico-sdk to 1.3.0
2022-02-02 17:15:33 -06:00
a04cd6444b
Merge pull request #5966 from Neradoc/add-alias-stemma-i2c
...
Add alias board.STEMMA_I2C for all boards with qwiic/stemma/QT
2022-02-02 11:08:13 -05:00
b2c8fd3938
add board.STEMMA_I2C alias to some boards
2022-02-02 01:18:46 +01:00
bf57f3606a
rp2pio: Add pull up/down support for the "jmp pin"
...
This is needed so that the floppy flux reader can enable the pull up
on the index pin while using it as a pio jmp pin.
Also fixes a doc bug where the `jmp_pin` was omitted in one spot in the docs.
2022-02-01 10:19:17 -06:00
cc410ad6a3
common-hal I2C combined write_read
2022-01-31 22:03:30 -05:00
5933c04499
Merge pull request #5899 from tannewt/rp2040_winbond
...
Add winbond to Feather RP2040
2022-01-21 16:44:52 -05:00
c598ede84e
Add winbond to Feather RP2040
2022-01-21 10:34:38 -08:00
67293c265c
Merge branch 'main' into board-bus
2022-01-21 10:08:39 +05:30
13db65566d
ESP NeoPixel fixes
...
This tweaks the RMT timing to better match the 1/3 and 2/3 of 800khz
guideline for timing. It also ensures a delay of 300 microseconds
with the line low before reset.
Pin reset is now changed to the IDF default which pulls the pin up
rather than CircuitPython's old behavior of floating the pin.
Fixes #5679
2022-01-19 16:29:07 -08:00
8e895e1986
Add floppyio for rp2040
...
Tested on RP2040 Feather with a 3.5" Prodigy diskette, the whole
surface reads 100% across 3+ trials.
2022-01-17 16:34:47 -06:00
784a5edc4b
Define default SPI pins on kb2040
...
Fixes #5875
2022-01-17 06:52:08 +01:00
db5f99c63e
Add a function to get low level register access
...
The port is free to return NULL for any/all of these, and the caller has
to check.
This will be used in the floppy code, because aside from getting the
registers, it looks like all is independent of MCU.
2022-01-13 15:29:03 -06:00
ae58858036
Merge pull request #5820 from CharString/waveshare_rp2040_zero
...
Waveshare RP2040-Zero board definition
2022-01-12 10:56:55 -08:00
8226fb8e0b
Bring pins in line with board documentation.
...
This brings the pins in line with the documented [pinouts]. The only
"special" pins:
- GP0, GP1 are mentioned as the default UART, so we init them as
such and give them the TX and RX alternative names.
- GP16 is connected to the onboard neopixel DIN line and we assign it
the NEOPIXEL name. (Power of the neopixel is connected to the 3.3V
rail, not a pin. See [schematic].)
- GP26, GP27, GP28, GP29 have unambiguous ADC designations in the
[pinouts], so we assign the `A` analogue names as the Pico board
definition does.
[pinouts]: https://www.waveshare.com/wiki/RP2040-Zero#Pinouts
[schematic]: https://www.waveshare.com/w/upload/4/4c/RP2040_Zero.pdf
2022-01-12 12:27:54 +01:00
9b825869c5
raspberrypi : Check UART before claiming pins, claim it after
...
Co-authored-by: Scott Shawcroft <scott@adafruit.com>
2022-01-11 22:02:47 +01:00
2251d0f4b0
raspberrypi: Claim UART after checking pins
...
If, for some reason, you mix up TX and RX when calling `busio.UART` (who would do that ;) ), you get `Invalid pins`. When you go to try again, you'll get `All UART peripherals are in use` because the interface was claimed as busy before pins are verified. This should fix that issue.
2022-01-11 15:13:36 +01:00
e23b272595
Added missing LDO control pin (SARA_PWR)
2022-01-08 16:39:48 +01:00
Jeff Epler
Dan Halbert
Dan Halbert
Neradoc
Lee Atkinson
Pontus Oldberg
Scott Shawcroft
arturo182
gamblor21
takayoshiotake
Danny Staple
David Glaude
ViktorWiz
Benjamin Shockley
Xu Hao
Nick Lopez
Patrick Van Oosterwijck
Omer Kilic
Nathan Young
Fabian Affolter
foamyguy
Paint Your Dragon
Michael Wisslead
Alec Delaney
Guy Dupont
Zach Richard
KurtE
ZodiusInfuser
ViktorWiz
Michael Himing
Radomir Dopieralski
Scott Gauche
root
microDev
Neradoc
Scott Shawcroft
Chris Wesseling
arturo182