Commit Graph

21 Commits

Author SHA1 Message Date
Damien George 136369d72f all: Update to point to files in new shared/ directory.
Signed-off-by: Damien George <damien@micropython.org>
2021-07-12 17:08:10 +10:00
Damien George 80e79a777d zephyr: Add initial ubluetooth module integration.
Currently only advertising and scanning are supported, using the ring
buffer for events (ie not synchronous events at this stage).

The ble_gap_advertise.py multi-test passes (tested on a nucleo_wb55rg
board).

Signed-off-by: Damien George <damien@micropython.org>
2021-06-06 21:57:06 +10:00
Maureen Helm f17c0db5f7 zephyr: Update disk access configuration for Zephyr v2.6.0.
Zephyr's Kconfig symbols and defaults for SDHC/SDMMC disk drivers and
the disk access subsystem were reworked between Zephyr v2.5.0 and
v2.6.0. Update MicroPython accordingly.

Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2021-06-06 20:17:42 +10:00
Damien George d120859857 zephyr: Run scheduled callbacks at REPL and during mp_hal_delay_ms.
And ctrl-C can now interrupt a time.sleep call.  This uses Zephyr's k_poll
API to wait efficiently for an event signal, and an optional semaphore.

Signed-off-by: Damien George <damien@micropython.org>
2021-04-30 15:32:16 +10:00
Maureen Helm ac94e06f0b zephyr: Include storage/flash_map.h unconditionally.
Include storage/flash_map.h unconditionally so we always have access to the
FLASH_AREA_LABEL_EXISTS macro, even if CONFIG_FLASH_MAP is not defined.

This fixes a build error for the qemu_x86 board:

main.c:108:63: error: missing binary operator before token "("
  108 |     #elif defined(CONFIG_FLASH_MAP) && FLASH_AREA_LABEL_EXISTS(storage)
      |                                                               ^
../../py/mkrules.mk:88: recipe for target 'build/genhdr/qstr.i.last' failed

Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2020-08-21 11:23:43 +10:00
Damien George f84145bea1 zephyr: Implement machine.Pin.irq() for setting callbacks on pin change.
Supports hard and soft interrupts.  In the current implementation, soft
interrupt callbacks will only be called when the VM is executing, ie they
will not be called during a blocking kernel call like k_msleep.  And the
behaviour of hard interrupt callbacks will depend on the underlying device,
as well as the amount of ISR stack space.

Soft and hard interrupts tested on frdm_k64f and nucleo_f767zi boards.

Signed-off-by: Damien George <damien@micropython.org>
2020-06-30 22:33:41 +10:00
Maureen Helm 4837b1caa2 zephyr: Convert DT_FLASH_AREA usages to new dts macros.
Converts DT_FLASH_AREA usages in the zephyr port to new device tree macros
introduced in zephyr 2.3.

Tested with littlefs on the reel_board.
2020-06-12 10:25:04 +10:00
stijn 84fa3312cf all: Format code to add space after C++-style comment start.
Note: the uncrustify configuration is explicitly set to 'add' instead of
'force' in order not to alter the comments which use extra spaces after //
as a means of indenting text for clarity.
2020-04-23 11:24:25 +10:00
Maureen Helm 110a610f70 zephyr: Execute main.py file if it exists.
Adds support in the zephyr port to execute main.py if the file system is
enabled and the file exists. Existing support for executing a main.py
frozen module is preserved, since pyexec_file_if_exists() works just
like pyexec_frozen_module() if there's no vfs.
2020-03-11 08:30:42 -05:00
Maureen Helm 78c7e4a859 zephyr: Enable usb mass storage class on mimxrt1050_evk.
Enables the zephyr usb device stack and mass storage class on the
mimxrt1050_evk board. The mass storage class is backed by the sdhc disk
access driver, so it's now possible to browse and modify the contents of
the SD card from a USB host (your PC). This is in preparation to support
writing a main.py script to the SD card, and then executing it after the
next reset.
2020-03-11 07:46:41 -05:00
Maureen Helm 5feb54afbb zephyr: Mount a file system during init.
Adds support in the zephyr port to mount a file system if a block device
(sdhc disk access or flash area) is available. The mount point is either
"/sd" or "/flash" depending on the type of block device.

Tested with an sdhc disk access block device and fatfs on the
mimxrt1050_evk board.

Tested with a flash area block device and littlefs on the reel_board.
2020-03-11 07:46:41 -05:00
Damien George 69661f3343 all: Reformat C and Python source code with tools/codeformat.py.
This is run with uncrustify 0.70.1, and black 19.10b0.
2020-02-28 10:33:03 +11:00
Maureen Helm a0440b01ea zephyr: Enable virtual file system and uos module.
Enables the virtual file system and uos module in the zephyr port.
No concrete file system implementations are enabled yet.
2020-02-07 11:24:06 +11:00
Kamil Klimek 53f3cbc2c4 zephyr/main: Use mp_stack API instead of local pointer for stack top.
The MP_STATE_THREAD(stack_top) is always available so use it instead of
creating a separate variable.  This also allows gc_collect() to be used as
an independent function, without real_main() being called.
2019-10-29 23:05:07 +11:00
Paul Sokolovsky 9480c188e8 zephyr/main: After builtin testsuite, drop to REPL.
It makes sense to make even testsuite-enabled builds be suitable for
interactive use.
2018-05-21 10:35:16 +10:00
Paul Sokolovsky 7a9a73ee84 zephyr/main: Remove unused do_str() function.
The artifact of initial porting effort.
2017-12-26 20:16:08 +02:00
Paul Sokolovsky 6b19520a74 zephyr: Add support for binary with builtin testsuite.
If TEST is defined, file it refers to will be used as the testsuite
source (should be generated with tools/tinytest-codegen.py).

"make-bin-testsuite" script is introduce to build such a binary.
2017-12-15 12:10:39 +02:00
Paul Sokolovsky 55d33d5897 zephyr/main: Move var declarations to the top of file. 2017-12-08 12:39:57 +02:00
Paul Sokolovsky 58ea239510 zephyr: Use CONFIG_NET_APP_SETTINGS to setup initial network addresses.
Ideally, these should be configurable from Python (using network module),
but as that doesn't exist, we better off using Zephyr's native bootstrap
configuration facility.
2017-10-07 14:08:50 +03:00
Damien George a3dc1b1957 all: Remove inclusion of internal py header files.
Header files that are considered internal to the py core and should not
normally be included directly are:
    py/nlr.h - internal nlr configuration and declarations
    py/bc0.h - contains bytecode macro definitions
    py/runtime0.h - contains basic runtime enums

Instead, the top-level header files to include are one of:
    py/obj.h - includes runtime0.h and defines everything to use the
        mp_obj_t type
    py/runtime.h - includes mpstate.h and hence nlr.h, obj.h, runtime0.h,
        and defines everything to use the general runtime support functions

Additional, specific headers (eg py/objlist.h) can be included if needed.
2017-10-04 12:37:50 +11:00
Damien George 01dd7804b8 ports: Make new ports/ sub-directory and move all ports there.
This is to keep the top-level directory clean, to make it clear what is
core and what is a port, and to allow the repository to grow with new ports
in a sustainable way.
2017-09-06 13:40:51 +10:00