6fe8c7b32c
Merge pull request #26 from adafruit/ssd1306_hardware_i2c
...
Support SSD1306 with hardware I2C interface. Closes #15
2016-10-20 16:17:02 -07:00
a23cc5aa14
drivers: Remove SSD1306 driver, it lives in separate micropython-adafruit-ssd1306 repo now.
2016-10-20 23:13:22 +00:00
f539312af3
atmel-samd: Enable framebuffer for SSD1306 and other displays.
2016-10-20 23:10:28 +00:00
00a44fa36c
Merge remote-tracking branch 'micropython/master'
...
Conflicts:
README.md - Kept Adafruit README.md intact.
py/emitglue.c - Added xtensa architecture as an OR of the define.
zephyr/README.md - Fixed spelling mistake.
2016-10-20 23:01:13 +00:00
3967ca7390
stmhal/Makefile: Use standard rules for frozen module generation.
...
As defined in py/py.mk.
2016-10-21 01:27:17 +03:00
b440307b4a
py/py.mk: Automatically add frozen.c to source list if FROZEN_DIR is defined.
...
Now frozen modules generation handled fully by py.mk and available for reuse
by any port.
2016-10-21 01:08:43 +03:00
1f13f870b8
Merge pull request #25 from adafruit/drivers-more
...
Update drivers.rst
2016-10-20 10:16:59 -07:00
0901c145ba
Update drivers.rst
2016-10-20 18:58:46 +02:00
2cc1b25eef
Merge pull request #24 from adafruit/urandom
...
atmel-samd: Enable full urandom module from extmod. Closes #17 .
2016-10-20 09:20:18 -07:00
3f251efb9b
esp8266/modules/webrepl: Enforce only one concurrent WebREPL connection.
...
Concurrent WebREPL connections were never supported, now actually check
for this.
2016-10-20 16:50:38 +03:00
5333f5f987
atmel-samd: Enable full urandom module from extmod.
2016-10-20 06:41:21 +00:00
0cb0bd0f25
atmel-samd: More updates to the docs including the in-code docs.
2016-10-19 16:49:35 -07:00
7ebc9a4511
Switch away from sphinx.parsers which isn't available in sphinx 1.3.5 on Read The Docs.
2016-10-19 10:53:37 -07:00
4c9fcd6d21
Support markdown.
2016-10-19 10:53:37 -07:00
d28b456b31
Add title to contributing doc.
2016-10-19 10:53:37 -07:00
6fcb54d2ca
Merge pull request #18 from turbinenreiter/master
...
Add Adalogger board definition in preparation of adding SD card support.
2016-10-19 09:23:44 -07:00
9b1170a65d
[atmel-samd] add adalogger board definitions
2016-10-19 10:02:01 +02:00
84679e0c06
extmod/vfs_fat_file: Check fatfs f_sync() and f_close() returns for errors.
2016-10-19 15:57:07 +11:00
17ba6ef5fa
cc3200: Fix thread mutex's so threading works with interrupts.
...
Running Python code on a hard interrupt is incompatible with having a GIL,
because most of the time the GIL will be held by the user thread when the
interrupt arrives. Hard interrupts mean that we should process them right
away and hence can't wait until the GIL is released.
The problem with the current code is that a hard interrupt will try to
exit/enter the GIL while it is still held by the user thread, hence leading
to a deadlock.
This patch works around such a problem by just making GIL exit/enter a
no-op when in an interrupt context, or when interrupts are disabled.
See issue #2406 .
2016-10-19 14:24:56 +11:00
46e7f8e4fb
Documentation rework to unify the docs together rather than having them
...
on a per port basis.
Also enables generating docs from inline RST in C code. Simply omits all
lines except those that start with //|. Indentation after "//| " will be
preserved.
2016-10-18 17:42:47 -07:00
204222653e
esp8266/main: Mark nlr_jump_fail() as MP_FASTCODE.
...
It's probably not strictly needed so far, but serves as an example of
MP_FASTCODE use and may be helpful in the future.
2016-10-19 00:21:14 +03:00
9514d847fe
esp8266: Add MP_FASTCODE modifier to put a function to iRAM.
...
It can be used in the following manner:
void MP_FASTCODE(foo)(int arg) { ... }
2016-10-19 00:20:10 +03:00
462748de0c
esp8266/esp8266.ld: Move main.o to iROM.
2016-10-19 00:12:54 +03:00
e7e0d91be8
esp8266/esp8266.ld: Move modmachine.o to iROM.
2016-10-19 00:04:30 +03:00
6566e3f6a8
esp8266/esp8266.ld: Move help.o to iROM.
2016-10-19 00:01:14 +03:00
20d0271863
esp8266/esp_init_data: Auto-initialize system params with vendor SDK 2.0.0.
...
SDK 2.0.0 goes into boot loop if a firmware is programmed over erased flash,
causing problems with user experience. This change implements behavior
similar to older SDKs': if clean flash is detected, default system
parameters are used.
2016-10-18 15:18:07 +03:00
542f05d228
teensy: Update to provide new mp_hal_pin_XXX functions following stmhal.
2016-10-18 15:34:17 +11:00
b4cc68e4a4
stmhal/led: Refactor LED to use mp_hal_pin_output() init function.
...
As part of this patch the MICROPY_HW_LED_OTYPE setting is removed because
it is now unused (all boards anyway had this as OUTPUT_PP).
2016-10-18 14:43:05 +11:00
d49d81b167
stmhal: Refactor pin usage to use mp_hal_pin API.
2016-10-18 14:34:08 +11:00
cd9b14bb11
stmhal/modutime: Refactor to use extmod's version of ticks_cpu.
2016-10-18 14:34:08 +11:00
5c93d0b916
cc3200: Enable loading of precompiled .mpy files.
...
Adds 1072 bytes to the code size.
2016-10-18 10:17:54 +11:00
628799cd36
cc3200/mods/pybspi: Allow "write" arg of read/readinto to be positional.
...
To conform with Hardware API.
2016-10-18 10:16:46 +11:00
f12047f66d
docs/machine.SPI: Improve descriptions of xfer methods.
...
In particular remove the "*" because not all ports support keyword
arguments.
2016-10-18 10:14:26 +11:00
50ddaafa6a
cc3200: Use mp_raise_XXX helper functions to reduce code size.
...
Reduces code size by 632 bytes.
2016-10-18 09:53:43 +11:00
4d45f286eb
esp8266/Makefile: Use latest esptool.py flash size auto-detection.
2016-10-18 00:06:59 +03:00
a0b2f48c2f
docs/machine.SPI: Bring up to date with Hardware API, make vendor-neutral.
2016-10-17 18:05:16 +03:00
c8d31585a0
docs: Bump version to 1.8.5.
2016-10-17 15:32:43 +11:00
1e3a7c4ac5
tests/run-tests: Enable extmod/machine1.py on pyboard.
...
It now works.
2016-10-17 13:18:27 +11:00
48feb8ac6e
stmhal: Enable str.center(), str.[r]partition() and builtin compile().
...
Also adds "machine" to the list of modules that the parser can search for
constants.
2016-10-17 13:17:19 +11:00
57226a2b7f
stmhal: Implement machine.soft_reset().
2016-10-17 13:16:47 +11:00
ad3724e0bc
lib/utils/pyexec: Allow behaviour of SystemExit to be configurable.
...
Setting the pyexec_system_exit variable to PYEXEC_FORCED_EXT allows
SystemExit exceptions to terminate the pyexec functions.
2016-10-17 13:14:59 +11:00
7d0d7215d2
py: Use mp_raise_msg helper function where appropriate.
...
Saves the following number of bytes of code space: 176 for bare-arm, 352
for minimal, 272 for unix x86-64, 140 for stmhal, 120 for esp8266.
2016-10-17 12:17:37 +11:00
6caca3259f
tests: Add test to print full KeyError exc from failed dict lookup.
2016-10-17 12:01:18 +11:00
2750a7b38e
py/objdict: Actually provide the key that failed in KeyError exception.
...
The failed key is available as exc.args[0], as per CPython.
2016-10-17 12:00:19 +11:00
a3edeb9ea5
py/objdict: Fix optimisation for allocating result in fromkeys.
...
Iterables don't respond to __len__, so call __len__ on the original
argument.
2016-10-17 11:58:57 +11:00
e9404e5f5f
tests: Improve coverage of array, range, dict, slice, exc, unicode.
2016-10-17 11:43:47 +11:00
453c2e8f55
tests/cmdline: Improve coverage test for printing bytecode.
2016-10-17 11:23:37 +11:00
799ccdc789
esp8266, stmhal, unix: MAKE_FROZEN is consistently defined in mkenv.mk.
2016-10-16 10:49:36 +03:00
06234a6115
extmod/modussl_mbedtls: Add dummy setblocking() method.
...
Accepts only value of True.
2016-10-15 23:46:13 +03:00
cb99ae5032
atmel-samd: Rename Feather M0 Bluefruit files to Feather M0 Basic because there isn't anything Bluefruit specific yet.
2016-10-14 13:10:17 -07:00
Scott Shawcroft
Tony DiCola
Paul Sokolovsky
Radomir Dopieralski
Scott Shawcroft
Sebastian Plamauer
Alex March
Damien George