Commit Graph

103 Commits

Author SHA1 Message Date
Scott Shawcroft 8b71e26abd
Merge remote-tracking branch 'adafruit/main' into native_wifi 2020-08-25 16:39:23 -07:00
Scott Shawcroft 1034cc1217
Add espidf module. 2020-08-19 14:23:28 -07:00
Scott Shawcroft 430530c74b
SSL works until it runs out of memory 2020-08-19 14:23:28 -07:00
Scott Shawcroft 3860991111
Ping work and start to add socketpool 2020-08-19 14:22:13 -07:00
Scott Shawcroft c53a72d3f5
Fix ipaddress import and parse ipv4 strings 2020-08-19 14:22:13 -07:00
Scott Shawcroft c62ab6e09a
Add ipaddress 2020-08-19 14:22:12 -07:00
Scott Shawcroft c5b8401a15
First crack at native wifi API 2020-08-19 14:21:59 -07:00
Scott Shawcroft 6857f98426
Split pulseio.PWMOut into pwmio
This gives us better granularity when implementing new ports because
PWMOut is commonly implemented before PulseIn and PulseOut.

Fixes #3211
2020-08-18 13:08:33 -07:00
Scott Shawcroft d01f5dc0bd
Turn off terminalio for ja and ko
The font is missing many characters and the build needs the space.
We can optimize font storage when we get a good font.

The serial output will work as usual.
2020-08-17 17:17:59 -07:00
Jeff Epler c1400bae9b sharpmemory: Implement support for Sharp Memory Displays in framebufferio 2020-08-12 07:32:18 -05:00
Jerry Needell 2bdd62220e adjust stack for SAMD21 to accomodate larger pystack -- update frozen module adafruit_busdevice 2020-07-27 21:50:36 -04:00
Scott Shawcroft 1ec3580946
Merge branch 'main' into memmonitor 2020-07-22 12:24:19 -07:00
Scott Shawcroft 518d909b2c
Add memorymonitor module 2020-07-17 17:15:03 -07:00
Scott Shawcroft 1160635608
Enable PYSTACK to keep function state out of the heap 2020-07-17 17:03:42 -07:00
Jeff Epler 05837b2841 sdioio: Add shared-bindings
There is no implementation yet.
2020-06-26 11:50:25 -05:00
Jeff Epler 57fde2e07b sdcardio: implement new library for SD card I/O
Testing performed: That a card is successfully mounted on Pygamer with
the built in SD card slot

This module is enabled for most FULL_BUILD boards, but is disabled for
samd21 ("M0"), litex, and pca10100 for various reasons.
2020-06-26 11:50:23 -05:00
Jeff Epler 1d2cc0b968 I2CPeripheral: Rename class and its module
This is an incompatible change.
2020-06-25 11:44:19 -05:00
Kamil Tomaszewski 84f424f631 gnss: Implement new library for GNSS 2020-06-24 11:14:44 +02:00
Scott Shawcroft 2fd7a43f2f
Merge remote-tracking branch 'adafruit/master' into wdt-nrf 2020-05-29 10:16:24 -07:00
Scott Shawcroft 796373b8be
A number of small ESP32S2 fixes:
* Fix flash writes that don't end on a sector boundary. Fixes #2944
* Fix enum incompatibility with IDF.
* Fix printf output so it goes out debug UART.
* Increase stack size to 8k.
* Fix sleep of less than a tick so it doesn't crash.
2020-05-28 15:43:55 -07:00
Sean Cross 08362c9cab watchdogtimer: refactor to new api
This refactors the WatchDogTimer API to use the format proposed in
https://github.com/adafruit/circuitpython/pull/2933#issuecomment-632268227

Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-27 11:28:49 +08:00
Sean Cross 595f6387c2 watchdog: rename module from `wdt` and move to `microcontroller`
This also places it under the `microcontroller` object.

Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-27 11:28:49 +08:00
Sean Cross f4719609f7 wdt: add watchdog support
This adds shared bindings for a watchdog timer, based on the API
provided by micropython.

Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-27 11:28:48 +08:00
Scott Shawcroft acf4b1bede
Remove reverse methods from per-board defs 2020-05-19 11:43:57 -07:00
Scott Shawcroft 6aaab005c5
Initial ESP32S2 port.
Basic blinky works but doesn't check pins.
2020-05-15 15:36:16 -07:00
Scott Shawcroft 277e8d528b
Merge branch 'master' into Optical-Encoder-Module 2020-05-12 18:22:57 -07:00
Daniel Pollard ee2cb703c8 merged master 2020-05-12 14:41:28 +10:00
warriorofwire 1c6e646f56 vectorio: fix mpconfig definition for disabled boards 2020-05-09 17:58:01 -07:00
warriorofwire 206d0e598a Add vectorio: for drawing shapes
vectorio builds on m4 express feather

Concrete shapes are composed into a VectorShape which is put into a displayio Group for display.

VectorShape provides transpose and x/y positioning for shape implementations.

Included Shapes:

* Circle
  - A radius; Circle is positioned at its axis in the VectorShape.
  - You can freely modify the radius to grow and shrink the circle in-place.

* Polygon
  - An ordered list of points.
  - Beteween each successive point an edge is inferred.  A final edge closing the shape is inferred between the last
    point and the first point.
  - You can modify the points in a Polygon.  The points' coordinate system is relative to (0, 0) so if you'd like a
      top-center justified 10x20 rectangle you can do points [(-5, 0), (5, 0), (5, 20), (0, 20)] and your VectorShape
      x and y properties will position the rectangle relative to its top center point

* Rectangle
  A width and a height.
2020-05-09 15:38:22 -07:00
Sean Cross b168784fa0 aesio: add basic AES encryption and decryption
This adds initial support for an AES module named aesio.  This
implementation supports only a subset of AES modes, namely
ECB, CBC, and CTR modes.

Example usage:

```
>>> import aesio
>>>
>>> key = b'Sixteen byte key'
>>> cipher = aesio.AES(key, aesio.MODE_ECB)
>>> output = bytearray(16)
>>> cipher.encrypt_into(b'Circuit Python!!', output)
>>> output
bytearray(b'E\x14\x85\x18\x9a\x9c\r\x95>\xa7kV\xa2`\x8b\n')
>>>
```

This key is 16-bytes, so it uses AES128.  If your key is 24- or 32-
bytes long, it will switch to AES192 or AES256 respectively.

This has been tested with many of the official NIST test vectors,
such as those used in `pycryptodome` at
39626a5b01/lib/Crypto/SelfTest/Cipher/test_vectors/AES

CTR has not been tested as NIST does not provide test vectors for it.

Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-06 17:40:06 +08:00
Daniel Pollard bfa5cd9c13 refactor countio based on feedback 2020-05-05 15:23:38 +10:00
Lucian Copeland c6c77726e7 Merge remote-tracking branch 'upstream/master' into stm32-docfix 2020-04-23 13:39:48 -04:00
Lucian Copeland 8791ca6af3 implement requested changes 2020-04-23 13:33:41 -04:00
Lucian Copeland d0a2106547 Remove old build flags, add fixes for shared_matrix 2020-04-22 16:06:08 -04:00
Jeff Epler 5fcc6d6286 RGBMatrix: finish renaming from Protomatter
This gets all the purely internal references.  Some uses of
protomatter/Protomatter/PROTOMATTER remain, as they are references
to symbols in the Protomatter C library itself.
2020-04-17 18:44:07 -05:00
Jeff Epler 3d6258f63d Rename Protomatter -> RGBMatrix
This is a quick rename, it changes the user-facing names but not the
internal names of things.
2020-04-17 18:43:57 -05:00
Jeff Epler a32337718d Rename _protomatter -> protomatter
I originally believed that there would be a wrapper library around it,
like with _pixelbuf; but this proves not to be the case, as there's
too little for the library to do.
2020-04-17 18:43:57 -05:00
Jeff Epler 09dc46a984 Add Protomatter and FramebufferDisplay 2020-04-14 18:24:54 -05:00
Jeff Epler d6342af980 ulab: rename enable macro so it appears in the support matrix 2020-03-17 09:33:03 -05:00
Jeff Epler 473e9c5ffb f-strings: Make optional, defaulting to !CIRCUITPY_MINIMAL_BUILD
This should reclaim *most* code space added to handle f-strings.
However, there may be some small code growth as parse_string_literal
takes a new parameter (which will always be 0, so hopefully the optimizer
eliminates it)
2020-03-09 09:03:25 -05:00
Jeff Epler fa3b9eba92 ulab: Incorporate it 2020-02-27 11:03:03 -06:00
Dan Halbert e31ac710be Enable _bleio adapter when _bleio is imported 2020-02-20 21:55:04 -05:00
James Bowman acef93a253 Rename eveL to _eve, EVEL to _EVE 2020-02-05 18:17:58 -08:00
James Bowman 7fd30e7d20 First draft of eveL, the low-level module of the Gameduino (and BridgeTek EVE) bindings.
[adafruit/circuitpython#2578]
2020-02-03 16:46:14 -08:00
Hierophect 10eed78dd8 use CFLAG to properly set define 2020-01-08 17:37:20 -05:00
Marius-450 3ad3d49959 changes only for monster m4sk 2020-01-04 12:32:49 -05:00
Marius-450 d2b2cf0add CIRCUITPY_DISPLAY_LIMIT = 2 2020-01-04 12:20:32 -05:00
Scott Shawcroft b859e2b710
Remove `re` from CPX Displayio build to make space. 2019-12-20 11:43:56 -08:00
Dan Halbert 68ae47907c merge from upstream 2019-12-10 21:04:46 -05:00
Jeff Epler a08d9e6d8e audiocore: Add MP3File using Adafruit_MP3 library 2019-12-10 14:03:06 -06:00