Commit Graph

2095 Commits

Author SHA1 Message Date
Damien George 38bc5a9f67 stm32: Provide a custom BTstack runloop that integrates with soft timer.
It reschedules the BT HCI poll soft timer so that it is called exactly when
the next timer expires.

Signed-off-by: Damien George <damien@micropython.org>
2021-06-23 13:14:26 +10:00
Damien George 74c2c31811 stm32/mpbthciport: Change from systick to soft-timer for BT scheduling.
Instead of using systick the BT subsystem is now scheduled using a soft
timer.  This means it is scheduled only when it is enabled.

Signed-off-by: Damien George <damien@micropython.org>
2021-06-23 13:14:26 +10:00
Damien George 60f1f76984 stm32/softtimer: Add soft_timer_reinsert() helper function.
And call mp_pairheap_init_node() in soft_timer_static_init() so that
reinsert can be called after static_init.

Signed-off-by: Damien George <damien@micropython.org>
2021-06-23 13:14:26 +10:00
Michael Weiss b3a34dde36 esp32,esp8266: Add __len__ to NeoPixel driver to support iterating.
Signed-off-by: mishafarms <github@mishafarms.us>
2021-06-22 16:33:55 +10:00
Damien George bbf9dd849a esp32/boards/sdkconfig.base: Disable MEMPROT_FEATURE to alloc from IRAM.
Dynamically generate/loaded native code (eg from @micropython.native or
native .mpy files) needs to be able allocate from IRAM, and the memory
protection feature must be disabled for that to work.  Disabling it is
needed to get native code working on ESP32-S2 and -C3.

Signed-off-by: Damien George <damien@micropython.org>
2021-06-20 22:54:20 +10:00
David Lechner 259d9b69fe py/mpstate: Schedule KeyboardInterrupt on main thread.
This introduces a new macro to get the main thread and uses it to ensure
that asynchronous exceptions such as KeyboardInterrupt (CTRL+C) are only
scheduled on the main thread. This is more deterministic than being
scheduled on a random thread and is more in line with CPython that only
allow signal handlers to run on the main thread.

Fixes issue #7026.

Signed-off-by: David Lechner <david@pybricks.com>
2021-06-19 09:49:00 +10:00
David Lechner ca920f7218 py/mpstate: Make exceptions thread-local.
This moves mp_pending_exception from mp_state_vm_t to mp_state_thread_t.
This allows exceptions to be scheduled on a specific thread.

Signed-off-by: David Lechner <david@pybricks.com>
2021-06-19 09:43:44 +10:00
Damien George eb7ae538f9 esp8266/boards/GENERIC_512K: Add custom minimal _boot.py.
Commit 0abf6f830c removed _boot.py from the
manifest for the GENERIC_512K board because the build does not include a
filesystem.  But the main code expects _boot.py to be there and prints an
error if it's not.  So add a custom _boot.py, which just sets the
gc.threshold().

Signed-off-by: Damien George <damien@micropython.org>
2021-06-18 14:13:18 +10:00
Damien George 4eb13c50cd esp32/machine_sdcard: Use deinit_p to deinit SD bus in SPI mode.
Fixes issue #7352.

Signed-off-by: Damien George <damien@micropython.org>
2021-06-18 09:55:22 +10:00
Jonathan Hogg 89945b1989 esp32/machine_hw_spi: Allow None for unused pins in initializer.
Make the hardware SPI initializer method match the `init()` method by 
allowing `None` to be given for `sck`/`mosi`/`miso` to specify an unused 
signal.
2021-06-17 18:52:22 +10:00
Thomas Wenrich 060066804a esp32/modnetwork: Add "reconnects" option to WLAN STA interface.
This adds a wlan.config(reconnects=N) option to set the number of reconnect
attempts that will be made if the WLAN connection goes down.  The default
is N=-1 (infinite retries, current behavior).  Setting
wlan.config(reconnects=0) will disable the reconnect attempts.

A nice side effect of reconnects=0 is that wlan.status() will report the
disconnect reason now.  See related issue #5326.
2021-06-17 18:48:06 +10:00
Tobias Eydam 48437cec45 esp32/network_lan: Add Ethernet support for IDF v4.1 and above.
Ethernet-PHYs from ESP-IDF (LAN8720, IP101, RTL8201, DP83848) are now
supported in IDF v4.1 and above.  PHY_KSZ8041 is only for ESP-IDF 4.3 and
above.  ESP32S2 is not supported.

Signed-off-by: Tobias Eydam <eydam-prototyping@outlook.com>
2021-06-17 15:36:14 +10:00
robert-hh 8edc3aacdd mimxrt/modutime: Extend the time module.
Methods added:
- time.time()
- time.time_ns()
- time.gmtime()
- time.localtime()
- time.mktime()

The rp2 port was uses as the template for the change.
2021-06-16 01:50:09 +10:00
robert-hh 7417c6ac91 mimxrt/machine_pin: Implement pin.irq() functionality. 2021-06-16 01:42:10 +10:00
robert-hh 689476c576 mimxrt/machine_uart: Add the UART class to the machine module.
The implementation uses the LPUARTx devices.  Up to 8 UARTs can be used,
given that the pins are accessible.  E.g. 8 on Teensy 4.1, 5 on
MIMXRT1020_EVK.

For Tennsy 4.0 and 4.1 the UART numbers are as printed on the pinout 1..N.
The MIMXRT10xx-EVK boards have only one UART named, which gets the number
1.  All other UART are assigned to different Pins:

MIMXRT1010-EVK:
    D0/D1   UART 1
    D6/D7   UART 2
    A0/D4   UART 3

MIMXRT1020-EVK:
    D0/D1   UART 1
    D6/D9   UART 2
    D10/D12 UART 3
    D14/D15 UART 4
    A0/A1   UART 5

MIMXRT1050-EVK, MIMXRT1060-EVK, MIMXRT1064-EVK:
    D0/D1   UART 1
    D7/D6   UART 2
    D8/D9   UART 3
    A1/A0   UART 4
2021-06-16 01:21:15 +10:00
Pavol Rusnak 95048129b1 unix: Fix build on arm64-darwin due to integer cast.
This fixes error: cast to smaller integer type 'int' from 'pthread_t'.
pthread_t is defined as long, not as int.

Signed-off-by: Pavol Rusnak <pavol@rusnak.io>
2021-06-15 00:08:24 +10:00
Krzysztof Adamski e7f7094ef6 rp2/machine_rtc: Check return value from rtc_set_datetime.
The rtc_set_datetime() from pico-sdk will validate the values in the
datetime_t structure and refuse to set the time if they aren't valid. It
makes sense to raise an exception if this happens instead of failing
silently which might be confusing (as an example, see:
https://github.com/micropython/micropython/pull/6928#issuecomment-860166044
).
2021-06-15 00:06:26 +10:00
iabdalkader 66115a3744 stm32/eth: Fix eth_link_status function to use correct BSR bit.
Fixes #7346.
2021-06-13 12:29:11 +10:00
iabdalkader 51614ce365 stm32/eth: Add low-power mode configuration option.
Add low power functionality configurable with:

    lan.config(low_power=True/False)
2021-06-13 12:27:33 +10:00
robert-hh 3ab8806c0d mimxrt/machine_rtc: Maintain microsecond offset.
The supplied value for microseconds in datetime() will be treated as a
starting value for the reported microseconds.  Due to internal processing
in setting the time, there is an offset about 1 ms.
2021-06-12 23:20:12 +10:00
robert-hh fd4eec5555 mimxrt/machine_rtc: Change RTC.datetime() tuple to match other ports.
This change moves the datetime tuple format back to the one used by all the
other ports:

    (year, month, day, weekday, hour, minute, second, microsecond)

Weekday is a number between 0 and 6, with 0 assigned to Monday.  It has to
be provided when setting the RTC with datetime(), but will be ignored on
entry and calculated when needed.

The weekday() method was removed, since that is now again a part of the
datetime tuple.

The now() method was updated so it continues to return a tuple that matches
CPython's datetime module.
2021-06-12 23:15:05 +10:00
Krzysztof Adamski 37d01d4be3 rp2/machine_rtc: Add initial support for RTC.
Initial support for machine.RTC on rp2 port. It only supports datetime()
method and nothing else. The method gets/returns a tuple of 8 items, just
like esp32 port, for example, but the usec parameter is ignored as the RP2
RTC only works up to seconds precision.

The Pico RTC isn't very useful as the time is lost during reset and there
seems to be no way to easily power up just the RTC clock with a low current
voltage, but still there seems to be use-cases for that, see issues #6831,
and a Thonny issue #1592. It was also requested for inclusion on v1.15
roadmap on #6832.

Signed-off-by: Krzysztof Adamski <k@japko.eu>
2021-06-12 23:02:54 +10:00
IhorNehrutsa da8aad18a4 esp32/README: Describe how to select compatible version of existing IDF. 2021-06-11 19:52:10 +10:00
noslaver f314cac604 esp32/partitions-2MiB.csv: Update table so firmware fits.
The current MicroPython app size is larger than the size allocated in the
partitions table.
2021-06-11 17:57:40 +10:00
Damien George 865abba197 esp32/makeimg.py: Load sizes from partition table and verify data fits.
Changes introduced are:
- the application offset is now loaded from the partition table instead of
  being hard-coded to 0x10000
- maximum size of all sections is computed using the partition table
- an error is generated if any section overflows its allocated space
- remaining bytes are printed for each section

Signed-off-by: Damien George <damien@micropython.org>
2021-06-11 15:43:49 +10:00
Damien George 61f91de361 stm32/sdram: Prevent array-bounds warnings with GCC 11.
Signed-off-by: Damien George <damien@micropython.org>
2021-06-10 22:48:54 +10:00
Damien George cf849d84b9 stm32/boards: Enable MICROPY_HW_SPIFLASH_ENABLE_CACHE on VCC_GND boards.
Because these boards use the SPI flash cache in their bdev.c configuration.

Signed-off-by: Damien George <damien@micropython.org>
2021-06-10 22:48:17 +10:00
Damien George 71e3538a32 stm32/usb: Add USB_VCP.irq method, to set a callback on USB data RX.
Usage:

    usb = pyb.USB_VCP()
    usb.irq(lambda u:print(u, u.read()), usb.IRQ_RX)

Signed-off-by: Damien George <damien@micropython.org>
2021-06-10 15:26:21 +10:00
Zoltán Vörös 8c02b94946 nrf: Add more math sources to Makefile, and enable log2 implementation.
This commit adds a few math functions to the source list in the Makefile,
and implements the log2f function, so that ulab can be compiled on the nrf
boards.  It also addresses part of #5162.
2021-06-08 16:39:47 +10:00
Abilio Marques 525a920ca5 unix/modffi: Fix conversion between Python integers and ffi types.
This commit fixes the following problems converting to/from Python integers
and ffi types:
- integers of 8 and 16 bits not working on big endian
- integers of 64 bits not working on 32 bits architectures
- unsigned returns were converted to signed Python integers

Fixes issue #7269.
2021-06-08 13:06:17 +10:00
Damien George d00523ba0c zephyr/boards: Enable ubluetooth on nucleo_wb55rg board.
Signed-off-by: Damien George <damien@micropython.org>
2021-06-06 21:57:44 +10:00
Damien George 80e79a777d zephyr: Add initial ubluetooth module integration.
Currently only advertising and scanning are supported, using the ring
buffer for events (ie not synchronous events at this stage).

The ble_gap_advertise.py multi-test passes (tested on a nucleo_wb55rg
board).

Signed-off-by: Damien George <damien@micropython.org>
2021-06-06 21:57:06 +10:00
Maureen Helm 5cb2ade65b zephyr: Update to Zephyr v2.6.0.
Updates the zephyr port build instructions and CI to use the latest
zephyr release tag.

Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2021-06-06 20:17:42 +10:00
Maureen Helm 3331b1811d zephyr: Disable CONFIG_NET_SOCKETS_POSIX_NAMES.
Zephyr's default value for CONFIG_NET_SOCKETS_POSIX_NAMES was changed
from false to true between Zephyr v2.5.0 and v2.6.0. This caused
conflicts in MicroPython, which uses the zsock_ prefixed functions, so
disable it.

Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2021-06-06 20:17:42 +10:00
Maureen Helm f17c0db5f7 zephyr: Update disk access configuration for Zephyr v2.6.0.
Zephyr's Kconfig symbols and defaults for SDHC/SDMMC disk drivers and
the disk access subsystem were reworked between Zephyr v2.5.0 and
v2.6.0. Update MicroPython accordingly.

Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2021-06-06 20:17:42 +10:00
Damien George 36cb365cad unix/main: Increase stack limit on ARM architectures.
Signed-off-by: Damien George <damien@micropython.org>
2021-06-05 11:03:09 +10:00
leo chung fad0efdcf2 esp32/Makefile: Fix wrong target for partition-table.bin.
"$(BUILD)/partition_table/partition  -table.bin" is typing mistake.

Signed-off-by: leo chung <gewalalb@gmail.com>
2021-06-04 01:04:35 +10:00
robert-hh 53fea8598e mimxrt/boards: Add board configuration files for Teensy 4.1.
These are at the moment more or less identical to the Teensy 4.0 files,
except for the pins.csv file and the flash size.
2021-06-04 01:00:39 +10:00
Philipp Ebensberger b8c65b174f mimxrt/machine_adc: Add the ADC class to the machine module.
This adds the machine.ADC class with the read_u16() method.  make-pins.py
and supporting files are updated to generate ADC information.
2021-06-04 00:51:58 +10:00
robert-hh bbdc98f72e mimxrt: Enable many Python and some extmod features.
Besides Python features this includes the extmod modules which make use of
the Pin module, especially machine.softSPI, machine.SoftI2C and onewire.
2021-06-04 00:38:18 +10:00
robert-hh a40e1473dc mimxrt: Add floating point support.
Since not all boards support double fp, all board specific .mk files are
affected too.
2021-06-04 00:37:22 +10:00
robert-hh 2f365d234e mimxrt/machine_rtc: Add the RTC class to the machine module.
Initial version, using the LP RTC clock.  It provides setting the date and
time with rtc.init() or rtc.datetime(), and reading the date and time with
rtc.datetime() or rtc.now().  The method weekday() reports the weekday of
the current date.  It starts with 0 for Monday.

The tuple order for datetime() and now() matches the CPython sequence:
(year, month, day, hour, minute, second, microsecond, TZ).  TZ is ignored
and reported as None.  Microsecond is provided at a best effort.

If a battery is not supplied, the default boot date/time is 1970/1/1 0:0:0.
With a battery, the clock continues to run even when the board is not
powered.  The clock is quite precise.  If not, using rtc.calibration() may
help.
2021-06-03 15:24:04 +10:00
robert-hh d79105d7c0 mimxrt/machine_timer: Leave the Timer clock source at IPG clock.
Setting it to OSC_CLK interferes the utime module's functionality.  This is
still an area demanding an understanding.
2021-06-03 13:03:02 +10:00
robert-hh cdd95ce737 mimxrt/machine_timer: Reuse any existing timer objects.
So there is a 1-1 mapping of hardware timer to Python object.
2021-06-03 13:02:51 +10:00
robert-hh 5226d6e1ee mimxrt: Remove __WFE() from MICROPY_EVENT_POLL_HOOK.
The device is unreliable with the WFE included.  This needs further
investigation.
2021-06-03 12:21:36 +10:00
robert-hh 4c407c790f mimxrt: Add the Timer class to the machine module.
It supports three hardware timer channels based on the PIT timers of the
MIMXRT MCU.  The timer id's are 0, 1 and 2.  On soft reboot all active
timers will be stopped via finalisers.
2021-06-02 00:33:13 +10:00
robert-hh 745b4319a2 mimxrt/boards/TEENSY40: Re-create the flash FS after deploy.
This is required since the Teensy Halfkay loader attempts to erase all of
the flash but fails to do so, at least in my tests.  Formatting brings it
back to a known state.
2021-06-01 23:52:45 +10:00
robert-hh dfd4324eb1 mimxrt: Add flash storage support with VFS and littlefs filesystem.
This commit adds full support for a filesystem on all boards, with a block
device object mimxrt.Flash() and uos.VfsLfs2 enabled.

Main changes are:
- Refactoring of linker scripts to accomodate reserved area for VFS.  VFS
  will take up most of the available flash. 1M is reserved for code.  9K is
  reserved for flash configuration, interrupts, etc.
- Addition of _boot.py with filesystem init code, called from main.c.
- Definition of the mimxrt module with a Flash class in modmimxrt.[ch].
- Implementation of a flash driver class in mimxrt_flash.c.  All flashing
  related functions are stored in ITCM RAM.
- Addition of the uos module with filesystem functions.
- Implementation of uos.urandom() for the sake of completeness of the uos
  module.

It uses sample code from CircuitPython supplied under MIT license, which
uses the NXP SDK example code.

Done in collaboration with Philipp Ebensberger aka @alphaFred who
contributed the essential part to enable writing to flash while code is
executing, among other things.
2021-06-01 23:42:57 +10:00
robert-hh c303b15f10 mimxrt: Enable frozen modules. 2021-06-01 22:57:09 +10:00
robert-hh fdaf2b80d9 mimxrt: Add custom help text and enable help("modules"). 2021-06-01 22:52:44 +10:00