4ec803a42a
all: Make static dicts use mp_rom_map_elem_t type and MP_ROM_xxx macros.
2017-08-21 21:34:23 +10:00
55f33240f3
all: Use the name MicroPython consistently in comments
...
There were several different spellings of MicroPython present in comments,
when there should be only one.
2017-07-31 18:35:40 +10:00
076b80467b
cc3200: Enable UART REPL by default.
...
To allow access and testing without complex access methods like WiFi.
Enabled for both WiPy and TI LaunchXL.
2016-12-28 14:57:36 +03:00
73c9f85b4c
cc3200: Simplify the Timer API and correct the documents.
...
Make the PWM duty cycle configurable from 0.00 to 100.00 by
accepting values from 0 to 10000.
Add automatic Pin assignment when operating in PWM mode.
2016-02-21 21:53:16 +01:00
dbdcb58d64
cc3200: New irq API, affects all classes that provide the irq method.
2015-09-27 01:48:20 +02:00
dffa9f6da6
cc3200: New SD and RTC API plus os and time modules' extensions.
2015-09-21 22:30:32 +02:00
22b4c28f85
cc3200: New ADC API.
2015-09-16 10:10:38 +02:00
425958b616
cc3200: Add SDcard pin af on index 8.
2015-09-10 08:00:41 +02:00
f91f212d9f
cc3200: New UART API plus related test.
2015-09-10 07:59:47 +02:00
36821d095a
cc3200: Add alternate functions list to Pin object.
...
Also remove pin.high() and pin.low() methods.
2015-09-10 07:59:41 +02:00
d5e256486e
cc3200: Re-work Pin class according to the new API.
...
Also add relevant test.
2015-09-10 07:59:35 +02:00
e3f8777ee8
cc3200: Implement new Pin API.
2015-09-10 07:59:03 +02:00
007878781c
cc3200: Rename pins from GPIO to just GP.
...
This is how the names will be printed on the sticker that goes on top
of the EMI shield. The shorter names also help saving a few bytes of
RAM and ROM.
2015-07-30 00:43:08 +02:00
a3acaa000c
cc3200: Add antenna selection feature to WLAN.
2015-06-07 00:06:27 +02:00
78744c4f7a
cc3200: Remove WIPY-SD variant, and make the WiPy the default board.
2015-05-28 13:22:26 +02:00
d07de2d307
cc3200: Move the STDIO UART pin configuration to mpconfigboard.h.
2015-05-27 09:45:29 +02:00
2dd47239de
cc3200: Make API more similar to stmhal.
...
In general the changes are:
1. Peripheral (UART, SPI, ADC, I2C, Timer) IDs start from 1, not zero.
2. Make I2C and SPI require the ID even when there's only one bus.
3. Make I2C and SPI accept 'mode' parameter even though only MASTER
is supported.
2015-05-25 21:47:19 +02:00
f81684141e
cc3200: Implement os.uname() to get details of the OS and hardware.
2015-04-29 00:03:56 +02:00
18bd51707c
cc3200: Enable the stdio UART for the LaunchXL only.
2015-04-07 12:12:16 +02:00
b9d850227d
cc3200: Add WLAN AP specific settings for each board.
2015-04-04 22:09:55 +02:00
d460a30711
cc3200: Add specific version file for the CC3200 port.
...
Current version has been numbered as 0.9.0 since Timers/PWM support
is still missing.
2015-03-31 14:34:09 +02:00
4be44014ab
cc3200: Reenable active interrupts when waking from suspended mode.
2015-03-26 13:58:58 +01:00
2d717ad97a
cc3200: Add callback support to the UART for RX interrupts.
2015-03-26 10:28:43 +01:00
26d230419c
cc3200: Add GPIO25 to the pins list of the WiPy and the WiPy-SD.
...
This allows to properly initialize the system led and add it
to the sleep module so that it can be restored when resuming
from suspended mode.
2015-03-25 15:22:32 +01:00
4729a212b1
cc3200: Rename the WiPy_SD to WiPy-SD.
2015-03-25 15:22:27 +01:00
5dd8ae6b9c
cc3200: Fix spaces aligment in LAUNCHXL/mpconfigboard.h
2015-03-16 00:42:13 +01:00
b2cb75efb7
cc3200: Remove double administration of callback objects.
2015-03-16 00:42:09 +01:00
d1ba8b7659
cc3200: Correct WiPy's pinout and the pin generation script.
2015-03-12 16:22:15 +01:00
8cbbaa052a
cc3200: Add WiPy and WiPy_SD board support.
2015-03-11 17:00:38 +01:00
9e44383e3f
cc3200: Add power management framework. Add mpcallback class.
...
Supports suspend and hibernate modes. Waking is possible throug GPIO
and WLAN.
The mpcallback class is generic and can be reused by other classes.
2015-03-11 17:00:33 +01:00
73aee8da54
cc3200: Merge ExtInt class into Pin class.
...
Also add another method to change the pin's interrupt mode
on the fly.
2015-03-11 17:00:28 +01:00
d226dd2f59
cc3200: Add preliminary low power deep sleep support.
2015-03-11 16:54:09 +01:00
7a074a14ce
cc3200: Implement safe boot pin and system led behaviour.
...
The safe boot pin, when pulled high during reset rolls back the
firmware to the "factory" image and skips execution of 'boot.py'
and 'main.py'. This is useful to recover from a crash condition.
The system led is used mostly to signal errors.
2015-02-25 23:17:17 +01:00
4a23a01945
cc3200: Add explicit py/ path-prefix for py includes.
...
This is how it should be, so one knows exactly where the includes are
coming from.
2015-02-21 18:58:43 +00:00
c020109cfa
cc3200: Add SD module and disable SD card support for the LAUNCHXL.
2015-02-21 14:19:40 +01:00
6b21c3fdd6
cc3200: Refactor UART and I2C object creation.
...
I2C objects can be freed by the GC and a __del__ method is provided
in order to de-init the peripheral prior to being garbage collected.
UART objects are now added to a local list and this list is now part
of the VM_STATE.
2015-02-20 16:41:55 +01:00
53716fcc3e
cc3200: Rename GPIO module to Pin.
...
This change helps making the cc3200 port API a bit closer to stmhal.
The ramaining differences are due to the specific hardware details
of each chip. One feature that has been deliberately disabled is the
possibility to add custom names and custom pin mappings. Those
features are nice and convenient, but in this port, code size is a
major concern.
2015-02-09 20:01:54 +01:00
8785645a95
cc3200: Add cc3200 port of MicroPython.
...
The port currently implements support for GPIO, RTC, ExtInt and the WiFi
subsystem. A small file system is available in the serial flash. A
bootloader which makes OTA updates possible, is also part of this initial
implementation.
2015-02-06 22:10:11 +00:00
Damien George
Alexander Steffen
Paul Sokolovsky
danicampora
danicampora