Kevin Townsend
0388a57f77
Merge pull request #614 from arturo182/nrf_pca10040
...
nrf: Fix pca10040 support
2018-02-12 16:31:14 +01:00
Kevin Townsend
5d99cd0a20
Merge pull request #601 from arturo182/nrf_cleanup
...
Nrf cleanup
2018-02-12 11:28:47 +01:00
arturo182
f1d8a2d149
nrf: Fix memory misalignment during flash write
2018-02-10 14:43:58 +01:00
Scott Shawcroft
0397202288
m4 compiles, pwmout implemented but TC0 (A1) doesn't run
2018-02-09 17:21:06 -08:00
Scott Shawcroft
0398f308fa
m4 compiles, pwmout implemented
2018-02-09 16:37:27 -08:00
Scott Shawcroft
190e7d629e
WIP
2018-02-09 16:37:27 -08:00
Dan Halbert
b001c0711b
Correct _etext location; clean up .ld files
...
1. Make _extext and _sidata coincide. Old _etext location did not include
.ARM.exidx sections, which were usually absent but not always. So flash
data was copied to RAM in wrong place.
2. Use decimal constants with "K" and "M" suffixes in .ld files instead
of hex constants, to make them easier to read and check for accuracy.
2018-02-09 11:31:18 -05:00
Dan Halbert
6be6df6ae4
Merge pull request #609 from tannewt/bitbangio
...
Enable bitbangio now that we have digitalio.
2018-02-08 21:24:32 -05:00
Scott Shawcroft
3e63f59867
Use write instead of set because it clears the bits before setting them.
2018-02-08 16:12:33 -08:00
Scott Shawcroft
aeae0090af
Enable bitbangio now that we have digitalio.
...
Also remove a rogue neopixel_write.
2018-02-08 16:03:05 -08:00
Scott Shawcroft
82bc11585e
ports/atmel-samd: Re-enable analogio
...
This introduces SAMD51 support and re-enables SAMD21 support.
Fixes #263
2018-02-08 14:48:08 -08:00
Scott Shawcroft
3e79638b9c
Merge pull request #603 from siddacious/SAMD51G_support
...
Added SAMD51G support as per issue #597
2018-02-08 09:55:48 -08:00
Kevin Townsend
e5f0cfcf20
Merge pull request #604 from arturo182/nrf_bitbangio
...
nrf: Use the shared bitbangio module
2018-02-08 09:57:44 +01:00
Bryan Siepert
dfc2b82ede
Added SAMD51G support as per issue #597
2018-02-07 21:23:25 -08:00
Kevin Townsend
71128b575f
Merge pull request #602 from arturo182/nrf_struct
...
nrf: Use the shared struct module
2018-02-08 00:56:31 +01:00
arturo182
a7cde0e49a
nrf: Fix pca10040 support
...
Works with no SD, or s132 2.0.1 and 5.0.0.
2018-02-07 23:41:21 +01:00
arturo182
381f47bfb0
nrf: Only support SD 132 v2.0.1 and v5.0.0 and SD 140 v6.0.0
2018-02-07 22:44:27 +01:00
arturo182
8bfdaa89b9
nrf: Remove SAMD mentions carried over while copying files
2018-02-07 22:44:27 +01:00
arturo182
05bd5d4ee6
nrf: Remove nRF51 boards and files, update README
2018-02-07 22:44:13 +01:00
arturo182
29ae4cdd1c
nrf: Fix building pca10056 without SD
2018-02-07 22:41:26 +01:00
arturo182
47c8e20e5a
nrf: Make sure to not use SD functions when SD not available
2018-02-07 22:41:20 +01:00
Kevin Townsend
9d191f7f9f
Merge pull request #589 from arturo182/nrf_gamepad
...
nrf: Implement ticks, add gamepad module and example
2018-02-07 22:17:05 +01:00
arturo182
afaee7f782
nrf: Use the shared bitbangio module
2018-02-07 00:03:23 +01:00
arturo182
021df5d3d3
nrf: Cleanup AnalogOut and throw an exception in constructor
...
The nRF MCUs do not support analog output. Throwing an exception
in the constructor will stop users from creating an instance of
the AnalogOut class.
In the future we can ifdef-out the whole class so it is not available
in the module at all.
2018-02-06 21:15:49 +01:00
Kevin Townsend
c433a82082
Merge pull request #573 from arturo182/master
...
nRF port improvements and pca10056 support
2018-02-06 15:26:40 +01:00
arturo182
d1b2f69771
nrf: Use the shared struct module
2018-02-05 20:50:06 +01:00
arturo182
1de2ee6884
nrf: Implement ticks, add gamepad module and example
2018-02-05 20:48:25 +01:00
arturo182
76f5c01798
nrf: Get the port working on pca10056 (nRF52840)
2018-02-05 20:38:41 +01:00
arturo182
a64b5c84de
nrf: Fix missing LED GPIO initialization
...
led_init was never called, which means the GPIOs were never set to
output and the LEDs didn't work.
2018-02-03 13:51:11 +01:00
arturo182
6731b47d5a
nrf: Implement MCU temperature reading
...
If softdevice is available and enabled the SD function will be used,
otherwise use MCU registers.
2018-02-02 20:33:21 +01:00
arturo182
c6a542d166
nrf: Add SD 6.0.0-6.alpha to the download script
2018-02-02 20:31:47 +01:00
arturo182
fed9087274
nrf: Add flash section for fatfs for no SD pca10056
2018-02-02 20:31:47 +01:00
arturo182
616cbc6271
nrf: Use more generic header
...
It will include the mcu-specific header based on defines.
2018-02-02 20:31:47 +01:00
arturo182
d0b451be94
nrf: Use the right SPI registers on nRF52840
2018-02-02 20:31:47 +01:00
arturo182
a776c2a51c
nrf: Fix errorneous indent
...
Otherwise we get the "recipe commences before first target" messsage.
2018-02-02 20:31:47 +01:00
Dan Halbert
eb49359aec
CPX: typo in mpconfigboard.h broke CIRCUITPY
2018-01-30 15:48:22 -05:00
Dan Halbert
64831f4e7d
add SPI.frequency to nRF
2018-01-30 13:23:00 -05:00
Dan Halbert
e550b024c5
atmel-samd: Correct computation of SPI baud rate.
...
all: Add .frequency read-only property for busio.SPI to return actual frequency.
Fix esp8266/posix_helpers.c, which was not up to date for the new
long-lived/short-lived heap allocation scheme.
2018-01-30 12:08:41 -05:00
Dan Halbert
a1e279a9d8
Merge pull request #556 from python-ugame/ugame10-3.0
...
Update ugame port for the final ugame10 version
2018-01-29 13:35:06 -08:00
Radomir Dopieralski
d595a03bbd
Update ugame port for the final ugame10 version
...
There have been multiple uGame prototypes with differences in the pins
and other details. This updates the board definition to fit the final
uGame 10 design.
2018-01-29 22:19:09 +01:00
Radomir Dopieralski
189c62ac7d
Bring back the _stage library
...
I have tested the _stage module, and it works fine, so I'm including it
in he sources again. It's still disabled by default in the
mpconfigport.h.
2018-01-29 21:24:46 +01:00
Dan Halbert
efbf08266b
make _estack be double-word aligned
2018-01-24 19:24:36 -05:00
Scott Shawcroft
6560596864
Switch to m_malloc_maybe and m_free to reduce our dependence on gc_alloc.
...
gc_alloc's API is changing and we shouldn't need to care about it.
So, we switch to m_malloc which has the default behavior we expect.
2018-01-23 16:45:07 -08:00
sommersoft
fe851fc15e
re-added header inlcusion for system_get_chip_id
2018-01-23 13:50:24 -08:00
brentrubell
ab1f133667
issue #536 CPX change SPI pin designations to externally available pins ( #540 )
...
* issue #536 CPX
* switched pin assignment
2018-01-22 19:31:55 -08:00
Tony DiCola
4bd1d09d74
Add missing Feather M0 RadioFruit boards: RFM69, RFM9x ( #539 )
2018-01-19 11:53:47 -08:00
sommersoft
44bc1711aa
Added Unique ID Functions/Updated Support Matrix ( #527 )
...
shared_bindings/index.rst: updated Support Matrix format as discussed in PR #503 & Issue #448 .
shared-bindings/microcontroller/Processor.c & .h: added UID lookup functionality for use with all ports. Fixes #462 .
2018-01-18 11:39:11 -08:00
hathach
dfa6b6e9c5
add Ctrl+C for REPL over bleuart
2018-01-18 11:32:47 -08:00
Kevin Townsend
d5af898999
Added note on REPL over NUS
2018-01-18 11:32:47 -08:00
hathach
5e6f113779
add REPL via bleuart
2018-01-18 11:32:47 -08:00
microbuilder
fda065ea89
Minor scan example cleanup
2018-01-18 11:32:47 -08:00
microbuilder
e2ebcbe514
Simple BLE scanner example
2018-01-18 11:32:47 -08:00
microbuilder
1276c12097
Enable SD132v2.0.1 BLE and UBLUEPY support by default
2018-01-18 11:32:47 -08:00
Dan Halbert
23eb79ca8f
turn on MICROPY_ENABLE_SOURCE_LINE in nrf
2018-01-16 18:11:54 -08:00
Dan Halbert
01443a9619
Make chosen features consistent across all boards and ports atmel-samd, esp8266, and nrf.
...
1. Turn off MICROPY_CPYTHON_COMPAT, which includes a number of minor CPython compatibility features,
most of which have workarounds, but uses up significant flash.
2. Turn on MICROPY_PY_SYS_MAXSIZE, which implements sys.maxsize.
3. Turn on MICROPY_CAN_OVERRIDE_BUILTINS, which implements "_" as the most recent value in the REPL,
and also enables redefining builtins.
2018-01-16 18:11:54 -08:00
Dan Halbert
2d5483082d
Checked wrong RCAUSE bit for system_reset
2018-01-08 15:45:07 -08:00
Dan Halbert
1805bcac76
enable use of CIRCUITPY_CANARY_WORD (needed for 2.2 merge) ( #513 )
...
enable use of CIRCUITPY_CANARY_WORD (needed for 2.2 merge)
RCAUSE (reset cause) is fetched differently in SAMD21 vs SAMD51
2018-01-08 09:44:06 -08:00
Dan Halbert
d0cc8abd31
revise boards/ files for 3.0. All now compiled (but I don't have all to test).
2018-01-04 14:16:53 -05:00
Dan Halbert
19d353ccd9
nrf: fixups for changes from 2.2
...
1. bidirectional SPI support (@microbuilder please check)
2. slight changes in DigitalIO types
3. placeholders (not implemented yet) for single/double-click bootloader support
2018-01-03 16:50:57 -05:00
Dan Halbert
d8686cc002
use correct LD_FILE in mpconfigboard.mk for boards with external flash
2018-01-03 16:49:38 -05:00
Dan Halbert
065e82015f
merge from 2.2.0 + fix up board defs
2018-01-02 21:25:41 -05:00
Dan Halbert
ce81c8dda9
Avoid gcc 7.2.1 compiler issues in nlr_push() ( #506 )
...
Avoid gcc 7.2.1 compiler issues in nlr_push()
2018-01-02 13:41:34 -08:00
hathach
a997ab258e
spacing clean up
2017-12-29 23:07:32 +07:00
hathach
7f79a0e78c
added Ctrl+C interrupt
2017-12-29 22:43:31 +07:00
hathach
a021a9e5f0
update uart to remove dependency on machine uart module
2017-12-29 21:25:43 +07:00
microbuilder
178925640b
Moved comment to avoid abbreviation
2017-12-27 21:13:39 +01:00
microbuilder
a14bfeba64
Merge branch 'nrf52_3.x' of github.com:microbuilder/circuitpython into nrf52_3.x
2017-12-22 12:03:41 +01:00
microbuilder
60feb1a9aa
Added .gitattributes for ZIP bin support
2017-12-22 12:03:25 +01:00
Kevin Townsend
b3928288f0
Add files via upload
2017-12-22 12:02:15 +01:00
Kevin Townsend
8dcd9cc35c
Delete feather52_bootloader_5.0.0_s132_single.zip
2017-12-22 12:00:41 +01:00
Kevin Townsend
de72f7fabb
Delete feather52_bootloader_2.0.1_s132_single.zip
2017-12-22 12:00:34 +01:00
microbuilder
ad7cd0399d
Added 'mp_raise_NotImplementedError(NULL)'
2017-12-22 11:48:07 +01:00
microbuilder
b9e229f739
Removed old code snippets
2017-12-22 11:47:15 +01:00
microbuilder
ace872bf11
Added 'mp_raise_NotImplementedError(NULL)'
2017-12-22 11:45:51 +01:00
microbuilder
a3289c3c2f
Added D13 for standard LED examples
2017-12-22 11:42:33 +01:00
microbuilder
393bc9bce9
Removed leftover code snippet
2017-12-22 11:39:40 +01:00
microbuilder
c868b66f5b
Minor typo removed in path
2017-12-22 11:33:17 +01:00
microbuilder
99dd0a61ff
Spaces to tabs
2017-12-22 11:29:39 +01:00
microbuilder
60a23f0fb6
nRF52 update with internal file system support
2017-12-21 13:49:14 +01:00
Dan Halbert
72c911be97
Support SPI flash chips for CIRCUITPY, using non-DMA SPI for now.
2017-11-27 21:00:24 -05:00
Stewart
fb1dcd326d
ports/atmel-samd: feather_m0_adalogger readme updates ( #460 )
...
- Added D4 and moved associated SD_CS so that they are paired within list
- Added D7 and SD_CD which is the SD Card Detect pin
- Added D8 and GREEN_LED
- Added RED_LED associated with D13
- Added Setup information regarding arm complier packages
- README - Updated to reflect that feather_m0_adalogger microSD is supported
2017-11-26 21:10:01 -08:00
Stewart Colborne
5eb7958425
ports/atmel-samd/boards/feather_m0_adalogger/pins: Added missing pins
...
- Added D4 and moved associated SD_CS so that they are paired within list
- Added D7 and SD_CD which is the SD Card Detect pin
- Added D8 and GREEN_LED
- Added RED_LED associated with D13
2017-11-25 22:00:32 -08:00
Kevin Townsend
ce75a21e50
Revert "Supervisor REPL support for ports/nrf/boards/feather52"
...
This reverts commit 92113dde81
.
2017-11-23 13:38:38 +01:00
Kevin Townsend
92113dde81
Supervisor REPL support for ports/nrf/boards/feather52
2017-11-23 09:22:11 +01:00
mrmcwethy
e0eae5cb2a
Enable the Neopixel status light on Metro M0 Express and Feather M0 Express boards
2017-11-21 14:39:56 -08:00
Dan Halbert
6f662e9bbc
samd51 peripheral clocks were defined as 12MHz, but were really 120MHz
2017-11-20 21:11:30 -08:00
Dan Halbert
a9f75a71c5
Merge pull request #443 from dhalbert/3.0_spi
...
non-DMA SPI working; adding this now for testing; will continue with DMA
2017-11-16 19:28:24 -05:00
Dan Halbert
312444bbd2
non-DMA SPI working; adding this now for testing; will continue with DMA
...
Also, fixed pin mappings for rev B Metro M4:
swap PA12 and PA13 on SPI 2x3 header
swap A3 and A5
Comment out all frozen modules in CPX again to make room while waiting
for SPI flash.
2017-11-16 19:09:35 -05:00
Scott Shawcroft
ecc47d5258
Create supervisor module.
...
It can control autoreload and the rgb status led.
2017-11-16 09:04:17 -08:00
Kevin Townsend
237cc954e3
Fixed feather52 DFU support
2017-11-10 09:17:24 +01:00
Scott Shawcroft
ef9a7f262a
atmel-samd: Turn off nvmctl cache and rework active_read.
2017-11-08 16:01:38 -08:00
Scott Shawcroft
971bd7e9a6
atmel-samd: Improve MSC reliability.
...
* Be more liberal with critical sections to ensure ordering.
* Correct usb_busy so that it is busy when no errors occur on
transfer. I believe it worked before because it would be false
momentarily until a second transfer was attempted and a busy
error was returned, therefore setting usb_busy to true. That
risks the first "failed" transfer completing before a second one
is attempted.
2017-11-08 12:42:50 -08:00
Scott Shawcroft
7a901cfccd
atmel-samd: Align SCSI responses.
2017-11-08 10:47:22 -08:00
Scott Shawcroft
3cb5e7ea58
atmel-samd: Update Feather M0 Express USB PID
...
This makes it different from the bootloaders and Arduino.
2017-11-07 14:26:37 -08:00
Dan Halbert
9060df5af6
DigitalInOut: Use pin value % 32 to accomodate PORTB and up.
...
Fixes #407 .
2017-11-07 10:08:34 -08:00
Dan Halbert
7292984204
Implement busio.I2c.
...
* Added asf4_conf/samd*/hpl_sercom_config.h
* Adjusted clocks in peripheral_clk_config.h.
* Put some frozen libs back in CPX for testing.
* Implement common-hal I2C
* Add samd*_peripherals.h in parallel with samd*_pins.h for common
functions and data.
* Store SERCOM index in pins table for convenience.
* Canonicalize some #include guard names in various .h files.
simpler reset of SERCOMs; remove unused routine
2017-11-07 09:59:54 -08:00
Scott Shawcroft
182a946b0e
atmel-samd: Tweak mass storage code to finish read sooner.
2017-11-06 16:30:11 -08:00
Scott Shawcroft
a8ee0012d7
atmel-samd: Enable -Os for SAMD51 and update neopixel accordingly.
2017-11-06 16:30:11 -08:00
Jerry Needell
e2867eb4e9
enable framebuf for ESP8266
2017-11-06 14:54:54 -08:00
Scott Shawcroft
4140b3b944
atmel-samd: Stop double CSW after MSC reads
...
This explicit zero length xfer leads to a second CSW packet. If
another read was started between the two CSWs then the host gets
confused and resets the device.
On reads, the CSW is automatically sent when we reply with the
total length. Writes must do it manually so they can wait for the
disk to flush the data.
2017-11-03 15:08:55 -07:00