TG-Techie
6d4ffc69fd
add TG-Watch02A
2020-02-28 02:52:46 -05:00
Dan Halbert
aa1eed3bd3
initial Arduino Nano 33 BLE board definition
2019-09-26 15:28:57 -04:00
Scott Shawcroft
0f003ac5b8
Reorganize board busses into shared-bindings and shared-module.
2019-04-08 16:58:50 -07:00
Dan Halbert
9c24c804fb
Fix #ifdefs in port.c to call xxx_reset() rroutines properly. Remove most uses of EXPRESS_BOARD.
2019-02-18 22:44:31 -05:00
Dan Halbert
7b3f7605b8
address @tannewt changes: move and rename common files; remove PORT_HEAP_SIZE
2019-02-15 20:32:32 -05:00
Dan Halbert
a345ef28f2
finish Makefile refactoring; nrf builds work
2019-02-15 18:55:10 -05:00
Scott Shawcroft
760bd8d8a4
share fourwire and make nrf compile
2019-01-17 15:15:59 -08:00
Scott Shawcroft
6ef8639971
Rework safe mode and have heap overwrite trigger it.
...
This creates a common safe mode mechanic that ports can share.
As a result, the nRF52 now has safe mode support as well.
The common safe mode adds a 700ms delay at startup where a reset
during that window will cause a reset into safe mode. This window
is designated by a yellow status pixel and flashing the single led
three times.
A couple NeoPixel fixes are included for the nRF52 as well.
Fixes #1034 . Fixes #990 . Fixes #615 .
2018-12-06 14:24:20 -08:00
Scott Shawcroft
9d91111b1b
Move atmel-samd to tinyusb and support nRF flash.
...
This started while adding USB MIDI support (and descriptor support is
in this change.) When seeing that I'd have to implement the MIDI class
logic twice, once for atmel-samd and once for nrf, I decided to refactor
the USB stack so its shared across ports. This has led to a number of
changes that remove items from the ports folder and move them into
supervisor.
Furthermore, we had external SPI flash support for nrf pending so I
factored out the connection between the usb stack and the flash API as
well. This PR also includes the QSPI support for nRF.
2018-11-08 17:25:30 -08:00
hathach
c5593ec074
got uart tx work
2018-09-19 17:59:15 +07:00
hathach
1df3bcf392
add board.UART() function
2018-09-19 14:40:37 +07:00
hathach
d8c8c5f005
remove CFG_HWUART_FOR_SERIAL
2018-09-18 20:26:50 +07:00
Dan Halbert
e335c74ac6
use open-drain capabilities on GPIO; clean up board init; set correct GPIO voltage
2018-09-09 15:01:28 -04:00
Dan Halbert
4382389e6f
fix typos, remove incorrect pca10059 example; add default buses for pca10056; improve board names for pca boards
2018-09-01 00:29:36 -04:00
Dan Halbert
585597a252
pin files rework; implement pin claiming; add more boards
2018-08-31 18:05:55 -04:00
hathach
7961103ee6
update SD to v6.1.0
2018-08-22 21:51:30 +07:00
hathach
fc955b1591
remove bootloader binaries, update readme for using adafruit-nrufitl and flashing bootloader
2018-08-22 15:22:17 +07:00
hathach
df4184e478
rename linker file to SD major version only
2018-08-21 16:02:57 +07:00
hathach
e1ccc07841
remove bootloader & dfu-bootloader target
...
user should go to bootloader repo to upgrade bootloader
2018-08-14 20:19:28 +07:00
hathach
3525d65af3
should fix #1021
...
- update tinyusb for wanted char
- move usb code into usb.c
2018-07-17 21:24:49 +07:00
hathach
f98c7f708e
merge review
2018-07-12 01:37:23 +07:00
hathach
10846d316b
Merge branch 'master' into nrf52840_usbboot
2018-07-11 21:35:44 +07:00
hathach
a53b1c7cf1
code format
2018-07-10 22:49:51 +07:00
arturo182
2c63fb2a94
nrf: Remove the random hal and module
...
Thus getting rid of the whole old hal!
The module is not needed because the common-hal
nRF implementation uses HW RNG anyway.
2018-07-10 14:59:22 +02:00
hathach
0e819599e7
Merge branch 'master' into nrf52840_usbboot
2018-07-10 02:02:52 +07:00
hathach
7715d19efe
update bootloader hex
2018-07-10 01:20:37 +07:00
hathach
97a1ae911e
add family option for uf2
2018-07-10 01:18:14 +07:00
arturo182
25ece8fb3d
nrf: Rewrite the UART HAL using nrfx
2018-07-08 16:42:04 +02:00
arturo182
c6a2a55bc9
nrf: Cleanup mpconfigboard files
...
All the removed defines were used by legacy modules that are now
removed.
2018-07-08 15:18:11 +02:00
hathach
948ddf8463
make SD default to s140 and s132 for nrf52840 and nrf52832
...
add CFG_HWUART_FOR_SERIAL for using jlink as REPL
2018-07-06 14:39:49 +07:00
hathach
7fff7f5e70
add usb msc support for nrf52840
2018-07-04 16:40:53 +07:00
hathach
c4f11dfd32
flash target update bootloader setting to skip crc checksum
2018-06-27 15:22:44 +07:00
hathach
8fbe1d73e9
clean up makefile
2018-06-27 15:13:20 +07:00
hathach
ecd3993d43
update pin map for feather52840
2018-06-27 14:06:15 +07:00
arturo182
25e71a56d4
nrf: Update the PCA10056 example to use new pin naming
2018-06-20 23:39:36 +02:00
arturo182
c2d4d0a10b
nrf: Simplify pin generation and definition
...
This commit cleans up the pin generation code, all the pins and their
AF (only ADC, for now) are specified in nrf52_af.csv and board use their
own csv file to specify which pins are available on that board and if
they have any special names.
2018-06-20 23:26:32 +02:00
arturo182
ff918556cd
nrf: Simplify the board makefiles
...
With the only difference between a SD and non-SD build is the linker
file, there's no need to have two separate .mk per board files,
just use a conditional.
2018-06-20 21:21:45 +02:00
arturo182
b47a67d566
nrf: Remove machine, pyb and utime modules
...
Micropython legacy, keeping it consistent with atsam port.
2018-06-20 18:21:18 +02:00
arturo182
feee808955
nrf: Use the production version of s140 6.0.0
2018-06-18 23:12:28 +02:00
arturo182
9962ea6449
nrf: Change pin names on DKs to match silkscreen
...
Quite a big revamp of the make-pins script, it is now used on each
build to generate the pin files, so the static ones are not needed
anymore.
2018-02-12 22:41:19 +01:00
arturo182
29ae4cdd1c
nrf: Fix building pca10056 without SD
2018-02-07 22:41:26 +01:00
arturo182
1de2ee6884
nrf: Implement ticks, add gamepad module and example
2018-02-05 20:48:25 +01:00
arturo182
76f5c01798
nrf: Get the port working on pca10056 (nRF52840)
2018-02-05 20:38:41 +01:00
Glenn Ruben Bakke
44e2cb415f
ports/nrf: Moving nrf51/52 port to new ports directory
2017-10-04 21:46:48 +02:00
