1ccf767112
Merge branch 'adafruit:main' into motor
2022-04-26 10:23:14 +01:00
4eeaf41edc
test and adjust NeoPixel timings on multiple products
2022-04-25 23:12:24 -04:00
0642917cf7
Merge pull request #6270 from FoamyGuy/tilegrid_bitmap_property
...
adding bitmap property to TileGrid
2022-04-25 09:09:28 -04:00
fdf8207e05
Merge pull request #6281 from ViktorWiz/w5100s-evb-pico
...
Added WIZnet board W5100s-evb-pico
2022-04-25 09:09:08 -04:00
5b7e0754dd
Merge pull request #6287 from KurtE/mimxrt_pwm
...
Fix PWM Support for the MIMXRT boards
2022-04-25 09:02:40 -04:00
1a89a2d366
fix doc build
2022-04-23 13:25:59 -05:00
989fb828d4
Revamp background writing
...
Now a 'once' and a 'loop' buffer can be specified.
'once' is useful for things like writing a neopixel strip in the background,
if you can guarantee the buffer contents are stable until the write is complete.
'loop' is useful for periodic things, like pwm & servos.
both together are useful for some special cases of pwm/servo, where a
transitional waveform needs to be played for one repetition and then
a new waveform needs to be played after that.
The API is renamed to reflect that it's a more generic 'background'
operation.
2022-04-23 13:09:36 -05:00
8d9dc1fb93
Update ports/mimxrt10xx/supervisor/port.c
...
Co-authored-by: Dan Halbert <halbert@halwitz.org>
2022-04-22 11:47:40 -07:00
3c343cf1b8
Update ports/mimxrt10xx/supervisor/port.c
...
Co-authored-by: Dan Halbert <halbert@halwitz.org>
2022-04-22 11:47:30 -07:00
3885bc9018
Merge pull request #6303 from DavePutz/issue_4452
...
Fix for issue #4452 - time.sleep on STM
2022-04-22 13:34:31 -04:00
1312e5c759
Update ports/mimxrt10xx/supervisor/port.c
...
Co-authored-by: Dan Halbert <halbert@halwitz.org>
2022-04-22 09:16:27 -07:00
f102c15bb4
Update ports/mimxrt10xx/common-hal/pwmio/PWMOut.c
...
Co-authored-by: Dan Halbert <halbert@halwitz.org>
2022-04-22 09:15:40 -07:00
79dd2a6cd5
Update ports/mimxrt10xx/common-hal/pwmio/PWMOut.c
...
Fix Comment spelling
Co-authored-by: Dan Halbert <halbert@halwitz.org>
2022-04-22 09:15:29 -07:00
53b7caf13c
Update ports/mimxrt10xx/common-hal/pwmio/PWMOut.c
...
Co-authored-by: Dan Halbert <halbert@halwitz.org>
2022-04-22 09:15:01 -07:00
e8541e866c
fix end of file issue
2022-04-22 15:02:50 +09:00
28296f98f8
update pid
2022-04-22 14:59:28 +09:00
f91be019f6
Merge branch 'adafruit:main' into w5100s-evb-pico
2022-04-22 14:52:04 +09:00
289aaae954
Fix for issue #4452 - time.sleep on STM
2022-04-21 17:05:44 -05:00
76d54ca8ad
shrink sparkfun_redboard_turbo
2022-04-21 12:58:46 -04:00
457aba79f4
fix doc build
2022-04-20 08:09:38 -05:00
4aea8049c5
Merge pull request #6279 from mjs513/main
...
Added Settable Clock for MIMXRT BOARDS
2022-04-20 08:31:41 -04:00
1fcc73bc24
Merge pull request #6261 from KurtE/PortSerialHooksIssue
...
disable on mimxrt10xx (Teensy40 41) Serial port Hooks
2022-04-19 23:04:07 -04:00
144eb5dfd4
fix lost DMA IRQ
2022-04-19 16:42:27 -05:00
ebc426d9e6
Remove debug prints, improve docs
2022-04-19 16:39:04 -05:00
b128f180ca
switch to single single dma channel, fix some bugs
2022-04-19 16:33:51 -05:00
49769cfea4
Convert to use debug rx/tx pins to trigger adding this code
...
As per review request
2022-04-19 14:02:16 -07:00
33d6d55675
the basics work
...
the sequence has to be a minimum length, 8 entries, but this problem
is not detected. I don't THINK this is an insurmountable problem.
2022-04-19 15:14:50 -05:00
33f5598acc
Stub 'continuous write' functionality
2022-04-19 11:35:43 -05:00
17bba7b17d
remove Adafruit_CircuitPython_BusDevice from frozen modules, it's built in now
2022-04-19 06:49:11 +02:00
6425e937b5
Merge pull request #6289 from stonehippo/samd51_mm_flash
...
Samd51 mm flash
2022-04-18 18:59:58 -04:00
eab4867e61
Remove dead replaced code
...
As requested, I removed the dead code that was replaced
2022-04-18 15:46:36 -07:00
3b5171c4ff
Move hook implementation to supervisor
2022-04-18 14:09:36 +00:00
4ab3881a82
Merge pull request #6282 from xuhow/elecfreaks_picoed
...
Elecfreaks picoed
2022-04-18 10:07:17 -04:00
32fc084b39
Removed compiler flag in favor of MP_WEAK implementation
2022-04-18 13:10:12 +00:00
0ba93b20e5
Setup flash pins on Sparkfun SAMD51 Micromod
2022-04-18 13:10:12 +00:00
208bfb33aa
Deleted Warnings Chanaged ValueError Method
2022-04-17 15:04:16 -04:00
02a0939d2e
Fix PWM Support for the MIMXRT boards
...
There were two main issues with the PWM support.
The first is they would fail to work properly if the board goes
into low power mode, when you do things like: time.sleep(0.25)
Can make partially work with this by turning on the proper flags
in each of the FlexPWMTimer Timers/sub-timers, but this did not
appear to work if for example you have both A and B channels
enabled.
Second main problem is that the code did not work with the X
channel of each timer/sub-timer. It looks like someone had
earlier started support for this, But was not sufficient.
Needed to bypass the SDK code and get it closer to the PJRC code.
That is we set the PWM_CTRL_FULL_MASK, which then uses base->SM[submodule].VAL1 to control
when the timer is reset, so it sets up your cycle/frequency. But then this implies that X channel
which uses 0, 1 has to be handled specially. So for the different channels:
A - Uses VAL2 to turn on (0) and VAL3=duty to turn off
B - Uses VAL4 to turn on (0) and VAL5 to turn off
X - As mentioned above VAL1 turns off, but its set to the timing for freqency. so
VAL0 turns on, so we set it to VAL1 - duty
2022-04-16 09:00:45 -07:00
0b6c451fdf
Add Overclocking Warnings to Processor.c
2022-04-16 11:01:50 -04:00
fd41c1ac5b
Update based on PR Comments
2022-04-14 06:45:16 -04:00
9c1b44a030
Modify USB VID and PID of the Pico:ed
2022-04-14 17:42:04 +08:00
b30d2e0889
update w5100s-evb-pico mpconfigboard.h
2022-04-14 14:35:23 +09:00
716497c132
corrected pre-commit errors
2022-04-13 12:04:28 -04:00
60e330fb0d
Added Settable Clock for MIMXRT BOARDS
2022-04-13 09:47:55 -04:00
8cce2e6406
Updated motor pin names
2022-04-12 15:20:28 +01:00
71a7ec6f76
Add ELECFREAKS Pico:ed board.
2022-04-12 16:10:02 +08:00
7be66a5733
Merge pull request #6265 from KurtE/teensyMM
...
Add Teensy MicroMod board
2022-04-11 12:31:42 -04:00
f95a68a37c
Rename the board name
...
Renamed the board both name of directory within boards, but also the
name reported board name: board_id -- sparkfun_teensy_micromod
Adafruit CircuitPython 7.3.0-beta.0-10-g2a3eb49da-dirty on 2022-04-10; SparkFun Teensy MicroMod Processor with IMXRT1062DVL6A
2022-04-10 16:56:51 -07:00
01cff3c4f8
add MIDI to frozen libs
2022-04-10 14:10:07 -04:00
df74c681d2
Merge pull request #6273 from KurtE/t4x_board_dir_add_txrx_names
...
Add to board object other Serial and I2c pin names
2022-04-10 12:08:41 -04:00
948040f1f0
disable onewire instead of displayio on boards without room
2022-04-10 10:00:37 -05:00
ecf2f1c80c
Add to board object other Serial and I2c pin names
...
While testing out this and the new MicroMod Teensy port, @mjs513
and myself found it desirable to have logical pin names for the
different Serial UART objects. It is a lot easier and clearer
to use and maintain to do something
like: uart4 = busio.UART(board.TX4, board.RX4)
than have to go look up the pin numbers for each board.
2022-04-10 05:39:43 -07:00
c3cfbc1259
Force pin 21 high; patch; need to diagnose further
2022-04-09 22:03:16 -04:00
7ad5fa511e
disable displayio for some boards
2022-04-09 16:24:06 -05:00
7ff0036a26
Fix the pre-check stuff
2022-04-08 15:59:27 -07:00
2a3eb49da7
Update the pins.c
...
I fixed a couple issues in the pin name definitions.
The pin names are sort of Teensy centric in that the priority is given
to the pin names you would use in Arduino like D0, D1, ...
But also added names for the MicroMod names in particular the names
on the front of the ATP carrier board
Also updated manufacturer to be both PJRC and Sparkfun
2022-04-08 07:41:51 -07:00
93e9e3ad90
Fix end of line
2022-04-07 15:52:01 -07:00
03e0acde94
Trying to cleanup the pre build messages
2022-04-07 14:11:22 -07:00
2cb422fb19
Create W25Q128JV.ld
...
Add flash file needed for Teensy MicroMod,
2022-04-07 12:09:56 -07:00
766bf8f671
disable floppyio on kicksat-sprite
2022-04-07 10:57:37 -05:00
f7be4345d9
Merge remote-tracking branch 'origin/main' into floppy
2022-04-07 08:37:46 -05:00
769b182da4
Added definition for upcoming Pimoroni motor board
2022-04-07 07:24:55 +01:00
d5deddcaf5
Merge pull request #6207 from domdfcoding/esp32-rotaryio
...
Add espressif rotaryio divisor support.
2022-04-06 21:35:02 -04:00
a74ec22aa4
Start setting up a Teensy MicroMod port
...
I have done a first pass through the files
this also includes a new VID/PID from sparkfun
2022-04-06 17:58:22 -07:00
219ef5e407
disable on mimxrt10xx (Teensy40 41) Serial port Hooks
...
As mentioned in issue #6241 the commit to setup port hooks is now
causing all input/output that are to go to the Mu window to also
go to the LpUart that is defined the port serial.c
and in this case it goes to lpuart4, which on Teensy 4, 4.1 is
used on Arduino Serial2. With this new code this port no longer
works properly.
This is one way to solve it, in that there is a #if defined() that
if not set, all of the code in this file is ignored and the higher
level supervisor stub versions of these functions will be used, which
don't interfere with Serial2 and my test sketch works again.
Note: the PR for Switch to Port Serial Hooks, also changed code in
other ports. I have not tried to see how.
There are other more global fixes for this, in which maybe a higer
level #if that disables the code within the top level supervisor. Or
could be software controlled
Again this may not be the final solution, but at least it gets
Serial2 up and running agin.
2022-04-06 15:58:27 -07:00
dbb6f5f16c
Merge pull request #6246 from DavePutz/issue_6148
...
Don't reset GPIO4 on the MagTag (used for voltage monitoring)
2022-04-06 13:22:01 -04:00
f297e872d6
Account for divisor when overriding position.
2022-04-06 18:13:59 +01:00
2693a4cfe1
Merge pull request #6069 from gamblor21/uzlib-module
...
zlib Module
2022-04-06 12:06:44 -04:00
1a329cfd11
Merge pull request #6029 from jepler/pio-wrap
...
raspberry: StateMachine: Add support for wrap=, wrap_target=
2022-04-06 11:55:02 -04:00
99dc4029dc
Espressif: disable pull-up on AnalogIn creation
2022-04-06 11:33:56 -04:00
286e26edf0
Added support for 4MB flash.
2022-04-06 11:08:22 +02:00
76efdfd9a6
initial commit for w5100s-evb-pico
2022-04-06 14:52:28 +09:00
b993313ac1
Don't reset GPIO4 (used for voltage monitoring)
2022-04-05 11:30:12 -05:00
fe98248a3d
Merge remote-tracking branch 'origin/7.2.x' into merge-7.2.x
2022-04-05 08:45:13 -05:00
8cd09b1f0d
Merge pull request #6240 from dhalbert/7.2.x-rp2040-clear-uart-rtic-interrupt
...
handle clearing both RXIC and RTIC interrupts
2022-04-05 08:43:22 -05:00
47d3d0d7f8
Merge pull request #6202 from jepler/issue5985
...
samd: Don't rely on RTC interrupt
2022-04-05 09:16:40 -04:00
4cccc1a036
handle clearing both RXIC and RTIC interrupts
2022-04-04 23:55:08 -04:00
fa4b4fa639
nrf: Correctly mark PWM unused during reset
2022-04-04 10:08:54 -05:00
8ed7b114cd
Merge branch 'main' into uzlib-module
2022-04-03 11:48:37 -05:00
9d67e62f4d
Removed from small board
2022-04-03 11:47:19 -05:00
7b586e077c
Removed from small boards
2022-04-02 12:22:14 -05:00
390a473dda
add board.DISPLAY since display already set up by CirPy
2022-04-01 15:08:43 -07:00
319ca8560c
Always configure the second PCNT channel.
2022-03-31 20:00:34 +01:00
d9418fb7a3
Merge pull request #6184 from PontusO/main
...
Added Challenger 840 board.
2022-03-30 21:18:43 -04:00
ec5c9507b9
Merge pull request #6187 from prplz/espressif-uart-workflow-fixes
...
Espressif: Fix interrupts in UART workflow
2022-03-30 21:18:02 -04:00
6fd968fc12
Merge pull request #6199 from erongd/muselab-wrover-spiram-fix
...
enable SPIRAM support on muselab nanoESP32S2 board
2022-03-30 21:14:59 -04:00
f059f7180c
Merge pull request #6208 from ZodiusInfuser/badger
...
Improvement to Badger 2040 operation on battery
2022-03-30 13:35:47 -04:00
336abdfbc7
Switch variable to extern
2022-03-30 17:44:36 +01:00
f2d10237d2
Merge branch 'adafruit:main' into main
2022-03-30 16:43:39 +02:00
dd933c7d06
add NeoPixel lib to firmware
2022-03-30 09:17:26 -04:00
b032d42a71
Update ports/espressif/boards/adafruit_feather_esp32s2/pins.c
2022-03-29 12:46:58 -04:00
2563c509f7
fix automatic i2c enablement with rev C
2022-03-29 12:46:51 -04:00
f07cfdd80c
Linting fixes
2022-03-28 18:34:39 +01:00
c6bfe54dc8
Merge pull request #6209 from ZodiusInfuser/servo
...
Pin rename on Servo2040 to match schematic and C++/MP board defs
2022-03-28 13:29:27 -04:00
c2fb44b36c
Set enable pin to high during boot
2022-03-28 15:56:02 +01:00
b44a2a0c8e
Updated pin name to match schematic
2022-03-28 14:07:08 +01:00
6d025a239e
Add espressif rotaryio divisor support.
2022-03-28 09:04:02 +01:00
0d3f45bef8
Remove move DecompIO files
2022-03-27 16:18:56 -05:00
f96cd7361d
Fix esp32s2 build
2022-03-27 10:09:23 +11:00
dd73182441
Merge pull request #6190 from tannewt/esp32s3_usb_devkit
...
Add ESP32-S3-USB-OTG board
2022-03-26 15:05:30 -05:00
35aa32bec0
Merge pull request #6193 from tannewt/fix_empty_mdns
...
Fix MDNS crash on S2
2022-03-26 15:05:17 -05:00
372306411a
samd: Don't rely on RTC interrupt
...
I instrumented RTC_Handler and determined that on SAMD51 it was possible
for the interrupt to be delivered well before the actual overflow of the
RTC COUNT register (e.g., a value as small as 0xffff_fffd could be seen
at the time of overflow)
Rather than depending on the overflow interrupt coming in at the same time
as COUNT overflows (exactly), rely only on observed values of COUNT in
_get_count, overflowing when it wraps around from a high value to a low
one.
With this change, PLUS a second change so that it is possible to warp
the RTC counter close to an overflow and test in 20ms instead of 3 days,
there was no problem detected over 20000+ overflows. Before, a substantial
fraction (much greater than 10%) of overflows failed.
Fixes #5985
Change to common-hal/rtc/RTC.c for time warping (plus make rtc_old_count non-static):
```patch
void common_hal_rtc_set_calibration(int calibration) {
+
+ common_hal_mcu_disable_interrupts();
+
+ RTC->MODE0.COUNT.reg = 0xffffff00;
+ rtc_old_count = 0;
+ do {
+ while ((RTC->MODE0.SYNCBUSY.reg & (RTC_MODE0_SYNCBUSY_COUNTSYNC | RTC_MODE0_SYNCBUSY_COUNT)) != 0) { }
+ }
+ while(RTC->MODE0.COUNT.reg < 0xffffff00);
+ common_hal_mcu_enable_interrupts();
+
+ mp_printf(&mp_plat_print, "Warping RTC in calibration setter count=%08x rtc_old_count=%08x\n", RTC->MODE0.COUNT.reg, rtc_old_count);
```
Test program:
```python
import time
from rtc import RTC
i = 0
while True:
RTC().calibration = 1 # Warps to ~16ms before overflow, with patch to RTC code
t0 = time.monotonic_ns()
et = t0 + 20_000_000 # 20ms
while (t1 := time.monotonic_ns()) < et: pass
i += 1
print(f"{i:6d}: duration {t1-t0}")
if t1-t0 > 200_000_000: break
print()
```
2022-03-25 14:48:03 -05:00
686012426d
Espressif: Fix interrupts in UART workflow
2022-03-25 16:20:04 +11:00
7ad6fa8df5
enable SPIRAM support on muselab nanoESP32S2 board
2022-03-24 16:46:13 -07:00
fcde108d03
Merge pull request #6194 from jepler/revamp-duplicate-usb-check
...
Improve the USB vid:pid duplicate checker
2022-03-24 14:57:48 -07:00
ac7977ba75
Merge pull request #6191 from tannewt/esp_3_wire_spi
...
Fix 3-wire SPI on ESP
2022-03-24 14:51:16 -07:00
9d4c74a87e
Merge pull request #6197 from ZodiusInfuser/servo
...
Added board definition for upcoming Pimoroni servo driver.
2022-03-24 14:44:44 -07:00
bcec1e44f0
add status LED to nrf pca10059 dongdle
2022-03-24 15:05:02 -04:00
8e98be2704
Added additional constants
2022-03-24 18:32:39 +00:00
9c81ea86e9
Added board definition for upcoming Pimoroni servo driver.
2022-03-24 16:07:04 +00:00
d91ca7369c
Merge remote-tracking branch 'origin/main' into revamp-duplicate-usb-check
2022-03-24 09:44:41 -05:00
a07ac72cc5
Improve the USB vid:pid duplicate checker
...
To me, it made more sense to track which boards go together in a cluster;
when reviewing a request to actually use a duplicate vid/pid, you want
to know what board(s) it is aliasing.
I also revamped the detection of non-USB boards so that a board .mk file
that couldn't be parsed by the code here would raise a problem instead
of just being skipped for the purposes of checking.
There were some lines with comments on the end, and some variation in
capitalization of the IDs. These are all normalized and a (sometimes
unfriendly!) error printed when it's incorrect.
Before this, here were some ways to trick the duplicate vid/pid checker:
```
USB_PID = 0XABCD
USB_PID = 0xAbCd
USB_PID = 0xABCD # harmless comment?
```
None of these things were ever done on purpose.
2022-03-24 09:42:11 -05:00
8642dc4aa7
Fix MDNS crash on S2
...
Fixes #6186
2022-03-23 17:17:48 -07:00
380a7087d4
Fix 3-wire SPI on ESP
...
Simplifying the checks fixed it.
Fixes #6141
2022-03-23 14:53:46 -07:00
e13d32b832
Add ESP32-S3-USB-OTG board
...
This board has both types of USB connectors, a display and buttons
to select items on the display. It also has a micro-B connector for
the UART output.
2022-03-23 14:10:26 -07:00
ee4c501936
Merge remote-tracking branch 'adafruit/main' into c3_serial_jtag
2022-03-23 12:17:02 -07:00
c7b28eb2ef
Update ports/nrf/boards/challenger_840/pins.c
...
Co-authored-by: Dan Halbert <halbert@halwitz.org>
2022-03-23 17:14:49 +01:00
d26297ae98
Update ports/nrf/boards/challenger_840/pins.c
...
Co-authored-by: Dan Halbert <halbert@halwitz.org>
2022-03-23 17:14:40 +01:00
7901850bb8
Update ports/nrf/boards/challenger_840/pins.c
...
Co-authored-by: Dan Halbert <halbert@halwitz.org>
2022-03-23 17:14:28 +01:00
2fa182147b
Fix STM non-F4 builds
2022-03-22 23:07:38 -07:00
f5d90fc84f
Switch to port_serial_* hooks
...
This makes it easier to integrate port specific serial alongside
the common approaches.
2022-03-22 19:40:33 -07:00
5e09ed611e
Added Challenger 840 board.
2022-03-22 21:36:54 +01:00
367e0ea901
Enable rgb status LED on MakerDiary USB Dongle
2022-03-22 20:53:12 +01:00
110857c12e
Actually turn on serial over Serial/JTAG for QTPy
2022-03-22 11:45:47 -07:00
b8d1bb1d5d
Shrink C3 builds
2022-03-22 10:46:57 -07:00
4363361c87
Board definition clean up
...
Removes:
* AUTORESET_DELAY_MS which never did anything but was introduced
somehow.
* CIRCUITPY_BOOT_BUTTON in all but one ESP board because they all have
them. There is a default based on the strapping pins.
* BOARD_USER_SAFE_MODE_ACTION because it was all the same for boards
with boot buttons. Now the safe mode code manages the message.
2022-03-21 17:58:43 -07:00
623b6fad16
Fix nested categories in update_sdkconfig.py
...
Also, mark QTPy C3 as BIN only.
2022-03-21 17:04:19 -07:00
6dd9db31b3
Add USB to Serial/JTAG support for REPL
...
Adds Adafruit QT Py C3 board that uses it. Also revamps size
check script to work for S3 and C3 as well.
Fixes #6030
2022-03-21 14:03:57 -07:00
4465adfe01
Merge pull request #6175 from tannewt/mdns
...
Add mdns module
2022-03-21 15:55:03 -05:00
92d946fcac
Guard against NULL result
2022-03-21 10:15:46 -07:00
fdf27eee12
add feather esp32-s3 8mb flash, 0 psram
2022-03-19 23:04:20 -04:00
6f0d62d85e
Formatting and shrink build size on C3
2022-03-18 12:05:54 -07:00
8319faa032
Merge pull request #6155 from prplz/lilygo_ttgo_t-01c3
...
Add board lilygo_ttgo_t-01c3
2022-03-17 18:41:05 -07:00
e9d81c2826
Add mdns module
...
This allows for CircuitPython to resolve a .local domain and find
other devices with MDNS services.
First step for #6174
2022-03-17 18:16:16 -07:00
bad6cdcfa5
Merge pull request #6160 from tannewt/merge_7.2.2
...
Merge 7.2.2 changes into main
2022-03-17 20:02:30 -04:00
51701e6abe
Merge remote-tracking branch 'adafruit/7.2.x' into merge_7.2.2
2022-03-17 14:15:55 -07:00
78cb61c7a3
Turn off traceback on bluemicro833
2022-03-17 11:38:27 -07:00
da92d508c2
lilygo_ttgo_t-01c3: Add creation ID
2022-03-17 19:21:34 +11:00
de168b106c
Add board lilygo_ttgo_t-01c3
2022-03-17 17:24:24 +11:00
c098474854
Disable aesio and traceback on matrixportal to save space
2022-03-16 10:41:17 -07:00
af9f80daeb
Merge pull request #6144 from tannewt/back_to_idf4.4
...
Update ESP-IDF to fix PinAlarm
2022-03-15 17:10:42 -04:00
dcc3ec171e
Merge remote-tracking branch 'adafruit/7.2.x' into merge_7.2.2
2022-03-15 13:56:11 -07:00
4ffbf0830b
Merge pull request #6157 from arms22/ssci_isp1807_micro_board
...
Add board ssci_isp1807_micro_board
2022-03-15 13:42:34 -07:00
1a73b44679
Merge pull request #6156 from arms22/ssci_isp1807_dev_board
...
Add board ssci_isp1807_dev_board
2022-03-15 13:41:54 -07:00
fd17ba6d91
Merge pull request #6143 from ZodiusInfuser/badger
...
Added built-in display bringup for Badger2040
2022-03-15 13:28:00 -07:00
2b4917bbf5
change USB_PID
2022-03-15 14:54:29 +09:00
7482148a78
Add board ssci_isp1807_micro_board
2022-03-15 14:39:32 +09:00
b671ba81b9
Add board ssci_isp1807_dev_board
2022-03-15 14:29:24 +09:00
ff0b3a9f50
Merge pull request #6153 from tannewt/refine_autoreload
...
Further refine autoreload
2022-03-14 22:22:08 -04:00
c919e9c2cc
fix duplicate reference names for DSN export
2022-03-14 21:02:14 -04:00
f602296e59
Re-enable BLE on MatrixPortal. Remove PortalBase
...
We have a guide that uses it. It was removed in #6043 without
realizing that.
Fixes #6152
2022-03-14 17:04:46 -07:00
32ac396a41
Further refine autoreload
...
This unifies the delay into the post-run delay that also waits
for user input and fake sleep. This ensures we always delay.
Previous code would only delay if the code.py was running when
autoreload was triggered. Now it will always delay.
We also now suspend autoreload when a USB write starts and then
resume on completion. This should prevent reloading in between
sectors of a single write.
2022-03-14 16:49:30 -07:00
af2862ead9
Removed trailing whitespace
2022-03-14 22:28:28 +00:00
a778469082
Inverted the display pixels to match the expected CPY behaviour
2022-03-14 11:12:03 +00:00
f13d218749
Merge pull request #6125 from tannewt/usb_host
...
Start of USB host API
2022-03-11 21:41:28 -05:00
7cb66dd316
Merge pull request #6142 from dhalbert/7.2.x-autoreload-fake-sleep
...
7.2.x autoreload rework (again)
2022-03-11 16:46:04 -08:00
a719fabbb6
Shrink bluemicro833 build
2022-03-11 16:04:12 -08:00
96dd11a198
Update ESP-IDF to fix PinAlarm
...
Fixes #5973
2022-03-11 14:40:49 -08:00
eab5f00548
Added built-in display bringup for Badger2040
2022-03-11 20:10:42 +00:00
e4cd9690f1
rework auto-reload delay logic
2022-03-11 14:03:04 -05:00
862210b3fb
Merge pull request #6135 from CircuitART/main
...
merge hexky_s2 board
2022-03-11 07:48:54 -05:00
43bd2c41e0
Update pins.c
2022-03-11 13:27:08 +08:00
597430ef96
Update pins.c
2022-03-11 12:26:49 +08:00
016bc00f01
Update pins.c
...
fixed
2022-03-11 11:54:32 +08:00
dbc8a312a2
Merge pull request #6137 from dhalbert/7.2.x-__future__
...
Backport from __future__ import annotations from #6117
2022-03-10 20:46:05 -05:00
c9ec5c89b6
Fix ESP32-S3 box display color order
2022-03-10 15:50:07 -08:00
19e7647f3d
turn off MIDI on sensebox_mcu for sapce
2022-03-10 18:20:04 -05:00
a7260a8b61
squeeze arduino_zero further
2022-03-10 15:56:51 -05:00
c5947fd6de
squeeze arduino_zero and sensebox_mcu
2022-03-10 12:46:08 -05:00
2f83264f09
update nina-fw submodule
2022-03-10 12:24:43 -05:00
6ddab0f3c8
shrink matrixportal_m4
2022-03-10 11:20:44 -05:00
4bfe9e53df
merge hexky_s2 board
...
Hello, please add support to my custom esp32-s2 board.
thanks
2022-03-10 13:27:14 +08:00
0957c1546f
Merge pull request #6132 from dhalbert/fix-autoreload
...
Make autoreload checking more robust
2022-03-09 14:02:15 -08:00
6465d81918
Update ports/stm/boards/stm32f411ce_blackpill_with_flash/mpconfigboard.h
...
whoopsies
Co-authored-by: Scott Shawcroft <scott@tannewt.org>
2022-03-09 13:33:54 -05:00
3089c9b7fd
Merge pull request #6128 from tannewt/gcc11_stringop
...
Fix SAMD51 builds on GCC11.2
2022-03-09 13:32:56 -05:00
9b2e22a6df
Make autoreload checking more robust
...
- Add reset for autoreload. De-request ticks.
- Separate state a little more in autoreload.c
- Rename some routines.
- Remove redundant settings of CIRCUITPY_AUTORELOAD_DELAY_MS.
2022-03-09 11:07:55 -05:00
45f9522a63
Fix EVK status led to be inverted
2022-03-08 18:15:43 -08:00
442026548f
Merge pull request #6084 from fabaff/lilygo-ttgo-esp32-s2
...
Add support for LILYGO TTGO T8 ESP32-S2-WROOM
2022-03-08 21:00:44 -05:00
96f5eec2ee
Add Teensy 4.1 power pin and fix SWD for DEBUG=1
2022-03-08 17:17:07 -08:00
d933f8ac50
Espressif: Fix i2c pullup detection
2022-03-09 07:36:17 +11:00
0a72420dcb
Add support for LILYGO TTGO T8 ESP32-S2-WROOM
2022-03-08 20:07:37 +01:00
1b1b363515
Add support for LILYGO TTGO T8 ESP32-S2
2022-03-08 19:56:41 +01:00
4ac6ef0086
Fix SAMD51 builds on GCC11.2
...
Fixes #5351
2022-03-08 10:41:34 -08:00
1c8f671f0a
Merge pull request #6118 from pewpew-game/parallel-reset-optional
...
paralleldisplay: reset and read pins should be optional
2022-03-08 09:34:25 -05:00
05a4d24a0f
Merge pull request #6117 from dhalbert/__future__
...
implement `from __future__ import annotations`
2022-03-08 09:33:36 -05:00
ab0a7a8515
Merge pull request #6126 from prplz/fix-espressif-pullup-detection
...
Espressif: Fix i2c pullup detection
2022-03-08 09:28:06 -05:00
bc1dade304
Espressif: Fix i2c pullup detection
2022-03-08 16:39:24 +11:00
eff6057fa3
shrink matrixportal_m4
2022-03-07 21:37:28 -05:00
83593a1558
Start of USB host API
...
This allows you to list and explore connected USB devices. It
only stubs out the methods to communicate to endpoints. That will
come in a follow up once TinyUSB has it. (It's in progress.)
Related to #5986
2022-03-07 18:07:25 -08:00
78d7bce02a
seeeduino_xiao_kb: Copy pins from seeeduino_xiao
2022-03-08 08:58:32 +11:00
236ebba0ca
melopero_shake_rp2040: Add missing BOARD_DICT_STANDARD_ITEMS
2022-03-08 08:58:32 +11:00
b439464627
Merge pull request #6107 from prplz/add-missing-board-items
...
Add missing BOARD_DICT_STANDARD_ITEMS to two boards
2022-03-07 15:36:17 -06:00
ff865b60da
Merge pull request #5298 from pewpew-game/logo-remove
...
Add a flag for removing the Blinka logo from the REPL
2022-03-07 12:53:56 -08:00
96aec37ead
fix whitespace
2022-03-07 09:11:29 -05:00
e91c2e13fb
Seediuno XIAO SAMD21: inverted pins
2022-03-07 09:03:32 -05:00
be3129a917
Update ports/atmel-samd/boards/seeeduino_xiao/pins.c
...
Co-authored-by: Dan Halbert <halbert@halwitz.org>
2022-03-06 22:59:54 -06:00
6fd0643b1e
Remove trailing white space
2022-03-06 21:15:37 -06:00
d7ef8f18df
pins.c: added comment of reverse wiring for XIAO LEDs
2022-03-06 20:07:42 -06:00
36a27806d8
pins.c: Modify and correct LED pin mappings and names for Xiao
...
Added YELLOW_LED=LED=D13,
BLUE1_LED=RX_LED,
BLUE2_LED=TX_LED
2022-03-06 19:20:37 -06:00
b69a06b2ed
Also fix the read pin in the atmel and rp2040 ports
2022-03-06 11:33:07 +01:00
b5ad78715c
Update ports/espressif/common-hal/paralleldisplay/ParallelBus.h
...
Co-authored-by: Dan Halbert <halbert@halwitz.org>
2022-03-05 21:48:00 +01:00
ZodiusInfuser
Dan Halbert
Dan Halbert
Jeff Epler
KurtE
ViktorWiz
root
Neradoc
George White
mjs513
Xu Hao
root
BigTuna94
Limor "Ladyada" Fried
foamyguy
Dominic Davis-Foster
Pontus Oldberg
ViktorWiz
Mark
gamblor21
Tod Kurt
Michael Himing
Eric Rong
Scott Shawcroft
jerryneedell
Neradoc
arms22
CircuitART
Fabian Affolter
Rick Sorensen
Rick Sorensen
Radomir Dopieralski
Radomir Dopieralski