Jeff Epler
6c3cdceb45
Implement scan, connect, ping
...
My pings go out, and then they come back
```py
import os
import wifi
import ipaddress
wifi.radio.connect(os.getenv('WIFI_SSID'), os.getenv('WIFI_PASSWORD'))
ipv4 = ipaddress.ip_address("8.8.4.4")
print("Ping google.com: %f ms" % (wifi.radio.ping(ipv4)*1000))
```
2022-09-28 10:06:33 -05:00
Jeff Epler
346fff2e7c
cyw43 basic gpio support, hwaddr in boot_out
2022-09-28 10:06:33 -05:00
Jeff Epler
22b04aef22
Reindent a block
2022-09-28 10:05:53 -05:00
Jeff Epler
9caa65cf28
allow a board to override link.ld
2022-09-28 10:05:53 -05:00
Jeff Epler
77fcb8a5a3
disable rainbowio on this arduino_nano_33_iot
...
The gpio changes took away enough code space that it doesn't fit.
2022-09-28 10:05:32 -05:00
Florin Maticu
745d83adac
DFU mode implementation for STM32F4 MCU.
2022-09-18 18:24:38 +02:00
Jeff Epler
1091d51af2
Merge pull request #6918 from UnexpectedCircuitPython/main
...
Added support for Unexpected Maker TinyPICO (V2/V3) and TinyPICO Nano
2022-09-17 21:39:17 -04:00
Seon Rozenblum
268b3f0dde
Added support for Unexpected Maker TinyPICO (V2/V3) and TinyPICO Nano boards using ESP32-PICO-D4
2022-09-18 09:49:30 +10:00
Paul Price
b2ffda219a
updated a pin definition
2022-09-17 16:53:24 -04:00
Dan Halbert
8a568d18b5
Merge pull request #6757 from latkinso42/adcdma
...
analogbufio
2022-09-16 08:32:24 -04:00
MicroDev
4a69dfa50c
Merge pull request #6907 from dhalbert/preserve-pins-on-deep-sleep
...
allow preserving pin state during deep sleep
2022-09-16 17:52:04 +05:30
MicroDev
f994b11d52
Merge pull request #6909 from dhalbert/fesp32s2tft-remove-unneeded-code
...
Remove unneeded workaround for Feather ESP32-S2 TFT
2022-09-16 10:18:13 +05:30
Dan Halbert
7914870f9a
Merge pull request #6908 from dhalbert/nrf-busio-none-empty-uart-read
...
nrf: return None when UART.read() reads nothing
2022-09-15 22:12:06 -04:00
Dan Halbert
6bb47038d5
Merge remote-tracking branch 'adafruit/main' into adcdma
2022-09-15 20:42:51 -04:00
Dan Halbert
0ab4f12dc4
fix some submodules commit skew
2022-09-15 20:36:29 -04:00
Dan Halbert
82694b7265
remove extraneous copyrights
2022-09-15 20:31:08 -04:00
Dan Halbert
4df8a51982
Remove unneeded workaround for Feather ESP32-S2 TFT
2022-09-15 20:06:47 -04:00
Dan Halbert
3abfd212ec
nrf: return None when UART.read() reads nothing
2022-09-15 19:40:02 -04:00
Dan Halbert
60f43b1703
allow preserving pin state during deep sleep
2022-09-15 17:35:14 -04:00
Wind-stormger
56c5f1eedf
Add BananaPi BPI-Leaf-S3.
...
Based on esp32s3, all available pins are drawn.
2M PSRAM, 8M FLASH.
A JST SH 4-pin Connector can be used for STEMMA QT / Qwiic.
A MX 1.25mm 2-Pin Connector Lithium battery power supply.
A WS2812 LED.
2022-09-15 14:18:24 +08:00
Dan Halbert
14fc4a0797
Merge pull request #6898 from dhalbert/espressif-pwmout-reset
...
Espressif pwmout reset fixes
2022-09-14 18:47:05 -04:00
Dan Halbert
ae64f9fd78
Merge pull request #6899 from BPI-STEAM/CircuitPython-main-BPI-BIT-S2-PR
...
Add BananaPi BPI-Bit-S2 .
2022-09-13 23:02:46 -04:00
Wind-stormger
6f4cc611ed
Add BananaPi BPI-Bit-S2 .
...
Adds support for the BananaPi BPI-Bit-S2 Boards.
Based on esp32s2 chip.
With 25 ws2812 LEDs, 1 buzzer, 2 photosensitive sensors, 1 thermosensitive sensor,
2 buttons on the front, 1 reset button and 1 boot button on the back.
2022-09-14 10:21:23 +08:00
Dan Halbert
d2f28eb980
Merge pull request #6887 from RetiredWizard/Broadcom-UART
...
Enable CIRCUITPY_CONSOLE_UART by default on Broadcom boards
2022-09-13 14:35:16 -04:00
Dan Halbert
2b25a5d574
update esp32-camera
2022-09-13 13:16:37 -04:00
Dan Halbert
14adfb16dd
avoid pwmout_reset() workaround by reordering in main(); remove unnecessary never-resets
2022-09-12 21:32:21 -04:00
Dan Halbert
d0d10179c2
fix logic in pwmout_reset()
2022-09-12 17:03:45 -04:00
Kong Wai Weng
c157f1cb39
Cast pin_number to int8_t so that it can be used with switch-case.
2022-09-12 18:56:15 +08:00
Kong Wai Weng
0ae015e4d9
Removed whitespaces.
2022-09-12 18:25:27 +08:00
Kong Wai Weng
aaa2be1200
Set the default pin state for GPIOs to pull down.
2022-09-12 18:19:33 +08:00
microDev
36221bd749
update board microdev_micro_c3
2022-09-11 13:31:38 +05:30
RetiredWizard
14b604f48c
Add LED pin definition to Zero 2W board
2022-09-10 23:18:25 -04:00
RetiredWizard
28756936d5
Add HW_LED_STATUS pin to Zero 2W board
2022-09-10 23:17:02 -04:00
RetiredWizard
38a0ca324e
Uses different pins for RX/TX
2022-09-10 21:48:10 -04:00
RetiredWizard
f4eb618598
Define CIRCUITPY_CONSOLE_UART_TX/RX
2022-09-10 21:42:41 -04:00
RetiredWizard
1bdf9fca40
Define CIRCUITPY_CONSOLE_UART_TX/RX
2022-09-10 21:40:31 -04:00
RetiredWizard
1d03d73c13
Define CIRCUITPY_CONSOLE_UART_TX/RX
2022-09-10 21:39:51 -04:00
RetiredWizard
29e0aba72f
Define CIRCUITPY_CONSOLE_UART_TX/RX
2022-09-10 21:39:03 -04:00
RetiredWizard
fb4062d23f
Define CIRCUITPY_CONSOLE_UART_TX/RX
2022-09-10 21:38:16 -04:00
RetiredWizard
72c479efe6
Define CIRCUITPY_CONSOLE_UART_TX/RX
2022-09-10 21:37:31 -04:00
RetiredWizard
a892af8d77
Define CIRCUITPY_CONSOLE_UART_TX/RX
2022-09-10 21:36:41 -04:00
RetiredWizard
7708f19ec8
Define CIRCUITPY_CONSOLE_UART_TX/RX
2022-09-10 21:36:01 -04:00
RetiredWizard
0913e3a148
Define CIRCUITPY_CONSOLE_UART_TX/RX
2022-09-10 21:34:45 -04:00
RetiredWizard
ecb74aa652
Remove CIRCUITPY_CONSOLE_UART_TX/RX
2022-09-10 21:33:29 -04:00
microDev
8cd4b9fc04
fix espressif run modes
2022-09-10 18:08:09 +05:30
Kong Wai Weng
2fbb3090e2
Changed the pins assignment.
2022-09-09 16:50:14 +08:00
Lee Atkinson
f279a2dbb2
Merge branch 'adafruit:main' into adcdma
2022-09-08 11:46:01 -04:00
Dan Halbert
dd37c81136
Merge pull request #6847 from dhalbert/status-bar-control
...
Allow enabling and disabling of status bar
2022-09-08 10:48:36 -04:00
Dan Halbert
58b00467c4
Merge pull request #6878 from dhalbert/weak-board-defs
...
Use MP_WEAK for default board.c routines
2022-09-08 10:47:08 -04:00
Dan Halbert
4cb69a51d5
Use MP_WEAK for default board.c routines
2022-09-08 07:36:50 -04:00
