djsundog/circuitpython
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
19,681 Commits 21 Branches 274 Tags 785 MiB
6c32a1f67f
Commit Graph

158 Commits

Author SHA1 Message Date
Jeff Epler
24f4d981bd
Merge pull request #4380 from jepler/rp2040-audiomp3 
raspberrypi: Enable mp3 playback
 2021-03-11 12:53:46 -06:00
Jeff Epler
16bfe3b41c raspberrypi: RTC: Ensure a time is set 
Until a time is set, the RTC is not running, and rtc_get_datetime()
returns false without assigning to the out-parameter.

In CircuitPython, this would manifest as arbitrary values being returned,
since uninitialized storage on the stack was being converted into a timestamp.
 2021-03-10 20:20:40 -06:00
Jeff Epler
c95def0b32 raspberrypi: Enable mp3 playback 
The rp2040 is _very_ marginal for mp3 playback, and currently sometimes triggers a bug that gives garbled audio output.  However, it does work for some limited situations.
 2021-03-10 18:44:10 -06:00
hathach
58fb011070 clean up 2021-03-10 19:03:27 +07:00
hathach
d1c6bb0927 rp2040 add double reset to uf2, also update pico-sdk to 1.1.0 2021-03-10 18:58:23 +07:00
Jeff Epler
cd1f19020f raspberrypi: move landmine Makefile comments 2021-03-05 12:59:55 -06:00
Jeff Epler
2ae1e7de61 WIPrp2040: Implement IncrementalEncoder 
Any two consecutive pins can be used for an IncrementalEncoder

Testing performed: Put a synthesized (few hundred counts per second) quadrature signal into GP2/3 and read the encoder out.  Performed filesystem operations at the same time to stress test it.

The reasons for not using common_hal_rp2pio_statemachine_readinto are commented on.
 2021-03-05 10:31:29 -06:00
Jeff Epler
bc14ed31f6 StateMachine.h: Add header for declaration of mcu_pin_obj_t typedef 2021-03-04 12:28:46 -06:00
Jeff Epler
c023ec03ff PDMIn: Add missing deinit call 2021-03-04 12:28:06 -06:00
Jeff Epler
bd01d31542 rp2pio: Add pins_are_sequential 
This can be used where the standard API calls for a list of pins, to check that they satisfy the requirements of the rp2pio state machine, e.g.,
```python
    def __init__(self, pin_a, pin_b):
        if not rp2pio.pins_are_sequential([pin_a, pin_b]):
            raise ValueError("Pins must be sequential")
```
 2021-03-04 11:26:33 -06:00
Jeff Epler
ff62b0d2c0 StateMachine: Add pull up/down for inputs 2021-03-04 11:26:29 -06:00
Jeff Epler
68ac14b309 StateMachine: Add in_available property 
I named the property `in_available` because it is similar to pyserial.
However, it indicates the number of words in the fifo, not the number
of bytes.
 2021-03-04 11:14:09 -06:00
hathach
6f99026a64 rp2040 use normal usb_irq_handler() 2021-03-04 21:29:04 +07:00
Dan Halbert
71c43ca2dd
Merge pull request #4319 from jepler/feather-default-uart 
feather rp2040: enable default board.UART
 2021-03-03 16:46:00 -05:00
Jeff Epler
b0fca4fcda feather rp2040: enable default board.UART 2021-03-03 13:13:06 -06:00
Dan Halbert
cd48c5ee83
Merge pull request #4315 from dhalbert/rp2040-i2c-short-writes 
RP2040: Implement short I2C writes (2 bytes or less) using bitbangio
 2021-03-03 12:42:47 -05:00
Scott Shawcroft
514b73bcf8
Merge pull request #4254 from gamblor21/rp2040_countio 
Rp2040 countio
 2021-03-03 08:47:24 -08:00
Scott Shawcroft
1d8933dd05
Merge pull request #4265 from DavePutz/pio_soft_reset 
Clear out PIOs and State Machines on RP2040 soft reset
 2021-03-03 08:43:57 -08:00
Dan Halbert
fb7a0f7efc add 1sec timeouts for I2C read and write 2021-03-03 09:43:57 -05:00
gamblor21
98075c5255 Fixed merge 2021-03-02 22:32:59 -06:00
Dan Halbert
e3ab394cd6 works on nearly all sensors 2021-03-02 23:27:37 -05:00
Dan Halbert
4167778bbc
Merge pull request #4312 from jepler/feather-rp2040-led 
feather rp2040: add board.LED
 2021-03-02 23:19:14 -05:00
Mark
37ee18349f
Merge branch 'main' into rp2040_countio 2021-03-02 19:47:53 -06:00
gamblor21
4246cc3f6d Counter and PWMOut slice conflict check 2021-03-02 19:32:06 -06:00
Jeff Epler
b27afad9cb move LED to the right spot in the file 2021-03-02 19:02:38 -06:00
Jeff Epler
efc2667b5f
Merge pull request #4186 from jepler/update-protomatter-rp2 
Enable protomatter on RP2040 builds
 2021-03-02 19:01:37 -06:00
Dan Halbert
15615effc2
Merge pull request #4276 from bergdahl/patch-1 
Update StateMachine.c
 2021-03-02 17:11:45 -05:00
Dan Halbert
f31b472309 Merge remote-tracking branch 'adafruit/main' into rp2040-i2c-short-writes 2021-03-02 15:17:12 -05:00
Dan Halbert
9939c59caa wip 2021-03-02 15:16:55 -05:00
Jeff Epler
8bfd308d37 feather rp2040: add board.LED 2021-03-02 13:16:09 -06:00
Scott Shawcroft
ce70b95990
Merge pull request #4177 from microDev1/nvm-rp 
RP2040: Support for NVM
 2021-03-02 09:57:36 -08:00
Dan Halbert
f41fb6fafc
Apply suggestions from code review 
copyediting
 2021-03-02 12:01:50 -05:00
Scott Shawcroft
2651e15a52
Merge pull request #4309 from jepler/rp2040-interrupt-pio 
rp2pio: allow keyboard interrupt while waiting for tx fifo to empty (& stall)
 2021-03-02 08:55:27 -08:00
Jeff Epler
f560b5f3a3 raspberry: switch pico back to the boot2 for W25Q16 
Presumably, switching it to generic hurt performance a bit.

I verified that the build-raspberry_pi_pico/boot2_padded_checksummed.S
built file has the same checksum as the old
bs2_default_padded_checksummed.S
 2021-03-02 08:08:41 -06:00
microDev
b029031286
minor structural modification 2021-03-02 14:36:28 +05:30
Jeff Epler
5a00862b1d raspberrypi: allow directly specifying the original boot .S file 
.. all the necessary steps to transform it into a padded, checksummed
file are now done by the build system.

Since it is assigned by "?=", it _should_ be the case that individual
builds can override it.

I did not "test" this per se, but it gives the same content and checksum
(except for the identifying comment with a path) as #4302.
 2021-03-01 21:08:19 -06:00
Jeff Epler
4b63a8c9b4 rp2pio: allow keyboard interrupt while waiting for tx fifo to empty (& stall) 2021-03-01 21:07:04 -06:00
Scott Shawcroft
21a8752166
Merge pull request #4297 from adafruit/tannewt-patch-1 
Update flash sizes for Adafruit RP2040 boards
 2021-03-01 13:19:50 -08:00
Jeff Epler
238484ec26 Merge remote-tracking branch 'origin/main' into update-protomatter-rp2 2021-03-01 15:18:32 -06:00
Scott Shawcroft
532e7db293
Merge pull request #4267 from dhalbert/rp2040-digitalinout-fixes 
RP2040: change DigitalInOut direction only when necessary; strong drive strength
 2021-03-01 13:14:13 -08:00
Scott Shawcroft
af9dfccab1
Update QT Py flash size 2021-03-01 10:34:25 -08:00
Scott Shawcroft
dac047db61
Update Feather RP2040 to 8MB 2021-03-01 10:33:04 -08:00
gamblor21
d7bc8a46a5 Added counters per slice 2021-02-27 15:17:27 -06:00
root
29c89a2487 Removed more includes 2021-02-26 22:35:38 -06:00
root
f3515502b7 Removed unecessary includes 2021-02-26 22:33:50 -06:00
root
6374408c06 Changed reset_rp2pio_statemachine to clean up any PIO interrupts. 2021-02-26 22:28:50 -06:00
Jonny Bergdahl
f7eac46c78
Update StateMachine.c 
Changed woring to use max instead
 2021-02-27 00:07:30 +01:00
Scott Shawcroft
776301c932
Typo fix: direcion -> direction 2021-02-26 15:03:56 -08:00
Scott Shawcroft
888a0c5f08
Merge pull request #4224 from microDev1/busio-uart-rp 
RP2040: Support for UART
 2021-02-26 14:57:23 -08:00
Dan Halbert
d9234ffa82 need to gpio_set_dir() at some point 2021-02-26 15:27:35 -05:00